Benutzeranleitung / Produktwartung CMT-EP707 Operating Instructions (CMTEP707) des Produzenten Sony
Zur Seite of 24
Micr o Hi-Fi Component System Operating Instructions Owner’s Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
2 GB WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
3 GB * For European model only T able of Contents List of Button Locations and Reference Pages Main unit ............................................... 4 Remote control ...................................... 5 Getting Started Hooking up the system ..
4 GB List of Button Locations and Reference Pages Main unit P – Z PGM CLEAR 8 (9 ) PHONES jack ql PLAY MODE wa ( 8, 9) PRESET +/– qd ( 10, 11) Remote sensor wd TAPE 2 (1 3) TUNER 6 (10, 11, 14) TU.
List of Button Locations and Reference Pages 5 GB ALPHABETICAL ORDER A – M CD qa ( 8, 9) CLOCK/TIMER ON/OFF 2 (15, 17) CLOCK/TIMER SET 3 (7, 15, 16) DISC SKIP 7 (8 ) DISPLAY 6 (12, 17, 19) ENTER qg .
6 GB 2 Connect the AM antenna. Set up the AM loop antenna, then connect it. 1 Connect the speakers. Connect the speaker cords to the SPEAKER terminals as shown below. Getting Started Hooking up the system Do the following procedure 1 to 4 to hook up your system using the supplied cords and accessories.
Getting Started 7 GB Inserting two size AA (R6) batteries into the remote Tip When the remote no longer operates the system, replace both batteries with new ones. Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage.
8 GB CD Loading the CD 1 Press DISC 1 – 3 Z . The disc tray opens. 2 Place a CD with the label side up on the tray. To load other CDs, press a different Z and place the CD in the disc tray.
CD 9 GB Programing the CD tracks — Program Play You can make a program of up to 25 tracks in the order you want them to be played. 1 Press CD, then place a CD. 2 Press PLAY MODE repeatedly in stop mode until “ PROGRAM ” appears in the display. 3 Press DISC 1 – 3 to select a CD.
10 GB Setting presets through automatic tuning 1 Press TUNER (TUNER/BAND on the remote) repeatedly to select “ FM ” or “ AM ” . 2 Turn and hold TUNING +/ – (or press and hold TUNING + or TUNING – on the remote) until the frequency indication starts to change, then release it.
Tuner 11 GB To change the AM tuning interval (except for the European model) The AM tuning interval is factory-set to 9 kHz (10 kHz in some areas). To change the AM tuning interval, press and hold TUNER MEM on the unit for 4 seconds or more while the system is turned off.
12 GB Using the Radio Data System (RDS) (continued) Receiving RDS broadcasts Simply select a station from the FM band. When you tune in a station that provides RDS services, “ RDS ” appears in the display.
Tape 13 GB Tape Loading a tape 1 Press Z PUSH OPEN/CLOSE. 2 Insert a tape in deck with the side you want to play/record facing up. Playing a tape You can use TYPE I (normal), TYPE II (CrO 2 ) or TYPE IV (metal) tape. 1 Load a recorded tape. 2 Press TAPE.
14 GB Steps Recording from a CD (CD Synchro Recording) Recording from the radio (or a connected component) manually 1 Load a blank tape. 2 Press DISC 1 – 3 Z . 3 Load the CD you want to record. 4 Press z REC PAUSE/START. The deck stands by for recording.
Tape 15 GB Recording a CD by specifying track order — Program Edit 1 Load a recordable tape. 2 Program CD tracks following steps 1 to 6 in “ Programing the CD tracks ” on page 9. 3 Press z REC PAUSE/START. The tape deck stands by to record. The CD player stands by for playback.
16 GB Waking up to music — Daily Timer You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the clock” page 7). 1 Prepare the sound source you want to play. • CD: Place a CD. • Tape: Insert a tape with the side you want to play on facing up.
Display 17 GB 5 Set the starting time. Press PRESET/CLOCK/TIMER + or – on the remote repeatedly to set the hour, then press ENTER. The minute indication begins flashing next. Press PRESET/CLOCK/TIMER + or – on the remote repeatedly to set the minute, then press ENTER.
18 GB Optional Components Hooking up optional components You can connect a digital or an analogue component to this system. Optional analogue component A MD IN jacks Use audio cords (not supplied) to connect an optional component (such as an MD player) to these jacks.
Troubleshooting 19 GB The remote does not function. • There is an obstacle between the remote and the system. • The remote is not pointing in the direction of the system ’ s sensor. • The batteries have run down. Replace the batteries. The color irregularity on a TV screen persists.
20 GB The disc tray does not open and “ CD ERR 1 ” or “ CD ERR 2 ” appears. • A foreign object is caught in the drive. Remove it, turn the system off, and turn the system on again. Tape Deck The tape does not record. • No tape in the cassette compartment.
Additional Information 21 GB On operation • If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the CD player. Should this occur, the system will not operate properly.
22 GB Specifications AUDIO POWER SPECIFICATIONS: (U.S.A. model only) POWER OUTPUT AND TOTAL HARMONIC DISTORTION: with 4 Ω loads both channels driven, from 120 - 10,000 Hz; rates 15 W per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 mW to rated output.
Additional Information 23 GB Speaker Speaker system Bass-reflex type Speaker units Woofer: 10 cm, cone type Tweeter: 5 cm, cone type Nominal impedance 4 Ω Dimensions (w/h/d) Approx.
24 GB Sony Corporation Printed in China.
Ein wichtiger Punkt beim Kauf des Geräts Sony CMT-EP707 Operating Instructions (CMTEP707) (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony CMT-EP707 Operating Instructions (CMTEP707) noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony CMT-EP707 Operating Instructions (CMTEP707) - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony CMT-EP707 Operating Instructions (CMTEP707) reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony CMT-EP707 Operating Instructions (CMTEP707) erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony CMT-EP707 Operating Instructions (CMTEP707) besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony CMT-EP707 Operating Instructions (CMTEP707) verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony CMT-EP707 Operating Instructions (CMTEP707). Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony CMT-EP707 Operating Instructions (CMTEP707) gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
