Benutzeranleitung / Produktwartung BKM-B10 des Produzenten Sony
Zur Seite of 161
.............. ......... .................... SER VICE MANU AL .............. ......... .................... MODEL DEST . CHASSIS NO. MODEL DEST . CHASSIS NO.
W ARNING!! AN INSULA TED TRANSFORMER SHOULD BE USED DURING ANY SER VICE TO A V OID POSSIBLE SHOCK HAZARD, BE- CAUSE OF LIVE CHASSIS. THE CHASSIS OF THIS RECEIVER IS DIRECTL Y CONNECTED T O THE AC PO WER LINE.
For the customers in the Netherlands Voor de klanten in Nederland Dit apparaat bevat een CR2025 batterij voor memory back-up. Raadpleeg uw leverancier over de verwijdering van de batterij op het moment dat u het apparaat bij einde levensduur afdankt. Gooi de batterij niet weg.
CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manuf acturer . Dispose of used batteries according to the manuf acturer ’ s instr uctions. V orsicht! Explosionsgefahr bei unsachgem äß em A ustausch der Batterie.
1 PFM-42B1, PFM-42B1E Table of Contents 1. Operating Instructions ................................................... 1-1 2. Service Informations 2-1. Board Layout .......................................................................................
2 PFM-42B1, PFM-42B1E 4. Trouble Shooting 4-1. Judging Method When Image Does Not Appear ........................................ 4-1 4-2. Self Diagnosis Function .............................................................................. 4-2 4-2-1.
3 PFM-42B1, PFM-42B1E B (4/13) .................................................................................................. 8-10 B (5/13) .................................................................................................. 8-11 B (6/13) .
.
1-1 PFM-42B1, PFM-42B1E Section 1 Operating Instructions This section is extracted from operation manual. PFM-42B1/42B1E 4-080-938- 01 (1) 2000 Sony Corporation Operating Instructions GB PFM-42B1 .
1-2 PFM-42B1, PFM-42B1E 2 (GB) W ARNING Owner ’ s Record The model and serial numbers are located on the rear. Record the model and serial numbers in the spaces provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product.
1-3 PFM-42B1, PFM-42B1E 4 (GB) Reducing Afterimage/Ghosting (Screen Saver Function) .................................... 31 (GB) Reversing the Image .............................................. 31 (GB) Changing the Display Position Automatically ...
1-4 PFM-42B1, PFM-42B1E 6 (GB) Features Features The PFM-42B1/42B1E series are 16:9 42-inch flat panel monitors utilizing a PDP (Plasma Display Panel), which can accept various types of signals with the built-in scan converter.
1-5 PFM-42B1, PFM-42B1E 8 (GB) Location and Function of Parts and Controls 1 (standby) Switch / Indicator Section 1 1 (standby) switch Press to turn on the monitor. Press again to go back to the standby mode. 2 STANDBY indicator Lights up in red in the standby mode.
1-6 PFM-42B1, PFM-42B1E 10 (GB) Location and Function of Parts and Controls Remote Commander RM-42B 1 POWER ON switch Press to turn on the monitor. 2 DISPLAY button Displays the input signal information and the time at the top of the monitor screen. Press again to clear it.
1-7 PFM-42B1, PFM-42B1E 12 (GB) Caution / Connections Wall 2 ( 13 / 16 ) When using the monitor horizontally Front 25 (9 7 / 8 ) 25 (9 7 / 8 ) 10 (4) 10 (4) Wall Wall Wall Wall Side 2 ( 13 / 16 ) Wall.
1-8 PFM-42B1, PFM-42B1E 14 (GB) Using On-screen Menus Using On-screen Menus Operating Through Menus Menu operating buttons Use the buttons on the monitor or the Remote Commander for menu operations. The buttons on the control button section are used for purposes of explanation in this operating instructions.
1-9 PFM-42B1, PFM-42B1E 16 (GB) Using On-screen Menus qk W-VGA Select ON to input the W-VGA (852 × 480) signal. When you set this item to ON, the VGA input signal is determined to be 852 × 480. Otherwise, the VGA input signal is determined to be 640 × 480.
1-10 PFM-42B1, PFM-42B1E 18 (GB) Watching the Picture 3 Press v / V to move the cursor ( B ) to the input source to be displayed and press ENTER. INPUT1 RGB: Selects the audio and video signal input from the INPUT1 connectors when the input signal is an RGB signal.
1-11 PFM-42B1, PFM-42B1E 20 (GB) Watching the Picture Input Signal and Monitor Status Information Display Input signal and monitor status information is displayed on the monitor screen for about five seconds when the power is turned on or when switching the input signal.
1-12 PFM-42B1, PFM-42B1E 22 (GB) Adjusting the Picture While watching the picture, you can adjust contrast, brightness, chroma, phase, and so on, to suit your taste. The adjustments can be carried out for each input signal separately. You can also store the adjusted levels in memory.
1-13 PFM-42B1, PFM-42B1E 24 (GB) 2 Press v / V . “ NO ” changes to “ YES ” . ENTER MENU RESET : YES SELE CT S ET E N D 3 Press ENTER. The PIC CONTROL menu items are restored.
1-14 PFM-42B1, PFM-42B1E 26 (GB) 3 Press ENTER. The original picture size and position are restored. To cancel the reset function Press MENU before pressing ENTER. Changing the Aspect Ratio This monitor can display images in various aspect ratios, such as the normal 4:3 TV program ratio, a widescreen image, etc.
1-15 PFM-42B1, PFM-42B1E 28 (GB) Using the Memory Function You can save the current picture setting for each input signal using the MEMORY function. The saved settings can be restored whenever necessary. The items in the PIC CONTROL and PIC SIZE menus can be memorized.
1-16 PFM-42B1, PFM-42B1E 30 (GB) Selecting the On-screen Language You can select the on-screen language from among English, German, French, Italian, Spanish or Japanese.
1-17 PFM-42B1, PFM-42B1E 32 (GB) To set the change to the standby mode at the END TIME 1 After selecting AUTO for PIC INVERSION mode, select POWER OFF and press ENTER. The following menu appears on the monitor screen. ENTER MENU PIC IN V E R SIO N : A U T O PO WER OF F : N O SEL ECT SET END 2 Select YES with v / V and press MENU.
1-18 PFM-42B1, PFM-42B1E 34 (GB) On/Off Timer Function 1 In the CONFIG (1/2) menu, Press v / V to move the cursor ( B ) to “ POWER CONTROL ” and press ENTER.
1-19 PFM-42B1, PFM-42B1E 36 (GB) To change the index number You can change the index number if necessary. When you change the number, use the buttons on the control button section of the monitor. 1 Press MENU. The main menu appears on the monitor screen.
1-20 PFM-42B1, PFM-42B1E 38 (GB) Specifications ............................................................................................................................... .......................................................................... Specifications Video processing Preset signal See page 21 (GB).
.
2-1 PFM-42B1, PFM-42B1E Section 2 Service Informations 2-1. Board Layout B1 YB YA QA (BKM-B10) B F T S S S S SWITCHING REGULA TOR (APS-132 M).
2-2 PFM-42B1, PFM-42B1E 2-2. Disassembly 2-2-1. QA Board (BKM-B10) Removal 3 T wo screws ( + PSW3 x 8) 1 Loosen two panel stopper screws. Connector 2 QA board (BKM-B10) BKM-B10 is available separately for AEP model.
2-3 PFM-42B1, PFM-42B1E 2-2-2. Rear Cover Assy Removal 3 Fourteen screws ( + BVTP4 x 16) 4 Four screws ( + BVTP4 x 16) 1 Four screws ( + PSW6 x 20) 5 T wo screws ( + PSW3 x 8) 6 Screw ( + PSW3 x 8) 7 .
2-4 PFM-42B1, PFM-42B1E 2-2-3. Bezel Assy and YA, YB Boards Removal 5 Eighteen screws ( + BVTP4 x 16) 6 Main chassis 9 Filter bracket (V) 8 T wo screws ( + BVTP4 x 16) 1 Screw ( + BVTP4 x 16) 3 T wo s.
2-5 PFM-42B1, PFM-42B1E 2-2-4. B Block Assy Removal 4 Screw ( + PS3 x 6) 1 Four screws ( + BVTP3 x 12) 2 S/C cover Cushion Remove the lithium battery in the direction of arrow .
2-6 PFM-42B1, PFM-42B1E 2-2-5. B and B1 Boards Removal * Remove the B block assy. (Refer to 2-2-4.) 7 Fan bracket 0 B1 board 8 Six screws ( + PS3 x 6) 1 Three screws ( + PS3 x 6) 6 Screw ( + PS3 x 6) .
2-7 PFM-42B1, PFM-42B1E 2-2-6. Extention Board Connection S/C cover B1 board Connector (CN6102) Extension board (Mounted circuit board, Z Part No : A-1391-125-A).
2-8 PFM-42B1, PFM-42B1E 5 Screw ( + PSW4 x 8) GND CN1 CN5 CN4 CN6 CN8 CN7 4 Five screws ( + PSW3 x 8) 1 Screw ( + PSW4 x 16) 2 S board 3 S board bracket 6 Power supply assy Cushion 2-2-7.
2-9 PFM-42B1, PFM-42B1E 2-2-8. Switching Regulator (APS-132 M board) Removal * Remove the Power supply assy. (Refer to 2-2-7.) 7 Nine screws ( + PSW4 x 8) 3 Screw ( + PSW3 x 6) 1 Screw ( + PSW3 x 6) 2.
2-10 PFM-42B1, PFM-42B1E 2-2-9. T Board Removal * Remove the Power supply assy. (Refer to 2-2-7.) 1 T wo screws ( + PSW3 x 6) 2 T board Cushion CN4 CN7 CN5 CN6 CN1 CN2 CN3 CN41 CN42 CN12 T wo hooks.
2-11 PFM-42B1, PFM-42B1E 2-2-10. Plasma Display Panel Unit Removal (1/2) * Remove the Bezel assy. (Refer to 2-2-3.) * Remove the B block assy. (Refer to 2-2-4.) * Remove the Power supply assy. (Refer to 2-2-7.) * Remove the T board. (Refer to 2-2-9.) Remove those parts according to numbers 1 1 1 1 1 through @/ @/ @/ @/ @/ .
2-12 PFM-42B1, PFM-42B1E 2-2-10. Plasma Display Panel Unit Removal (2/2) Remove the parts according to numbers @- @- @- @- @- through @ @ @ @ @ . Change toward of the DC/DC converter as shown. Attach the DC/DC converter according to numbers @; @; @; @; @; through #/ #/ #/ #/ #/ .
2-13 PFM-42B1, PFM-42B1E 2-2-11. Plasma Display Panel Unit Packing When Sending it to FUJITSU 3 Eight screws (M5 x 50) ! Outer box (Cap) 8 Inner box (Cap) 7 Upper pad (B) 9 T wo joint parts 0 T wo joi.
.
3-1 PFM-42B1, PFM-42B1E Section 3 Electrical Adjustments 3-1. Equipment Required . Oscilloscope Tektronix 2465 or equivalent (band width : 350 MHz or more) . VG (Programmable video signal generator) VG814 or equivalent . Frequency counter Advantest TR5821AK or equivalent .
3-2 PFM-42B1, PFM-42B1E SERVICE MENU 1. EEPROM RESET EEPROM Configuration Table 1 shows the configuration of EEPROM. The entire area or the respective areas of the EEPROM can be separately initialized. Menu Structure Select the desired area of EEPROM to be initialized using the following menu.
3-3 PFM-42B1, PFM-42B1E WHITE BALANCE WINDOW COLOR TEMP RED GAIN GREEN GAIN BLUE GAIN : OFF : HIGH : 255 : 255 : 255 2. WHITE BALANCE Menu Structure Adjust the white balance of the desired color temperature by selecting the items of the WHITE BALANCE menu and by adjusting the R, G, B gain of the digital gamma circuit.
3-4 PFM-42B1, PFM-42B1E 4. VIDEO PROCESSOR Menu Structure The following items of the video processor can be adjusted using this menu. However, all items of the video processor have the default values on which normal operations are per- formed. Therefore, the video processor normally needs no adjustment.
3-5 PFM-42B1, PFM-42B1E c) AUTO PLL PIXEL Selects the functions that are automatically adjusted when PIXEL ADJUST is executed. ON : Both the TOTAL H PIXEL and DOT PHASE are automatically adjusted.
3-6 PFM-42B1, PFM-42B1E 6. PRESET EDIT Preset Data Configuration Memory map of the preset data area is shown in Table 1 (PROG. PRESET/FIXED PRESET). The areas from 1 to 20 are assigned to store the additional signal. The areas from 21 to 74 are assigned to store the internal signal.
3-7 PFM-42B1, PFM-42B1E a) ORIGINAL DATA SELECT Menu Structure Select the source data that is used for editing. Then the selected source data is copied to the Editing RAM.
3-8 PFM-42B1, PFM-42B1E b) DATA EDIT Menu Structure The following items of the source data that is copied to the Editing RAM can be modified as described below. Note : A maximum of 8 lines of the above menu can be displayed on screen. The other menu items can be displayed by scrolling the display by moving the cursor up or down.
3-9 PFM-42B1, PFM-42B1E INPUT SELECT : 0 0 0 0 0 0 0 0 YUV3 RGB1 RGB2 YUV1 DV Y/C LINE YUV2 SYNC POL (H/V) : NEGA/NEGA Horizontal sync polarity V ertical sync polarity (1) INPUT SELECT The input signals that are acceptable to the PFM-42B1/ B1E are set.
3-10 PFM-42B1, PFM-42B1E (14) INTERLACE MODE Whether the input signal is interlaced or not is set. ON : When the input signal is the interlaced signal. OFF : When the input signal is not the interlaced signal. (15) FIELD MODE Whether the interlaced signal is processed within a field or within a frame, is set.
3-11 PFM-42B1, PFM-42B1E (25) AUTO PLL Whether the user menu adjustment PIXEL ADJUST is enabled or disabled, is set. ON : The user menu adjustment PIXEL ADJUST is enabled. OFF : All items of the adjustment PIXEL ADJUST show the indication [ ___ ]. The user menu adjustment PIXEL ADJUST is disabled.
3-12 PFM-42B1, PFM-42B1E ST A TUS/TEST SIGNAL/SYNC POWER SUPPL Y TEMPERA TURE FA N OTHERS SOFTW ARE VERSION TEST FUNCTION 8. STATUS/TEST Menu Structure The internal status of the PFM-42B1/B1E can be checked and its functions can be checked using the STATUS/TEST menu.
3-13 PFM-42B1, PFM-42B1E d) FAN Fan drive circuit: Indicates the operating status of the fan control circuit. OK appears when the fan control circuit is operating normally.
3-14 PFM-42B1, PFM-42B1E Table 1. EEPROM Configuration Area Data Configuration Standard Value COMMON ADC R OFFSET 128 ADC G OFFSET 128 ADC B OFFSET 128 COLOR TEMP RED GAIN (HIGH) 255 GREEN GAIN (HIGH).
3-15 PFM-42B1, PFM-42B1E Area Data Configuration Standard Value PROG. PRESET AREA 1 (PROGRAM 1) EMPTY PRESET PRESET AREA 2 (PROGRAM 2) EMPTY PRESET AREA 3 (PROGRAM 3) EMPTY PRESET AREA 4 (PROGRAM 4) E.
3-16 PFM-42B1, PFM-42B1E Area Data Configuration Standard Value LAST PRESET AREA 1 (PROGRAM 1) EMPTY MEMORY PRESET AREA 2 (PROGRAM 2) EMPTY PRESET AREA 3 (PROGRAM 3) EMPTY PRESET AREA 4 (PROGRAM 4) EM.
3-17 PFM-42B1, PFM-42B1E Area Data Configuration Standard Value USER MEMORY No.1 EMPTY MEMORY MEMORY No.2 EMPTY MEMORY No.3 EMPTY MEMORY No.4 EMPTY MEMORY No.5 EMPTY MEMORY No.6 EMPTY MEMORY No.7 EMPTY MEMORY No.8 EMPTY MEMORY No.9 EMPTY MEMORY No.10 EMPTY MEMORY No.
3-18 PFM-42B1, PFM-42B1E Table 2. Factory Preset Data AREA 29 30 31 32 33 34 35 36 NAME VGA (TEXT) VESA720 x 400@85 VESA800 x 600@56 VESA800 x 600@60 VESA800 x 600@72 VESA800 x 600@75 VESA800 x 600@85.
3-19 PFM-42B1, PFM-42B1E AREA 21 22 23 24 25 26 27 28 NAME VGA-1 VESA640 x 350 VESA640 x 400 VGA Mac13" VESA640 x 480@72 VESA640 x 480@75 VESA640 x 480@85 RESOLUTION 640 x 350 640 x 350 640 x 400 640 x 480 640 x 480 640 x 480 640 x 480 640 x 480 CLOCK 25.
3-20 PFM-42B1, PFM-42B1E AREA 29 30 31 32 33 34 35 36 NAME VGA(TEXT) VESA720 x 400@85 VESA800 x 600@56 VESA800 x 600@60 VESA800 x 600@72 VESA800 x 600@75 VESA800 x 600@85 Mac16" RESOLUTION 720 x 400 720 x 400 800 x 600 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 CLOCK 28.
3-21 PFM-42B1, PFM-42B1E AREA 38 39 40 41 42 43 44 45 NAME VESA1024 x 768@60 VESA1024 x 768@70 VESA1024 x 768@75 VESA1024 x 768@85 VESA1152 x 864@75 Mac21" VESA1280 x 960@60 VESA1280 x 960@85 RESOLUTION 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1152 x 870 1280 x 960 1280 x 960 CLOCK 65 MHz 75 MHz 78.
3-22 PFM-42B1, PFM-42B1E AREA 46 47 48 49 50 51 NAME VESA1280 x 1024@60 VESA1280 x 1024@75 VESA1280 x 1024@85 VESA1600 x 1200@60 PAL NTSC RESOLUTION 1280 x 1024 1280 x 1024 1280 x 1024 1600 x 1200 932 x 573 753 x 483 CLOCK 108 MHz 135 MHz 157.5 MHz 162 MHz 17.
3-23 PFM-42B1, PFM-42B1E AREA 52 53 54 55 56 59 TIMING 575/50P 480/60P 1080/48I 1080/50I 1080/60I 720/60P DOT CLK 72.00MHz 13.889nsec 54.00MHz 18.519nsec 74.25MHz 13.469nsec 74.25MHz 13.469nsec 74.25MHz 13.469nsec 74.25MHz 13.469nsec H PERIOD 32.001 µ sec 2304dots 31.
3-24 PFM-42B1, PFM-42B1E AREA 60 61 62 63 Resolution 852 x 480 856 x 480 at 60Hz 856 x 480 at 60Hz 856 x 480 at 60Hz Pixel Clock 34.0252 [MHz] 33.627 [MHz] 31.500 [MHz] 31.500 [MHz] Horizontal Frequency 31.740 [kHz] 30.240 [kHz] 30.057 [kHz] 30.057 [kHz] Vertical Frequency 60.
3-25 PFM-42B1, PFM-42B1E 3-3. White Balance Adjustment 1. Switch the WINDOW to either TYPE1 or TYPE2. 2. Select the COLOR TEMP “HIGH”. 3. Select RED GAIN and GREEN GAIN. Perform the white balance adjustment until the color temperature satisfies the specifications of 9300 K.
3-26 PFM-42B1, PFM-42B1E 3-5. Video Processor Adjustment YUV Level Check and Adjustment Note: Be sure to use the Z MOUNT (extension board). 1. Connect the YUV 480/60 signal to the INPUT-1 connector. 2. Select the color bar signal. 3. Measure the voltage waveform at pin-14 of IC1003 on the B board with an oscilloscope.
3-27 PFM-42B1, PFM-42B1E 3-7. Switching Regulator (APS-132 M Board) Adjustments 3-7-1. Preparation 1. Remove the switching regulator from the set, and adjust it under no load. 2. If adjusting the switching regulator with each output loaded, set as follows.
3-28 PFM-42B1, PFM-42B1E 3-7-10. VA Adjustment 1. Open the load on VS and VA outputs, and set the load on the other outputs to the minimum. 2. Apply 100 V AC. 3. Turn the STBY signal ON (short between CN7 pin-1 and pin-2), and also the VRR signal ON (short be- tween CN4 pin-7 and CN7 pin-2).
4-1 PFM-42B1, PFM-42B1E Section 4 Trouble Shooting 4-1. Judging Method When Image Does Not Appear 1. Flow chart 2) As input signals, H.SYNC (negative polarity), V.SYNC (negative polarity), BLANKING (negative polarity), CLOCK and RGB digital data (8 bit x 3) must be entered normally and DISPEN must be “high”.
4-2 PFM-42B1, PFM-42B1E 4-2. Self Diagnosis Function 4-2-1. Outline The PFM-42B1/B1E has the self diagnosis function using A/D converter to detect the power supply analog voltages, 8 channels of temperature sensor, fan operations, power unit temperature, DC voltage status, and to check the EEPROM and the watch register.
4-3 PFM-42B1, PFM-42B1E 6. Detection of at the left side of panel temperature (Name of this function on the service menu : TEMPERATURE - PANEL SIDE) Occurrence of abnormality and fault is judged solely from the internal temperature of the PFM-42B1/B1E.
.
5-1 PFM-42B1, PFM-42B1E Section 5 Semiconductors 24LC21A/SN BA10358F-E2 BA10358F-T2 BA10393F-E2 CXA1211M-T4 LM1881MX M24C04-WMN6T M24C64-WMN6T(A) MM1113XFBE NJM2903M-T2 NJU7032M-TE2 ST49C101ACF8-05-TR.
5-2 PFM-42B1, PFM-42B1E IC, T ransistor PQ07VZ012P 1 2 3 PQ30RV11 1 4 PQ30RV31 1 2 3 4 PQ3TZ53U 1 5 PW164-20WK BOTT O M VIEW 1 A 352pin PGA RPM6940-V4 1 2 3 1 : R OUT 2 : GND 3 : Vcc RS5C348A-E2 1 TOP.
5-3 PFM-42B1, PFM-42B1E 2SJ377(TE16L) S D G 2SK1590-T1B S G D 2SK2370(2) G D S 2SK3142-01 2SK3212-01 G D S 02CZ10-TE85L 02CZ12-TE85L MA3100-TX 1 2 3 1 2 3 05NH46 CA THODE ANODE 1SS226-TE85L MA157-TX 1 2 3 1 2 3 1SS355TE-17 DTZ4.7B HVU359TRF MA111-TX RD12SB2 RD5.
.
6-1 PFM-42B1, PFM-42B1E Section 6 Spare Parts • Items marked “ * ” and parts marked with “ o ” at SP (Supply Code) column of the spare parts list are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items.
6-2 PFM-42B1, PFM-42B1E Cover 6-2. Exploded Views 2 1 13 12 3 14 24 19 23 21 17 15 18 16 4 5 6 8 9 8 9 10 10 11 7 BKM-B10 Blank panel ( AEP Only ) Available separately (AEP Only) +BVTP 4x16 +BVTP 4x16.
6-3 PFM-42B1, PFM-42B1E Cover No. Part No. SP Description 1 X-4038-606-1 s BEZEL ASSY (SILVER) 1 X-4038-606-2 s BEZEL ASSY (GRAY) 2 1-758-596-11 o GLASS, OPTICAL FILTER 3 A-1373-841-A o MOUNTED CIRCUI.
6-4 PFM-42B1, PFM-42B1E Chassis 103 104 104 105 107 107 110 109 108 118 105 108 102 101 111 108 112 115 116 114 113 106 118 105 118 118 105 106 117 103 104 103 A A PANEL,PLASMA DISPLAY FPF42C128128UA-.
6-5 PFM-42B1, PFM-42B1E Chassis No. Part No. SP Description 101 A-1391-081-A o MOUNTED CIRCUIT BOARD, T 102 4-049-122-01 s RIVET 103 4-081-421-01 o BRACKET, S PWB 104 A-1391-080-A o MOUNTED CIRCUIT BO.
6-6 PFM-42B1, PFM-42B1E Packing Materials 207 206 202 208 213 209 211 210 201 202 212 204 203 204 205.
6-7 PFM-42B1, PFM-42B1E Packing Materials No. Part No. SP Description 201 4-080-651-01 o INDIVIDUAL CARTON 202 3-704-066-01 o HANDLE (B) 203 4-080-652-01 o TRAY 204 3-674-673-01 o STOPPER (A) 205 4-08.
6-8 PFM-42B1, PFM-42B1E ------- B BOARD ------- Ref. No. or Q’ty Part No. SP Description 1pc A-1136-195-A o MOUNTED CIRCUIT BOARD, B 1pc 1-251-093-11 s SOCKET,IC BAT500 1-550-104-11 s HOLDER,BATTERY.
6-9 PFM-42B1, PFM-42B1E (B BOARD) Ref. No. or Q ’ ty Part No. SP Description C274 1-164-004-11 s CAPACITOR,CERAMIC 0.1MF/25V C275 1-164-004-11 s CAPACITOR,CERAMIC 0.1MF/25V C276 1-164-004-11 s CAPACITOR,CERAMIC 0.1MF/25V C277 1-126-396-11 s CAPACITOR,ELECT 47MF/16V(CHIP) C279 1-164-004-11 s CAPACITOR,CERAMIC 0.
6-10 PFM-42B1, PFM-42B1E (B BOARD) Ref. No. or Q ’ ty Part No. SP Description C1002 1-107-781-11 s CAPACITOR,ELECT 47MF/16V(BP) C1003 1-164-004-11 s CAPACITOR,CERAMIC 0.1MF/25V C1004 1-107-781-11 s CAPACITOR,ELECT 47MF/16V(BP) C1005 1-164-004-11 s CAPACITOR,CERAMIC 0.
6-11 PFM-42B1, PFM-42B1E (B BOARD) Ref. No. or Q ’ ty Part No. SP Description C1122 1-164-004-11 s CAPACITOR,CERAMIC 0.1MF/25V C1123 1-164-004-11 s CAPACITOR,CERAMIC 0.1MF/25V C1124 1-126-396-11 s CAPACITOR,ELECT 47MF/16V(CHIP) C1125 1-164-004-11 s CAPACITOR,CERAMIC 0.
6-12 PFM-42B1, PFM-42B1E (B BOARD) Ref. No. or Q ’ ty Part No. SP Description C1245 1-164-004-11 s CAPACITOR,CERAMIC 0.1MF/25V C1246 1-164-004-11 s CAPACITOR,CERAMIC 0.1MF/25V C1247 1-164-004-11 s CAPACITOR,CERAMIC 0.1MF/25V C1248 1-164-004-11 s CAPACITOR,CERAMIC 0.
6-13 PFM-42B1, PFM-42B1E (B BOARD) Ref. No. or Q ’ ty Part No. SP Description C4096 1-126-398-11 s CAPACITOR ELECT 4.7MF/35V(CHIP C4097 1-163-145-00 s CAPACITOR,CHIP CERAMIC 1500PF C4098 1-164-004-11 s CAPACITOR,CERAMIC 0.1MF/25V C4099 1-126-396-11 s CAPACITOR,ELECT 47MF/16V(CHIP) C4100 1-126-392-11 s CAPACITOR,CHIP ELECT100MF/6.
6-14 PFM-42B1, PFM-42B1E (B BOARD) Ref. No. or Q ’ ty Part No. SP Description D948 8-719-073-01 s DIODE MA111-(K8).S0 D1000 8-719-800-76 s DIODE 1SS226 D1001 8-719-800-76 s DIODE 1SS226 D1002 8-719-800-76 s DIODE 1SS226 D1003 8-719-073-01 s DIODE MA111-(K8).
6-15 PFM-42B1, PFM-42B1E (B BOARD) Ref. No. or Q ’ ty Part No. SP Description IC223 8-759-058-58 s IC TC7S04FU-TE85R IC500 8-759-232-46 s IC TC74HC126AF IC501 8-759-635-27 s IC M62352GP IC502 8-759-.
6-16 PFM-42B1, PFM-42B1E (B BOARD) Ref. No. or Q ’ ty Part No. SP Description L4018 1-414-248-11 s INDUCTOR,CHIP 2.2UH L4019 1-416-668-11 s COIL, CHOKE 10UH Q100 8-729-120-28 s TRANSISTOR 2SC1623-L5.
6-17 PFM-42B1, PFM-42B1E (B BOARD) Ref. No. or Q ’ ty Part No. SP Description Q4033 8-729-216-22 s TRANSISTOR 2SA1162-G Q4034 8-729-216-22 s TRANSISTOR 2SA1162-G Q4035 8-729-216-22 s TRANSISTOR 2SA1.
6-18 PFM-42B1, PFM-42B1E (B BOARD) Ref. No. or Q ’ ty Part No. SP Description R444 1-216-025-00 s RESISTOR,CHIP 100 1/10W(2012) R445 1-216-025-00 s RESISTOR,CHIP 100 1/10W(2012) R446 1-216-643-11 s .
6-19 PFM-42B1, PFM-42B1E (B BOARD) Ref. No. or Q ’ ty Part No. SP Description R616 1-216-083-00 s RESISTOR CHIP 27K 1/10W(2012) R617 1-216-097-00 s RESISTOR CHIP 100K 1/10W(2012) R618 1-216-083-00 s.
6-20 PFM-42B1, PFM-42B1E (B BOARD) Ref. No. or Q ’ ty Part No. SP Description R1064 1-216-627-11 s RESISTOR,CHIP 100 1/10W (2012) R1065 1-216-661-11 s RESISTOR,CHIP 2.
6-21 PFM-42B1, PFM-42B1E (B BOARD) Ref. No. or Q ’ ty Part No. SP Description R1194 1-216-077-00 s RESISTOR,CHIP 15K 1/10W(2012) R1195 1-216-025-00 s RESISTOR,CHIP 100 1/10W(2012) R1196 1-216-649-11.
6-22 PFM-42B1, PFM-42B1E (B BOARD) Ref. No. or Q ’ ty Part No. SP Description R4007 1-216-061-00 s RESISTOR CHIP 3.3K 1/10W(2012) R4008 1-216-053-00 s RESISTOR CHIP 1.
6-23 PFM-42B1, PFM-42B1E (B BOARD) Ref. No. or Q ’ ty Part No. SP Description R4132 1-216-295-00 s CONDUCTOR, CHIP (2012) R4133 1-216-677-11 s RESISTOR,CHIP 12K 1/10W(2012) R4134 1-216-677-11 s RESI.
6-24 PFM-42B1, PFM-42B1E ---------------------------------------------- B1 BOARD (Included in B MOUNTED CIRCUIT BOARD) ---------------------------------------------- Ref. No. or Q ’ ty Part No. SP Description C6101 1-128-416-11 s CAPACITOR ELECT 100MF/16V(105C C6102 1-164-004-11 s CAPACITOR,CERAMIC 0.
6-25 PFM-42B1, PFM-42B1E (B1 BOARD) Ref. No. or Q ’ ty Part No. SP Description C6414 1-164-004-11 s CAPACITOR,CERAMIC 0.1MF/25V C6415 1-163-251-11 s CAPACITOR CERAMIC 100PF/50V C6416 1-163-243-11 s CAPACITOR CHIP CERAMIC 47PF/50 CN6101 1-815-258-11 o CONNECTOR, BOARD TO BOARD D6101 8-719-977-95 s DIODE DTZ2.
6-26 PFM-42B1, PFM-42B1E (B1 BOARD) Ref. No. or Q ’ ty Part No. SP Description R6162 1-218-776-11 s RESISTOR CHIP 1M 1/10W (2012) R6163 1-218-776-11 s RESISTOR CHIP 1M 1/10W (2012) R6166 1-216-619-1.
6-27 PFM-42B1, PFM-42B1E -------- QA BOARD -------- Ref. No. or Q ’ ty Part No. SP Description 1pc A-1270-443-A o MOUNTED CIRCUIT BOARD, QA C9501 1-126-964-11 s CAPACITOR, ELECT 10MF/50V C9502 1-126-964-11 s CAPACITOR, ELECT 10MF/50V C9503 1-102-129-00 s CAPACITOR,CERAMIC;50V/0.
6-28 PFM-42B1, PFM-42B1E -------- YA BOARD -------- Ref. No. or Q ’ ty Part No. SP Description 1pc A-1373-841-A o MOUNTED CIRCUIT BOARD, YA C8501 1-164-004-11 s CAPACITOR,CERAMIC 0.1MF/25V C8502 1-125-838-11 s CAPACITOR, CERAMIC 2.2MF/6.3V CN8501 1-506-486-11 s PIN,CONNECTOR 7P D8502 8-719-158-15 s DIODE RD5.
6-29 PFM-42B1, PFM-42B1E <TRANSISTOR> Q105 8-729-047-46 TRANSISTOR FS7KM-16A Q152 8-729-039-41 TRANSISTOR FS10KM-10 Q153 8-729-039-41 TRANSISTOR FS10KM-10 HEAT SINK E ASSY 2-434-993-21 SCREW (3X.
6-30 PFM-42B1, PFM-42B1E C418 1-115-339-11 CERAMIC CHIP 0.1uF 10% 50V C419 1-131-943-11 ELECT 1200uF 30% 200V C420 1-115-339-11 CERAMIC CHIP 0.1uF 10% 50V C422 1-115-339-11 CERAMIC CHIP 0.1uF 10% 50V C423 1-115-339-11 CERAMIC CHIP 0.1uF 10% 50V C500 1-127-822-51 FILM 1uF 10% 420V C501 1-127-835-11 ELECT 22uF 20% 450V C502 1-136-165-00 FILM 0.
6-31 PFM-42B1, PFM-42B1E D500 8-719-988-61 DIODE 1SS355TE-17 D501 8-719-988-61 DIODE 1SS355TE-17 D502 8-719-988-61 DIODE 1SS355TE-17 D503 8-719-988-61 DIODE 1SS355TE-17 D504 8-719-988-61 DIODE 1SS355TE-17 D600 8-719-071-63 DIODE HZU6.
6-32 PFM-42B1, PFM-42B1E <RESISTOR> R100 ! 1-260-131-81 CARBON 470K 5% 1/2W R101 1-240-313-11 CEMENT 4.7 5% 5W R102 1-249-397-11 CARBON 22 5% 1/4W R103 1-240-313-11 CEMENT 4.7 5% 5W R104 1-240-910-11 CEMENT 4.7 5% 5W R105 1-249-407-91 CARBON 150 5% 1/4W R106 1-219-393-11 METAL PLATE 0.
6-33 PFM-42B1, PFM-42B1E R306 1-260-130-91 CARBON 390K 5% 1/2W R307 1-260-130-91 CARBON 390K 5% 1/2W R309 1-216-097-91 RES,CHIP 100K 5% 1/10W R310 1-216-081-00 RES,CHIP 22K 5% 1/10W R311 1-260-130-91 CARBON 390K 5% 1/2W R312 1-260-130-91 CARBON 390K 5% 1/2W R313 1-216-061-00 RES,CHIP 3.
6-34 PFM-42B1, PFM-42B1E R612 1-215-459-00 METAL 39K 1% 1/4W R613 1-215-457-00 METAL 33K 1% 1/4W R614 1-208-795-11 RES,CHIP 3.6K 0.5% 1/10W R615 1-216-057-00 RES,CHIP 2.2K 5% 1/10W R616 1-208-782-11 RES,CHIP 1K 0.5% 1/10W R617 1-216-065-91 RES,CHIP 4.
6-35 PFM-42B1, PFM-42B1E Ref. No. or Q ’ ty Part No. SP Description 1pc 1-476-545-11 s REMOTE COMMANDER (RM-42B) 1pc 9-900-029-01 s BATTERY COVER (RM-42B) 1pc ! 1-534-827-14 s CORD, POWER (10A/125V).
.
7-1 PFM-42B1, PFM-42B1E 7-1 B (1/6), QA(1/2) B (1/6), QA(1/2) Section 7 Block Diagrams QA (1/2) IC223 Q4037 Y/C IN CN9503 CN9501(1/2) A3 VIDEO A4 Y A5 C CN6910(1/2) B (1/6) (Y/C CONTROL) BUFF Q1002 BU.
7-2 PFM-42B1, PFM-42B1E 7-2 B (2/6), QA (2/2), B1 B (2/6), QA (2/2), B1 PR/R A2 Y/G A3 PB/B A4 CN6101(1/2) A7 A9 MATRIX SYS HS B1 (RGB SW) BUFF Q6101 1 4 CHROMA CONTROL IC6102 BUFF Q6103 1 2 7 6 5 3 5.
7-3 PFM-42B1, PFM-42B1E 7-3 B (3/6) B (3/6) AMP Q1026 LPF FL1004 AMP Q1027 BUFF Q1028 SYNC SEP 2 1 IC1006 IC1011 3D COMB 10 MACS CSI 76 AYI 88 LCAS 29 FSCI 50 FSCO 47 SDA 60 SCL 59 BUFF Q1025 65 74 75 ALFT DYCO0 DYCO9 D0 D9 IC1012 24 4 5 IC1013 Y/C DECODER 28 25 23 .
7-4 PFM-42B1, PFM-42B1E 7-4 B (4/6) B (4/6) B (4/6) RGB MATRIX/ DRC PROCESSOR/ LVDS SWITCH () BUFF Q1029 1/6 Y1 IC1032 CAPTION DECODER Q1037 IC1029 57 1/6 R-Y1 1/6 B-Y1 5 R 5V-4 R 10 Q1034 6 G G 11 Q1.
7-5 PFM-42B1, PFM-42B1E 7-5 B (5/6), S1, YA, YB B (5/6), S1, YA, YB B (5/6) (MAIN CPU) R1I 13 T1O 14 R2I 8 T2O 7 12 R1O 11 T1I 9 R2O 10 T2I 11 12 8 9 10 13 IC503 RS-232 I/F IC505 IC505 89 10 IC506 11 .
7-6 PFM-42B1, PFM-42B1E 7-6 B (6/6) B (6/6) IC212(1/2) B (6/6) (PDP I/F) MEMA1 MEMA18 31 . 29 33 . 35 . 38 . 40 . 42 . 44 . 32 . 30 34 . 36 . 39 . 41 . 43 . 45 . A0 A17 DQ0 DQ15 IC206 MEMORY 185 ROMWE 186 ROM OE WE 11 OE 28 213 215 216 . 223 . 222 208 214 .
7-7 PFM-42B1, PFM-42B1E 7-7 T T T PANEL UNIT PLASMA DISPLAY STBY 15 CN9002 STBY 5V 14 STBY 5V 13 5VD 12 5VD 11 6.2V 8 6.2V 7 13.5V 4 13.5V 3 12V 2 12V 1 STBY 1 CN9008 STBY 5V 2 STBY 5V 3 5VD 4 5VD 5 6.
7-8 PFM-42B1, PFM-42B1E 7-8 APS-132 M, F APS-132 M, F CN7 2,3 LF101-103 LINE FILTER F101 LF7001-7002 LINE FILTER F7001 CN2 1 3 1 3 CN1 TO OPTION BOARD D100 D103 VOLTAGE DETECT Q300 VOLTAGE DETECT Q305.
8-1 PFM42B1, PFM-42B1E 8-1 2 3 4 5 1 A BCDE FGH Section 8 Diagrams [Measuring conditions, voltage and waveform] . . . . . A voltage value is the reference value between the measurement point and the e.
8-2 PFM42B1, PFM-42B1E 8-2 2 3 4 5 A BCD E F G H 1 Frame 8-1. Frame Schematic Diagram 1 2 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 .
8-3 PFM42B1, PFM-42B1E 8-3 2 3 4 5 1 A BCDE FGH QA (BKM-B10) (BKM-B10) QA 8-2. Schematic Diagrams and Printed Wiring Boards QA -A SIDE- SUFFIX: -11 CN9501 CN9501 CN9502 CN9502 CN9503 CN9503 C9501 C950.
8-4 PFM42B1, PFM-42B1E 8-4 2 3 4 5 A BCD E F G H 1 BAT500 CN103 CN104 CN105 CN106 CN109 CN110 CN112 CN115 CN118 CN6102 CN6103 CN6104 CN6105 CN6106 CN6910 CN8001 CN801 C1 C1002 C1004 C1006 C1008 C1009 .
8-5 PFM42B1, PFM-42B1E 8-5 2 3 4 5 1 A BCDE FGH C10 C100 C1000 C1001 C1003 C1005 C1007 C101 C1011 C1012 C1014 C1017 C1019 C102 C1020 C1023 C1030 C1033 C1036 C1037 C1039 C1040 C1041 C1042 C1045 C1047 C.
8-6 PFM42B1, PFM-42B1E 8-6 2 3 4 5 A BCD E F G H 1 B B B BOARD * : B SIDE D1 * A-8 D100 A-3 D101 * A-2 D102 A-3 D103 * A-3 D201 F-8 D404 * E-5 D500 F-9 D501 * E-9 D502 * F-9 D503 * F-9 D504 F-9 D505 F.
8-7 PFM42B1, PFM-42B1E 8-7 2 3 4 5 1 A BCDE FGH B (1/13) B (1/13) 1 2 3 4 5 6 7 8 10 9 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 I O G A1 B1 A2 B2 A3 B3 A4 B4 A5 B5 A6 .
8-8 PFM42B1, PFM-42B1E 8-8 2 3 4 5 A BCD E F G H 1 B (2/13) B (2/13) 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 1 2 3.
8-9 PFM42B1, PFM-42B1E 8-9 2 3 4 5 1 A BCDE FGH B (3/13) B (3/13) 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59.
8-10 PFM42B1, PFM-42B1E 8-10 2 3 4 5 A BCD E F G H 1 B (4/13) B (4/13) 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 2.
8-11 PFM42B1, PFM-42B1E 8-11 2 3 4 5 1 A BCDE FGH B (5/13) B (5/13) 13 12 11 10 9 8 7 6 5 4 3 2 1 3 2 1 3 2 1 5 4 3 2 1 10 9 8 7 6 5 4 3 2 1 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106.
8-12 PFM42B1, PFM-42B1E 8-12 2 3 4 5 A BCD E F G H 1 B (6/13) B (6/13) 3 2 1 8 7 6 5 4 3 2 1 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 ADJ O I ADJ O I GND VCC OUT GND VCC OUT GND VCC OUT S 12 11 10 9 8 7 6 .
8-13 PFM42B1, PFM-42B1E 8-13 2 3 4 5 1 A BCDE FGH B (7/13) B (7/13) 5 4 3 2 1 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 5 4 3 2 1 E.
8-14 PFM42B1, PFM-42B1E 8-14 2 3 4 5 A BCD E F G H 1 B (8/13) B (8/13) 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5.
8-15 PFM42B1, PFM-42B1E 8-15 2 3 4 5 1 A BCDE FGH B (9/13) B (9/13) 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 .
8-16 PFM42B1, PFM-42B1E 8-16 2 3 4 5 A BCD E F G H 1 B (10/13) B (10/13) 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 6 4 3 2 1 12 9 5 4 2 10 7 6 3 1 6 4 3 2 1 Q1049 Q104.
8-17 PFM42B1, PFM-42B1E 8-17 2 3 4 5 1 A BCDE FGH B (11/13) B (11/13) 5 4 3 2 1 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 .
8-18 PFM42B1, PFM-42B1E 8-18 2 3 4 5 A BCD E F G H 1 B (12/13) B (12/13) 6 4 3 2 1 6 4 3 2 1 12 9 5 4 2 10 7 6 3 1 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 16 15 1.
8-19 PFM42B1, PFM-42B1E 8-19 2 3 4 5 1 A BCDE FGH B (13/13) B (13/13) 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 5 4 3 2 1 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 28 27 26 25 24 23 .
8-20 PFM42B1, PFM-42B1E 8-20 2 3 4 5 A BCD E F G H 1 24LC21T/SN (IC103, IC4013) 5 7 6 8 4 1 2 3 I/O CONTROL LOGIC MEMORY CONTROL LOGIC XDEC EEPROM ARRAY PAGE LATCHES H/V GENERATOR SENSE AMP R/W CONTRO.
8-21 PFM42B1, PFM-42B1E 8-21 2 3 4 5 1 A BCDE FGH CXD2309 (IC4006) DECODER DECODER LATCHES 4LSB S CURRENT CELLS DECODER DECODER LATCHES 6LSB S CURRENT CELLS CLOCK GENERATOR 4LSB S CURRENT CELLS 6LSB S.
8-22 PFM42B1, PFM-42B1E 8-22 2 3 4 5 A BCD E F G H 1 ST49C101ACF8-05 (IC218) Oscillator Circuit Programmable Counter B Voltage Controlled Oscillator 3 4 1 5 Loop Filter Charge Pump Phase Detector Prog.
8-23 PFM42B1, PFM-42B1E 8-23 2 3 4 5 1 A BCDE FGH TLC5733A (IC1042) 59 60 1 61 V (A) 63 CLK A 62 64 2 V DD DGND 14 5 26 25 8 8 8 8 8 8 8 8 8 8 8 8 56 58 6 I 13 16 15 17 I 24 35 44 MODE0 CLK A CLK B CL.
8-24 PFM42B1, PFM-42B1E 8-24 2 3 4 5 A BCD E F G H 1 BA10358 (IC6104) + – 6 7 5 8 B + – 2 1 3 4 A A OUT A IN – A IN+ VEE VCC B OUT B IN – B IN+ TC4W66F (IC6106, IC6107) 1 2 3 4 8 7 6 5 IN/OUT .
8-25 PFM42B1, PFM-42B1E 8-25 2 3 4 5 1 A BCDE FGH B1 B1 B15 A15 B14 A14 B13 A13 B12 A12 B11 A11 B10 A10 B9 A9 B8 A8 B7 A7 B6 A6 B5 A5 B4 A4 B3 A3 B2 A2 B1 A1 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 8 7.
8-26 PFM42B1, PFM-42B1E 8-26 2 3 4 5 A BCD E F G H 1 YA, YB YA, YB YA -A SIDE- SUFFIX: -11 YB -B SIDE- SUFFIX: -11 YB -A SIDE- SUFFIX: -11 YA -B SIDE- SUFFIX: -11 CN8501 D8503 D8504 IC8501 S8501 C8501.
8-27 PFM42B1, PFM-42B1E 8-27 2 3 4 5 1 A BCDE FGH S, F S, F CN1501 C1501 C1502 C1503 C1504 IC1501 IC1502 R1501 R1502 R1503 R1504 F -B SIDE- SUFFIX: -11 S -B SIDE- SUFFIX: -11 CN7001 C7001 C7002 EY1 EY.
8-28 PFM42B1, PFM-42B1E 8-28 2 3 4 5 A BCD E F G H 1 T T CLP1 CLP2 CLP3 CLP4 CN9001 CN9002 CN9003 CN9004 CN9005 CN9006 CN9007 CN9008 CN9009 CN9011 CN9012 CN9013 CN9014 CN9015 T -A SIDE- SUFFIX: -11.
8-29 PFM42B1, PFM-42B1E 8-29 2 3 4 5 1 A BCDE FGH T T B -B SIDE- SUFFIX: -11.
8-30 PFM42B1, PFM-42B1E 8-30 2 3 4 5 A BCD E F G H 1 T T 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 8 7 6 5 4 3 2 1 B10 A10 B9 A9 B8 A8 B7 A7 B6 A6 B5 A5 B4 A4 B3 A3 B2 A2 B1 A1 B10 A10 B9 A9 B8 A8 B7 A7 B6 A6 B.
8-31 PFM42B1, PFM-42B1E 8-31 2 3 4 5 1 A BCDE FGH APS-132 M (1/4) APS-132 M (1/4) C518 0.068 1250V C502 0.1 C517 0.068 1250V C501 22 450V R501 47 1/4W R162 22k 1000p C151 150 R154 10k R159 4700p C164 R163 22k R155 4.7k C158 470p C166 0.1 D151 1SS355 1 13.
8-32 PFM42B1, PFM-42B1E 8-32 2 3 4 5 A BCD E F G H 1 APS-132 M (2/4) APS-132 M (2/4) C250 0.1 R251 4.7k R250 10k R259 470k R260 10k C258 0.033 R261 1k R263 3k F/D R262 18k F/D C252 1500 10V C253 1500 25V C254 1500 25V C256 1000 35V C260 470 10V R264 4.
8-33 PFM42B1, PFM-42B1E 8-33 2 3 4 5 1 A BCDE FGH APS-132 M (3/4) APS-132 M (3/4) 1 2 3 4 5 6 7 89 10 11 12 13 14 15 16 OUT1 V RT OUT2 RT Vref GND E 1 2 ST ON/OFF Cs Ccs V Rcs IN OVP CT Vc C718 0.1 C714 330p CH R713 3.3k R717 39k R711 10k D704 1SS355 R718 10k RV700 f.
8-34 PFM42B1, PFM-42B1E 8-34 2 3 4 5 A BCD E F G H 1 APS-132 M (4/4) APS-132 M (4/4) C600 0.1 R601 4.7k R614 3.6k F/D R602 1k C601 0.01 D601 1SS355 C602 0.1 R603 22k D605 HZU6.2B R609 1k R610 1k R604 4.7k D603 1SS355 R607 10k R606 10k V- V+ 1234 5 6 7 8 RV600 VA ADJ 470 R615 2.
8-35 PFM42B1, PFM-42B1E 8-35 2 3 4 5 1 A BCDE FGH APS-132 M APS-132 M APS-132 M -A SIDE- SUFFIX: -12 A B C D E F G H I J K 1 2 3 4 5 6 7 8 IC203 B-3 IC250 D-3 IC251 C-2 IC252 E-3 IC253 C-2 IC254 E-2 I.
8-36 PFM42B1, PFM-42B1E 8-36 2 3 4 5 A BCD E F G H 1 APS-132 M APS-132 M APS-132 M -B SIDE- SUFFIX: -12 A B C D E F G H I J K 1 2 3 4 5 6 7 8.
SAFETY CHECK-OUT After correcting the original service problem, perform the following safety checks before releasing the set to the customer : Check the metal trim, “metallized” knobs, screws , and all other exposed metal parts for A C leakage. Check leakage as described below .
Sony Corporation Communication System Solutions Network Company 9-929-692-01 English 00LS16-1 Printed in Japan ©2000.12.
Ein wichtiger Punkt beim Kauf des Geräts Sony BKM-B10 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony BKM-B10 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony BKM-B10 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony BKM-B10 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony BKM-B10 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony BKM-B10 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony BKM-B10 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony BKM-B10. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony BKM-B10 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
