Benutzeranleitung / Produktwartung 32LX1E des Produzenten Sony
Zur Seite of 43
FWD-42LX1/32LX1/42LX1E/32LX1E 2-149-745- 03 (1) 2004 Sony Corporation Operating Instructions Mode d’emploi Bedienungsanleitung Manual de instrucciones Istruzioni per l’uso GB FR DE ES IT 取.
2 (GB) W ARNING Owner’ s Recor d The model and serial numbers are located on the rear. Record the model and serial numbers in the spaces provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No.
3 (GB) English GB Ta b le of Contents Precautions ............................................................... 5 (GB) Location and Function of Parts and Controls ....... 7 (GB) Front / Rear / Side ...................................................
4 (GB) Setting up the Multi Display .................................. 34 (GB) Adjusting the Sound Quality ................................. 35 (GB) Adjusting the Treble, Bass, and Balance, etc. ....... 35 (GB) Restoring the Adjust Sound Menu Items to Their Original Settings .
5 (GB) Precautions Precautions On safety •A nameplate indicating operating voltage, power consumption, etc. is located on the rear of the unit. • Should any solid object or liquid fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further.
6 (GB) Precautions a) Note: Use an appropriate rating plug which complies with local regulations. Warning on power connection Use the proper power cord for your local power supply.
7 (GB) Location and Function of Parts and Controls Location and Function of P arts and Controls Fr ont / Rear / Side Front Side Rear 1 Indicator section For details on the Indicator section, see “Indicator Section” on page 8 (GB).
8 (GB) Location and Function of Parts and Controls 1 2 3 4 5 6 Indicator Section 1 Remote control detector Receives the signals from the Remote Commander. 2 POWER/STANDBY indicator Lights up in green when the display unit is powered on. Lights up in red in the standby mode.
9 (GB) Location and Function of Parts and Controls VIDEO S VIDEO IN OUT IN OUT RL AUD IO IN VIDEO INPUT ADAPT OR IN OUT DV I-HDCP AUD IO AUD IO L R RGB/COMPONENT CONTROL S REMOTE AUDIO OUT AUD IO VD H.
10 (GB) Location and Function of Parts and Controls 7 COMPONENT/RGB IN (A BKM-FW11 is preinstalled only in the FWD-42LX1.) Y/G P B /C B /B P R /C R /R IN (BNC) : Connects to the analog RGB signal or component (YUV) signal output of a piece of video equipment or a computer.
11 (GB) Location and Function of Parts and Controls Remote Commander RM-980 1 POWER ON switch Press to power on the display. 2 STANDBY button Press to change the display to the standby mode. 3 MUTING button Press to mute the sound. Press again to restore sound.
12 (GB) Location and Function of Parts and Controls qk CHROMA button Adjusts the chroma when the picture mode is set to any of “User1” to “User3.” Press this button and adjust the chroma with the M / m or < / , buttons 9 . ql CONTRAST +/– button Adjusts the contrast when Picture Mode is set to any of “User1” to “User3.
13 (GB) Caution Provide an ample amount of space around the display •W hen you use the display, make sure there is more space around the display than that shown in the figure below. This will allow for proper ventilation. • The ambient temperature must be 0 °C to +35 °C (32 °F to 95 °F).
14 (GB) Connections Before you start • First make sure that the power to each piece of equipment is turned off. •U se connecting cables suitable for the equipment to be connected. • The cable connectors should be fully inserted into the jacks. A loose connection may cause hum and other noise.
15 (GB) Connections 1 2 3 Using the cable holders You can neatly bundle the cables with the cable holders ( × 6) provided. Select six out of eight holes for the cable holders. Attach the cable holders as shown in the illustration below. Rear Inset the cable holder into the hole on the unit and rotate it about 90 degrees.
16 (GB) Using On-screen Menus Using On-screen Menus Operating Thr ough Menus Menu operating buttons Use the buttons on the display unit or the Remote Commander for menu operations. MENU ENTER Operation of the unit is explained in these operating instructions for the case of operation using the Remote Commander.
17 (GB) Using On-screen Menus Adjust Sound You can make fine adjustment of the sound. Set Picture Mode to any of “User1” to “User3” first. Note You cannot adjust the following items when Picture Mode is set to “Vivid” or “Standard.” For details, see “Adjusting the Sound Quality” on page 35 (GB).
18 (GB) Using On-screen Menus CUST OM SETUP menu You can reduce power consumption or set various kinds of modes. CUSTOM SETUP Power Saving: Speaker Out: Closed Caption: Display: Color Matrix: HD Mode:.
19 (GB) Using On-screen Menus Illumination Switches the brightness of the “SONY” logo on the front of the display unit. Remote This menu is used for remote control settings. Index Number Sets the index number of the display. Note When you set the index number, use the buttons on the display unit.
20 (GB) Using On-screen Menus Security Lock Sets the security lock on the display unit. Off: Disables the security lock. On: With this item set to On, requires a password to set the security lock. For details, see “Setting the Security Lock” on page 38 (GB).
21 (GB) Watching the Picture W atching the Picture Before you start • Power on the display. • Power on the connected equipment and play a video source. • To display the input signal information and Picture Mode on the screen when turning on the power or switching the input signal, set “Display” in the Custom Setup menu to On.
22 (GB) Watching the Picture Input Signal, Picture Mode and Displa y Status Information Input signal and Picture Mode information appear on the screen for about five seconds when the power is turned on or when the input signal is switched. To disable this function, follow the steps below.
23 (GB) Watching the Picture Preset input signals Signal name Color system or horizontal/ vertical frequency Computer signals 1V G A a) -1 (VGA 350) 31.5 kHz 70 Hz 2 640 × 480@60 Hz (VESA b) STD) 31.5 kHz 60 Hz 3M a c c) 13 " 35.0 kHz 67 Hz 4V GA (VGA TEXT) 31.
24 (GB) Selecting Image Quality You can set an image quality suitable for the type of picture or the brightness of the location where the unit is installed.
25 (GB) Cinema Drive Automatically detects a picture shot on a 24 frame motion-picture film and plays it back maximizing the characteristics of a motion-picture film. 1 Select “Cinema Drive” with M / m and press ENTER. The following menu appears on the screen.
26 (GB) Color Temp. You can set color temperature. Either select one from “Cool,” “Neutral,” or “Warm,” or set values for each gain separately. 1 Select “Color Temp.” with M / m and press ENTER. 2 Select the color temperature with M / m and press ENTER.
27 (GB) Restoring the Adjust Picture Menu Items to Their Original Settings 1 In the Adjust Picture menu, press M / m to move the cursor (yellow) to “Reset” and press ENTER. The following menu appears on the screen. PICTURE/SOUND CONTROL Adjust Picture Color Correct.
28 (GB) Picture Enlar g ement You can enlarge pictures to suite your taste. For Wide Mode, the following choices are available. Original Picture Enlarged Picture (Picture Type) Wide Zoom Ordinary pictures with a 4:3 aspect ratio (screen aspect ratio: 4:3).
29 (GB) 3 Press M / m to move the cursor (yellow) to “Wide Setup” and press ENTER. The following menu appears on the screen. SCREEN CONTROL Wide Setup Auto Wide: 4:3 Mode: On Wide Zoom Set ENTER Exit MENU Select 4 Press M / m to move the cursor (yellow) to “Auto Wide” and press ENTER.
30 (GB) (2) Select “OK” with M / m and press ENTER. All the items of “Adjust screen” menu are adjusted automatically. Note Due to patterns in the image, there may be times when noise continues to occur even after you have used Auto Adjust. In such cases, adjust the dot phase manually.
31 (GB) Resizing and Positioning the Picture H Size Select “H Size” with M / m and press ENTER. Adjust the horizontal size of the picture with M / m / < / , within the range of MIN (0) to MAX (100), then press ENTER. M / , : Enlarges the image horizontally.
32 (GB) Vie wing two pictures at the same time You can show two pictures from different signal sources, such as a computer and a video, side by side. 1 Press MENU.
33 (GB) Zooming in on a picture When P&P is selected 1 Select “Picture Size” with M / m and press ENTER. 2 Keep pressing < / , to change the size of the picture, then press ENTER. When PinP is selected 1 Select “Picture Size” with M / m and press ENTER.
34 (GB) Setting up the Multi Display Setting up the Multi Displa y You can make settings for connecting multiple display units to form a video wall. 1 Press MENU.
35 (GB) Adjusting the Sound Quality When a speaker SS-SP42FW/32FW (not supplied) installed, you can adjust sound treble level, bass level, or balance of the speaker (left and right) volume. The surround mode can also be set. Adjusting the T reble, Bass, and Balance, etc.
36 (GB) Selecting the On-screen Language You can select the on-screen language from Japanese, English, German, French, Spanish or Italian. 1 Press MENU.
37 (GB) Controlling Power On/Off Automatically (Timer Function) Contr olling P o wer On/Off A utomaticall y (Timer Function) You can set the time to display the current time and set the time when the power automatically turns on/off (On/Off Timer function).
38 (GB) Controlling Power On/Off Automatically (Timer Function) / Setting the Security Lock On/Off Timer Function 1 In the TIMER/CLOCK menu, press M / m to move the cursor (yellow) to “On/Off Timer” and press ENTER. The following menu appears on the screen.
39 (GB) Setting the Security Lock / Self-diagnosis Function 3 Enter the password again for re-confirmation. Re-enter new password key. Be sure to remember this password. Use : Cancel : Other key MENU ENTER The setting is finished when the following message appears.
40 (GB) Operating a Specific Displa y With the Remote Commander Using the supplied Remote Commander, you can operate a specific display without affecting other displays installed at the same time. 1 Press ID MODE ON on the Remote Commander. Monitor index numbers appear in black characters on the lower left menu on the screen.
41 (GB) Specifications Specifications Video processing Preset signal See page 23 (GB). Sampling rate 13.5 MHz to 140 MHz Panel system a-Si TFT Active Matrix LCD Panel Display resolution 1366 dots (horizontal) × 768 lines (vertical) FWD-42LX1/42LX1E: Pixel pitch 0.
42 (GB) Specifications Pin No. Signal 1 Red video or R-Y or P R 2 Green video or Y or Sync On Green 3 Blue video or B-Y or P B 4 Ground 5 Ground 6 Red ground 7 Green ground 8 Blue ground 9 Not used 10.
Sony Corporation Printed in Japan この説明書は100％古紙再生紙を使用しています。 Printed on 100% recycled paper ..
Ein wichtiger Punkt beim Kauf des Geräts Sony 32LX1E (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony 32LX1E noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony 32LX1E - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony 32LX1E reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony 32LX1E erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony 32LX1E besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony 32LX1E verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony 32LX1E. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony 32LX1E gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
