Benutzeranleitung / Produktwartung WLT180H421BV2 des Produzenten Snapper
Zur Seite of 42
Safety Instructions & Operator's Manual for LAWN TRACTOR HYDROSTA TIC DRIVE ELECTRIC CLUTCH SERIES I MODELS L T180H421BV2 WL T180H4 21BV2 L T200H481BV2 WL T200H481BV2 MODEL NUMBER EXPLANATION.
IMPORTANT SAFETY INSTRUCTIONS WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons.
IMPORTANT SAFETY INSTRUCTIONS PREPARATION (Continued From Previous Page) 7. Keep people and pets out of mowing area. Immediately STOP blades, STOP engine, and STOP machine if anyone enters the area. 8. Check shields, deflectors, switches, blade controls and other safety devices frequently for proper operation and location.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS .................. 2 - 3 TABLE OF CONTENTS .................................................. 4 SECTION 1 - FAMILIARIZATION ................................... 6 Components ..............................
Section 1 - FAMILIARIZATION CLUTCH/BRAKE PEDAL DOWN BATTERY (UNDER SEAT) SEAT ADJUSTMENT KNOB (UNDER SEAT) SEAT CHOKE FAST SLOW STEERING CONTROL DASHBOARD CONTROLS - LIGHT SWITCH IGNITION KEY SPEED CONTROL LEVER FUELTANK (UNDER HOOD) OVERRIDE LEVER CUTTING HEIGHT ADJUSTMENT LEVER DISCHARGE DEFLECTOR ENGINE MOWING DECK (42"SHOWN) FIGURE 1.
Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECKLIST Make the following checks and perform service as required before each start-up. 2.1.1. Check tires and add air as needed to bring pressure to 12 P.S.I. in front tires and 12 P.S.I. in rear tires.
Section 2 - OPERATING INSTRUCTIONS 2,3 STARTING & OPERATION 2,3.1. STARTING ENGINE 1. Take a comfortable position in seat of machine, look around to make sure that the area you are going to mow is clear of people, children and pets.
Section 2 - OPERATING INSTRUCTIONS 2,3 STARTING & OPERATION (Continued) 2,3.2, STARTING WHEEL DRIVE 1. Shift speed control lever to neutral. 2, Start engine. Refer to Section "STARTING ENGINE". 3. Release clutch/brake pedal. 4. Slowly shift speed control lever forward for forward motion or to the rear for reverse motion.
Section 2 - OPERATING INSTRUCTIONS 2.4 STOPPING 2,4,3, STOPPING MOWER BLADES 1. Stop mower blade by pushing blades switch IN to disengage blades. See Figure 2.11. ON PUSH BLADE SWITCH IN TO THE "OFF" POSITION 2.4.5. RELEASING PARK BRAKE 1. Fully depress clutch/brake pedal.
Section 2 - OPERATING INSTRUCTIONS 2,6. ROLLING TRACTOR WITH ENGINE OFF 2,6.1. Rolling Hydro Models 1. With engine "OFF", move to rear of tractor. 2, Pull the roll release control all the way out to disengage the hydro transmission. See Figure 2.
Section 2 - OPERATING INSTRUCTIONS 2.7. REVERSE LOCKOUT MECHANISM Data indicates that tragic back-over accidents occur each year. These accidents usually involve unsupervised children.
Section 3 - MAINTENANCE 3.1 INTRODUCTION To retain the quality of the Tractor, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular Tractor, always mention the model and senal number.
Section 3 - MAINTENANCE WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT.
Section 3 - MAINTENANCE 3.3.2. MOWER COMPONENTS 1. Check deck drive belt for proper tension. Refer to Section, "CHECK DECK DRIVE BELT". 2. Check blades for sharpness, wear, damage and torque. Refer to Section on "MOWER BLADE SERVICE".
Section 3 - MAINTENANCE 3.3.4. TRACTOR LUBRICATION 6. Steering Drag Link Lubricate both ends of steering drag link with a small amount of 30 wt. motor oil from an oil can. See Figure 3.8. DRAG LINK LUBRICATION OINT FIGURE 3.8 7. Steering Tie Rod Lubricate both ends of steering tie rod with a small amount of 30 wt.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR 4.2.5. MOWER DECK ADJUSTMENT (LEVELNESS) SIDE-To-SIDE (48" Decks) Before making deck leveling adjustments, check the tire pressure. Check tires and add or release air as needed to bring pressure to 12 PSI in front and 12 PSi in rear tires.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR _IL WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug.
Section 4 - ADJUSTMENT & REPAIR IL WARNING 41 DO NOT OVERFILL! Never attempt to service or I charge the battery while it is installed on the machine. DO NOT use "BOOST" chargers on the battery. 4.5.5. BATTERY TESTING There are two types of battery tests: Unloaded and Loaded.
Section 4 - ADJUSTMENT & REPAIR AVAILABLE ACCESSORIES The SNAPPER LAWN TRACTOR can be equipped with a variety of accessories that increase its versatility. The accessories available for each model are listed in the chart below. Contact an authorized SNAPPER dealer for ordering any of the accessories desired.
SECTION 5 - ELECTRICAL SYSTEM ELECTRICAL - 18 & 20 HP -- B & S TWIN ENGINE Note: Switches shown with, Pedal locked down Blade disengaged Seat vacant .
TROUBLESHOOTING GUIDE PROBLEM Starter Will Not Crank Engine Engine Will Not Start Engine Stalls After Running Engine Loses Power Engine Backfires When Turned To "STOP" Excessive Vibration PROBABLE CAUSE 1. Battery dead. 2. Blown fuse. 3. Electrical connections loose or corroded.
TROUBLESHOOTING GUIDE (Continued From Previous Page) PROBLEM Tractor Will Not Move Or Loss Of Ground Speed Blade(s) Not Turning Cutting Grass improperly Poor Grass Discharge Battery Will Not Charge Transmission PROBABLE CAUSE 1. Speed control handle in the neutral "N" position.
SUBJECT Engine Engine Engine Air Pre-Cleaner Air Cleaner Spark Plug Fuel Filter Engine Cooling System Battery Battery Tires Drive Belts Mower Blades Mower Deck Mower Deck Lubrication Points Hydrostatic Trans.
3 YEAR LIMITED WARRANTY For three (3) years from purchase date for the original purchaser's residential, non-commercial use, SNAPPER, through any authorized SNAPPER dealer will replace, free of c.
PRIMARY MAINTENANCE an illustration of how dirt can " & how maintenance can protect it! best avail- able engines and components In their products In order to t, provide long, satisfactory service. However, proper care Is essential in _'" prolonging engine life.
PRIMARY MAINTENANCE gulpabout _r used. Because of Its working environ- , ._ mant, the air avellable ;,:'_ to your Snapper engine Is " _ heavily saturated with air- borne dirt particles. that dirt will quickly ruin an engine, manufacturers equip their engines with extremely efficient air cleaners to the harmful dirt.
PRIMARY MAINTENANCE Generally, wash foam-type filters In a dlshwashlng detergent and water solution. Rinse and wring dry, then saturate with oll and squeeze out excess. Failure to re-oil this type filter will ruin the engine. Clean paper elements by tapping lightly.
PRIMARY MAINTENANCE On 4.-cyle engines with an oll level plug, don't be fooled Into thinking the engine has sufficient lubricating oll If you can see "some" oll In the opening - the level should always be top of the fill hole.
SNAPPER PRODUCT REGISTRATION FORM IMPORTANT: KEEP THIS INFORMATION FOR YOUR PERSONAL RECORDS (Complete the following information on your Snapper purchase) Model Number Serial Number Date of Purchase Retailer Retailer's Phone Number It is very important that you register your purchase with Snapper to ensure warranty coverage.
Safety Instructions & Operator's Manual for LAWN TRACTOR HYDROSTA TIC DRIVE ELECTRIC CLUTCH SERIES I IMPORTANT Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissions information and critical safety warnings.
Ein wichtiger Punkt beim Kauf des Geräts Snapper WLT180H421BV2 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Snapper WLT180H421BV2 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Snapper WLT180H421BV2 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Snapper WLT180H421BV2 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Snapper WLT180H421BV2 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Snapper WLT180H421BV2 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Snapper WLT180H421BV2 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Snapper WLT180H421BV2. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Snapper WLT180H421BV2 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
