Benutzeranleitung / Produktwartung SGT27540D des Produzenten Snapper
Zur Seite of 48
OPERA T OR’S MANU AL 27HP Hydro T ractors & Mo wer Decks Mfg. No. Description 2690634 ST6T2754D, 27HP, 4WD, 3P (CE) 2690667 ST6T2754D, 27HP, 4WD, 3P & 54” Mower (CE) 54” Mower Dec ks Mfg. No. Description 1695204 54" Mower Deck (CE) GT600 Series 1734110 Revision 02 Rev.
.
1 Check Mower Deck Gear Box Oil .........................30 Safety Interlock System Check .............................30 Blade Brake Check ...............................................30 Check Tire Pressures ........................................
2 Safety Rules & Information TP 600-2459-08-UV-SMA Operating Safety Congratulations on purchasing a superior-quality piece of lawn and garden equipment. Our products are designed and manufactured to meet or exceed all industry standards for safety.
3 Safety Rules and Information Slope Operation You could be seriously injured or even killed if you use this unit on too steep an incline. Using the unit on a slope that is too steep or where you don’t have adequate traction can cause you to lose control or roll over.
4 Safety Rules & Information GENERAL OPERA TION 1. Read, understand, and follow all instructions in the manual and on the unit before starting. 2. Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at all times.
5 Safety Rules and Information CHILDREN Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the unit and the mowing activity. Never assume that children will remain where you last saw them.
6 SER VICE AND MAINTENANCE Safe Handling of Gasoline 1. Extinguish all cigarettes, cigars, pipes, and other sources of ignition. 2. Use only approved gasoline containers. 3. Never remove the gas cap or add fuel with the engine running. Allow the engine to cool before refueling.
7 Identification Numbers Tractor ID Tag Mower ID Tag ENGINE REFERENCE DATA Model Description Name/Number Unit MFG Number PRODUCT REFERENCE DATA Unit SERIAL Number Dealer Name Date Purchased Engine Mak.
8 Safety Decals Safety Decals This unit has been designed and manufactured to pro- vide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing.
9 Safety Icons / Safety Interlock T est Warning: Read Operator’s Manual. Read and understand the Operator’s Manual before using this machine. Danger: Thrown Objects. This machine is capable of throwing objects and debris. Keep bystanders away. Warning: Remove Key Before Servicing.
10 Features & Controls Choke (Select Models) Close the choke for cold starting. Open the choke once the engine starts. A warm engine may not require chok- ing. Pull the choke control out to close the choke. Throttle Contr ol The throttle controls engine speed.
11 Attachment Lift Contr ol Lever When using the mower deck, lift the deck off the ground while transporting to and from the job site. DO NOT cut with the mower in the raised, transport position. The attachment lift control lever raises and lowers attachments that utilize the tractor’s hydraulic lift cylinder.
12 Features & Controls Figure 2. Engaging the Parking Brake A. Ground Speed Pedals B. Brake Pedal C. Parking Brake Knob P arking Brake Function Applying the Parking Brake - See Figure 2.
13 Features & Controls K B D F E I J C G Dashboar d Display Functions The dashboard display shows a variety of engine opera- tion and control status information, as explained in the descriptions below. A. Irregular V oltage Indicates that the voltage being produced by the charg- ing system and battery is higher or lower than normal levels.
14 Operating the T ractor Star ting The Engine 1. While sitting in the operator’s seat, fully depress the brake pedal or set the parking brake. 2. Set the cruise control lever in neutral and make sure that your feet are not depressing the ground speed control pedals.
15 Operating the T ractor 1. Return the ground speed control(s) to neutral and engage the parking brake. 2. Disengage the PTO and wait for all moving parts to stop. 3. Place the throttle control in the position specified in the engine owner’s manual provided in the operator's packet shipped with your tractor.
16 Operating the T ractor Hydraulic System Functions General All of the inboard and auxiliary hydraulics are controlled by the attachment lift control lever. The attachment lift control lever raises and lowers attachments that utilize the tractor’s hydraulic lift cylinder.
17 Operating the T ractor A. B. A. B. Figure 8. Auxiliary Hydraulics A. Lift B. Lower Figure 7. Auxiliary Hydraulics A. Angle Left B. Angle Right Using A uxiliary Hydraulics The attachment lift control is also used to control attach- ments that use the tractor’s auxiliary hydraulic couplers located on the right and left front frame rails.
18 Operating the T ractor 0 200 400 1' 0' 2' 600 3' 4' Max. Attachment W eight (Lbs.) Max. Attachment W eight Distance from End of Hitch Arm to Attachment Center of Gra vity (.
19 Operating the T ractor Figure 12. Install Sway Arms A. Sway Arms B. Hair Pin Clips C. Clevis Pins D. Upper Link Assembly E. Safety Clips F. Clevis Pins Figure 13. Install Chains A. Right Sway Arm B. Clevis Pin & Safety Clip C. Capscrew, 3/8-16 x 1-1/2 & Locknut D.
20 Operating the T ractor 540 Rear PT O Operation (Select Models) Checks Bef ore Starting Refer to the Maintenance & Adjustments sections of this manual and perform any needed service. Connecting a Drive Shaft 1. Disengage the PTO, set the parking brake, stop the engine, and wait for all moving parts to stop.
21 Operating the T ractor 540 Attachment Recommendations GENERAL This rear PTO was designed and tested with the 540 RPM rear tiller sold by Simplicity Manufacturing. There are a wide variety of other 540 attachments available from numerous manufacturers.
22 Operating the T ractor Mower Dec k Remo v al & Installation NOTE: Perform mower removal and installation on a hard, level surface such as a concrete floor. Removing the Mo wer Dec k 1. Start the engine 2. Set the mower cutting height to its lowest setting.
23 Operating the T ractor Installing the Mower Dec k 1. Slide the mower under the tractor. 2. Hook up the electrical connection (Figure 20). 3. Start the engine. 4. Set the cutting height to maximum. 5. Fully lower the attachment lift. 6. Shut off the engine and wait for all moving parts to stop.
24 Operating the T ractor Attaching a T railer The maximum weight of a towed trailer should be less than 800 lbs (363 kg). Secure the trailer with an appro- priately sized clevis pin (A, Figure 23) and clip (B). Excessive towed loads can cause loss of traction and loss of control on slopes.
25 Regular Maintenance MAINTENANCE SCHEDULE The following schedule should be followed for normal care of your tractor and mower. * Refer to engine owner’s manual. Change original engine oil after initial break-in period. ** More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
26 Regular Maintenance Engine Maintenance - General Refer to the engine owner’s manual for all engine main- tenance procedures and recommendations. Clean Debris Out of Engine Compar tment Service Interval: Every 25 Hours, or As Necessary Stop the engine and allow the unit to cool.
27 Regular Maintenance Drain Fuel Separator Service Interval: Seasonally or as Needed The fuel filter assembly has a built in water separator that should be drained when the indicator light in the dashboard display turns on or once per season. Replace the fuel filter element every 800 hours of opera- tion or as required.
28 Regular Maintenance Figure 25. Transmission Fluid Check A. Dip Stick A Chec k T ransmission Oil Level Service Interval: Every 25 Hours Oil Type: Type F Automatic Transmission Fluid 1. Clean the area around the transmission dip stick (A, Figure 25).
29 Change T ransmission Oil & filter Service Interval: After first the 50 hours, then every 250 hours. Oil Type: Type F Automatic Transmission Fluid Oil Capacity: 2WD: 7.3-8.4 qt. (7-8L), 4WD: 7.7-8.8 qt. (7,3-8,3L), 4WD w/ 540PTO: 9-10 qt. (8,5-9,5L) Oil Filter Part No.
30 Regular Maintenance Safety Interloc k System Check Service Interval: Every Fall & Spring Check the function of the safety interlock system using the test procedure found on page 9 of this manual. If the tractor fails any of the tests, see your dealer.
31 Regular Maintenance Battery Maintenance Cleaning the Battery and Cables Service Interval: Every 100 Hours 1. Disconnect the cables from the battery, negative cable first (C, Figures 30). 2. Remove the battery clamp (B) and battery. On diesel models the battery clamp is secured with bolts to both frame rails (D, Figure 30).
32 Regular Maintenance Lubrication Service Interval: Every 25 Hours Lubricate the unit at the locations shown in Figures 31- 37 as well as the lubrication points listed. Generally, all moving metal parts should be oiled where contact is made with other parts.
33 Regular Maintenance Grease the Electric Lift Rod Grease Fitting Yearly Grease the Deck Belt Idler Pulley Arm Grease Fitting Yearly Figure 37. Mower Drive Shaft Figure 36.
34 Regular Maintenance Servicing The Mower Blades 1. Remove mower from the tractor. See Mower Installation & Removal. 2. Blades should be sharp and free of nicks and dents.
35 Regular Maintenance MAINTENANCE RECORDS.
36 T roubleshooting, Adjustment, & Service TR OUBLESHOO TING While normal care and regular maintenance will extend the life of your equipment, prolonged or constant use may eventually require that service be performed to allow it to continue operating properly.
37 T roubleshooting, Adjustment, & Service T r actor T roubleshooting Cont. Brake will not hold. 1. Brake is incorrectly adjusted. See Brake Adjustment. 2. Internal brake worn. See your dealer. Tractor steers hard or 1. Hydraulic system filter clogged.
38 T roubleshooting, Adjustment, & Service Brake Adjustment 1. Disengage the PTO, stop the engine, block the wheels, remove the ignition key, and engage the parking brake. 2. Remove the mower deck (see Mower Deck Removal). 3. Locate the brake spring (A, Figure 42).
39 T roubleshooting, Adjustment, & Service Headlight Replacement 1. Open the hood. 2. Remove the forward heat shield. 3. Remove the light bulb socket from the bezel by twist- ing it counterclockwise and pulling it out. 4. Use a rag or gloves to remove and replace the light bulb with an identical halogen bulb.
40 T roubleshooting, Adjustment, & Service W ARNING Before checking mower, shut off PTO and engine. Allow all moving parts to stop. Remove ignition key, then disconnect the spark plug wires and fasten them away from the spark plugs.
41 T roubleshooting, Adjustment, & Service W ARNING Before checking mower, shut off PTO and engine. Allow all moving parts to stop. Remove ignition key, then disconnect the spark plug wires and fasten them away from the spark plugs. Figure 46. Side-to-Side Adjustment A.
42 T roubleshooting, Adjustment, & Service To avoid damaging belts, DO NOT PRY BELTS OVER PULLEYS. Figure 48. Mower Belt Routing Center Pulley Belt Double V Outer Pulley Outer Pulley V Idler Drive Pulley BELT ROUTING VIEWED FROM TOP FRONT Mower Belt Replacement Mower Drive Belt Replacement 1.
43 Specifications ENGINE: 27 HP* Briggs & Stratton Make Briggs & Stratton Model DM 950 D - Model 582447 Horsepower 27 @ 3600 rpm Displacement 58.1 cu in (952cc) Electrical System 12 Volt, 40 amp. Alternator, Battery: 500 CCA Oil Capacity 3.2 qt.
44 Parts & Accessories Replacement P ar ts Replacement parts are available from your authorized dealer. Always use genuine Simplicity Service Parts. T echnical Manuals Additional copies of this manual are available, as well as fully illustrated parts lists.
.
Snapper, INC. 535 Macon Street McDonough, GA 30253 www.snapper.com Briggs & Stratton Yard Power Products Group Copyright © 2006 Briggs & Stratton Corporation Milwaukee, WI USA.
Ein wichtiger Punkt beim Kauf des Geräts Snapper SGT27540D (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Snapper SGT27540D noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Snapper SGT27540D - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Snapper SGT27540D reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Snapper SGT27540D erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Snapper SGT27540D besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Snapper SGT27540D verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Snapper SGT27540D. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Snapper SGT27540D gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
