Benutzeranleitung / Produktwartung M280921B, M250821BE, M281021BE, M300921B, M301021BE des Produzenten Snapper
Zur Seite of 36
Safety Instructions & Operator’s Manual for REAR ENGINE RIDING M OWER SERIES 21 MOD EL M250821BE M280921B M281021BE M300921B M301021BE MODEL NUMBER EXPLA NA TION M 28 10 21 B E MIDDLE M A RKET E.
2 IM PORTA NT SAFETY INSTRUCTIONS WARNING: This pow erful cut ting machine is cap able of amputat ing hands an d feet and can t hrow objects that can cause in jury and damage! Failure to comply wi th the follo wing SAFETY inst ructions coul d result in serious injury or death to the ope rator or other persons.
3 IM PORTA NT SAFETY INSTRUCTIONS PREPA RATION (Continued From Pre vious Page) 7. Keep people and pets out of mowing area. Immediately STOP blades, STOP engine, a nd STOP mach ine if anyone enters t he area. 8. Check shields, deflect ors, switches, b lade controls an d other saf ety devices frequen tly for proper oper ation and location.
4 TA BLE OF CONTENTS IMPO RTANT SA FET Y INST RUCTIONS .................... 2-3 TABLE OF CONTENT S ..................................................4 SECTION 1 - FA M ILIA RIZA T ION ...................................5 SECTION 2 - O PERA T ING INSTRUCT IONS .
5 Section 1 – FA MILIA RIZA TION+ FIGURE 1.1 1.1 INTRODUCT ION This manual has been prepared for the operator’s of the SNAPPER Rear Engine Rider. Its pur pose, aside fr om recom m ending standard operating pr ocedures and routine servic e requirem ents, is to prom ote SAFETY through the use of ac cepted operating practic es.
6 Section 2 - OPERA TING INSTRUCTIONS 2.1 PRE-ST A RT C HECK LIST Make the f ollowing check s and perfor m the s ervice required bef ore each start- up. 2.1.1. Check tires and add or release air as needed to bring pressur e to 12 psi in f ront and 12 psi in rear tires.
7 Section 2 - OPERA TING INSTRUCTIONS 2.3 STARTING & OPERA TION 2.3.1. ENGINE (ELECTRIC START) IMPO RTANT: W hen the ignition key is turned to “START ”, the engine will turn over, but will not start unless the Clutc h/Brake pedal is pressed all the way down, the Blade Lever is in the “Off ” position (See Figure 2.
8 Section 2 - OPERA TING INSTRUCTIONS 2.3 STARTING & OPERA TION 2.3.1. ENGINE (ELE CTRIC START) (Continued) 8. Should the battery be too weak to start the engine, Refer to Section “ENG INE (MANUAL ST ART) ” to manually start the electr ic start engines .
9 Section 2 - OPERA TING INSTRUCTIONS WA RNING Once blade is dise ngaged, it should come to a complete stop in 3 seconds or less. If the blade continues to rotate afte r 3 seconds, the blade brake must be adjust ed.
10 Section 2 - OPERA TING INSTRUCTIONS WA RNING DO NOT leave machine with the engine running. Stop engine. Stop blade . Shift to neutral. Engage parking brake. Remov e key. 2.4 STOPPING - ENGINE, W HEEL DRIVE, BLADE 2.4.1. ENGINE 1. Stop engine by turning key to the “OFF” position.
11 Section 2 - OPERA TING INSTRUCTIONS 2.4 STOPPING - ENGINE, WHEE L DRIVE, BLA DE 2.4.4. PA RK BRA KE 1. Engage park brak e by pushing clutch/br ake pedal “DOW N” and m oving the park brake latc h to the “ENGAGED” position. W hile holding the park brak e latch “ENGAG ED”, release clutc h/brake pedal to s et park brake.
12 Section 2 - OPERA TING INSTRUCTIONS 2.6 REVERSE LOCKO UT M ECHANISM Data indicates that tragic back -over accidents occur each year. These acc idents usually involve unsupervised c hildren.
13 Section 3 - MA INTENA NCE WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. STOP engine. ST OP blade. Engag e parking brake. Remov e key. Remove spark plug w ire from spark p lug and secure away from plug.
14 Section 3 - MA INTENA NCE WA RNING DO NOT attempt any adjustment s, maintenance, service or repairs with the engine running. STOP engine. S T OP blade. Engage parking b rake. Remove key. Remove spark plug wire f rom spark plug and secure aw ay from plug.
15 Section 3 - MA INTENA NCE 3.2.9. LUBRICA T ION – GREA SE FITT INGS The f ollowing components on the Rear Engine Rider are equipped with grease fittings and require periodic lubric ation. Apply G eneral Purpose greas e (NLGI No.2) with a grease gun.
16 Section 3 - MA INTENA NCE 3.3 SERV ICE - EVERY 25 OPER A TING HOURS 3.3.8. REAR A XLE BEA RING 1. T he left rear ax le bearing requires thr ee shots of general purpos e grease f rom gr ease gun. See Figure 3.7. NOTE: Som e m odels are equipped with a pre- lubricated sealed bear ing and require no additional lubrication.
17 Section 3 - MA INTENA NCE 3.4 SERV ICE - A NNUALLY 3.4.1. Perfor m all m aintenance as s pecified in “MAINTENANCE SCHEDULE” Section of this manual.
18 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug.
19 Section 4 - A DJUSTMENTS & REPA IR WA RNING Once blade is dis engaged it should come to a stop in 3 seconds or less. If the blade continues to rotate after 3 seconds the blade brake must be adjusted. DO NOT contin ue t o op erate t he machin e if t he b lade brake is not o perating prop erly.
20 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug.
21 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt any adjustments, main tenance, service or repairs with the engine r unning. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from sp ark plug and secure away from plug.
22 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. STOP engine. ST OP blade. Engag e parking brake. Remov e key. Remove spark plug w ire from spark p lug and secure away from plug.
23 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. STOP engine. ST OP blade. Engag e parking brake. Remov e key. Remove spark plug w ire from spark p lug and secure away from plug.
24 Section 4 - A DJUSTMENTS & REPA IR WA RNING DO NOT attempt an y adjustments, maintenance, service or repairs with the engine running. Stop engine. Sto p blade. Engage p arking brake. Remove key. Remove spark plug w ire from spark p lug and secure away from plug.
25 Section 4 - A DJUSTMENTS & REPA IR WA RNING The elect rolyte (acid) prod uces a highly explosiv e gas. Keep all sparks, flame and fire away from area w hen charging battery or when handling electroly te or battery . Electroly te (acid) is a highly c orrosive liquid.
26 Section 4 - A DJUSTMENTS & REPA IR 4.6.6. BA T TERY T ESTING Battery Condition Chart State of Charge Syr inge Hydr ome ter Digital Voltmeter Five Ball Hydr ometer 100% Charged w/ Sulfate Stop 1.280 12.80v Five Balls Floating 100% Charged 1.265 12.
27 TROUBLESHOOTING PROBL EM PROBABLE CA USE CORRECTIVE A CT ION Engine Will Not 1 . F u e l t a nk em p t y. 1. Fill fuel tank with fresh f uel to proper level. Start Using 2. Engine needs chok ing. 2. Move chok e control to “CHOKE” position. Recoil Starter 3.
28 TROUBLESHOOTING PROBLEM PROBA BLE CA USE CORRECTIVE A CT ION Rider Will Not M ove 1. Drive disc worn or damaged. 1. Replace drive disc . Loss Of T raction 2. Rubber drive disc is not track ing properly on drive disc . 2. Adjust r ubber drive disc. 3.
29 MAINTENA NCE SCHEDULE SUBJECT SERVICE TO BE PERFORMED REFERENCE PA G ES EA CH USE 5 HOURS 25 HOURS 50 HOURS 100 HOURS E A CH SEA SON Engine Check Oil Lev el Page 6 X Engine Initial Oil Change Page .
30 MAINTENA NCE/REPLA CEM ENT PA RTS MAINTENA NCE PA RTS Engine Speed Control ( Briggs Engin e) 2-4155 Clutch/Brake Cable 2-9913 Brake Cable 2-2344 Reverse Locko ut M echanism 7-3216 25” Cutter Blad.
31 3 YEA R LIMITED W A RRANTY For thr ee ( 3) years from purc hase date f or the original purc haser's residential, non- com m erc ial use, SNAPPER , through any authorized SNA PPER dealer will r.
32 PRIMARY MA INTENA NCE.
33 PRIMARY MA INTENA NCE.
34 PRIMARY MA INTENA NCE.
35 PRIMARY MA INTENA NCE.
36 Safety Instructions & Operator’s Manual for REAR ENGINE RIDING MOWER SERIES 21 IMPORTANT Snapper products are built using engines that meet or exceed all a pplicable emissions requirements on the date manufactured. The labels on thos e engines conta in very impor tant emissions infor mation and critica l safety warnings.
Ein wichtiger Punkt beim Kauf des Geräts Snapper M280921B, M250821BE, M281021BE, M300921B, M301021BE (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Snapper M280921B, M250821BE, M281021BE, M300921B, M301021BE noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Snapper M280921B, M250821BE, M281021BE, M300921B, M301021BE - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Snapper M280921B, M250821BE, M281021BE, M300921B, M301021BE reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Snapper M280921B, M250821BE, M281021BE, M300921B, M301021BE erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Snapper M280921B, M250821BE, M281021BE, M300921B, M301021BE besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Snapper M280921B, M250821BE, M281021BE, M300921B, M301021BE verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Snapper M280921B, M250821BE, M281021BE, M300921B, M301021BE. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Snapper M280921B, M250821BE, M281021BE, M300921B, M301021BE gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
