Benutzeranleitung / Produktwartung LT180H42IBV2, LT200H42IBV2, LT200H48IBV2 des Produzenten Snapper
Zur Seite of 48
Safety Instructions & Operator’s Manual for LAWN TRACTOR HYDROSTATIC DRIVE ELECTRIC CLUTCH SERIES I MODELS LT180H42IBV LT200H42IBV2 LT200H48IBV2 MODEL NUMBER EXPLANATION LT 180 H 42 I B V 2 MODE.
2 IMPORTANT SAFETY INSTRUCTIONS WARNING: This pow erful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply w ith the follow ing SAFETY instructions could result in serious injury or death to the operator or other persons.
3 IMPORTANT SAFETY INSTRUCTIONS PREPARATION (Continued From Previous Page) 6. Check the area to be mow ed and remove all objects such as toys, w ire, rocks, limbs and other objects that could cause injury if thrown by blade or interfere w ith mow ing.
4 IMPORTANT SAFETY INSTRUCTIONS TOWING 1. Tow only w ith a machine that has a hitch designed for tow ing. DO NOT attach tow ed equipment except at the hitch point. 2. Follow the manufacturer’s recommendation for w eight limits for tow ed equipment and tow ing on slopes.
5 TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS .................. 2 - 4 TABLE OF CO NTENTS ................................................. 5 SECTION 1 - FAMI LIARIZATI ON .................................. 6 Compone nts ..........................
6 Section 1 - FAMILIARIZATION FIGURE 1.1 COMPONENTS The nomenclature drawings above, illustrate the essential components of the SNAPPER Lawn Tractor. It is recommended that all operators of this equipment become thoroughly familiar with the components and their operation BEFORE OPERATING.
7 Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECKLIST Make the following checks and perform service as required before each start-up. 2.1.1. Check tires and add air as needed to bring pressure to 12 P.S.I. in front tires and 12 P.S.I. in rear tires.
8 Section 2 - OPERATING INSTRUCTIONS 2.3 STARTING & OPERATION 2.3.1. STARTING ENGINE 1. Take a comfortable position in seat of machine, look around to make sure that the area you are going to mow is clear of people, children and pets.
9 Section 2 - OPERATING INSTRUCTIONS 2.3 STARTING & OPERATION (Continued) 2.3.2. STARTING WHEEL DRIVE 1. Shift speed control lever to neutral. 2. Start engine. Refer to Section “STARTING ENGINE”. 3. Release clutch/brake pedal. 4. Slowly shift speed control lever forward for forward motion or to the rear for reverse motion.
10 Section 2 - OPERATING INSTRUCTIONS 2.4 STOPPING 2.4.3. STOPPING MOWER BLADES 1. Stop mower blade by p u sh i ng bl ades switch IN to disengage blades. See F i g u r e 2 . 1 1 . FIGURE 2.11 WARNING Once blades are disengaged, they should come to a complete stop in 5 seconds or less.
11 Section 2 - OPERATING INSTRUCTIONS 2.6. ROLLING TRACTOR WITH ENGINE OFF 2.6.1. Rolling Hydro Models 1. With engine "OFF", move to rear of tractor. 2. Pull the roll release control all the way out to disengage the hydro transmission. See Figure 2.
12 Section 2 - OPERATING INSTRUCTIONS 2.7. REVERSE LOCKOUT MECHANISM Data indicates that tragi c back-over accidents occur each year. These accidents usually involve unsupervised children.
13 Section 3 – MAINTENANCE 3.1 INTRODUCTION To retain the quality of the Tractor, use genuine SNAPPER replacement parts only. Contact a loca l SNAPPER dealer for parts and service assistance. For the correct part or information for a particular Tractor, al w a y s m e nt i o n the model and serial number.
14 Section 3 - MAINTENANCE WARNING DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remov e key. Remove spark plug wire from spark plug and secure aw ay from plug. Engine and components are HOT.
15 Section 3 - MAINTENANCE 6. Air Filter – Single Cylinder Engine Refer to engine owner’s manual for service instructions. a. Change air filter. Pull up and rotate the air cleaner latch to remove cleaner cover. See Figure 3.5. IMPORTANT: When cover is removed, you are viewing the carburetor side of the air filter, which will appear clean.
16 Section 3 - MAINTENANCE 3.3.3. MOWER COMPONENTS 1. Check deck drive belt for proper tension. Refer to Section, “CHECK DECK DRIVE BELT”. 2. Check blades for sharpness, wear, damage and torque. Refer to Section on “MOWER BLADE SERVICE”. 3. Check mower deck for proper levelness.
17 Section 3 - MAINTENANCE 3.3.5. TRACTOR LUBRICATION 6. Steering Drag Link Lubricate both ends of steering drag link with a small amount of 30 wt. motor oil from an oil can. See Figure 3.10. FIGURE 3.10 7. Steering Tie Rod Lubricate both ends of steering tie rod with a small amount of 30 wt.
18 ADJ U S T I N G NUT (3) INSPECTION SLOT (3) .012” TO .014” FEELER GA UGE Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key .
19 Section 4 – ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key . Remove spark plug wire from spark plug and secure w ire aw ay from spark plug.
20 Section 4 - ADJUSTMENT & REPAIR 4.2.5. MOWER DECK ADJUSTMENT (LEVELNESS) SIDE-To-SIDE (48” Decks) Before making deck leveling adjustments, check the tire pressure. Check tires and add or release air as needed to bring pressure to 12 PSI in front and 12 PSI in rear tires.
21 Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key . Remove spark plug wire from spark plug and secure w ire aw ay from spark plug.
22 Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key . Remove spark plug wire from spark plug and secure w ire aw ay from spark plug.
23 Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key . Remove spark plug wire from spark plug and secure w ire aw ay from spark plug.
24 Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key . Remove spark plug wire from spark plug and secure w ire aw ay from spark plug.
25 Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key . Remove spark plug wire from spark plug and secure w ire aw ay from spark plug.
26 Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key . Remove spark plug wire from spark plug and secure w ire aw ay from spark plug.
27 Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key . Remove spark plug wire from spark plug and secure w ire aw ay from spark plug.
28 Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key . Remove spark plug wire from spark plug and secure w ire aw ay from spark plug.
29 Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key . Remove spark plug wire from spark plug and secure w ire aw ay from spark plug.
30 Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key . Remove spark plug wire from spark plug and secure w ire aw ay from spark plug.
31 Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blades running. STOP blades. STOP engine. Set brake. Remove key . Remove spark plug wire from spark plug and secure w ire aw ay from spark plug.
32 Section 4 - ADJUSTMENT & REPAIR WARNING Never attempt to charge the battery w hile it is installed on the machine. DO NOT use “BOOST” chargers on the battery. 4.5.5. BATTERY TESTING 1. Remove battery. Refer to section “BATTERY REMOVAL”.
33 Section 4 - ADJUSTMENT & REPAIR AVAILABLE ACCESSORIES The SNAPPER LAWN TRACTOR can be equipped w ith a vari ety of accessories that increase its versatility . The accessories available for each model are listed in the chart below . Contact an authorized SNAPPER dealer for ordering any of the accessories desired.
34 SECTION 5 - ELECTRICAL SYSTEM ELECTRICAL - B & S TWIN CYLINDER ENGINE.
35 SECTION 5 - ELECTRICAL SYSTEM ELECTRICAL - B & S SI NGLE CYLINDER ENGINE.
36 TROUBLESHOOTING GUIDE PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Starter Will Not 1. Battery dead. 1. Service battery. Crank Engine 2. Blown fuse. 2. Replace fuse. 3. Electrical connections l oose or corroded. 3. Clean and check connections for good contact.
37 TROUBLESHOOTING GUIDE (Continued From Previous Page) PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Tractor Will Not 1. Speed control handle in the neutral “N” position. 1 . P l a c e s peed control in desired speed. Move Or Loss Of 2. R o ll r e le a se c on tr o l i n “ RO L L” po s it i on .
38 MAINTENANCE SCHEDULE SUBJECT SERVICE TO BE PERFORMED REFERENCE PAGES EACH USE 5 HOURS 25 HOURS 50 HOURS 100 HOURS EACH SEASON Engine Check Oil Level Page 7 X Engine Initial Oil Change Page 13 X Eng.
39 2 YEAR LIMITED WARRANTY For two (2) years from purchase date for the orig inal purchaser's residential, non-commercial use, SNAPPER , through any authorized SNAPPER dealer will replace, free o.
40 PRIMARY MAINTENANCE.
41 PRIMARY MAINTENANCE.
42 PRIMARY MAINTENANCE.
43 PRIMARY MAINTENANCE.
44 SNAPPER PRODUCT REGISTRATION FORM IMPORTANT: KEEP THIS INFORMATION FOR YOUR PERSONAL RECORDS (Complete the following informa tion on your Snapper purchase) Model Number ____________________________.
45 SERVICE NOTES ___________________________________________________________________ ___________________________________________________________________ _______________________________________________.
46 SERVICE NOTES ___________________________________________________________________ ___________________________________________________________________ _______________________________________________.
47 SERVICE NOTES ___________________________________________________________________ ___________________________________________________________________ _______________________________________________.
48 Safety Instructions & Operator’s Manual for LAWN TRACTOR HYDROSTATIC DRIVE ELECTRIC CLUTCH SERIES I IMPORTANT Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contain very important emissions information and critical safety w arnings.
Ein wichtiger Punkt beim Kauf des Geräts Snapper LT180H42IBV2, LT200H42IBV2, LT200H48IBV2 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Snapper LT180H42IBV2, LT200H42IBV2, LT200H48IBV2 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Snapper LT180H42IBV2, LT200H42IBV2, LT200H48IBV2 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Snapper LT180H42IBV2, LT200H42IBV2, LT200H48IBV2 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Snapper LT180H42IBV2, LT200H42IBV2, LT200H48IBV2 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Snapper LT180H42IBV2, LT200H42IBV2, LT200H48IBV2 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Snapper LT180H42IBV2, LT200H42IBV2, LT200H48IBV2 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Snapper LT180H42IBV2, LT200H42IBV2, LT200H48IBV2. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Snapper LT180H42IBV2, LT200H42IBV2, LT200H48IBV2 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
