Benutzeranleitung / Produktwartung SFR30 des Produzenten Smeg
Zur Seite of 12
Dear Customer, Thank you for purchasing one of our products. We are confident that this practical and modern appliance, made with top quality materials, will satisfy your needs in every way. This new piece of equipment is simple to use but, before operating it, please read this booklet carefully for best results.
TYPE: FD30 14 1 Heating resistance 2300 W 2 Fryer kettle 3 Fryer control knob 4 Appliance on/off indicator lamp Caution: this appliance is designed for personal household use only .
1) SWITCHING ON THE FR YER The fryer is controlled by a thermostat and it can be switched on by turning the knob clockwise to the position desired (see fig. 1). A red indicator lamp indicates it is switched on. Automatic cut-off switch The appliance is provided with a cut-off device which intervenes if the oil temperature exceeds the safety limit.
16 USE CAUTIONS FOR FRYING Only oil or vegetable fat should be used for frying. Amount of oil / fat min. 2 - max. 2.5 l. Avoid mixing different types of oil / fat. It is important to fry at the right temperature for good results. · Temperature too low: the food to be fried cooks too slowly and absorbs oil / fat.
17 CLEANING 2) CLEANING THE FR YER With the proper care the fryer will maintain its shine for a long time and will be easier to clean. Use a sponge, water and soap (or a product available on the market) to clean stainless steel parts, but only when the appliance is cool.
18 INST ALLA TION TECHNICAL DA T A FOR INST ALLERS Installation and maintenance listed in this section must only be carried out by qualified personnel (law n° 46 and D.P .R. 447). A faulty installation can cause damage to persons, animals or objects, towards whom the manufacturer cannot be held responsible.
4) SECURING THE FR YER To secure the fryer to the worktop the fastening clamps accompanying this booklet must be assembled. The following procedures must be carried out to do this: · remove all movab.
20 5) ELECTRICAL CONNECTIONS The electrical connection must be made in conformity with current rules and regulations. Before making a connection, check that: - The capacity and outlets of the electrical installation are suitable for the maximum power output of the appliance (see the information label attached on the underside of the housing).
Name W 21 Heating resistance 2300 TYPE AND SECTION OF POWER CABLES 2300 W 3 X 1.5 mm 2 (*) ELECTRICAL COMPONENTS OUTPUT MAINTENANCE Before carrying out maintenance of any kind, disconnect the appliance from the mains. All maintenance must be carried out by authorized personnel only .
22 TECHNICAL SPECIFICA TIONS DEEP F A T FR YER Voltage 230 – 240 V ~ Frequency 50/60 Hz Total nominal power 2300 W.
23 TECHNICAL ASSIST ANCE AND SP ARE P ARTS Before leaving the factory, this equipment was tested and adjusted by skilled personnel so as to guarantee the best operating results. Original spare parts can only be found at our technical service centres and authorized stores.
24.
Ein wichtiger Punkt beim Kauf des Geräts Smeg SFR30 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Smeg SFR30 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Smeg SFR30 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Smeg SFR30 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Smeg SFR30 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Smeg SFR30 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Smeg SFR30 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Smeg SFR30. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Smeg SFR30 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.