Benutzeranleitung / Produktwartung SAP112-8 des Produzenten Smeg
Zur Seite of 65
SAP112-8 electric oven operating and installation instructions.
3 Contents INSTRUCTIONS FOR THE USER: these contain use r advice, description of the commands and the correct procedures fo r cleaning and maintenance of the appliance. INSTRUCTIONS FOR THE INST ALLER: th ese instructions are intended for the qualified tec hnician who m u st pe rf orm the installation, put it into operation and test the appliance.
General instructions 4 1. INSTRUCTIONS FOR USE THIS MANU AL IS AN INTEGRAL P ART OF THE APPLIANCE. IT MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLA CE FOR THE WHOLE W ORKING LIFE OF THE APPLIANCE. CAREFUL READING OF THIS MANUAL AND ALL THE INSTR UCTIONS THEREIN BEFORE USING THE APPLIANCE IS ESSENTIAL.
General instructions 5 DO NO T USE STEEL SPONGES AND SHARP SCRAPERS AS TH EY WILL D AMAGE THE SURF ACE. USE NORMAL NON-ABRASIVE PR ODUC TS, INCLUDING W OODEN OR PLASTIC UTENSILS IF NECESSARY . RINSE THOROUG H L Y AND DR Y USING A SOFT CLO T H OR A MICROFIBRE CLO TH.
General instructions 6 2. SAFETY PRECA UTIONS REFER T O THE INST ALLA TION INSTRUCTIONS FOR THE SAFETY REGULA TIONS FOR ELECTRIC OR GAS APPLIANCES AND VENTILA TION FUNCTIONS.
General instructions 7 DO NO T LET CHILDREN GO NEAR THE APPLIANCE WHEN IT IS IN OPERA TION OR PLA Y WITH IT A T ANY TIME. DO NO T INSERT POINTED MET AL OBJECTS (CUTLER Y OR UTENSILS) INTO THE SLITS IN THE APPLIANCE. DO NO T USE STEAM JETS FOR CLEANING THE APPLIANCE.
Instructions f or disposal 8 3. ENVIR O NMENT AL RESPONSIBILITY Our product's packing is made of non-polluting mater ials, which are theref ore compatible with the environment and recyclable.
Instructions f or the User 9 4. GET T O KNO W Y OUR O VEN Control panel Oven f an Roof liner Bottom pl ate (on some models only) Inside lights Pizza plate or cov er recess (on some models only) Rack a.
Instructions f o r the User 10 5. A V AILABLE A CCESSORIES NO TE: Some models are not pro v ided with all accessor ies. Rack: f or holding cooking containers. T ray r a ck: to be pl aced ov e r the top of the oven tra y; for cooking f oods which may drip .
Instructions f or the User 11 Pizza spatula: for easy placement of the pizza on the pizza p late. Pizza plate cover: for co vering the pizza plate when it is not in use. • Accessories availab l e on request: Original supplied and optional a ccessor ies ma y be ordered from any Authorised Suppor t Centre.
Instructions f o r the User 12 5.1 Using the rack or tray The racks and tr ays are equipped with a mechanical safety lock which pre vents them from being taken out accidentally . T o inser t the rack or tra y correctly , check that the lock is f acing downwards (as shown in the illustration on the right).
Instructions f or the User 13 5.4 Using the r otisserie r od (on some models onl y) When cooking with the rotisser ie, position the frame on the third runner (see 6.2.1 Oven runners). Once the frame is inser ted, the shaped par t must sit facing outwards (as shown in the illustration).
Instructions f o r the User 14 5.5 Using the pizza plate (on some models onl y) With the ov en cold, remove the circular cov e r from the bottom (as shown in the illustration) and inser t the pizza pla te. Make sure that the plate is inser ted correctly in the recess provided.
Instructions f or the User 15 6. USING THE O VEN 6.1 Before u sing the appliance • Remo ve any labels (apar t from the tech nical data plate) fro m tra y s, dripping pans and the cooking compar tment.
Instructions f o r the User 16 6.2.3 Oven inside lights The ov en li ghts come on when the do or is opened or any function or recipe is selected, e xcept for , and (where present). When set to ON, the oven lights can be switched on/ off by pressing the on/off button.
Instructions f or the User 17 T o prev ent any steam in the ov en fro m causing problems, open the door in two stages: half open (5 cm approx.) f or 4-5 seconds an d then fully open.
Instructions f o r the User 18 6.4 Description of the contr ols on the front panel All the appliance's control and monitor ing devices are located together on the front panel. T emperature selection knob On/off knob This knob can be used to: set the clock, select a temperature and the cooking time, and set cooking programmes .
Instructions f or the User 19 If the symbols to the side of the display are lit up, it means: Indicates that the door lock is activated (on p yrolytic models only). In multifunction models, this symbol is replaced with which indica tes that the "showroom" mode is activated (see 6.
Instructions f o r the User 20 6.5 Operating modes This appliance has three ope rating modes which can be activated by pressing the on/off knob. ST AND-BY setting: the appliance displays the current time (activ ated as soon as the current time has been confir med).
Instructions f or the User 21 6.7 Setting the current time T ur n the temperature selecti on knob ri ght or left to reduce or increase the display ed ti me.
Instructions f o r the User 22 Cooking can be interrupte d at any time by holding down the ON/OFF knob fo r a t least two seconds . 6.8.1 Modifying the preset temperature The preset temperature f or each function can be changed to suit the user's requirements.
Instructions f or the User 23 If the timer was set in ST AND-BY mode, when the ov en is activated in ON mode (selection of a cooking operation), the counter is reset to zero. 6.9.1 Modifying the set data Once the countdown has started, press the temperature selection knob .
Instructions f o r the User 24 6.10 Cooking pro grammes 6.10.1 Semi-automatic cooking Semi-automatic cooking is the functio n which allows a cooking operation to be star ted and then ended after a specific length of time set by the user. Select a cooking function as descr ibed in 6.
Instructions f or the User 25 T o extend the cooking ti me manually (if the food has not been cooked proper ly), press the te mperature selection knob again. The applia nce will restar t its nor mal operation with the previously selected cooking settings.
Instructions f o r the User 26 6.10.2 A utomatic cooking Automatic cooking is the function which allows a cooking operation to be star ted at a set time and then ended after a specific length of time set by the user . Select a cooking function as descr ibed in “6.
Instructions f or the User 27 When cooking is complete, the word ST OP will appear , cook ing will be interr upted and a buzzer will sound which can be deactivated by pressing the temperature selection knob .
Instructions f o r the User 28 6.11 Selecting a recipe The appliance is equipped with preset re cipes and 1 free recipe. A recipe is a combination of preset functions, temperatures and cooking times. In the ON state only , a recipe can be selected by simply turning the ON/OFF knob to the right or left.
Instructions f or the User 29 6.11.1 Modifying the set data During cooking with a recipe, it is possible to modify the preset temperature by tur ning the temperature selection knob . T o alter the time, press the temperature selection knob then turn it right or left.
Instructions f o r the User 30 6.12 P ermanently modifyin g a recipe The appliance is equipped with preset recipes and three free recipes indi cated by . T o modify or set a recipe per manently: In ON mode, select the recipe to be modified by tur ning the ON/OFF knob right or left.
Instructions f or the User 31 Press the temperature selection knob to confirm the modification and go on to modifying the cooking time. (T e mperature knob) T ur n the temperature selecti on knob ri ght or left to alter the cooking time associated with the recipe.
Instructions f o r the User 32 6.13 T able of pred efined recipes: Class Ty p e Qty . Te m p . (°C) Cookin g time (min.) Funct. Runner Beef Roast beef 0.7 kg 200 30 1 kg 200 40 1.5 kg 200 65 Po r k Roast 0.5 kg 180 50 1 kg 190 80 1.5 kg 180 110 Chicken Roast chick en 0.
Instructions f or the User 33 The cooking times in the table refer to the f ood indica ted in the recipe and a re a guide only; they ma y vary depending on the weight. The table giv es the factory-set data. T o reset a recipe with the or iginal settings after it has been modified, just enter the data given in the tab le.
Instructions f o r the User 34 6.14 Secondary me nu The appliance also has a concealed se condar y menu allowing the user to: • Activate or deactivate the child lock mode. • Activ ate or deactivate Showroom mode (which disables all the heating elements so that only the control panel works).
Instructions f or the User 35 6.14.1 Child lock mode By activating this mode, after two min utes of operation without any inter vention from the user , the controls will automatically be locked, indicated by lighting up. T o temporar ily release the lock during cooki ng, hold down the temperature selection knob for 5 seconds.
Instructions f o r the User 36 7. COOKING WITH THE O VEN ECO: Using the grill and the low e r heating element in combinati on is par ticular ly suitable for cooking on one set of runners only , a s it provides low energy consumption.
Instructions f or the User 37 F AN-ASSISTED GRILL: The air produced by the fan softens the strong heatwav e generated by the grill, giving perfect grilling e ven with v er y thick f oods. P erfect f or larg e cuts of meat (e.g. shin of pork). We recommend using the 4 th set of runn ers.
Instructions f o r the User 38 7.1 Cooking ad vice and instructions 7.1.1 General advice W e recommend preheating the oven bef ore putting the f ood in. Do not place foods inside the ov en until on the display stops flashing and the beep has sounded to confir m that the programmed temp erature has been reached.
Instructions f or the User 39 When defrosting meat, we recomme nd using a rack positioned on th e second runner with the food on it and a tra y p ositioned on the first r unner . In this way , the liquid from the defrosting food dr ains aw ay from the f oo d.
Instructions f o r the User 40 7.3 Cooking pro cess inf ormation table DISHES WEIGHT FUNCTION FIRST COURSES LASAGNE 3 kg Static O VEN-BAKED P AST A Static MEA T RO AST VE AL 1 kg F an-as sisted static.
Instructions f or the User 41 RUNNER POSITION FRO M BO TT OM TEMPERA TURE °C TIME IN MINUTES 1 220 - 230 40 - 50 12 2 0 - 2 3 0 4 0 2 180 - 190 70 - 80 2 180 - 190 70 - 80 2 180 - 1 90 90 - 100 2 180.
Instructions f o r the User 42 DISHES WEIGHT FUNCTION PIZZA F an-assisted static BREAD Circular FOCA CCIA Tu r b o DESSERTS DOUGHNUT F an-assi sted static FR UIT T AR T F an-assisted static FR UIT T A.
Instructions f or the User 43 RUNNER POSITION FRO M BO TT OM TEMPERA TURE °C TIME IN MINUTES 1 250 - 280 6 -10 2 190 - 200 25 -30 2 180 - 190 15 -20 2 160 55 - 60 2 160 30 - 35 2 170 35 - 40 2 160 - .
Instructions f o r the User 44 7.4 Pro ving and defrost i ng functions On py ro lytic models, the special defrosting and proving functions are brought togethe r under the same function indicate d by . The choice of temp erature deter mines whether defrosting or proving takes place based on the table belo w .
Instructions f or the User 45 8. CLEANING A ND MAINTENANCE NEVER USE A STEAM JET FOR CLEANING THE APPLIANCE. We recommend the use of cleaning products distributed by SMEG. 8.1 Cleaning stai nless steel T o keep stainless steel in good condition it should be cleaned regular ly after use.
Instructions f o r the User 46 8.5 Cleaning the inside of the o ven F or the best oven upk eep, clean it regular ly afte r having allowed it to cool. • T ake out al l removab le p ar ts. • Clean the oven rac ks with hot water and non-abrasive detergent.
Instructions f or the User 47 Lift up the edge of the lower heating element a fe w centimetres and clean the bottom. Put the pizza plate suppor t back in place, pushing it in until it hits the back of the o ven, and push it down so that the heating element plate is embedded into the base itself.
Instructions f o r the User 48 8.6 Cleaning the pizza pl ate The pizza plate (where included) sh ould be washed separately according to the f o llowing instructions: Pyrol ytic models: leave the pizza.
Instructions f or the User 49 8.7 Pyr olysis: automati c oven cle aning (on so me models only) Pyrolysis is an automatic high-temperature cleani ng procedure which causes dir t to dissolve. Thanks to this process, it is possible to clean the inside of the ov en ver y easily .
Instructions f o r the User 50 • Remove the guide frames, see “8.5.1 Removing guide frames”. • At the end of the cleaning cycle, when the ov en ha s cooled down, reinser t the frames by repeating the pre viously used procedure in rev erse order .
Instructions f or the User 51 8.7.2 Setting the cleaning cyc le In ON mode (see 6.5 Operating modes), tur n the ON/OFF knob right or left to select one of the two cleaning cycles out of and . (ON-OFF knob) T o star t the cleaning cycle (pyrolysis), the temperature selection knob must be pressed.
Instructions f o r the User 52 T o selec t a cleaning cyc le with delayed start , after setting the duration press the temperature selection knob once. and the current time will appear on the display . (T emperature knob) T ur n the knob r ight or left to increase or decrease the time when you w ant to star t the cleaning cycle.
Instructions f or the User 53 8.8 V APOR CLEAN: assisted oven cleaning (on some models only) V APOR CLEAN is an assisted cleanin g pr ocedure which facilitates the remov al of dir t. Thanks to this process, it is possible to clean the inside of the oven v er y easily .
Instructions f o r the User 54 • Spra y a water and washing up liquid solution inside the oven using a spra y nozzle. Aim the spra y towards the side walls, roof , floor and deflector (the coloured zone on the illustration to the side shows where the solution can be spra yed).
Instructions f or the User 55 P a rameters such as the duration an d temperature of the cleaning cyc le cannot be modifie d. 8.8.3 End of the assi sted c leaning cyc le The water remaining at the end of the assisted cle aning cycle cannot be left inside the oven f or long (for e xample overnight).
Instructions f o r the User 56 9. EXTRA ORDINAR Y MAINTENANCE The ov en may require extraordinary ma intenance or repla cement of par ts subject to wear such as gask ets, b ulbs, etc. The fo llowing instructions descr ibe how to carry out these minor main tenance operations.
Instructions f or the User 57 9.2 Remo ving the door 9.2.1 With mo veable lever s Open the door completely . Lift the lev ers A of the two hinges aw ay from them until they engage. Grasp the door on both sides with both hands, lift it forming an angle of around 30° and remove it.
Instructions f o r the User 58 9.2.2 With pi ns Open the door co mpletely . Inser t two pins into the holes indica ted A in the two hinges towards the back of them until they engage . Grasp the door on both sides with both hands, lift it f or ming an angle of arou nd 30° and remov e it.
Instructions f or the User 59 9.3 Remo ving the door seal For multifunction mo dels only: T o per mit thorough cleani ng of the ov en, the door seal may be remo ved. There are fasteners on all f ou r sides to attach it to the edge of the oven. Pull the edges of the seal outwards to detach the f asten ers.
Instructions f o r the User 60 Remo ving the internal glass panel: • Remov e th e inter nal glass panel by pulling it upwards, f ollowing the mov ement indi cated by the arrows . Doing this detaches the 4 pins attached to the glass from their slots in the ov en door .
Instructions f or the User 61 9.5 What to do if ... The ov en disp lay is completely off • Check the mains power supply . • Che ck whether an omnipolar switch upstream of the ov en supp ly line is in the “ON” position. The ov en do es not heat up • Check whether it has been set in “showroom” mode, f or fur ther details see “6.
Instructions f o r the installer 62 10.INST ALLING THE APPLIANCE 10.1 Electrical c onnection The identification plate bear ing the technical data, serial number and brand name is visibly positioned on the appliance. Do not remove this plate f or any reason.
Instructions f o r the installer 63 10.2 Cab le replacement Should the supply cable need replacing, remov e the back guard by unscre wing the screws to gain access to the ter minal. Replace the cable. The cab le cross- section must be no less than 1.5 mm² (3 x 1.
Instructions f o r the installer 64 When installing in ta ll units, comply with the dimensions shown in figures 1 and 2 , bearing in mind that the top/rear of the unit must hav e an ope ning 35-40 mm deep . Remove the screw co vers on the fr a me and screw in the 2 scre ws A (fig.
Instructions f o r the installer 65 FIG. 2 FIG. 3 FIG. 4 FIG. 5.
914773863/ A.
Ein wichtiger Punkt beim Kauf des Geräts Smeg SAP112-8 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Smeg SAP112-8 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Smeg SAP112-8 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Smeg SAP112-8 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Smeg SAP112-8 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Smeg SAP112-8 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Smeg SAP112-8 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Smeg SAP112-8. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Smeg SAP112-8 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
