Benutzeranleitung / Produktwartung SMC9452TX-2 des Produzenten SMC Networks
Zur Seite of 41
EZ Connect N Draft 11n Wireless USB2.0 Adapter EZ CARD 10/100/1000 32-bit 10/100/1000Mbps Gigabit Ethernet PCI Adapter SMC9452TX-2.
Copyright Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
Limited Warra nty Limited Warranty St atement: SMC Networks, Inc. (“SMC”) warran ts its products to be free fro m defects in workmanship and materials, under normal us e and service, for the applicabl e warranty term. All SMC prod ucts carry a stand ard 90-day limit ed warranty from the date o f purchase from SMC or its Authorized Reseller.
WARRANTIES AND RE MEDIES ARE E XCLUSIVE A ND ARE IN LIEU OF ALL OT HER WARRANTIES OR CON DITIONS, EXPRESS O R IMPLIED, E ITHER IN FACT OR BY OPERATION OF LAW, STATUTOR Y OR OT HERWISE, INCL UDING WARRANT IES OR CONDITIONS OF MERC HANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Compliances FCC - Class A This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen tial installation.
power supply: ±1 kV, Data/Signal lines: ±0.5 kV) • Surge immunity test according to EN 61000-4-5:1995 (AC/DC Line to Line: ±1 kV, AC/DC Line to Earth: ±2 kV) • Immunity to conducted disturbances, Induced by radio-frequency fields: EN 61000-4-6:1996 (0.
Veuillez lire à fond l’information de la sécurité suivante avant d’installer le Device: AVERTISSEMENT: L.installation et la dépose de ce groupe doivent être confiés à un personnel qualifié.
nur gegeben, wenn auch die an das Gerät angeschlossenen Geräte unter SELV-Bedingungen betrieben werden Stromkabel . Dies muss von dem Land, in dem es benutzt wird geprüft werden: Schweiz Dieser Stromstecker muß die SEV/ASE 1011Bestimmungen ein- halten.
Achtung: Installation und Deinstallation des Gerätes müssen von qualifiziertem Servicepersonal durchgeführt werden. Achtung: Wenn das Gerät an eine Steckdose angeschlossen wird, muß der Masseanschluß n Netzstecker mit Schutzerde verbunden werden, um elektrische Gefahren zu vermeiden.
Environmental Statement The manufacturer of this product endeavours to sustain a n environmentally-friendly policy throughout the entire production process. This is achieved though the following means: • Adherence to national legislation and regulation s on environmental production standards.
Package Contents The following items should be found in your box: ¾ One 10/100/1000Mbps Gigabit Ethernet PC Adapter ¾ One Resource CD, including • Drivers • User Guide • Other Helpful Information ) Note: Make sure that the package contai ns the above items.
CONTENT Chapter 1. Introduction ............................................................................................ 1 1.1 Convention ......................................................................................................... 1 1.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 1 Chapter 1. Introduction Thank you for choosing SMC9452TX- 2 Gigabit PCI Ethernet Adapter. 1.1 Convention The Adapter or SMC9452TX-2 mentioned in th is User Guide stands for SMC9452TX- 2 Gigabit PCI Ethernet Adapter.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 2 1.3 Main Features ¾ Integrated Ethernet MAC, Physical chip and transceiver in one chip ¾ Complies with the IEEE802.1P, IEEE 802.1Q, IEEE802.3 10Bas e-T, IEEE802.3u 100Base-TX and IEEE802. 3ab 1000Base-T standard ¾ Compliant to PCI Revision 2.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 3 Chapter 2. Installation 2.1 Hardware Inst allation To install the adapter, follow these steps listed below: Step 1: Turn off your computer and unplug the power cord and all cables. Step 2: Remove you r computer’s case cover.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 4 2.2 Sof tware Inst allation In this User Guide, we will take the driver installation in Windows XP for ex ample, which is similar to the driver installation procedures for the other operation systems.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 5 Step 2: Select Install from a list or specific location (Advanced) as shown in Figure 2-3 , and then click Next . Figure 2-3 Step 3: Select Don’t search. I will choose the driver to install as shown below.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 6 Step 4: Select Show All Devices as shown in Figure 2-5 , then click Next . Figure 2-4 Step 5: Click Have Disk… in the next screen Figure 2-6 .
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 7 Step 6: After that, select Browse… as shown in Figure 2-7 to locate the driver in the next screen.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 8 ), click OK . Step 8: After that, you will see the next screen (shown in Figure 2-9 Figure 2-8 , then click Next .
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 9 Step 10: After that, please wa it few seconds for the wizard installing the software. Figure 2-10 ) Note: During the installation, a warning box a.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 10 Step 11: Finally, click Finish. And the driver installati on for Windows XP completes. Figure 2-12.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 11 2.2.2 Update driver for XP If the Welcome to the Found Ne w Hardware Wizard screen does not appear after you insert the Adapter, you can follow the steps below to install the driver, and you can also upgrade the latest driver available on the CD-ROM in this way.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 12 Step 3: Right-click SMC9452TX- 2 Gigabit PCI Ethernet Adapter , then select Update Driver… in Figure 2-16 . (Note: If the driver was install ed exactly, you may see "Ethernet Controller" instead.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 13 Step 5: Select Install from a list or specific location (Advanced) as shown in Figure 2-18 , and then click Next . Figure 2-18 Step 6: Select Don’t search. I will choose the driver to install as sho wn below.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 14 , then click Next . Step 7: Select the model of the Adapter as shown in Figure 2-20 Figure 2-17 Step 8: After that, select Browse… to locate the driver in the next screen.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 15 Step 9: Locate the appoint ed driver as shown in Figure 2-22 , click Open . Figure 2-22 Step 10: After that, you w ill see the next screen, click OK . Figure 2-18 ) Note: Assuming D is the letter of your CD-ROM drive.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 16 Step 11: Select the model of the Card as shown in Figure 2-24 , then click Next . Figure 2-24 Step 12: After that, please wa it few seconds for the wizard installing the software.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 17 ) Note: During the installation, a warning box about Windows Logo testing (shown in Figure 2-11 ) may pop up, please click Continue Anywa y to continue the installation since our drivers have been tested thoroughly and are able to work with the operating system.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 18 2.2.3 Update driver for Vista step 1. Insert the Driver & Inst allati on CD into your CD-ROM drive, r ight -click the Computer icon as shown in the Figure 2-28 , select the Properties . Figure 2-19 step 2.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 19 step 3. Right-click the adapter icon “ Realtek RTL8169/ 8110 Family Gigabit Ethernet NIC ”, and select “ Update Driver Software… ” to proceed. Figure 2-21 step 4. Select “ Browse my computer for driver software ” to install the software.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 20 step 5. Click the “Let me pick from a list of device drivers on my computer” in the next screen.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 21 step 7. After that, select “ Brow se…” to locate the driver in the next screen. Figure 2-25 step 8.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 22 step 9. After that, you will see the next screen (shown in Figure 2-36 ), click OK . Figure 2-27 ) Note: Assuming D is the letter of your CD-ROM drive. step 10. Select the model of the Card as shown in Figure 2-37 , then click Next .
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 23 step 11. After that, the insta llation will proceed as shown in Figure 2-38 . Figure 2-29 ) Note: During the installation, you will s ee the warning box as shown in Figure 2-39 , please select “Install this driver software anyway” to proceed.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 24 step 12. Finally, the installation will complete, y ou will see the next screen below, click Close to complete.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 25 2.3 Enable W ake on LAN function This function allows a remote st ation “wake” your computer when it is in Standby or Hibernate mode or after shutdown.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 26 c) Right click “ SMC9452TX-2 Gigabit Ethernet PCI Adapter ”, and then select “ Properties ” d) Select the Advance title on the next advanced conf igure page, then highlight the Wake-On-Lan After Shutdown item and set the value as Enable .
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 27 ) Note: 1) The name of this Wake-On-Lan After Shutdown function is system-dependent, and it may be located in a category heading titled such as “Power Management”. See your computer’s user guide for more information regarding the BIOS Setup utility and BIOS settings.
SMC9452TX-2 Gigabit PCI Ethernet Adapter User Guide 28 Appendix A: Specifications Normal Interface 32-bit PCI Standards IEEE 802 .3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.ab 1000Base-T Access Protocol CSMA/CD Connector one 10/100/1000M Auto-Negotiation RJ45 port Driver Novell NetWare3.
SMC9452TX-2.
Ein wichtiger Punkt beim Kauf des Geräts SMC Networks SMC9452TX-2 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie SMC Networks SMC9452TX-2 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für SMC Networks SMC9452TX-2 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von SMC Networks SMC9452TX-2 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über SMC Networks SMC9452TX-2 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon SMC Networks SMC9452TX-2 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von SMC Networks SMC9452TX-2 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit SMC Networks SMC9452TX-2. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei SMC Networks SMC9452TX-2 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
