Benutzeranleitung / Produktwartung SMC2632W des Produzenten SMC Networks
Zur Seite of 58
EZ Connect ™ W ir eless PC Card 11 Mbps data rate – provides alternati v e to wired LANs that can dramatically cut costs W orking range up to 160 m (528 ft) at 11 Mbps, 350 m (1155 ft) at .
.
38 T esla Irvine, CA 92618 Phone: (949) 679 -8000 EZ Connect W ir eless PC Card User Guide The easy way to make all your network connections April 2002 Revision Number: F1.
Copyright Information fur nished by SMC Networks, Inc. (SMC ) is believed to be ac curate and reliab le. However , no re sponsibility is assumed by SMC for its use, nor for any i nfringements of patents or other rights of third parties which m ay result from its use.
i L IMITED W ARRANTY Limited W arranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be free from defects in workmanship and mat erials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from the date of purchase from SMC or its Authorized Reseller .
L IMITED W ARRANTY ii W ARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERA TE AS W ARRANTED ABOVE, CUSTOMER ’ S SOLE REMEDY SHALL BE REP AIR OR REPLACEMENT OF THE PRODUCT IN QUES TION, A T SMC ’ S OPTION.
iii C OMPLIANCES FCC - Class B This equipment h as been tested and found to comply with the limits for a Class B digital device , pursuant to Par t 15 of the FCC Rul es. These limit s are designed to provide reason able protection against harmful inte r ference in a r esidential installation.
C OMPLIANCES iv Industry Canada - Class B This digital apparatus does not exceed t he Class B limits for radio noise emissions from digital apparatus as set out in the interferenc e-causing equipment standard entitled “ Digital Apparatus, ” ICES-003 of Indust ry Canada.
C OMPLIANCES v Safety Compliance Wichtige Sicher heitshi nweise (Germany) 1. Bitte lesen Sie diese Hinweise sor gf ä ltig durch. 2. Heben Sie die se Anleitung f ü r den sp ä teren Gebrauch auf. 3. V or jedem Reinigen ist das Ger ä t vom St romnetz zu trennen.
C OMPLIANCES vi 14.W enn folgende Si tuationen auftreten ist das Ger ä t vom Stromn etz zu trennen und von einer qualifiz ierten Servicestelle zu ü berpr ü fen: a.Netzkabel oder Ne tzstecker sind besch ä dig t. b.Fl ü ssigkeit ist in d as Ger ä t eingedrungen.
vii T ABLE OF C ONTENTS EZ Connect™ Wireless PC Card . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T ABLE OF C ONTENTS viii Setting the C ommunication Dom ain . . . . . . . . . . . . . . . . . . . . . 34 Stationary Wire less PCs . . . . . . . . . . . . . . . . . . . . . . . . . 34 Roaming Wirele ss PCs . . . . . . . . . . . . . . . . . . . . . . . .
1 EZ C ONNECT ™ W IRELESS PC C ARD SMC ’ s EZ Connect Wireless PC C ard is an 11 Mbps wirel ess network adapter that seamlessly integrates with existing Ether net networks to support applications such as m obile users or temporary conferences.
EZ C ONNECT ™ W IR ELESS PC C ARD 2 • Easy installation • W orking range up to 160 m (52 8 ft) at 11 Mbps, up to 350 m (1155 ft) at 1 Mbps (indoor com munication) • Direct Sequence Spread-Spec.
S YSTEM R EQUIR EMENTS 3 companies who need additional workstations for peak periods. Auditors who require workgroups at customer sites • Access to databases for mobile workers Doctors, nurses, retailers, white-collar workers who need access to databases while being mo bile in a hospital, retail store, office , campus etc.
EZ C ONNECT ™ W IR ELESS PC C ARD 4 Package Checklist The EZ Connect Wireless PC Card package includes: • 1 Wireless PC Card (SMC2632 W) • 1 SMC2632W Driver , Utility, & Documentation CD • This User Guide Please register this product and upgrade the product warranty at www.
5 H ARDWARE D ESCRIPTION The EZ Connect Wireless PC Card supports 1, 2, 5.5 and 11 Mbps half-duplex connections to Ether net networks. This card is fully compliant with 2.4 GHz DSSS CSMA/CA wireless networking as defined in IEEE 802.1 1b. It can be installed in any notebook with a Type II PCMCIA slo t.
H ARDWAR E D ESCRIPTION 6 LED Indicator The EZ Connect Wireless PC Card include s two status LED indicators, as described i n the following figure and table. Link Status Status Description 802.11 AdHoc Flashing Green Indicates that the Wireless PC card is operating in the 802.
H ARDWA R E I NSTALLATION 7 H ARDWARE I NSTALLATION Wa r n i n g : Network cards are sensitive to static electricity. T o protect the card, alwa ys touch the metal chassis of your computer before handling the card. 1. Turn on your computer and boot your operating system.
H ARDWAR E I NSTALLATION 8 4. For Windows 95 (OSR2.1 or above)/98/Me /2000, PCMCIA card and socket services compliant with revision 2.10 of the PCMCIA specificatio n are required. Ple ase check the documents of your PCMCIA driver before installing the software driver for the EZ Co nnect Wireless PC Card.
9 D RIVER I NSTALLATION The installation CD labeled “ SMC2632W Driver , Utility, & Documentation CD, ” that comes with the package contains all the software drivers available fo r the EZ Connect Wireless PC Ca rd. Any new or upda ted drivers can be downlo aded from SMC ’ s W eb site at: http://www.
D RIVER I NSTALLATION 10 2. Windows 95/98/Me/2000 will automatical ly detect the new hardware and prompt you to install the driver needed. Click “ Next ” to find the driver . 3. Insert the driver installation C D into the CD-ROM, specify the location, E:driverwi n982k (assuming E: is the location of your CD-ROM drive), and click “ Next.
W INDOWS 95/98/M E /2000 D RIVER I NSTALLATION 11 4. Click “ Next ” to copy files from the CD. 5. Follow the on-screen instru ctions to comple te the installation.
D RIVER I NSTALLATION 12 Windows NT 4.0 Driver Installation 1. Insert the PC Card into a standard Type II or III PCMCIA slot in your notebook. 2. From the desktop, select “ Control Panel, ” double-click “ Network, ” click “ Adapters, ” and then click the “ Ad d ” button in the Network dialog box.
W INDOWS NT 4.0 D RIVER I NSTALLATION 13 4. Windows NT will ask for the drive/path con taining the SMC2632W Windows NT drivers. Insert the provided CD into the CD-ROM drive, type E:driverwin982 k (assuming E: is the location of your CD-ROM drive), and then click “ OK.
D RIVER I NSTALLATION 14 6. The Adapter Setup dialog box will appear . Configure the card as described below, and click “ OK. ” IRQ Level - Default: 5 (Che ck for available resources under Windows NT Diagnostics.) I/O Port Address - Default: 240 (Check for available resources under Windows NT Diagnostics.
W INDOWS XP D RIVER I NSTALLATION 15 8. After driver installation, the system will promp t you to restart the computer . C lick “ NO ” if you want to continue install ation for your network protocols and options. 9. Select the Services tab and Click “ Add.
D RIVER I NSTALLATION 16 2. Insert the “ SMC2632W Driver , Utility, & Documentation CD ” into your CD-ROM drive. 3. Check “ Install the software automatically (Recommended) ” and click “ Next. ” 4. Windows XP will find the “ SMC EZ Connect Wireless PC Card(SMC2632W-V2).
W INDOWS XP D RIVER I NSTALLATION 17 5. Though the software is fully compatible with Windows XP , it has not yet been Lo go tested by Microsoft. On the H ardware Installation screen click “ Continue Anyway. ” After the software has been installed , click “ Finish ” to complete the driver installation.
U TILITY I NSTALLATION 18 U TILITY I NSTALLATION T o comm unicate with SMC 11 Mbps Wireless devices, you m ay need to install and configure the Wireless PC Card. T o install the utility software: Note: Y ou may find that th e instructions here do not exactly match your version of Windows.
U TILITY C ONFIGURATI ON 19 U TILITY C ONFIGURATION Using the Wireless Utility in Windows 98, Me, NT, and 2000 Once the installation is complete, the configuration utility can be accessed from the “ Start ” menu, as shown below.
20 The configuration utility includes the following tools: Status – Allows you to mon itor network status and configure wireless adapter parameters. Statistics – Shows wireless adapter statistics. Site Survey – Scans/Shows all the a ccess points in range.
Q UICK -L AUNCH I CON 21 Click “ Change ” to configure the “ Operating Mode, ” “ Channel, ” “ SSID ” and “ Tx Rate. ” After making a configuration change, the Submit button will beco me enabled. Click “ Submit ” to save the changes.
U TILITY C ONFIGURATI ON 22 Statistics The Statistics screen displays “ Data Frames ” and “ Management Frames. ”.
Q UICK -L AUNCH I CON 23 Site Survey The Site Survey scans and displays all access points in the wireless LAN. Y ou can choose o ne of them to connect to by double-clicking on an entry .
U TILITY C ONFIGURATI ON 24 Encryption Encryption – Wired Equivalent Privacy (WEP) is implemented in the adapter to prevent unauthorized access. For more secure data transmissions, set encryption to “ 128-bit ” or “ 64-bit ” . Th e 128-bit setting gives a h igher level of security.
Q UICK -L AUNCH I CON 25 Manual Entry – “ Manual Entry ” allows you to manually enter key elements (two hexadecimal d igits in each block.) Default Key ID – Choose the Key ID that has the encry ption string you prefer . If you are using a key generated from the passphrase, you must u se the same passphrase and key o n each station.
U TILITY C ONFIGURATI ON 26 one of the key fields. The bit key must be in hexadecim al numerals (0~9, A~F , e.g., D7 0A 9C 7F E5.) 2. Click “ Apply. ” Advanced Screen Y ou can use this screen to set val ues for “ Fragmentation Threshold ” (Default: 2346 m eans Disabled), and “ R TS/CTS Threshold ” (Default: 2347 m eans Disabled).
Q UICK -L AUNCH I CON 27 Version The following scre en shows th e version infor mation..
U TILITY C ONFIGURATI ON 28 Using the Windows XP Configuration Tool Basic Settings 1. Right-click the network co nnection icon on the toolbar . 2. On the popup menu, click “ Status.
U SING THE W INDOWS XP C ONFIGURATION T OOL 29 3. Click “ Properties. ” The Wireless Network Connection Properties box will open. Click th e “ Wir el es s Ne two rk s ” tab.
U TILITY C ONFIGURATI ON 30 Advanced Settings Click the “ Genera l ” tab (see the prev ious screen). In the “ Connect using ” field, make sure that the ad apter shown is the SMC2632W V . 2 Wireless PC Card. 1. Click “ Configure. ” Click the “ Advanced ” tab.
U SING THE W INDOWS XP C ONFIGURATION T OOL 31 4. “ Rate (Mbps) ” is the data trans mission/r eception rate setting. It can be set to Auto, 1 Mbps, 2 Mb ps, 5.5 Mbps, 11 Mbps. Usually this should be set to Auto. In a radio frequ ency hostile environment, a lo wer rate can provide more stable transmission quality.
N ETWOR K C ONFIGURATI ON AND P LANNING 32 N ETWORK C ONFIGURATION AND P LANNING SMC ’ s EZ Connect Wireless Solution supports a stand-alone wireless network configuration, as well as an integrated configuration with 10/100 Mbps Ether net LANs.
N ETWORK T OPOLOGIES 33 Infrastructure Wireless LAN The SMC2655W access point can also provide wireless workstations with access to a wired LAN. An integrated wired a n d wireless LAN is called an infrastructure co nfiguration.
N ETWOR K C ONFIGURATI ON AND P LANNING 34 Setting the Communication Domain Stationary Wireless PCs The Basic Service Set (BSS) is the communication domain for each access point. For wireless P Cs that do not need to support roaming, set the domain identifier (SSID) for the wireless card to the SSID of the acce ss point you want to connect to.
S ETTING THE C OMMUNICATION D OMAIN 35 Before setting up an ESS for roaming, you need to choose a clear radio channel and ideal location for the access points to maximize perfor mance. (Refer to “ Troubleshooting ” on page 36 for detaile d information on installation and usage.
T R OUBLESHOOTIN G 36 T ROUBLESHOOTING Check the following troubleshooting items before co ntacting SMC T echnical Support. Adapter Installation Problems If your computer cannot find the EZ Connect Wi.
N ETWORK C ONNECTION P RO BL E MS 37 • Check for a defective com puter or PCMCIA connection by trying the adapter in another computer that is known to operate correctl y. • If it still do es not work , take out the wireles s adapter . D elete CW10.
T R OUBLESHOOTIN G 38 If your wireless station cannot com municate with a computer in the Ether net LAN when configured for Infrastructu re mode, check the following: • Make sure the access point which the station is associated with is powered on.
N ETWORK C ONNECTION P RO BL E MS 39 SMC Networks 802.11b Wireless Product Maximum Distance Table Important Notice Maximum distances posted below are actual tested distance thresholds.
S PECIFICATI ONS 40 S PECIFICATIONS General Specifications Functional Criteria Data Rate 1, 2, 5.5, 11 Mb ps T ransmission Mo de Half duplex Network Connectio n IEEE 8 02.
S OFTWAR E D RIVERS 41 Standards Confor mance Wireless Standard IEEE 802.11b Environmental T emperature Operating: 0 to 50 ° C (32 to 122 ° F) Storage: 0 to 70 ° C (32 to 158 ° F) Humidity 5 to 80.
T ER MI NOLOGY 42 T ERMINOLOGY The following is a list of ter minology that is used in this docume nt. Access Point – An intern etworking device that seamlessly connects wired and wireless networks. Ad Hoc – An ad hoc wireless LAN is a group of computers, each with LAN adapters, connected as an independent wireless LAN.
T ER MINOLOGY 43 Ethernet – A popular local area da ta communications network, which accepts transmission from computers and ter minals. Ethernet operates on a 10 Mb ps baseband transmission rate, using shielded coaxi al cable or shielded twisted-p air telephone cable.
T ER MI NOLOGY 44.
.
38 T esla Irvine, CA 92618 Phone: (949) 679-8 000 FOR TECHNICAL SUPPOR T , CALL: From U.S.A. and Canada (2 4 hours a day , 7 days a week) (800) SMC-4-Y OU; (949) 679-80 00; Fax: (949) 67 9-1481 From Europe (8:00 AM - 5:30 PM UK T ime) 44 (0) 118 974 8700; Fa x: 44 (0) 118 974 8701 INTERNET E-mail addresses: techsupport@smc.
Ein wichtiger Punkt beim Kauf des Geräts SMC Networks SMC2632W (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie SMC Networks SMC2632W noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für SMC Networks SMC2632W - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von SMC Networks SMC2632W reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über SMC Networks SMC2632W erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon SMC Networks SMC2632W besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von SMC Networks SMC2632W verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit SMC Networks SMC2632W. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei SMC Networks SMC2632W gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
