Benutzeranleitung / Produktwartung 452 des Produzenten Smart Technologies
Zur Seite of 44
.
Guidelines for Rescue Services, smart, 2006 Guidelines for Rescue Ser vices smar t 2006.
Guidelines for Rescue Services, smart, 2006 Information and copyright Ordering workshop information All printed work shop information from GSP/TI can be ordered as follows: Within Germany : From our GSP/TI shop on the internet at the following link: http://gsptishop.
Contents Guidelines for Rescue Services, smart, 2006 Page 3 Preface 5 Overview Proper casualty rescue 6 Extinguishing vehicle fires 7 Rescue Securing and supporting 8 Removing the windows 10 Removing .
Page 4 Guidelines for Rescue Services, smart, 2006 Contents.
Preface Guidelines for Rescue Services, smart, 2006 Page 5 Dear reader, One of DaimlerChrysler's top prior ities has tradi tionally been to guaran tee the highest possible standards of safety.
Proper casualty rescue Page 6 Guidelines for Rescue Services, smart, 2006 Overview Whereas formerly priority was given to quickly rescuing the trapped casual ty from his predicament, the primary concern nowadays is medica l and psychological assistance.
Extinguishing vehicle fires Guidelines for Rescue Services, smart, 2006 Page 7 Overview Extinguish fir es in a ccordance with th e guidelines of the profe ssional fire services! Body: Magnesium is increasin gly being used in safety relevant reinforcement st ructures in the body.
Securing and supporting Page 8 Guidelines for Rescue Services, smart, 2006 Rescue On arrival at the scene of the accid ent, the first priority of the rescue crew should be to ascertain and assess the condition o f the casualties.
Securing and supporting Guidelines for Rescue Services, smart, 2006 Page 9 Rescue Vehicles lying on their side must be secured to prevent them from slidin g and tipping over, e.
Removing the windows Page 10 Guidelines for Rescue Services, smart, 2006 Rescue Windows in parts adjacent to tho se being worked on must always be removed before u sing hydraulic tools.
Removing the windows Guidelines for Rescue Services, smart, 2006 Page 11 Rescue Remove windows using a glass saw: The glass saw is usually the tool of choice for cutting out laminated glass windows: • First knock a hole in the window • Then remove the wind ow by cutting around th e edges P67.
Removing the windows Page 12 Guidelines for Rescue Services, smart, 2006 Rescue Glass roof on smart forfour (model 454) • Stick adhesive foil or tape over the window • Knock a hole in one of the c.
Removing the doors Guidelines for Rescue Services, smart, 2006 Page 13 Rescue First check whether the door catch can be opened in spite of the deformed door . It may be possible to open the door enough to allow the spreader to be pushed into the resulting gap.
Removing the doors Page 14 Guidelines for Rescue Services, smart, 2006 Rescue • If the plas tic cover panel on the door obstructs your efforts, you can g ive it a sharp tug by hand to remove it.
Removing the doors Guidelines for Rescue Services, smart, 2006 Page 15 Rescue smart forfour ( model 454) Opening on the hinge side • Remove door paneling (plastic panel) • Position the spreader between the hinge and the Apillar or fender • Spread the hinge until it breaks off P72.
Removing the doors Page 16 Guidelines for Rescue Services, smart, 2006 Rescue • Cut through the crossmember (3) (cut C) P72.00215900 3C r o s s m e m b e r • Cut the electrical lines • Insert the spreader from above and pull the door outwards P72.
Pushing away the instrument panel Guidelines for Rescue Services, smart, 2006 Page 17 Rescue a Risk of injury Action When vehicle parts are cut open or cut off , sharp edges are produced, which can cause inju ry to the casualties or to the rescue personnel .
Pushing away the instrument panel Page 18 Guidelines for Rescue Services, smart, 2006 Rescue • Crush t he rocker p ane l near the Apillars using the spreader P63.
Pushing away the instrument panel Guidelines for Rescue Services, smart, 2006 Page 19 Rescue As an alternative to placing a rescue ram in the door opening, a chain can be sl ung around the steering column below the steering wheel. A second chain is then slung around the fr ont axle from the front.
Pushing away the instrument panel Page 20 Guidelines for Rescue Services, smart, 2006 Rescue • Make a relief cut at th e bottom of the Apillar P62.00208900 • Position a rescue ram in the area of the joint (arrow) between the instrument panel crossmember and the Apillar.
Removing the roof Guidelines for Rescue Services, smart, 2006 Page 21 Rescue a Risk of injury Action When vehicle parts are cut open or cut off , sharp edges are produced, which can cause inju ry to the casualties or to the rescue personnel . Cover the relevant parts with protective covers or pillar padding.
Removing the roof Page 22 Guidelines for Rescue Services, smart, 2006 Rescue The smart fortwo coupé is fitted with an adhesive bonded roof in either glass or plastic. Because the glass roof con sists of sing lepane safety glass, the recommended pr ocedure is to cut out the entire roof structure as described in the following section.
Removing the roof Guidelines for Rescue Services, smart, 2006 Page 23 Rescue • Cut throug h the Cpillars below the gasfilled spring struts of the f olding rear windo w.
Removing the roof Page 24 Guidelines for Rescue Services, smart, 2006 Rescue • Cut through the Cpillars as far as the roof frame P65.00210800 • Cut through the roof frame P65.00210900 • Fold the roof back and se cure it to prevent it from springing back P65.
Removing the roof Guidelines for Rescue Services, smart, 2006 Page 25 Rescue Soft top/coupé roof on smart fo rtwo cabrio an d smart roadster smart fortwo cabrio (model 450) The smart cabrio is eq uipped with a fold ing top/rear soft top. It is locked and released auto matically wh en the switch is pressed.
Removing the roof Page 26 Guidelines for Rescue Services, smart, 2006 Rescue smart roadster/roadster coupé (model 452) The smart roadster and roadster coupé are equipped with a soft top or a coupé roof as s tan dard equipment.
Observing occupant restraint systems Guidelines for Rescue Services, smart, 2006 Page 27 Rescue a Risk of injury Action When disconnecting the batteries or when cutting electrical lines , the ground lines must always be disconnected or cut first, otherwise there is a risk of short circuit .
Observing occupant restraint systems Page 28 Guidelines for Rescue Services, smart, 2006 Rescue Occupant restraint system (SRS Supplemental Restraint System): All smart vehicles are equipped with seat belts and an additional occupant restraint system (SRS).
Observing occupant restraint systems Guidelines for Rescue Services, smart, 2006 Page 29 Rescue The sidebags (4) in all model series are located in the outsides of the backre sts (front seats only in the smart forfour).
Observing occupant restraint systems Page 30 Guidelines for Rescue Services, smart, 2006 Rescue The illustration at the si de shows the driver and front passenger airbags in their deployed and fully inflated state in the smart fortwo as an example. P91.
Observing occupant restraint systems Guidelines for Rescue Services, smart, 2006 Page 31 Rescue a Risk of injury Action If using safety devices intended to protect against airbag deployments after an .
Observing occupant restraint systems Page 32 Guidelines for Rescue Services, smart, 2006 Rescue The airbag's air sack infl ates within a few milli seconds during the collisi on. The air sack reaches its maximum volume in approximately 45 ms. Immediately after maximum volume is reached, the airbag starts to deflate.
Observing occupant restraint systems Guidelines for Rescue Services, smart, 2006 Page 33 Rescue Seat belts The seat belt buckles can usually be opened normally after a crash. However, it is of ten easier to cu t the belts at an easily accessible point.
Seat adjustment/head restraints Page 34 Guidelines for Rescue Services, smart, 2006 Rescue a Risk of injury Action When vehicle parts are cut open or cut off , sharp edges are produced, which can cause injury to the casualties or to the rescue personnel .
Steering wheel adjustment/roll bar Guidelines for Rescue Services, smart, 2006 Page 35 Rescue Steering wheel adjustment The height of the steering wheel can be adjusted according to requirements. •P r e s s t h e l o c k ( 1 ) d o w n w a r d s • Adjust the steering wheel • Press the lock (1) upwards P46.
General Page 36 Guidelines for Rescue Services, smart, 2006 Model classes Location of airbags: Location of battery: The airbags in the smart model series are located: • In the steering wheel (driver.
General Guidelines for Rescue Services, smart, 2006 Page 37 Model classes Location of structu ral reinforcements The structural reinforcements of relevance to rescue operations are all located in the region of the passenger cell .
smart fortwo Page 38 Guidelines for Rescue Services, smart, 2006 Model classes smart fortwo coupé (model 450.3) P00.00352600 1 Driver airb ag 2 Front passenger airbag 3 Sidebags (in the backrests) 4F u e l t a n k 5 Battery (in front passenger footwe ll) P00.
smart fortwo Guidelines for Rescue Services, smart, 2006 Page 39 Model classes smart fortwo cabrio (model 450.4) P00.00325800 1 Driver airbag 2 Front passenger airbag 3 Front sidebags (in the ba.
smart roadster Page 40 Guidelines for Rescue Services, smart, 2006 Model classes smart roadster/roadster coupé (model 452) P00.00353000 1 Driver airb ag 2 Front passenger airbag 3 Sidebags (in the backrests) 4F u e l t a n k 5 Battery (front luggage well) 6 Structural reinforcement of Apillars/ windshield frame P00.
smart forfour Guidelines for Rescue Services, smart, 2006 Page 41 Model classes smart forfour (model 454) P00.10390800 1 Driver airbag 2 Front passenger airbag 3 Front sidebags (in the backrests) 4 Windowbags 5 Fuel tank 6 Battery (left side of engine compartment) P00.
List of abbreviations Page 42 Guidelines for Rescue Services, smart, 2006 Annex ESG Singlepane safety glass ESP Electronic Stability Program LED Light emitting diode SRS Supplemental restraint syst.
Index Guidelines for Rescue Services, smart, 2006 Page 43 Annex A Airbags Driver airba g . . . . . . . . . . . . . . . . . . . 28 Front passenger airbag . . . . . . . . . . . . . 28 Gas generators . . . . . . . . . . . . . . . . . . 29 Location . . . .
Ein wichtiger Punkt beim Kauf des Geräts Smart Technologies 452 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Smart Technologies 452 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Smart Technologies 452 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Smart Technologies 452 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Smart Technologies 452 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Smart Technologies 452 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Smart Technologies 452 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Smart Technologies 452. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Smart Technologies 452 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
