Benutzeranleitung / Produktwartung 2273 Esteem II des Produzenten Singer
Zur Seite of 31
P U S H 2273 Instruction Manual.
When using an electrical appliance, basic safety should always be followed, including the following: Read all instructions before using this sewing machine. 1. An appliance should never be left unattended when plugged in. 2. Always unplug this appliance from the electric outlet immediately after using and before cleaning.
Congratulations As the owner of a new Singer sewing machine, you are about to begin an exciting adventure in creativity. From the moment you first use your machine, you will know you are sewing on one of the easiest to use sewing machines ever made.
Machine Basics Threading the Machine Sewing General Information Maintenance and Troubleshooting Principle Parts of the Machine.............................................................................................................................
1. Thread tension dial 2. Thread take-up lever 3. Thread cutter 4. Presser foot 5. Needle plate 6. Removable extension table/ accessory storage 7. Reverse sewing lever 8.
14. Horizontal spool pin 15. 16. Hole for second spool pin 17. Handwheel 18. Power and light switch 19. Main plug socket 20. Bobbin thread guide 21. Upper thread guide 22.
23 Connecting Machine to Power Source 4 Polarized attachment plug Conductor intended to be grounded Connect the machine to a power source as illustrated. (1) This appliance is equipped with a polarized plug which must be used with the appropriate polarized outlet.
Two Step Presser Foot Lifter 5 A When sewing several layers or thick fabrics, the presser foot can be raised for easy positioning of the work. (A) to a higher position.
6 Accessories Standard accessories (1) Optional accessories (2) a. All purpose foot b. Zipper foot c. Buttonhole foot d. Button sewing foot e. Seam ripper/ brush f. Edge/ quilting guide g. Pack of needles h. Spool holder i. Bobbin (3x) j. k. Oil bottle l.
7 Winding the Bobbin - corresponding . (1/2) - Snap thread into thread guide. (3) - Wind thread counterclockwise around bobbin winder tension discs. (4) - Thread bobbin as illustrated and place on spindle. (5) - Push bobbin spindle to right. (6) - Hold thread end.
8 12 6 3 4 5 a Inserting the Bobbin When inserting or removing the bobbin, the needle must be fully raised. Attention: - Remove the extension table, then open the hinged cover. (1) - Pull the bobbin case tab (a) and remove the bobbin case. (2) - Hold the bobbin case with one hand.
9 B A C D 12 Thread Tension Upper thread tension Lower thread tension Please note: Basic thread tension setting: "4" To increase the tension, turn the dial to the next number up. To reduce the tension, turn the dial to the next number down. A.
10 2 1 6 8 7 5 3 4 Threading the Upper Thread This is a simple operation but it is important to carry out correctly as by not doing so . - Start by raising the needle to its highest point (1), and continue turning the handwheel counterclockwise until the needle just slightly begins to descend.
11 Automatic needle threader - Raise the needle to its highest position. - Press lever (A) down as far as it will go. - The threader automatically swings to the threading position (B). - Pass thread around thread guide (C). - Pass the thread in front of the needle around the hook (D) from bottom to top.
12 1 2 3 Raising the Bobbin Thread Hold the upper thread with the left hand. Turn the handwheel (1) towards you (counterclockwise) lowering, then raising needle. If it is difficult to raise the bobbin thread, check to make sure the thread is not trapped by the hinged cover or the Removable Extension Table.
How to Choose Your Pattern 13 c d ab The diagram on this page display the stitch patterns available on the machine. Stitches in the top of the diagram are indicated on the Pattern Selector Dial in black. To select the patterns indicated with the black color, turn the Pattern Selector Dial.
14 Stitch Width Dial & Stitch Length Dial 1 2 Function of stitch width dial Function of stitch length dial while zig-zag stitching Function of stitch length dial for when straight stitching The maximum zigzag stitch width for zigzag stitching is 5mm; however, the width can be reduced on any patterns.
15 To begin sewing, set the machine for straight stitch. (1) Place the fabric under the presser foot with the fabric edge lined up with the desired seam guide line on the needle plate. (2) Lower the presser foot lifter, and then step on the foot controller to start sewing.
16 Removing the Work Cutting the Thread Reverse Sewing Turn the handwheel toward you (counterclockwise) to bring the thread take up lever to its highest position, raise the presser foot and remove work behind (2) the needle and presser foot. Pull the threads under and behind the presser foot.
17 Choosing Stretch Stitch Patterns 1 2 The Stretch Stitch Patterns are indicated with a blue color on the Stitch Length Dial to the indicator marked "S1". Though there are several stretch patterns, here are two examples: The machine sews two stitches forward and one stitch backwards.
18 Blind Hem 2 1 For hems on curtains, trousers, skirts, etc. Blind hem for stretch fabrics. Blind hem for firm fabrics. Set the Stitch Width Dial at a setting appropriate for the weight/type of fabric being sewn, within the range shown in the diagram on the right of the page.
19 Sew 1-step buttonholes 2 1 4 3 A D a b E B C Buttonhole sewing is a simple process that provides reliable results. However, it is strongly suggested to always make a practice buttonhole on a sample of your fabric and stabilizer. Making a Buttonhole Making a Buttonhole on Stretch Fabrics (E) 1.
20 Sewing on Buttons 4 3 1 2 Install the darning plate. (1) Change the all purpose foot to the button sewing foot. (2) Set the stitch length to "0". To sew a few securing stitches, set the machine for straight stitch, with the stitch width set at "0".
P U S H 1 2 Installing the Removable Extension Table 21 Hold the removable extension table horizontally, and push it in the direction of the arrow. (1) To remove the extension table, pull it toward the left. The inside of the removable extension table can be utilized as an accessory box.
12 3 4 a c d e f b b a e g Attaching the Presser Foot Shank 22 Raise the presser bar dge/ quilting dge/ quilting (a) with the presser foot lifter. Attach the presser foot shank (b) as illustrated. (1) Lower the presser foot shank (b) using the presser foot lifter, until the cut-out (c) is directly above the pin (d).
23 N Chart eedle/ Fabric/ Thread Heavy woolen, overcoat fabrics, upholstery fabrics, some leathers and vinyls. EXPLANATION Standard sharp needles. Sizes range thin to large. 9 (70) to 18 (110). Semi-ball point needle, scarfed. 9 (70) to 18 (110). Leather needles.
Darning Plate 24 For certain types of work, (e.g. darning or free-hand embroidery), the darning plate must be used. Install the darning plate as illustrated. For normal sewing, remove the darning plate. For free-motion sewing it is recommended to use a darning/embroidery foot, available as an optional accessory from SINGER retailers.
25 A C B A B C D 1 2 Inserting & Changing Needles Change the needle regularly, especially if it is showing signs of wear and causing problems. For best sewing results always use SINGER Brand Needles. Insert the needle A. Loosen the needle clamp screw and tighten again after inserting the new needle.
C Changing the Bulb 1 2 26 P U S H A B Disconnect the machine from the power supply by removing the plug from the main socket! Replace bulb with same type rated 10 watts (110-120V area) or 15 watts (220-240V area). - Loosen screw (A) as illustrated. (1) - Remove the face plate (B).
27 Troubleshooting Guide Problem Cause Correction Upper thread breaks Lower thread breaks Skipped stitches Needle breaks Loose stitches Seams gather or pucker Uneven stitches, uneven feed The machine is noisy The machine jams 1. The machine is not threaded correctly.
021K5B0101( ) May/08 SINGER 2273(K50B) Please note that on disposal, this product must be safely recycled in accordance with relevant National legislation relating to electrical/electronic products. If in doubt please contact your retailer for guidance.
Ein wichtiger Punkt beim Kauf des Geräts Singer 2273 Esteem II (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Singer 2273 Esteem II noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Singer 2273 Esteem II - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Singer 2273 Esteem II reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Singer 2273 Esteem II erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Singer 2273 Esteem II besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Singer 2273 Esteem II verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Singer 2273 Esteem II. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Singer 2273 Esteem II gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
