Benutzeranleitung / Produktwartung Citation 5900764 des Produzenten Simplicity
Zur Seite of 100
Parts Manual Rev. 9/2008 Citation Series Zero-Turn Riders & Mower Decks TP 400-7405-D-CI-S Mf g . No. Descri p tion 25HP Product 5900762 Citation, 25HP Kawasaki Zero Turn Rider w/52" Mower Mf g . No. Descri p tion 28HP Product 5900764 Citation, 28HP Briggs & Str atton Zero Turn Rider w/61" Mower 5101606 Part No.
.
Table Of Content s Torque Specification Chart .......... ........................ ............. ...................... Inside Back Cover PRODUCT COMPONENTS PAGES Main Frame & Fro nt Suspension Group ....... ...................................... .
Main Frame & Front Suspension Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301427 The above p arts group applies to th e following Mfg. Nos .: 4 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Main Frame & Front Suspension Group Footnotes SEAL, GREASE 1 5021072SM 2 SCREW, 5/16-18 X 1 FLAT HD SC 2 5025303SM 8 NUT, 5/16-18 HEX NYLON LOCK 3 5025057SM 8 WASHER, 3/8 FENDER (52" MO DEL USES QTY.
Rear Bumper Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287bmp1 The above p arts group applies to th e following Mfg. Nos .: 6 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Rear Bumper Group Footnotes MAIN FRAME 1- - HEAT SHIELD 2 5401174CSM 1 BUMPER 3 5403268CSM 1 PLATE, SEAT BELT ANCHOR - LH 4 5400844CSM 1 PLATE, SEAT BELT ANCHOR - RH .
Rear Bumper, Roll Bar & Seat Belt Group - 28 HP Briggs & Stratton Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart.
PART NO. DESCRIPTION REF NO. QTY. Rear Bumper, Roll Bar & Seat Belt Group - 28 HP Briggs & Stratton Models Footnotes PLUG, PANEL, 1.25 - BLACK 1 5023484SM 6 PLATE, HEAT SHIELD - ORG 2 540218 3.
Engine & PTO Group - 25HP Kawasaki NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301420 The above p arts group applies to th e following Mfg. Nos .: 10 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Engine & PTO Group - 25HP Kawasaki Footnotes ENGINE, 25HP Kawi, FH721-FS11-R 1- 1 SPACER, 1.13 X 1.75 X .32 2 5100062SM 1 KEY, 1/4 SQ. X 3-1/2" LONG 3 5050407X8S M 1 PULLEY, Crankshaft (Double A) 4 5047075SM 1 CLUTCH , 52 18-134 , Warne r 5 5100084SM 1 SPACER, .
Engine & PTO Group - 28 HP Briggs & Stratton Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301439 The above p arts group applies to th e following Mfg. Nos .: 12 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Engine & PTO Group - 28 HP Briggs & Stratton Models Footnotes ENGINE, 28HP, BRIGGS AND STRATTON 1- 1 BOLT, 5/16-18 X 1-3/4 GD5 YZ 2 5025011X14SM 4 ANCH OR, CLUT CH 3 5046416CSM 1 NUT, 5/16-18 HEX SERRATED FLANGE, LARGE 4 5025139SM 3 CLUTCH ANCHOR PAD 5 504363 6SM 1 WASHER, .
Instrument Control Panel Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301287 The above p arts group applies to th e following Mfg. Nos .: 14 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Instrument Control Panel Group Footnotes RING, SWITCH RETAINER 1 5022222SM 1 NUT, 3/8-24 HEX JAM (SV) 2 5025309SM 1 SWITCH, HEADLIGHT 3 1703799SM 1 SCREW, 1/4-20 X 1/2 ALLEN BH 4 5025299X4SM 3 WASHER, #10 SAE 5 5023499SM 4 SPACER, .
Pump Drive Gr oup NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301430 The above p arts group applies to th e following Mfg. Nos .: 16 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Pump Drive Gr oup Footnotes NUT, 3/8-16 HEX SERRATED FLANGE 1 5025128SM 4 KEY, 5MM SQ. W/ RADIUS 2 5023254SM 2 BOLT, 1/4-20 X 1, GD5 3 5025010X8SM 4 BOLT, 3/8-16 X 1-1/4 " GD5 4 5025013X10SM 4 NUT, 3/8-16 HEX NYLOCK FLANGE 5 5025394SM 3 BELT,#41-1299, BANDED -EL 64.
Motion Control Group - 28 HP Briggs & Stratton Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301431 The above p arts group applies to th e following Mfg. Nos .: 18 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Motion Control Group - 28 HP Briggs & Stratton Models Footnotes WASHER, 3/8 SAE 1 5025156SM 6 BOLT, 3/8-16 X 1 GD5 YZ 2 5025013X8SM 2 NUT, 3/8-16 HEX NYLOCK FLANG.
Motion Control Group - 28 HP Briggs & Stratton Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301431 The above p arts group applies to th e following Mfg. Nos .: 20 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Motion Control Group - 28 HP Briggs & Stratton Models Footnotes WASHER, 3/8 X 1" X 1/16, NYLON F/W 45 5025424SM 2 NUT, 5/16-18 HEX NYLOCK FLANGE 46 5025392SM 8 DAMPENER, CONTROL,#(P6709/P3610) 47 5100940SM 2 The above p arts group applies to th e following Mfg.
Motion Control Group - S/N: 201317251 & Above NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301479 The above p arts group applies to th e following Mfg. Nos .: 22 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Motion Control Group - S/N: 201317251 & Above Footnotes ROD, NEUTRAL RETURN 1 5100947SM 2 SPRING, REVERSE RETURN 2 5022645SM 2 BUSHING, NYLON 3 5023260SM 2 BUSHING, FLANGED .375 X .630 X 2.00 4 5100942SM 2 COLLAR, 3/8" SET 5 5010546SM 4 WASHER, 3/8 SAE 6 5025156SM 12 PIN, HA IR, .
Motion Control Group - S/N: 201317251 & Above NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301479 The above p arts group applies to th e following Mfg. Nos .: 24 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Motion Control Group - S/N: 201317251 & Above Footnotes WELD, SHAFT MOTION CONTROL-LH-IS 500-ORG 45 5402588CSM 1 The above p arts group applies to th e following Mfg. Nos .: 25 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Hydraulic Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287hyd0 The above p arts group applies to th e following Mfg. Nos .: 26 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Hydraulic Group Footnotes CAP, Hy drau lic Oi l Onl y 1 5100017SM 1 HYDRAULIC OIL RESERVOIR, Complete 2 5061712SM 1 FITTING, Elbow, 3/8" 3 5023118SM 1 GROMMET 4 1726400SM 1 GROMMET 5 5023121SM 1 FITTING, Elbow, 5/8" 6 5023119SM 1 CLAMP, #10 Hose 7 5021164SM 2 HOSE, Hydraulic, 24.
Hydraulic Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287hyd0 The above p arts group applies to th e following Mfg. Nos .: 28 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Hydraulic Group Footnotes FAN SHROUD (S/N: 2012607200 & ABOVE) 39 5100162SM 1 The above p arts group applies to th e following Mfg. Nos .: 29 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
Hydraulic Group - 28 HP Briggs & Stratton Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301275 The above p arts group applies to th e following Mfg. Nos .: 30 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Hydraulic Group - 28 HP Briggs & Stratton Models Footnotes ADAPTER, HYD. 1 5022634SM 2 FITTING, #8 JIC - #8 O-RING, 45 DEG.
Hydraulic Mount Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287hyt0 The above p arts group applies to th e following Mfg. Nos .: 32 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Hydraulic Mount Group Footnotes MAIN FRAME 1- - NUT, 1/4-20 HEX NYLOCK FLANGE 2 5025391SM 4 CLAMP, VINYL, 1" 3 5023173SM 1 BOLT, 3/8-16 X 1-1/4 " 4 502501 3.
Hydraulic Mount Group - 28 HP Briggs & Stratton Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301437 The above p arts group applies to th e following Mfg. Nos .: 34 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Hydraulic Mount Group - 28 HP Briggs & Stratton Models Footnotes TANK, HYDRAULIC, ASSEMBLY (See Hydraulic Group) 1- 1 BOLT, 3/8-1 6 X 1-1/2 GD5 YZ 2 5025013X12SM .
Electrical Group - 25HP Kawasaki NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301422 The above p arts group applies to th e following Mfg. Nos .: 36 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Electrical Group - 25HP Kawasaki Footnotes SWITCH , Igni tion , Comp let e 1 5020927SM 1 KEY, Ignition Molded 2 502278 9SM 1 COVER 3 5022790SM 1 PLASTIC NUT 4 5022791SM 1 SWITCH , PTO 5 5022180SM 1 HOUR METE R 6 5100996SM 1 HEADLIGHT SWITCH 7 1703799SM 1 NUT, #10-24 Hex Nylon Lock 8 5025271SM 2 SPACER, .
Electrical Grou p - 28 HP Briggs & Stratton NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301288 The above p arts group applies to th e following Mfg. Nos .: 38 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Electrical Grou p - 28 HP Briggs & Stratton Footnotes SWITCH , Igni tion , Comp let e 1 5020927SM 1 KEY, Ignition Molded 2 502278 9SM 1 COVER 3 5022790SM 1 PLASTI.
Seat, Mount & Fl oor Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287stm0 The above p arts group applies to th e following Mfg. Nos .: 40 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Seat, Mount & Fl oor Group Footnotes MAIN FRAME 1- - BOLT, 5/16 -18 X 1 2 5025011X8SM 4 WASHER 5/16" Gr. 9 Flat 3 5025292SM 4 NUT, 5/16-18 Hex Nylock Flange .
Seat, Mount & Fl oor Group - 28 HP Briggs & Stratton Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301429 The above p arts group applies to th e following Mfg. Nos .: 42 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Seat, Mount & Fl oor Group - 28 HP Briggs & Stratton Models Footnotes MAIN FRAME 1- - BOLT, 5/16 -18 X 1 GD5 YZ 2 502501 1X8SM 8 WASHER, 5/16 SAE 3 5025155SM .
Fuel Supply Hose Group & Tank Replacement Parts G roup NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287fsh0 The above p arts group applies to th e following Mfg. Nos .: 44 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Fuel Supply Hose Group & Tank Replacement Parts G roup Footnotes CLAMP, HOSE, EXTERNAL, 1/2 - RED 1 5020835SM 2 HOSE, 1/4" FUEL, 16.
Fuel Tank & Mount Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287tnk0 The above p arts group applies to th e following Mfg. Nos .: 46 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Fuel Tank & Mount Group Footnotes MAIN FRAME 1- - SCREW, Allen Head, #10-24 x 3/8" 2 5025386SM 6 MOUNT, TAN K, FRONT 3 5400012CSM 2 BOLT, 3/8-1 6 X 1" G.
Fuel Tank & Mount Group - 28 HP Briggs & Stratton Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301435 The above p arts group applies to th e following Mfg. Nos .: 48 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Fuel Tank & Mount Group - 28 HP Briggs & Stratton Models Footnotes TANK, FUEL, 15 00Z - LH 1 5049947SM 1 TANK, FENDER, 1500Z - RH 2 5049948SM 1 FUEL CAP, 3.
Parking Brake Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287pbr0 The above p arts group applies to th e following Mfg. Nos .: 50 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Parking Brake Group Footnotes MAIN FRAME 1- - MOTOR MOUNT 2- - BOLT, 5/16-18 X 3/4 12PT FLANGE - PATCH 3 5023490SM 8 WASHER, 1 x 2 4 5023249SM 2 BOLT , 3 /8- 16 X 3/4.
Parking Brake Group - 28 HP Briggs & Stratton Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301432 The above p arts group applies to th e following Mfg. Nos .: 52 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Parking Brake Group - 28 HP Briggs & Stratton Models Footnotes WELD, BRAKE SHAFT - ORG 1 5403948CSM 1 GROMMET, 1-1/4 2 5021397SM 2 BOLT, 5/16-18 X 3/4 12PT FLANGE.
Rear Suspension Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287susr0 The above p arts group applies to th e following Mfg. Nos .: 54 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Rear Suspension Group Footnotes MAIN FRAME 1- - BOLT, 1/2-13 X 6-1/2 " 2 502501 7X52SM 2 WASHER, 1/2" SAE 3 5025158SM 10 SHOCK ASSEMBLY 4 5023436SM 2 BOLT, 3/8-16 X 1-1/4 " 5 502501 3X10SM 12 WASHER, 3/8" GR.
Rear Suspension Group - 28 HP Briggs & Stratton Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301433 The above p arts group applies to th e following Mfg. Nos .: 56 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Rear Suspension Group - 28 HP Briggs & Stratton Models Footnotes BUSHING, FLANGE 1 5021541SM 4 WELD, TIE BAR - ORG 2 5404051CSM 1 SPACER, .
Deck Lift Group - 28 HP Briggs & Stratton Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301434 The above p arts group applies to th e following Mfg. Nos .: 58 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Deck Lift Group - 28 HP Briggs & Stratton Models Footnotes NUT, 3/8-16 HEX NYLOCK FLANGE 1 5025394SM 4 PIN, CLEVIS, 1/4 X 1/2 2 5025212X4SM 1 BUSHING, 1.
Deck Lift Group - 28 HP Briggs & Stratton Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301434 The above p arts group applies to th e following Mfg. Nos .: 60 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Deck Lift Group - 28 HP Briggs & Stratton Models Footnotes COLLAR, 3/4 SPLIT 45 5010114SM 2 BOLT, 3/8-16 X 1 GD5 YZ 46 5025013X8SM 4 BOLT, 1/2-2 0 X 1-3/4 GD5 YZ 47 502501 8X14SM 8 WELD, DECK LIFT SHAF T - ORG 48 5403949CSM 1 The above p arts group applies to th e following Mfg.
Deck Lift Group - S/N: 2013202961 & Below NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287dlt0 The above p arts group applies to th e following Mfg. Nos .: 62 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Deck Lift Group - S/N: 2013202961 & Below Footnotes MAIN FRAME 1- - MOTOR MOUNT 2- - HITCH PIN, 1 /2 X 2 " 3 5023498SM 1 BOLT, 3/8-16 X 1-1/4 " 4 502501 3X10SM 6 WASHER, 3/8 GR.
Deck Lift Group - S/N: 2013202961 & Below NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287dlt0 The above p arts group applies to th e following Mfg. Nos .: 64 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Deck Lift Group - S/N: 2013202961 & Below Footnotes DECK LIFT ROD 45 5049848SM 2 DECK LIFT PIVOT, LH (S/N: 2000484318 - 2013202961) 46 5402814CSM 1 DECK LIFT PIVO.
Deck Lift Group - S/N: 2013202962 & Above NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287dlt1 The above p arts group applies to th e following Mfg. Nos .: 66 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Deck Lift Group - S/N: 2013202962 & Above Footnotes MAIN FRAME 1- - MOTOR MOUNT 2- - HITCH PIN, 1 /2 X 2 " 3 5023498SM 1 BOLT, 3/8-16 X 1-1/4 " 4 502501 3X10SM 6 WASHER, 3/8 GR.
Deck Lift Group - S/N: 2013202962 & Above NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287dlt1 The above p arts group applies to th e following Mfg. Nos .: 68 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Deck Lift Group - S/N: 2013202962 & Above Footnotes DECK LIFT ROD 45 5049848SM 2 DECK LIFT PIVOT, RH 46 5402815CS M 1 DECK LIFT PI VOT, LH 46 5402814CSM 1 REAR DE.
Wheel & Tire Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301279 The above p arts group applies to th e following Mfg. Nos .: 70 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Wheel & Tire Group Footnotes TIRE, CASTER, 13 X 5.00-6 1 5022631SSM 2 TIRE, CASTER, 13 X 5.00-6 (Includ es Ref No. 2 - 7 & 15) 1 5022631SSM 2 * FLAT-FREE TIRE ASSEMBLY, 13 x 5.0 - 6 1 5023280SM 2 TIRE, 13 x 5.
Decals - Brand & Model NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 287dclb The above p arts group applies to th e following Mfg. Nos .: 72 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Decals - Brand & Model Footnotes DECAL, Simplicity Logo (Qty: 1 on models w/ carb guard only) 1 1722551SM 1 DECAL, Citati on 2 5061821SM 1 DECAL, Ba dge, RH 3 506.
Decals - Safety & Operation NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301487 The above p arts group applies to th e following Mfg. Nos .: 74 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Decals - Safety & Operation Footnotes DECAL, MAIN 1 5100710SM 1 DECAL, DANGER, MOWER DISCHAR GE 2 5100137SM 1 DECA L, DA NGE R, MO WER 3 510013 6SM 1 DECAL, CZT H.
Spindle Serv ice Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. SPINDLE The above p arts group applies to th e following Mfg. Nos .: 76 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. Spindle Serv ice Group Footnotes ASSM, SPINDLE, LOW PROFILE (SV) (Includes Ref No. 2 - 10) 1 5061095SM 3 GREASE FITT ING (SV) 2 5023329SM 3 NUT, 3/4-16 HEX (SV) 3 502.
48" & 52" Mower D eck - Hanger Chains NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 2875ch0 The above p arts group applies to th e following Mfg. Nos .: 78 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. 48" & 52" Mower D eck - Hanger Chains Footnotes MOW ER DEC K 1- - NUT, 1/2-13 HEX 2 502503 8SM 2 NUT, 1/2-13 HEX NYLOCK FLANGE 3 5025396SM 2 WASHER, 1/2.
48" & 52" Mower Deck - Ho usin g, Cover, Spindle & Blade NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 2875hc0 The above p arts group applies to th e following Mfg. Nos .: 80 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. 48" & 52" Mower Deck - Ho usin g, Cover, Spindle & Blade Footnotes WASHER, 5/16" SAE 1 5025155SM 8 BODY CLIP, 5/16-18 2 5022308SM 6 BOLT, 5/16 .
48" & 52" Mower Deck - Pu l leys, Belts & Idler Arm NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 2875pb0 The above p arts group applies to th e following Mfg. Nos .: 82 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. 48" & 52" Mower Deck - Pu l leys, Belts & Idler Arm Footnotes MOW ER DEC K 1- - NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) 2 1931277SM 2 KEY, 1/4 SQ.
48" & 52" Mower Deck - Ro llers NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 2875rl0 The above p arts group applies to th e following Mfg. Nos .: 84 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. 48" & 52" Mower Deck - Ro llers Footnotes WASHER 3/8" SAE 1 5025156SM 2 NUT, 3/8-16 Hex Nylock Flange 2 5025394SM 4 SPACER, .
61" Mower Deck - Hanger Chains NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301280 The above p arts group applies to th e following Mfg. Nos .: 86 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. 61" Mower Deck - Hanger Chains Footnotes CHAIN, 5/16 GD30, 3 LINKS 1 5050878X3SM 2 HANGER, FRONT DECK - 2 LINK 2 5047503SM 2 BOLT, 3/8-16 X 1-3/4 GD5 3 5025013X1.
61" Mower Deck - Housing, Cove rs, Spindles & Blades Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301436 The above p arts group applies to th e following Mfg. Nos .: 88 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. 61" Mower Deck - Housing, Cove rs, Spindles & Blades Group Footnotes DECK SHELL W/DECALS, 61" SIDE DISCHARGE (Includes Safety Decals) 1 5600183SM 1 61&q.
61" Mower Deck - Pulleys, Belts & Idler Arm NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301438 The above p arts group applies to th e following Mfg. Nos .: 90 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. 61" Mower Deck - Pulleys, Belts & Idler Arm Footnotes BEL T, #7-4 918 1 5022061SM 1 BOLT, 1/2-13 X 4-1/2 GD5 2 5025017X36SM 1 WASHER, 1/2 USS 3 5025150SM 2 SPACER, .
61" Mower Deck - Rollers & Casters NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301285 The above p arts group applies to th e following Mfg. Nos .: 92 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. 61" Mower Deck - Rollers & Casters Footnotes WHEEL- 2.00 WIDE 3.92 DIA 0.531ID POLY 1 1714760SM 6 WASHER, 1/2 GD9 YZ 2 5025440SM 6 SPACER, .38 X .50 X 5.06 3 5046586SM 2 NUT, 3/8-16 HEX NYLOCK FLANGE 4 5025394SM 4 BOLT, 3/8-1 6 X 3-1/2 GD5 YZ 5 5025013X28SM 2 WASHER, 3/8 SAE 6 5025156SM 4 SPACER, .
61" Mower Deck - Striping Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 5301444 The above p arts group applies to th e following Mfg. Nos .: 94 2008 Copyright © by Briggs and Stratt on Corporation Briggs and Stratton Yard Power Products Group Milwaukee, WI, USA.
PART NO. DESCRIPTION REF NO. QTY. 61" Mower Deck - Striping Roller Bar Footnotes WELD, ROLLER MT, COBALT - RH 1 5401299CSM 1 WELD, ROLLER MT, COBALT - LH 2 5401298CSM 1 WELD, ROLLER SLIDE 3 54013.
Notes.
Notes.
.
T or que Specification Char t FOR ST ANDARD MACHINE HARDW ARE (T olerance ± 20%) Hardware Grade SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.
500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA www.simplicitymfg.com MANUFACTURING, IN C. 2008 Copyright © by Briggs and Str atton Corporation Briggs and Stratton Yard Power Prod ucts Group Milwaukee, WI, USA.
Ein wichtiger Punkt beim Kauf des Geräts Simplicity Citation 5900764 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Simplicity Citation 5900764 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Simplicity Citation 5900764 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Simplicity Citation 5900764 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Simplicity Citation 5900764 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Simplicity Citation 5900764 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Simplicity Citation 5900764 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Simplicity Citation 5900764. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Simplicity Citation 5900764 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
