Benutzeranleitung / Produktwartung MVDS X-1 des Produzenten Silex technology
Zur Seite of 76
Multicast V ideo D istribution S y stem MVDS X -1 Installation / U ser's Guide.
.
- Cop ying all or a par t of this manual without our per mission is prohibited . - The cont ents of this manual may be changed without advance notic e. - Please note that the ac tual scr eens may var y from the examples in this manual. This can be caused by di erent versions of operating sy stems on the PC, upgrades , etc.
.
Index Pr oduc t O verview ..................................................... 1 1.1 About this product ........................................................................................ 2 1.2 Specication ....................................
Monitor and Maintenanc e ..................................... 33 3.1 F ront panel..................................................................................................... 34 3.1.1 Menu structure and how to use it .........................
1.Pr oduc t Over view 1 P roduc t O v er view 1.
2 MVDS X -1 User's Guide 1.1 About this pr oduc t MVDS stands for "Multicast Video Distribution Syst em" , which allows to distribute video or audio data from P layer (e.g . PC, DVD play er , etc) to Display (e .g. T V , Monitor , etc) by IP Multicast.
1.Pr oduc t Over view 3 F eature V ideo and Audio c ontrol - Adopts J P E G 2 0 0 0 c o d e c . H i g h c o m p r e s s i o n w i t h l e s s i m a g e d e g r a d a t i o n a v a i l a b l e - Audio .
4 MVDS X -1 User's Guide 1.2.1 Hardw are specication Hardwar e specication is as follow s: CPU T OSHIBA T X4939 400MHz (32/64bit MIPS) RAM 128MB DDR ROM 8MB Inter face Video Analog RGB D-SU.
1.Pr oduc t Over view 5 This device complies with Part 15 of the FC C Rules. Operation is subject to the follo wing two conditions: (1) This device may not cause harmful inter ference , and (2) this device must accept any inter ferenc e received , including inter ference that may cause undesir ed operation.
6 MVDS X -1 User's Guide 1.2.2 Sof t war e specication Soft ware specication is as f ollows: Pr otocol T CP/IP Network Layer ARP , RARP , IPv4 , ICMP Multicast : IPv4 Organization Local Scope 239.
1.Pr oduc t Over view 7 1.2.3 Inter face specication Inter face specication is as follo ws: Video Inter face Analog RGB (15pin Dsub) Codec JPEG2000 Resolution 1280 x 768 pixel ( WXGA ) Flame ra .
8 MVDS X -1 User's Guide 1.2.4 Notes on the r adio wav e Do not use this product near the following equipment or plac es. - Microwav e, scientic instruments , pacemaker or other medical equipment. - Licensed radio station in a factory . - Small power r adio station (a non-licensed radio station).
1.Pr oduc t Over view 9 1.3 Net w ork composition A MVDS net work is composed of one MVDS transmitter and 32 MVDS receiv ers (at maximum). I n each group , a video or audio data are distributed in multicast (or unicast). As for network inter face , both Wired and Wir eless LAN por ts are suppor ted.
10 MVDS X -1 User's Guide Wir eless system - Network composition f or Ad-Hoc mode The player (e.g. PC or DVD player , etc .) outputs data (e.g. video, audio , ser ial data, etc.) to MVDS transmitter . The transmitter captures and sends them to the MVDS receiv ers being connected to the transmitter in A dhoc mode.
1.Pr oduc t Over view 11 Network composition for wir ed/wireless connection mix If the wired/wireless system are mixed, you can suppor t wider variet y of envir onment.
12 MVDS X -1 User's Guide 1.4 P ar ts and func tion The name of each part and the func tion are explained below: F ront T ransmitter Push button Description MENU Go into L CD menu from initial screen. Return to initial screen from L CD top menu. Go back to higher level in L CD menu.
1.Pr oduc t Over view 13 LED (both T ransmitter and Receiver) LED Description POWER OFF: P owered o or being on boot process . ON: P owered on (Normal status) ST A TUS Blink: Blink ever y time when codec of 1 frame data is complete . ON: F ac tor y default conguration using push buttons is c omplete.
14 MVDS X -1 User's Guide Back Both T ransmitter and Receiv er P ar t Description DCIN 15V1A AC connector (15V 1A) * In case of X-1ER, A C power can be supplied via internal DC connector . ETHER Ethernet interface (RJ45) RS232C Serial inter face (9pin Male) A UDIO Audio interface (3.
2.Installation 15 Installation 2.
16 MVDS X -1 User's Guide This sec tion explains the necessar y ac tions that should be taken befor e you connect and setup this product. 2.1 Bef ore y ou begin 2.1.1 Necessar y items Please prepar e the following it ems. MVDS T ransmitter ( X-1T ) One transmitter is requir ed.
2.Installation 17 2.1.2 Cr eate en vironmen t for setup The rst step is to connect the cables to the MVDS transmitter and receiver , and to the player , monitor(s) and PC. All the conguration can be per formed via a wired LAN network. 1. C onnec t the LAN cables Connect the MVDS transmitter and r eceiver(s) to the PC using LAN cables .
18 MVDS X -1 User's Guide <Connection example> An example MVDS installation is shown belo w : T ransmitter Receiver Player Displa y PC LAN Cable Audio Cable Audio Cable VGA Cable VGA Cable.
2.Installation 19 2.2 C ongure this pr oduc t 2.2.1 Assig n IP address When the cable connec tions and pow er on are completed , congure the net work settings and adjust the screen images f or the MVDS transmitter and rec eivers.
20 MVDS X -1 User's Guide 3. Selec t the MVDS transmitter or receiver that you wish to congure . F rom the top menu, click C onguration - Set IP address . 4. Congur e a unique IP address that is not used by other network devices. (Example: 10.
2.Installation 21 2.2.2 C ongure via W eb brow ser After you have assigned the IP address for each MVDS transmitter and receiv er , you can congure these devices using a PC with any standard web browser . F or each MVDS transmitter and receiv er , access the W eb page using the IP address you have congured into the device.
22 MVDS X -1 User's Guide Host name / P asswor d conguration Congur e Host Name and Passw ord. TIP - Be sure to set a passwor d, especially if you are using the MVDS with a public network. In fac tor y default, the last six hexadecimal digits of the Ethernet MA C address is used as the host name of the MVDS transmitter and receiv er(s).
2.Installation 23 Network conguration Congur e the IP address and wireless settings. Selec t N e t w o r k under C onguration in the W eb page. * Required f or both T ransmitter and Rec eivers TIP - The MVDS transmitter and receivers operate without the need to manually congure an IP address as they supports Auto IP function.
24 MVDS X -1 User's Guide Example: The following are the sample settings to use this product in AdHoc mode. T ransmitter Receiver Inter face Enable Enable Mode AdHoc A dHoc SSID Optional Optional (same as T ransmitter) Ch.
2.Installation 25 Adjusting a scr een image (at transmitter) Connect to the web page of the transmitter to adjust a screen image appropriate for the pla yer . If you ar e sure of what value t o set for screen image , click V ideo/A udio/Data und er C onguration and congure each setting.
26 MVDS X -1 User's Guide 5. Click Video/A udio/Data under C onguration and adjust the settings such as PHASE_C C, etc. to make the image quality better .
2.Installation 27 Adjusting a scr een image (at rec eiver(s)) TIP - Y ou normally do not have to adjust a screen image at the receivers since the monitor will automatically make adjustments . If adjustment is necessar y , go to the W eb page of the transmitter .
28 MVDS X -1 User's Guide 2.3.1 C onnec t to a wired network 2.3 Har dwar e installation Ethernet HUB T ransmitter LAN Cable LAN Cable LAN Cable LAN Cable LAN Cable Player Receiver Display Receiv.
2.Installation 29 2.3.2 C onnec t to a wireless network Below is a sample connection to install this product outdoors. Selec t the antenna according to y our location status, distance fr om the receiv er or lay out.
30 MVDS X -1 User's Guide V er tical con ver gence angle and minimum distance Every 'high- gain' antenna has ver tical and horizontal selec tiveness .
2.Installation 31 V er tical co verage and Line - of-sight F rom a ver tical con vergence point of view , less height dierence is better to minimize distance problems.
32 MVDS X -1 User's Guide.
3.Monitor and Maintenance 33 Monitor and Maint enanc e 3.
34 MVDS X -1 User's Guide The L CD menu has the structure below . "Level 0-3" at the top of this diagram indicate the hierar chy level . The MVDS transmitter has a L CD which provides the operating status and conguration f or transmitters .
3.Monitor and Maintenance 35 Each menu can be switched by pushing the push buttons to the r ight of L CD . T o switch the menu levels, use [ MENU ] and [ SET ] buttons. T o switch the options in the same level , use [ + ] and [ - ] buttons. The menu transition diagr am is as below .
36 MVDS X -1 User's Guide This scr een is alway s display ed while this product is turned on. When this product is running properly , the model name and operating status ar e shown in the upper line and lower line respectively .
3.Monitor and Maintenance 37 Shows the service status for each data tr ansfer . SER VICE A C TIVIT Y SERVICE AC TIVIT Y (sample) SERVICE:VIDEO ACTIVE 1280x768 Selec ted menu Curr ent status of the selec ted menu Menu options and status Menu Description Status Denition VIDEO Displays a service status for video data transfer.
38 MVDS X -1 User's Guide Shows a network status . C ONNEC TION ST A T C ONNEC TION ST A T (sample) C ONN:E THERNE T LINK 100Mb/F ull Selec ted menu Curr ent status of the selec ted menu Menu options and status Menu Description Status Denition ETHERNE T Show the Ethernet link status.
3.Monitor and Maintenance 39 DEVICE INFO Shows the devic e information. DEVICE INFO (sample) DEV:HOST NAME T X012345 Selec ted menu Curr ent status of the selec ted menu Menu options and status Menu Information displayed in the lo wer line HOST NAME Show the host name.
40 MVDS X -1 User's Guide ADMIN MODE MENU P ar t of settings can be congured, ref erred and maintained through ADMIN MODE MENU . This menu has a hierarchic structure below .
3.Monitor and Maintenance 41 T o enter into LEVEL2 in ADMIN MODE MENU , the PIN CODE is requir ed (In the factor y default setting, the PIN C ODE is "0000").
42 MVDS X -1 User's Guide WIRELESS C ONFIG Shows or Changes the wir eless LAN settings. WIRELESS C ONFIG (sample) WIRELESS I/F ENABLE Selec ted menu Curr ent setting of the selec ted menu Menu Information WIRElESS I/F Displays whether the wireless LAN setting is enabled or disabled .
3.Monitor and Maintenance 43 VIDEO C ONFIG Shows or C ongures the video settings. VIDEO C ONFIG (sample) CAPTURE GAIN * R 128 G 128 B 128 Selec ted menu Curr ent setting of the selec ted menu Menu Information A UTO C ONFIG Starts the auto-adjustment for image parameters.
44 MVDS X -1 User's Guide Menu Information CAPTURE GAIN Displays or Congur es the Gain value (R/G/B). Y ou can switch to the conguration screen b y pushing [ SET ] button. CAPTURE GAIN * R 128 G 128 B 128 s Enter a value . Set the value in the order of R -> G -> B .
3.Monitor and Maintenance 45 SERIAL C ONFIG Shows the serial settings . Menu Information BA UD RA TE (bps) Displa ys a baudrate. BIT LENGTH Displays a bit length. ST OP BIT Displays a st op bit. P ARIT Y Displays a parity bit. FL OW CONTROL Displays a ow c ontrol setting.
46 MVDS X -1 User's Guide 3.2 W eb inter face C ongure using a W eb brow ser Since this product implements HT TP protocol , advanced settings for this product can be congured or changed using a W eb browser . Also, a con venient func tion such as a remote r eboot is available .
3.Monitor and Maintenance 47 C ongure from the W eb page Click the menu item that you wish to congure . When the screen below is display ed, type a user name (root) and password , then click OK . In the fac tor y default settings, no passw ord is set.
48 MVDS X -1 User's Guide Displays gener al status for each audio , video and serial por t. General 3.2.1 Status Operating status f or each audio , video and serial por t is display ed. Name Details Ser vices Video Display a transf er status for video data.
3.Monitor and Maintenance 49 Displays curr ent network status (IP Address and wir eless). Name Details Ethernet Status IP Address Display an IP address. Subnet Mask Display a subnet mask. Default Gateway Display a default gatewa y address. Link Status Display a link status.
50 MVDS X -1 User's Guide Displays sta tus for each audio , video and serial por t. Name Details Video Status Resolution Display a capture r esolution. F rame size (byte) Display a data size of the last fr ame. Inter val (ms) Display a capture interval.
3.Monitor and Maintenance 51 3.2.2 C onguration Common settings for T ransmitter and R eceivers . Congure a host name and passwor d. Congur e the network settings and transmission conditions for audio, video and serial por t. Click the item that you wish to congure .
52 MVDS X -1 User's Guide Congur es the net work settings . Network.
3.Monitor and Maintenance 53 Name Details Ethernet Conguration DHCP/BOO TP Enable/Disable a DHCP function. IP Address Set an IP Address. Subnet Mask Set a Subnet Mask . Default Gateway Set a Default Gateway . Wir eless Conguration Wir eless I nterface Enable/Disable the wireless.
54 MVDS X -1 User's Guide Congur es the video signal parameters, serial port and buer size of transmitt er . V ideo/Audio/Data (at tr ansmitter).
3.Monitor and Maintenance 55 Name Details Video Conguration Capture Timing Vertical frequency / (1+x) = FPS Example: 60[Hz]/(1+[capture timing]2)= 20[fps] Gain R Adjust a r ed gain. Gain G Adjust a green gain. Gain B A djust a blue gain. F ilter R Adjust a red lt er .
56 MVDS X -1 User's Guide Name Details Video Conguration H.P osition O set Displays the oset v alue for H.Position setting tha t you may have c ongured from L CD menu. This value is added to H.P osition setting and then take eect in the video image.
3.Monitor and Maintenance 57 Congur es the video signal parameters, serial port and buer size of r eceivers. V ideo/Audio/Data (at r eceiver).
58 MVDS X -1 User's Guide Name Details Video Conguration H Width Specify a width of horizontal synchronization sig nal by dot clock. H P eriod Specify a period for horizontal synchronization b y dot clock . H Back P orch Specify the Back Porch of horizontal synchronization signal by dot clock.
3.Monitor and Maintenance 59 Congur es Static Node contr ol of transmitter . Usually , the default settings are used . Static Node (at tr ansmitter) Name Details Node Conguration Node List Method Specify a node search method. Static Node 0 Specify an IP address for node when Node List M ethod is set to Static.
60 MVDS X -1 User's Guide Congur es Static Node control f or receiv ers. Usually , the default settings are used . Static Node (at r eceiver) Name Details Node Conguration Node List Method Specify a node search method.
3.Monitor and Maintenance 61 Congur es D ynamic Node control f or transmitter . Show s the list and status of r eceiv ers connected t o a par ticular g roup an d changes the transmission method. Dynamic Node (at transmitter) Name Details Node Conguration Dynamic Coordinators Display a list of the discover ed groups .
62 MVDS X -1 User's Guide Congur es D ynamic Node control f or receiv ers. Shows or Changes which tr ansmitter the receiv ers should connec t to . Dynamic Node (at receiv er) Name Details Node Conguration Dynamic Coor dinators Display the list of discover ed groups.
3.Monitor and Maintenance 63 Reboots, resets and upda tes the rmwar e of this product. 3.2.3 T ools Common P er forms reboot, factor y default conguration and rm ware update . Click the button of item that y ou wish to ex ecute. Name Details Reset menu Reboot Reboot this product.
64 MVDS X -1 User's Guide Adjusts the screen image for transmitter and changes the maintenance screen to be display ed for receiv ers. The screen curr ently being captured can be applied as a maintenanc e screen. V ideo/Audio (at transmitt er) Name Details Manage custom screen Refresh Refreshes the W eb page.
3.Monitor and Maintenance 65 Changes the star tup screen and stop sig nal screen for r eceivers. The screen currently being output to monitors from receiv ers can be captured and then applied as star tup screen and/or stop sig nal screen of receiv er .
66 MVDS X -1 User's Guide.
Appendix A-1 Appendix A.
A-2 MVDS X -1 User's Guide A-1 C onguration it em list The below is the list of c onguration item: Par ameter name Descr iption V alue range Default value T X R X Host Name S et a host name.
Appendix A-3 Par ameter name Descr iption V alue range Default value T X R X Pre-Shared Key Specify the Pre-Shared Key . 8 - 64 characters silex technology * * Codec size Specify a codec size for 1 frame.
A-4 MVDS X -1 User's Guide Par ameter name Descr iption V alue range Default value T X R X H.Position Oset S a v e t h e o s e t v a l u e f o r H . Po s i t i o n setting that you may have congured from L CD menu. 0 - 100 50 * - H.Width Oset S a v e t h e o s e t v a l u e f o r H .
Ein wichtiger Punkt beim Kauf des Geräts Silex technology MVDS X-1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Silex technology MVDS X-1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Silex technology MVDS X-1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Silex technology MVDS X-1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Silex technology MVDS X-1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Silex technology MVDS X-1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Silex technology MVDS X-1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Silex technology MVDS X-1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Silex technology MVDS X-1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
