Benutzeranleitung / Produktwartung M200D des Produzenten Siemens
Zur Seite of 114
SIRIUS Mo tor Star ter M200D AS-Interface Basic Manual • 03/2009 SIRIUS Answers f or industr y ..
.
Introduction / product description 1 Product family 2 Functions 3 Installation / connection 4 Configuration / parameterization 5 Commissioning 6 Diagnostics 7 Technical specifications 8 Appendix A SIR.
Legal information Warning notice system This manual contains notices y ou have to ob serve in order to en sur e your personal safety, as well as to prevent damage to property.
M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 5 Table of contents 1 Introduction / produ ct descr ipti on ............................. ............................................................... ................... 9 1.1 What are M200D distrib uted motor s t arters? .
Table of contents M200D AS-Interface Basic 6 Manual, 03/2009, A5E01668085-01 3.12 Solid-state/mechanical switch ing technology.................... .......................................................... 42 3.13 Local device interface ..............
Table of contents M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 7 8 Technical spec ificat ions ....................................... ............................................................... ..................... 89 8.1 General technical specifications .
Table of contents M200D AS-Interface Basic 8 Manual, 03/2009, A5E01668085-01.
M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 9 Introduction / product description 1 1.1 What are M200D distributed motor starters? M200D motor starters are standalone devices with a high degree of protection (IP65) for distributed use near the motor.
Introduction / product description 1.1 What are M200D dist ributed motor starters? M200D AS-Interface Basic 10 Manual, 03/2009, A5E01668085-01 Connecting the M200D motor starter to AS-Interface 6 .
Introduction / product description 1.2 Fieldbus interfaces M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 11 1.2 Fieldbus interfaces 1.2.1 AS-Interface Overview The AS-Interface (actuator se.
Introduction / product description 1.2 Fieldbus interfaces M200D AS-Interface Basic 12 Manual, 03/2009, A5E01668085-01 Further information ● Catalogs, customer magazines, and brochures are available on th e Internet ( http://www.automation.siemens. com/net/html_00/support/presales.
M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 13 Product family 2 2.1 Motor starter M200D AS-Interface The following motor starters with AS-Interface (AS-i) are avail able: ● M200D AS-i Basic motor starter with thermistor mot or protection + electronic mot or model: – Direct starter (ele ctromech anical) (DSte) up to 5.
Product family 2.2 Overview of the devi ce functions M200D AS-Interface Basic 14 Manual, 03/2009, A5E01668085-01 2.2 Overview of the device functions Device functions Electromechanical ( DSte, RSte)/ .
Product family 2.3 Design conce pt M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 15 2.3 Design concept Connections and controls on the motor starter RII RQ RII RQ ; RI.
Product family 2.3 Design conce pt M200D AS-Interface Basic 16 Manual, 03/2009, A5E01668085-01 2.3.1 Operator controls The motor starter is equi pped wi th the following operator contr ols: .
Product family 2.3 Design conce pt M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 17 2.3.2 Connections Power terminals ① Infeed for the three phases a s well as the P E and N condu.
Product family 2.3 Design conce pt M200D AS-Interface Basic 18 Manual, 03/2009, A5E01668085-01 2.3.3 Status indicators The following LEDs on the front of the starter indicate the dev ice status: ① Indicators for the devic e status and commu nication ② Indicator for output OUT1 ③ Indicators for inputs IN1 .
M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 19 Functions 3 3.1 Overview of the device functions Device functions Electromechanical ( DSte, RSte)/ electronic (sDSte, sRSte) Fieldbus interf.
Functions 3.2 Introduction M200D AS-Interface Basic 20 Manual, 03/2009, A5E01668085-01 3.2 Introduction Device functions This section describes the devic e functions . All the device fun ctions are assigned inputs (e.g. device parameters) an d ou tputs (e.
Functions 3.3 Basic functions / parameters M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 21 3.3 Basic functions / parameters Definition Basic parameters are "central" parameters required b y a range o f dev ice functions.
Functions 3.4 Fieldbus interface M200D AS-Interface Basic 22 Manual, 03/2009, A5E01668085-01 3.4 Fieldbus interface Response to CPU / master STOP If the fieldbus interface is inte rrupted, all control signals a re set to 0. Note This is only relevant in "automatic" mod e.
Functions 3.5 Motor control M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 23 3.5 Motor control 3.5.1 Control function: reversing starter Description This control function allows the motor starter to control the direction in which motors rotate.
Functions 3.5 Motor control M200D AS-Interface Basic 24 Manual, 03/2009, A5E01668085-01 Brake output Externally-supplied motor bra kes are usually powered via a jump er on the motor terminal board.
Functions 3.6 Motor protection M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 25 3.6 Motor protection 3.6.1 Thermal motor model Description The approximate temperature of the motor is calculated using th e measured motor cu rrents and device parameters "Rated ope ratin g current" and "Tripping c lass".
Functions 3.6 Motor protection M200D AS-Interface Basic 26 Manual, 03/2009, A5E01668085-01 Trip class The trip class (CLASS) specifies the maximum time within which a protective device must trip from a cold state at 7.2 x the s etting current (motor prot ection to IEC 60947).
Functions 3.6 Motor protection M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 27 Prewarning limit for motor heating The motor starter also a ssumes a prewarning role, that is, it i ssues a warning if the motor temperature limit is exceeded. T he prewarning limit for the M20 0D AS-i Basic is 90 % of the motor heating value.
Functions 3.6 Motor protection M200D AS-Interface Basic 28 Manual, 03/2009, A5E01668085-01 Motor protection shutdown response You can use this parameter to determine how the motor starter i s to respo.
Functions 3.7 System monitoring M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 29 3.7 System monitoring 3.7.1 Current limit values Description The motor current and current lim it values can.
Functions 3.7 System monitoring M200D AS-Interface Basic 30 Manual, 03/2009, A5E01668085-01 The blocking curre nt monitoring function is deactivated by sett ing the rotary coding switch to "CLASS OFF". Note If the blocking time expires and the system is still blocked, t he motor starter is shut down.
Functions 3.7 System monitoring M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 31 3.7.2 Asymmetry monitoring Description Three-phase indu ction motors respond to slight asym metries in t he supply voltage with a higher asymmetric cu rrent consumption, which cause s the tempera ture in the stator and rotor windings to increase.
Functions 3.7 System monitoring M200D AS-Interface Basic 32 Manual, 03/2009, A5E01668085-01 3.7.3 Inputs Description The motor starter can u se the "inputs" function to execute various actions, whereby the signals at the digital inputs ar e evaluated.
Functions 3.7 System monitoring M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 33 Input n signal The input level of the digital inputs is stored for input s IN1 and IN2, that is, the active edge executes the input action assi gned to the corresponding input.
Functions 3.7 System monitoring M200D AS-Interface Basic 34 Manual, 03/2009, A5E01668085-01 Description of the actions Quick stop ● The motor and brake output are sh ut down without a group fault. ● "Quick stop" has priority over "Motor CW" and "Motor CCW".
Functions 3.7 System monitoring M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 35 Shutdown with restart ● Causes the motor and brake to shut down. ● Acknowledge d automatically once the cause of the shutdown has b een rectified (initial status).
Functions 3.7 System monitoring M200D AS-Interface Basic 36 Manual, 03/2009, A5E01668085-01 3.7.5 Connector monitoring 3.7.5.1 Power connector The motor starter monitors wh ether the infeed connector on the line side of the motor starter is plugged in.
Functions 3.7 System monitoring M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 37 Connector monitoring Line-side connector monitoring c an be deactivated via the DIP s witch. For more information, see Parameteriza tion via local setti ng (Page 72).
Functions 3.8 Short-circuit protection (c ircuit breaker / disconnec ting means) M200D AS-Interface Basic 38 Manual, 03/2009, A5E01668085-01 3.8 Short-circuit protection (circuit breaker / disconnecti.
Functions 3.9 Communication M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 39 3.9.1 Mode monitoring Data channels The M200D A S-i Basic motor sta rte r has three different data cha nnels: .
Functions 3.9 Communication M200D AS-Interface Basic 40 Manual, 03/2009, A5E01668085-01 ● If no motor ON command is present, a group alarm is output.
Functions 3.10 Trip reset M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 41 3.10 Trip reset Trip reset acknowledges all the faults that are currently prese nt in the starter and that can be acknowledged. A fault can be acknowled ged if its cause has been rectified or if it is no longer present.
Functions 3.12 Solid-state/mechanical switching techn ology M200D AS-Interface Basic 42 Manual, 03/2009, A5E01668085-01 3.12 Solid-state/mechanical switching technology Solid-state switching The motor starter cont rols the motor (two phase s) with thyristo rs.
Functions 3.13 Local device interface M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 43 3.13 Local device interface Description The local optical device interf ace can be used to connect the m otor starter to a hand-held device (order no.: 3RK1922-3BA00 ; RS232 interface cable: 3RK192 2-2BP00).
Functions 3.14 Integrated manual local control M200D AS-Interface Basic 44 Manual, 03/2009, A5E01668085-01 3.14 Integrated manual local control Integrated manual local control (orde r variant) for the M200D m otor starter involv es a key- operated switch and a key pad with four pushbuttons.
Functions 3.14 Integrated manual local control M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 45 Keypad The keypad has four pushbu ttons arranged in a square.
Functions 3.14 Integrated manual local control M200D AS-Interface Basic 46 Manual, 03/2009, A5E01668085-01 Note If the "CW rotation" and "CCW rot ation" pushbuttons are pressed simultaneously, this is classed as an operation fault.
M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 47 Installation / connection 4 4.1 Installation 4.1.1 Installation rules DANGER Hazardous voltage Can Cause Death, Serious I njury, or Property Damage Before starting work, disconnec t the system and device s from the power supply.
Installation / connection 4.1 Installation M200D AS-Interface Basic 48 Manual, 03/2009, A5E01668085-01 4.1.2 Derating What is derating? Derating allows devices to be use d even in severe operating con diti ons by selectivel y restricting the output cap acity.
Installation / connection 4.1 Installation M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 49 Derating diagrams You can use the following diagra ms to determine the derating fa ctors for horizontal, vertical, or flat installation.
Installation / connection 4.1 Installation M200D AS-Interface Basic 50 Manual, 03/2009, A5E01668085-01 .
Installation / connection 4.1 Installation M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 51 4.1.3 Installing the protection guards Protection guard (accessory) CAUTION The protection guards are designe d for a maxim um load of 10 kg.
Installation / connection 4.1 Installation M200D AS-Interface Basic 52 Manual, 03/2009, A5E01668085-01 4.1.4 Installing the motor starter Carry out the following steps to install the motor starter: Step Description 1 Find a flat surface for mounting the device.
Installation / connection 4.1 Installation M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 53 4.1.6 Setting the AS-i address Unique addressing In the factory setting, an I/O m odule (slave) ha s the address 0 .
Installation / connection 4.1 Installation M200D AS-Interface Basic 54 Manual, 03/2009, A5E01668085-01 Offlline addressing with the addressing unit The motor starter is add ressed via the AS-i connection socket.
Installation / connection 4.2 Connection M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 55 4.2 Connection More connection technolo gy products can be found in "Siemens So lution Partners" ( www.siemen s.com/automation/partnerfinder ) under "Distribut ed Field Installation System".
Installation / connection 4.2 Connection M200D AS-Interface Basic 56 Manual, 03/2009, A5E01668085-01 Note the following rules wh en carrying out wiring: Rules for fle xible cables Data Current-carrying capac ity of the plug connec tion as a function of the connectable core cross-sect ions and ambien t temperature T U = 55 °C T U = 40 °C 1.
Installation / connection 4.2 Connection M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 57 Consumer connection on the motor starter For the assignment of X2, see Power terminal (Page 58): ● A flexible Cu cable with 1.
Installation / connection 4.2 Connection M200D AS-Interface Basic 58 Manual, 03/2009, A5E01668085-01 4.2.4 Power terminal Wiring X1 (power supply) and X2 (motor connection) The supply voltage is fed vi a po wer connector X1. The motor is supplied via power connector X2.
Installation / connection 4.2 Connection M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 59 Power supply: Han Q4/2 socket (connection for X1) Socket Assignment 1 Phase L1 2 Phase L2 3 Phase L.
Installation / connection 4.2 Connection M200D AS-Interface Basic 60 Manual, 03/2009, A5E01668085-01 Brake variants 400 V AC 230 V AC 180 V DC b9$& / / ; b9$& / ; 1 9'& / / ; 4.
Installation / connection 4.2 Connection M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 61 The brake output for the M200D motor starter 0 / / / 3( 1 ; 3( 3( 3( .
Installation / connection 4.2 Connection M200D AS-Interface Basic 62 Manual, 03/2009, A5E01668085-01 4.2.6 Digital inputs/outputs Socket assignment The digital inputs and output are available with sta.
Installation / connection 4.2 Connection M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 63 Pin assignment The following diagrams show examp les of circuits (2 and 3-wire system): 2-wire system 3-wire system Note The supply voltage for the digital input s is short-circuit proo f.
Installation / connection 4.2 Connection M200D AS-Interface Basic 64 Manual, 03/2009, A5E01668085-01 4.2.7 AS-Interface Pin assignment Pin Assignment 1 U AS-i+ 2 PWR-AUX - 3 U AS-i– 4 PWR-AUX + 4.
Installation / connection 4.2 Connection M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 65 Connection examples for motor starters The installation guidelines for AS- Interface must always be obs erved: ● The maximum permissible current fo r all M12 connection cables i s restricted to 4 A.
Installation / connection 4.2 Connection M200D AS-Interface Basic 66 Manual, 03/2009, A5E01668085-01.
M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 67 Configuration / parameterization 5 5.1 Configuration Configuration involve s integrati ng the motor starter in the ove rall system by assi gning addresses and parameters. Master requirements The M200D AS-i Basic motor star ter requires at lea st one AS-i mas ter to AS-i spec.
Configuration / parameterization 5.2 Configuration on t he AS-i master CP 343-2 M200D AS-Interface Basic 68 Manual, 03/2009, A5E01668085-01 5.2 Configuration on the AS-i master CP 343-2 Requirement The CP 343-2 communications pro cessor has already bee n configur ed.
Configuration / parameterization 5.2 Configuration on the AS-i master CP 343-2 M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 69 3. Choose the Configuration tab. When you click Selection... , the slave selection di alog is displayed. 4. Select AS-i A/B Slave Universal by double-clicking it.
Configuration / parameterization 5.2 Configuration on t he AS-i master CP 343-2 M200D AS-Interface Basic 70 Manual, 03/2009, A5E01668085-01 5. Enter the following val ues for the AS-i profile: NOTICE ID1 code The default setting of the ID1 c ode for M200D AS-i Basic is 7 ( F).
Configuration / parameterization 5.3 Parameterization M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 71 5.3 Parameterization 5.3.1 Parameterization The motor starter can b e parameterized in.
Configuration / parameterization 5.3 Parameterization M200D AS-Interface Basic 72 Manual, 03/2009, A5E01668085-01 5.3.2 Parameterization via local setting Setting the current limit value The rotary coding switch for setting the operating current I e (0.
Configuration / parameterization 5.3 Parameterization M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 73 Setting the device parameters on the DIP switch Diagram Switch Function Setting 1 Temp.
Configuration / parameterization 5.4 Process images M200D AS-Interface Basic 74 Manual, 03/2009, A5E01668085-01 5.4 Process images Definition of process image The process image is a componen t of the AS-i master system memo ry.
M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 75 Commissioning 6 6.1 Prerequisites Software requirements Configuration softw are used Explanations Configuration software for the AS-i master used See the manual for the AS-i master Commissioning requirements Prior activity For mor e information, see .
Commissioning 6.2 M200D AS-i components M200D AS-Interface Basic 76 Manual, 03/2009, A5E01668085-01 6.2 M200D AS-i components Minimum configuration The overview shows the com ponents you need for oper.
Commissioning 6.3 Procedure M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 77 6.3 Procedure Commissioning procedure The following chart sho ws a logical, step-by-step commissioning procedure.
Commissioning 6.3 Procedure M200D AS-Interface Basic 78 Manual, 03/2009, A5E01668085-01.
M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 79 Diagnostics 7 7.1 Diagnostics Diagnostics data can be read from the motor starter in a number of different ways : ● Diagnostics on the dev.
Diagnostics 7.2 Diagnostics with LED M200D AS-Interface Basic 80 Manual, 03/2009, A5E01668085-01 7.2 Diagnostics with LED 7.2.1 Statuses of the individual LEDs The following LEDs indicate the status o.
Diagnostics 7.2 Diagnostics with LED M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 81 AS-i / fault LED (possible colors: red / green / OFF) Status Meaning Cause OFF Device not ready • No .
Diagnostics 7.2 Diagnostics with LED M200D AS-Interface Basic 82 Manual, 03/2009, A5E01668085-01 Input LEDs IN1 ... IN4 (possible colors: green / OFF) Status Meaning Cause OFF No 24 V DC No input sign.
Diagnostics 7.2 Diagnostics with LED M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 83 SF LED STATE LED DEVICE LED Device faults Red Red Red Current flo wing with no ON command (e.
Diagnostics 7.3 Diagnostics via pa ramete r channel (parameter echo) M200D AS-Interface Basic 84 Manual, 03/2009, A5E01668085-01 7.3 Diagnostics via parameter channel (parameter echo) Diagnostics (dia.
Diagnostics 7.3 Diagnostics via pa rameter channel (parameter echo) M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 85 Call (master to slave): P3 P2 P1 P0 A/B x (free) x (free) 1 Feedback (sl.
Diagnostics 7.3 Diagnostics via pa ramete r channel (parameter echo) M200D AS-Interface Basic 86 Manual, 03/2009, A5E01668085-01 Structure of the job dat a in the send buffer Meaning Byte Bit 7 Bit 4 .
Diagnostics 7.4 Diagnostics with the ad dressing and diagnostics u nit M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 87 7.4 Diagnostics with the addressing and diagnostics unit Diagnostics functions The addressing and di agnostics unit (order no.
Diagnostics 7.5 Troubleshooting M200D AS-Interface Basic 88 Manual, 03/2009, A5E01668085-01 7.5.2 Acknowledging faults Restart after device-internal shutdown If the motor starter shuts down the contac.
M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 89 Technical specifications 8 8.1 General technical specifications Location In the plant Wa ll mounted (near motor) Permissible mounting positi.
Technical specifications 8.2 Motor starter M200D AS-Interface Basic 90 Manual, 03/2009, A5E01668085-01 Note This product is design ed for environment A (industrial environ m ents). In household environments, this device can ca use unwanted radi o interference .
Technical specifications 8.3 Brake control M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 91 Motor starter version DSte / RSte sDSte / sRSte Isolation stability Rated surge capacity U imp 6 .
Technical specifications 8.4 Inputs M200D AS-Interface Basic 92 Manual, 03/2009, A5E01668085-01 8.4 Inputs Input characteristic to IEC60947-1 Appendix S Type 1 Input voltage - Rated value - for signal "0" - for signal "1" 24 V DC -3 .
Technical specifications 8.6 Thermistor motor protection M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 93 8.6 Thermistor motor protection Temperature sens or PTC Thermoclick Evaluation characteristic to IEC 60947-8 Type A — Summation cold resistance sensor circuit < 1.
Technical specifications 8.7 Switching frequency M200D AS-Interface Basic 94 Manual, 03/2009, A5E01668085-01 3RK1315-5NS71-.AA. (1.5 A to 9 A) Class 10 Device setup Vertical Horizontal Rated current I e 5 A 5 A 5 A 5 A 5 A 4.
Technical specifications 8.7 Switching frequency M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 95 ON period (ED) The relative ON period (ED) in % is the ratio between load dura tion and cycle duration for loads that are often switched on and off.
Technical specifications 8.8 Electrical service life of contactor M200D AS-Interface Basic 96 Manual, 03/2009, A5E01668085-01 8.8 Electrical service life of contactor Service life of main contacts (DSte / RSte) to 5.
Technical specifications 8.8 Electrical service life of contactor M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 97 2SHUDWLQJFFOH VIRU FRQW DFWRUW SH 57 .
Technical specifications 8.9 Dimension drawing M200D AS-Interface Basic 98 Manual, 03/2009, A5E01668085-01 8.9 Dimension drawing 294 215 159 Figure 8-3 M200D AS-i motor st arter without protection gua.
M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 99 Appendix A A.1 Order numbers A.1.1 Order numbers Position 1 – 7 — 8 9 10 11 12 — 13 14 15 16 Meaning – 6 ⇓ S ⇓ 1 ⇓ A A ⇓ M200D starter K ⇓ ⇓ ⇓ 0 . 1 5 - 2 . 0 A N ⇓ ⇓ ⇓ 1 .
Appendix A.1 Order numbers M200D AS-Interface Basic 100 Manual, 03/2009, A5E01668085-01 A.1.2 Spare parts/accessories Power supply Designation Order no. Power outlet connector, connector set consisting of coupli ng ho using, straight cable outlet (with clip ), pin insert for HAN Q4/2, inc l.
Appendix A.1 Order numbers M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 101 Motor controller with AS-i communication Designation Order no. Control cable, one e nd prefabricated / ope n, M12 angled cable p lugs for screw mounting, degree of pro tection IP67, 4- pole, 4 x 0.
Appendix A.2 Bibliography M200D AS-Interface Basic 102 Manual, 03/2009, A5E01668085-01 A.2 Bibliography Documentation for M200D AS-i at a glance All the documents in this overview are av ailable for download a t: www.siemens.de/sirius-m200d Each documen t has a doc .
Appendix A.2 Bibliography M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 103 Topic AS-i master Document title Manual DP/AS-Int erface Link Adva nced Publication date 25.
Appendix A.2 Bibliography M200D AS-Interface Basic 104 Manual, 03/2009, A5E01668085-01 Topic Control systems Document title S7-200 Automation System Publication date 13.
M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 105 Glossary AS-Interface (AS-i) The AS-Interface (or actuator/sen sor interface; abbrevi ated to AS–i) is a connectio n system for the lowest process lev el in automation systems.
Glossary M200D AS-Interface Basic 106 Manual, 03/2009, A5E01668085-01 Integrated manual local control Integrated manual local control is an orer variant for the M200 D and involves a key-operated switch and ke ypad.
Glossary M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 107 PROFIBUS PROFIBUS stands for "process fiel dbus". PROFIBUS is a manufactu rer-indepen dent standard to network the field dev ic es (e.g. PLCs, actuators, fi nal controlling elem ents and sensors).
Glossary M200D AS-Interface Basic 108 Manual, 03/2009, A5E01668085-01 Trip class (shutdown class) The trip class defines the start up time at a particular current before the trip occurs. Different classes exis t (e.g. CLASS 10, 20 , 30, etc .), whereby CLASS 30 i s the longest permissible startup time.
M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 109 Index A Absolute current load, 46 Acknowledgment, 85 Addressing, 51 Addressing unit, 51, 84 Alarm, 79 Ambient temperature Tu, 46 AS-i / fau.
Index M200D AS-Interface Basic 110 Manual, 03/2009, A5E01668085-01 H Han Q4/2 socket, 56 Han Q8/0 pin, 57 I I/O fault (LPF), 80 Input Actions, 29 n level, 30 n signal, 30 Quick stop, 31 Input process .
Index M200D AS-Interface Basic Manual, 03/2009, A5E01668085-01 111 SF LED, 76 Short-circuit protection Circuit breaker / disconnecting means, 35 Circuit breakers, 35 Response when circuit breake r is .
Index M200D AS-Interface Basic 112 Manual, 03/2009, A5E01668085-01.
.
www .siemens.com/automation Subject to change without prior no tice Order No.: 3RK1702-2BB11-1AA1 © Siemens AG 2009 Siemens AG Industr y Sector Postfach 48 48 90327 NÜRNBERG GERMANY Ser vice & Suppor t SIRIUS www .siemens.com/sirius-m200d Download catalogs and information mat erial: www .
Ein wichtiger Punkt beim Kauf des Geräts Siemens M200D (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Siemens M200D noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Siemens M200D - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Siemens M200D reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Siemens M200D erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Siemens M200D besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Siemens M200D verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Siemens M200D. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Siemens M200D gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
