Benutzeranleitung / Produktwartung RD-8504 des Produzenten Sherwood
Zur Seite of 71
RD-8504 cover_8504:cover_8504 2009-11-04 오후 2:34 페이지 1.
ENGLISH 2 IMPOR T ANT SAFETY INS TR UCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
ENGLISH 3 Introduction : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. T his symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's e nclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ENGLISH 4 c o n t e n t s • IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 • Introduction READ THIS BEFORE OPERATING YOUR UNIT . . . . . . . . . . . . . .
ENGLISH 5 System Connections • Please be certain that this unit is unplugged from the AC outlet before making any connections. • Since different components often have different terminal names, carefully read the operating instructions of the component connected.
ENGLISH 6 • The jacks of VIDEO 1 may also be connected to a DVD recorder or other digital video recording component. For details, refer to the operating instructions of the component to be connected. • The jacks of VIDEO 2/VIDEO 3 can also be connected to an additional video component such as a cable TV tuner or satellite system.
ENGLISH 7 ■ HDMI (High Definition Multimedia Interface) connection : (*1) • You can connect the source component (BD player, etc.) to the display component (TV, projector, etc.) through this receiver with using a commercially available HDMI cord. • The HDMI connection can carry uncompressed digital video signals and digital audio signals.
ENGLISH 8 • Use these jacks to connect the corresponding outputs of a DVD player or external decoder, etc. that has 6, 7 or 8 channel analog audio outputs. • In case of 6 or 7 channel outputs, do not connect both of the SURROUND BACK L and R inputs or the SURROUND BACK R input of this unit.
ENGLISH 9 • Be sure to connect speakers firmly and correctly according to the channel(left and right) and the polarity (+ and -). If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connection is incorrect, the sound will be unnatural and lack bass.
ENGLISH 1 0 Speaker placement 1. TV or Screen 2. Front left speaker 3. Subwoofer 4. Center speaker 5. Front right speaker 6. Surround left speaker 7. Surround right speaker 8. Surround back left speaker 9. Surround back right speaker 10. Surround center speaker 11.
ENGLISH 1 1 ENGLISH 8. CONNECTING FOR SYSTEM CONTROL • Connect this jack to the DIGI LINK-i jack of Sherwood iPod dock that allows you to control the iPod with the unit's remote control. SIRIUS • Connect the SIRIUS connector to the Sirius Connect Home Tuner kit (sold separately).
1 2 • ROOM 2 playback feature allows you to play a different program source in another room as well as one source in the main room at the same time. • For ROOM 2 playback, connect the ROOM 2 OUT jacks to the amplifier, TV, etc. installed in another room, or connect the ROOM 2 speaker terminals to the speakers.
1 3 Front Panel Controls 1. POWER switch 2. POWER ON/STANDBY button 3. STANDBY indicator 4. INPUT SELECTOR knob 5. BAND button 6. EXTERNAL IN button 7. SU RRO UND MO DE /CONTROL DOWN( ▼ ) button 8. STEREO/CONTROL UP( ▲ ) button 9. MASTER VOLUME CONTROL knob 10.
ENGLISH 1 4 • The FRONT AUX IN jack can be connected to additional audio components such as an MP3 player, etc. ■ Note : • When connecting this jack to an MP3 player, etc., you should use the stereo mini cord, not a mono mini cord. ■ FRONT AUX IN JACK • To use Auto Setup function, connect the supplied microphone to the SETUP MIC jack.
ENGLISH 1 5 Universal Remote Controls 2 1 4 5 8 1 2 1 4 1 7 22 20 25 1 9 9 3 6 7 1 1 1 3 1 0 1 5 1 6 1 8 23 24 21 This universal remote control can operate not only this receiver but also most popular brands of audio and video components such as iPod docks, CD players, tape decks, TVs, BD/DVD players, satellite receivers, cable boxes, etc.
ENGLISH 1 6 ■ Notes : • Some functions for each component may not be available or may work differently. • Depending on other kinds of components that are available for each DEVICE button, some functions may not be available or may work differently, too.
ENGLISH 1 7 L o A D I n G B A t t e R I e s o P e R A tI nG c o M P o n e n t s W I t H R e M o te c o n t R o L R e M o t e c o n t R oL o Pe R A t I o n R A n G e • Use the remote control within a range of about 7 meters (23 feet) and angles of up to 30 degrees aiming at the remote sensor.
ENGLISH 1 8 5. Repeat the above steps 1 to 4 for each of your components. U s I n G F U n c t I o n s o F R e M o t e c o n t R oL Entering a setup code • This remote control can control up to 8 different components.
ENGLISH 1 9 • If removing all punch-through functions is performed successfully, the LED will flicker twice. Using a punch-through function This remote control may be programmed to operate either th.
ENGLISH 2 0 Programming a macro function • The macro function enables you to program a series of button operations(up to 10) on this remote control into a single button. • You can store up to three separate macro command sequences into “M1”, “M2” and “M3” buttons.
ENGLISH 2 1 LISTENING T O A PROGR AM SOURCE Operations Before operation • Enter the standby mode. • The STANDBY indicat or light s up. Th is means that the receive r is not disconn ected from t he AC ma ins and a small amount o f curren t is ret ained to support the ope ration readin ess.
ENGLISH 2 2 Muting the sound • "MUTE" flickers. • To resume the previous sound level, press it again. • Ensure that the SPEAKER button is set to off. • When listening to a DTS or Dolby Digital program source, if the headphones are plugged in and the SPEAKER button is set to off, it enters the 2CH downmix mode automatically.
ENGLISH 2 3 ■ DTS Digital Surround DT S D igi tal S urr oun d(a ls o c all ed si mpl y D TS ) s upp ort s up to 5. 1 d isc ret e cha nne ls an d u ses le ss co mpr ess io n f or hi gh fi del ity re pr odu cti on. U se it wit h DVD s a nd CD s b ear in g t he DT S l ogo .
ENGLISH 2 4 • The following modes apply conventional 2-channel signals such as digital PCM or analog stereo signals to high performance Digital Signal Processor to recreate sound fields artificially. Select one of the 7 provided surround modes according to the program source you want to play.
ENGLISH 2 5 ENJO YING SURR OUND SOUND • Each time this button is pressed, the mode changes as follows : Auto surround mode : The optimum surround mode will be automatically selected depending on the signal format being input.
ENGLISH 2 6 Continued ■ To cancel the surround mode for stereo operation ■ 2CH downmix mode • Thi s mode a llows th e multi- channel signals encoded in DTS or Dolby D igital f ormat, e tc. to b e mixed down int o 2 fron t channe ls and t o be rep roduced through only two front sp eakers o r throug h headph ones.
ENGLISH 2 7 Adjusting the current channel level • Each tim e the se b utto ns a re p ress ed, the corr espo nding cha nnel is s elec ted as f ollo ws: → CAL (or MOVIE, etc.
ENGLISH 2 8 Re ca ll ing t he m em or ize d ch an ne l l ev el s • "CAL" (or "MOVIE", etc.) is displayed for several seconds. • If the memory mode disappears, press this button again. • Then the channel levels memorized into the selected preset memory are recalled.
ENGLISH 2 9 LISTENING T O RADIO BR O ADC AS TS Auto tuning • Each time this button is pressed, the band changes as follows : → FM ST → FM MONO → AM → SIRIUS ("ST" lights up) (&.
3 0 • The station has now been stored in the memory. • A stored frequency is erased from the memory by storing another frequency in its place. • If "MEM " go es o ff, star t aga in f rom the abov e st ep 2. ■ MEMORY BACKUP FUNCTION The following items, set before the receiver is turned off, are memorized.
ENGLISH 3 1 ENGLISH 1 . Press the BAND button or the TUNER button repeatedly until the SIRIUS mode is selected. 2. Press the TUNING UP(+)/DOWN(-) buttons repeatedly to select SR 000. 3. To sign up, access the website at "http://activate.siriusradio.
ENGLISH 3 2 3. While displaying the selected category, select the desired channel. Examples: For "3" : For "27" : For "124" : • When "SR - - -" disappears, repeat again from the above step 1. 1 . In the SIRIUS mode, press the SEARCH MODE button to select the direct search mode, then press the ENTER button.
ENGLISH 3 3 ENGLISH • You can display SIRIUS information such as channel name, artist name, song title and signal strength. • In the SIRIUS mode, Displaying SIRIUS information • Each time the DI.
• Then “CFM ” is displayed for several seconds. 4. While displaying "CODE ", input the password (4-digit number) with using the NUMERIC (0~9) buttons. 3 4 ENGLISH • When you input the correct code, the current channel is locked or unlocked.
3 5 RECORDING • The audio and video signals from the desired input will be dubbed onto the VIDEO 1 and you can enjoy them on the TV set and from the speakers. ■ To record audio signals • Connect the AUDIO IN/OUT jacks of "VIDEO 1" to audio recording equipment such as a tape deck, an MD recorder, etc.
ENGLISH 3 6 D I G I T A L A U D I O R E C O R D I N G W I T H M D R E C O R D E R • Only when the OPTICAL DIGITAL OUT of this receiver is connected to the OPTICAL DIGITAL IN of the MD recorder or CD recorder, you can enjoy high-quality sound of digital recording without converting the original signals.
ENGLISH 3 7 Operating the sleep timer • Each time this button is pressed, the brightness of the fluorescent display changes as follows: → ON → dimmer → OFF • In the display OFF mode, pressing any button will restore the display ON mode.
ENGLISH 3 8 R O O M 2 S O U R CE P L A YB A C K • This function allows enjoying one source in the main room and playing another in a different room at the same time. ■ Notes: • The analog signals from the EXTERNAL INs and the digital signals cannot be output to the different room, meaning no playback in a different room.
3 9 ENGLISH • ROOM 2 ~ is displayed for several seconds. • Each time the button is pressed, the ROOM 2 mode changes as follows : ON : To turn on the ROOM 2 function. ↕ ("R2" lights up.) OFF : To turn it off. ("R2" goes off) ■ Note : • When ROOM 2 mode is set to OFF, the ROOM 2 volume cannot be selected.
ENGLISH 4 0 OSD Menu Settings • Th e OS D (O n- Sc re en D is pl ay ) men u is a s et ti ng m en u th at i s di sp lay ed o n th e mo ni to r TV a nd a ll ow s you t o pe rf or m th e se tu p pr oc ed ur es e as il y.
Amp Assign Subwoofer mode HDMI Audio Output Tone Control Bass Treble Cinema EQ Momentary OSD Save/Recall BACK NEXT Auto Setup Room EQ Speaker Config Speaker X-over Speaker Distance Channel Level B ACK NEXT VIDEO 1 V2/iPod VIDEO 3 BT CD TAPE F. AUX TUNER EXT.
4 2 ENGLISH Setup menu flow SYST EM (Sys tem S etup) SPK / EQ (Spe aker / Roo m EQ Setup ) AUTO SET (Auto Setu p) ROOM EQ CONF IG (Spe aker Confi gurat ion) X-OV ER (Spe aker Cross over) DIST ANCE (Sp.
4 3 ENGLISH I NPU T* 3 ( Inp ut Se tup) MLT ROOM (Mul ti Ro om Se tup) R2 S ET (R oom2 Set) R2 I NPUT (Roo m2 In put) R2 V OL (R oom2 Volu me) PARA MTR (Sou nd Pa ramet er) PANO RAMA C-WI DTH ( Cente r Wi dth) DIME N (Di mensi on) DRC DD (D ynami c Ra nge C ompre ssion Dolb y) DRC THD ( Dynam ic R ange Compr essio n Dol by Tr ueHD ) ADV.
ENGLISH 4 4 SETTING THE S Y STEM SETUP • AMP Assign : To assign the surround back channels' power amplifier correctly depending on how to use the speakers. • Subwoofer Mode : To select the desired subwoofer mode. • HDMI Audio Output : To output the digital audio signals from the HDMI MONITOR OUT connector.
ENGLISH 4 5 • The surround back channels' power amplifier can drive the surround back speakers, the ROOM 2 speakers or the front bi-amp capable speakers.
ENGLISH 4 6 On : To compensate for edgy or shrill movie sound tracks. ↕ Off : To turn off the cinema EQ function. On : To turn on the OSD function that shows the status corresponding to each operation on this unit momentarily. ↕ Off : To turn it off.
ENGLISH 4 7 SETTING THE SPEAKER / ROOM EQ SETUP • After you have installed this receiver and connected all the components, you should adjust the speaker settings for the optimum sound acoustics according to your environment and speaker layout.
ENGLISH 4 8 • Loud te st tones are out put suc cessivel y and th en if a series o f auto s etup pro cedure h as been complet ed, "COM PLETED" will b e displa yed. • To stop the aut o setup procedu re while perform ing it, press th e CURSOR LEFT butto n.
ENGLISH 4 9 When selecting the Room EQ • The room EQ is a kind of room equalizer for your speakers. According to the acoustic characteristics of your room measured by the auto setup, the room EQ automatically adjusts the frequency response of your speakers.
ENGLISH 5 0 When selecting the Speaker Configuration 1 . Press the CURSOR UP/DOWN buttons to select the Speaker Configuration, then press the CURSOR RIGHT button to enter the setting menu. 2. Press the CURSOR UP/DOWN buttons to select the desired speaker, then press the CURSOR RIGHT button to enter its setting menu.
5 1 • You can adjust the crossover frequency within the range of 40 ~ 250 Hz. • Select "Full Range" when the selected speaker can fully reproduce the low frequencies below 40 Hz. • When the CURSOR LEFT button is pressed on the setting menu, the previous menu will be returned to.
5 2 ■ When selecting the desired unit • You can select either Meter or Feet. • Once a unit is selected, the distances are automatically changed in the selected unit. ■ When setting the distance • You can set the distance within the range of 0 ~ 9.
5 3 • You can adjust the current channel levels as desired. These adjusted levels are just memorized into user’s memory ("Calibrate"), not into preset memory("Save 1(Movie)", "Save 2(Music)").
ENGLISH 5 4 ■ Me mori zing the adju sted cha nnel lev els and reca llin g th em. • You can memorize the adjusted channel levels into preset memory(“Save 1(Movie)”, “Save 2(Music)”) and recall the memorized whenever you want. Continued Calibrate : To memorize the adjusted channel levels into user’s memory.
ENGLISH 5 5 • This menu allows you to make the various settings depending on how to use the input sources connected to this receiver. SETTING THE INPUT SETUP When selecting the items other than Re-Name Example: When selecting the VIDEO 1 ■ No te : • Depe ndin g on the inpu t so urce , so me i tems can not be s elect ed.
ENGLISH 5 6 ■ Wh en s ele ctin g th e H DMI Ass ign • You should assign the connected HDMI INs to the desired of VIDEO 1 ~ VIDEO 3, EXT.IN. (For details, refer to "CONNECTING VIDEO COMPONENTS" on pages 6 ~ 7.) • You can select the desired of HDMI 1 ~ HDMI 3.
5 7 Continued ■ Wh en s ele ctin g th e A udio Mo de • You can select the desired audio input signal to be played. ■ No tes : • Be s ure to se t th e Au dio Mode to the audi o in put which is conn ecte d an d as sign ed t o th e se lecte d in put sour ce.
5 8 Continued ■ Wh en s ele ctin g th e H D Au dio • When the source components that cannot support the HD audio signal format (such as Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio, DTS-HD Master Audio, etc.) are connected to the HDMI IN of this receiver, some components may not output any audio signals from its HDMI OUT.
5 9 ENGLISH • The name is s tore d in the mem ory. ■ To cle ar t he na me y ou e nter ed • P ress the CURSOR LEFT button to sele ct t he C ance l, t hen pres s th e EN TER butto n. 6. To confirm your entry, press the CURSOR RIGHT button to select the Finish, then press the ENTER button.
ENGLISH 6 0 • The Room 2 function allows enjoying one source in the main room while playing another in a different room at the same time. • Room 2 : To turn on or off the ROOM 2 function.
■ When selecting the Dolby Off ↕ Low ↕ Mid ↕ High 6 1 SETTING THE SOUND P ARAMETER When selecting the NIGHT MODE • This function compresses the dynamic range of previously specified parts of.
ENGLISH 6 2 SETTING THE AD V ANCED VIDEO • PReP : To improve the progressive video signal by progressive reprocessing. • Detail Enhancement : To enhance the entire picture by making details stand out. • Edge Enhancement : To enhance the picture by shapening object edges.
6 3 ENGLISH T roubleshooting Guide If a fa ult occur s, r un t hrou gh t he t able bel ow b efor e tak ing your rec eive r fo r re pair . If the faul t per sist s, a ttem pt t o so lve it b y sw itch ing t he r ecei ver off and on a gain . I f th is fa ils to r esol ve t he s itua tion , co nsul t you r dea ler.
ENGLISH 6 4 Specifications ■ AMPLIFIER SECTION • Power output, stereo mode, 6 Ω, THD 1.0 %, 40 Hz~20 kHz | 2 × 100 W • Total harmonic distortion at -3 dB, 6 Ω, 1 kHz | 0.01% • Intermodulation distortion 60 Hz : 7 kHz= 4 : 1 SMPTE, 6 Ω, 95 W | 0.
ENGLISH 6 5 Setup Code T able AOC 005 003 Admiral 041 031 Aiko 014 Akai 005 Alaron 026 Ambassador 024 America Action 027 Ampro 043 Anam 027 047 048 049 Audiovox 030 027 014 034 Baysonic 027 Belcor 003.
ENGLISH 6 6 Admiral 027 021 Adventura 050 Aiko 025 Aiwa 005 034 Akai 026 America Action 025 America High 004 Asha 023 Audiovox 005 Beaumark 023 Bell & Howell 017 Brocksonic 021 Broksonic 020 018 0.
ENGLISH 6 7 Headquarter 011 Hitachi 034 008 026 JVC 014 026 Jensen 026 KEC 005 025 KLH 015 Kenwood 014 026 006 Kodak 004 005 LXI 005 Lloyd’s 034 Logik 015 MEI 004 MGA 023 009 MGN Technology 023 MTC .
ENGLISH 6 8 Hitachi 004 (TV use 008) 034 HQ 034 Lloyds 034 MGA 023 Megavox 016 (TV use 010) 004 (TV use 008) 034 Magnin 023 Memorex 005 028 (TV use 042) Mitsubishi 027 (TV use 041) Orion 001 Panasonic.
6 9 ENGLISH Tusa 010 TV86 015 Unika 018 Universal 018 019 Viewstar 015 Zenith 024 Zentek 022 AlphaStar 008 Chaparral 001 Echostar 009 Expreevu 009 General Instrument 016 015 018 Hitachi 011 HTS 009 Hughes Net.
7 0 ENGLISH GE 043 Lutron 044 One For All 042 Radio Shack 043 Security System 042 Universal X10 042 X10 042 A UX -H OME A U T OMA TIO N Aiwa 045 029 Fisher 005 Harman/Kardon 046 JBL 046 JVC 047 Jerrol.
5707-00000-273-0S RD-8504 cover_8504:cover_8504 2009-11-04 오후 2:34 페이지 2.
Ein wichtiger Punkt beim Kauf des Geräts Sherwood RD-8504 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sherwood RD-8504 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sherwood RD-8504 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sherwood RD-8504 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sherwood RD-8504 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sherwood RD-8504 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sherwood RD-8504 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sherwood RD-8504. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sherwood RD-8504 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
