Benutzeranleitung / Produktwartung VL-WD255U des Produzenten Sharp
Zur Seite of 124
VL-WD255U/hyou; 00/12/26/18:00 LIQUID CR Y ST AL DISPLA Y CAMCORDER OPERATION MANUAL MODEL VL-WD255U Important Model No.: Serial No.: Please read this operation manual carefully before using the VIEWCAM.
i Thank you for purchasing this camcor der from SHARP . The camcorder will enhance your home video enjoyment and allow you to captur e those special moments. Please read this operation manual to familiarize yourself with the camcorder’ s features, so that you will get the most out of it.
ii W ARNING — FCC Regulations state that any unauthorized changes or modifica- tions to this equipment not expressly appr oved by the manufacturer could void the user ’ s authority to operate this equipment.
iii product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer ’ s instructions have been adher ed to.
iv 15. Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power cir cuits, or where it can fall into such power lines or circuits.
v Quic k Operation Guide Please consult this operation manual further for details on these and other functions of your camcorder . Charging the Battery P ack 1 Connect the supplied power cord to the A C power soc ket on the AC adapter/ battery charger , and inser t the AC plug into a power outlet.
vi SAVE REC SAVE REC Inserting a Mini D V Cassette 1 Attach the pow er source to the camcorder , then slide the cassette compartment door release and open the cassette compar tment door . 2 Inser t the cassette fully with the window f acing outwards , and with the erasure protect tab f acing upwards.
vii T ape Playback 1 Press the LCD monitor OPEN release button ( 1 ), and open the LCD monitor to a 90° angle to the camcorder body ( 2 ). 2 Adjust the LCD monitor to an angle that allows easy vie wing on the on-screen picture. T o stop playback Press d .
viii Card Recor ding 1 Make sure that a SmartMedia card (commercially av ailable) is inser ted. Lock button Card Pla yback 1 Press the LCD monitor OPEN release button ( 1 ), and open the LCD monitor to a 90 ° angle to the camcorder body ( 2 ). 2 Remov e the lens cap, and lift up the viewfinder .
ix Supplied Accessories Battery pack BT -L221 n * AC adapter/ battery charger UADP-0321T AZZ* Power cord QACCD0031T APZ DC cable QCNW-1957T AZZ Remote control RRMCG0100T ASA AA batter y for remote con.
x Optional Accessories Standard-life battery pack BT -L221 n Extended-life battery pack BT -L441 n Zoom microphone VR-5MCN Note: The listed model names are for U.
xi • When the camcorder is not in use, remem- ber to remove the cassette tape, turn off the power , and disconnect the camcorder from the po wer source.
xii P ar t Names ............................................................... 1 Quick Ref erence List ................................................. 4 On-screen Displa y Index ........................................... 5 W ar ning Indicators ..
xiii Useful Features Quick Return ........................................................... 36 Edit Search ............................................................. 36 F ade In and F ade Out ............................................. 37 Wide Screen (16:9) .
xiv SmartMedia Card Features Appendix Camera Recor ding Inser ting and Remo ving a Smar tMedia Card (Commercially av ailable) ....................................... 73 Card Recording ....................................................... 74 Selecting the Picture Resolution .
1 Operation References Operation References P art Names For details on the use of each part, refer to the page number indicated in brackets. Left view W/B (White Balance) button [ p. 52 ] CA T’S EYE switch [ p. 35 ] Lens hood Zoom lens Remote sensor [ p.
2 Operation References Left view Zoom microphone mounting hole [ p. 55 ] LCD monitor [ p. 19 ] LCD monitor OPEN release button [ p. 19 ] Lithium battery compartment door [ p. 13 ] Viewfinder [ p. 18 ] Diopter adjustment [ p. 18 ] Power source PUSH release button [ pp.
3 Operation References Operation References Right view S-VIDEO socket [ pp. 24, 65, 66 ] VIDEO jack [ pp. 24, 65, 66 ] AUDIO L jack [ pp. 24, 65, 66 ] AUDIO R jack [ pp. 24, 65, 66 ] STILL button [ pp. 39, 40, 61, 74 ] Power Zoom Wide angle/ T elephoto contr ol [ p.
4 Operation References Quic k Reference List Below are some examples of camcor der ’ s features. • T o recor d the subject with higher -quality audio. — See page 31 (Selecting the 16-bit Audio Recording Mode) • T o recor d power ful close-up images.
5 Operation References Operation References On-screen Displa y Index For details on the use of each function, refer to the page number indicated. AU TO AU TO LI G H T SP 1 2 bit 30 min M AN . FO CUS EX P OS U R E SHU T . SP E E D P I C. EF FECT SCE NE M ENU F ADE QK.
6 Operation References DIS P LA Y SCE NE SE L F T IM ER ME N U DI S M AN. F OCUS E XPOSURE SHU T . SP E E D P I C . EFFEC T MA NU AL S E T RE C M ODE SNAP EFF.
7 Operation References Operation References W arning Indicators If a warning indicator appears on the screen, follow the specified instructions. Display ed for the first 3 seconds Display ed after 3 seconds Description of warning There is no video cassette in the camcor der .
8 Operation References Note: • N indicates a flashing display . Display ed for 5 seconds Description of warning The SmartMedia card is not inserted or is inserted improperly . Check how the card is inserted (see page 73 ). The capacity of the SmartMedia card is full and cannot stor e any more images.
9 Preparation Preparation Preparation Charging the Battery P ack Charge the battery pack with the supplied AC adapter/battery charger before use. POWER indicator Note: • Remove the DC cable fr om the AC adapter/ battery charger when charging the battery pack.
10 Preparation Attaching and Remo ving the Battery Pac k Attaching the Battery P ack 1 Make sure that the P ower switch is set to OFF . Power switch 2 Lift up the vie wfinder .
11 Preparation Preparation P owering the Camcor der fr om an A C Outlet Y ou can also power the camcorder from a power outlet by using the supplied AC adapter/ battery charger and DC cable.
12 Preparation SA VE REC SA VE REC Inserting and Removing a Mini D V Cassette Inserting a Cassette 1 Attach the pow er source to the camcorder , then slide the cassette compartment door release and open the cassette compar tment door . • A confirmation sound is made, and the cassette holder extends and opens automatically .
13 Preparation Preparation Installing the Lithium Memory Battery Installing the Lithium Battery The supplied lithium battery is used to store the memory of the date and time settings. 1 Press the LCD monitor OPEN release button ( 1 ) and open the LCD monitor ( 2 ).
14 Preparation ENG L I SH LA N G UA GE F RAN Ç AI S ESPA Ñ OL RE M O T E SOUND TI M E C O D E TC O UT D E MO MO D E LA N G UA GE EN G L I SH OTHERS SET [ BU T T O N] Selecting the Language f or the On-screen Displa y This camcorder allows you to choose fr om among English, French or Spanish for the on- screen display language.
15 Preparation Preparation MENU/DISPLA Y button Power switch Operation button LCD monitor OPEN release button DIS P L A Y DYL T SAVE AR E A SE T T I N G 12H 24 H LO N D ON 1 CLOC K SE T NE W YO R K 20 DIS P LA Y DYL T SAVE AR E A SE T T I NG 12H 24 H CLOC K SE T JA N .
16 Preparation JUN. 12 00 AM : 2 2 002 . SE T T I N G JUN. 10 00 AM : 2 2 002 . SE T T I N G JUN. 10 30 A M : 2 2 002 . SE T T I N G 12H 24H DIS P L A Y DYL T SAVE AR E A SE T T I N G 12H 24 H CLOC K .
17 Preparation Preparation Adjusting the Hand Strap 1 Open the hand strap flap ( 1 ) and the grip strap ( 2 ). 2 Loosen the grip strap , pass your right hand through the loop , and put your thumb on the REC ST ART/ST OP button. Then, pull the grip strap tight until it fits snugly .
18 Preparation Using the Viewfinder Y ou can record the subject using the electr onic LCD viewfinder . Y ou can also watch playback through the viewfinder . Viewfinder Power switch 1 Lift up the vie wfinder . Note: • Y ou can raise the viewfinder to aim the camcorder better depending on your position.
19 Preparation Preparation Using the LCD Monitor Y ou can use the LCD monitor to play back recor dings that you have made. Y ou can also watch the subject on the LCD monitor while recor ding. Power switch LCD monitor 1 Press the LCD monitor OPEN release button ( 1 ), and open the LCD monitor to a 90 ° angle to the camcorder body ( 2 ).
20 Basic Operations Easy Camera Recor ding on T ape in Full Auto Mode • Before you start recor ding, perfor m the operations described on pages 9 through 19 to prepar e your camcorder for r ecording. Basic Operations Camera Recor ding Media Selection switch Power switch REC ST ART/ STOP button 1 Remov e the lens cap, and lift up the viewfinder .
21 Basic Operations Camera Recording Basic Operations Zooming Zooming allows you to move visually closer to or farther from a subject without physically changing your position.
22 Basic Operations Remaining Recor ding Time Displa y When the camcorder is r ecording in T APE- CAMERA mode, an on-screen indicator displays the approximate r emaining tape time in minutes.
23 Basic Operations Playbac k Basic Operations T ape Playback The LCD monitor screen functions as a handy playback monitor . Nothing needs to be connected, allowing instant on-screen play- back with the sound through the built-in speaker .
24 Basic Operations W atching the Pla yback on a TV Y ou can connect the camcorder to a TV to allow a larger audience to enjoy playback. Jack cover 2 Connect the camcorder to y our TV (or VCR) with the supplied audio/video cable , as shown.
25 Basic Operations Playbac k Basic Operations Video Searc h The video search function makes it easy to search for a desir ed scene on the tape. Operation button 1 During playbac k in T APE-VCR mode, press r (or e ) on the Operation button. • The playback picture fast forwar ds (or reverses).
26 Useful Features Selecting the Camcor der Mode This camcorder includes functions for use as both a video camera for recor ding and playing back images on tapes and as a digital still camera for recor ding and playing back still images on SmartMedia cards.
27 Useful Features Useful Features Using the Controls The following controls on the camcor der can be used to select and operate the various functions, settings and on-screen displays. MENU/DISPLA Y button P ower switch T o turn the power on, hold down the Lock button and set the Power switch to CAMERA or VCR.
28 Useful Features Selecting the User Mode This camcorder featur es three user modes for the camera recor ding functions. The selectable items on the menu screen ar e differ ent depending on the user mode. Media Selection switch User mode A uto mode (A UT O): Lets you adjust all menu settings except manual settings.
29 Useful Features Useful Features Using the Menu Screens The menu screens can be used to adjust the various settings of camcorder . Lock button 1 Set the Media Selection s witch to T APE or CARD . 2 Hold down the Loc k button and set the P ower s witch to CAMERA or VCR.
30 Useful Features Recor ding in LP (Long Play Recor ding) Mode This camcorder allows you to r ecord in LP (Long Play Recording) mode for appr oximately 50% more r ecording time with the same pictur e quality as that in SP (Standard Play Recor ding) mode.
31 Useful Features Camera Recording Useful Features Selecting the 16-bit A udio Recor ding Mode This camcorder allows you to select between the 12-bit and 16-bit audio recor ding modes. The camcorder normally recor ds audio in the 12-bit audio recor ding mode.
32 Useful Features Setting the Digital Zoom Y ou can select from among four differ ent zoom ranges: 1 – 26 K (optical zoom), 26 – 50 K (digital zoom), 26 – 100 K (digital zoom) or 26 – 780 K (digital zoom). The digital zoom allows you to recor d powerful close-up pictures with the same operation as normal zooming.
33 Useful Features Camera Recording Useful Features Gamma Brightness Compensation When the subject is backlit, the image will appear dark if it is recor ded normally . The gamma brightness compensation function improves the pictur e by increasing the brightness of the subject while leaving the brighter portion of the image unaffected.
34 Useful Features Gain-up When you are r ecording in a dark or poorly- illuminated location, “ LIGHT ” is displayed on the screen. Use the gain-up function to r ecord a brighter picture. GAMMA/BRIGHTER button Note: • At locations where lighting is adequate, “ LIGHT ” will not appear .
35 Useful Features Camera Recording Useful Features Night Recording (Cat’ s Eye) The night recor ding function allows you to recor d the subject in darkness. This is useful when you want to recor d subjects at night, e.g. a nocturnal animal. CA T ’ S EYE switch Note: • Use Night Recording when “ LIGHT ” is displayed.
36 Useful Features Quic k Return When you have been playing back what you have recor ded on the tape, and wish to quickly return to recor ding from the end of the last recor ded scene, use the quick return function. Operation button 1 Set the camcorder to T APE-CAMERA mode.
37 Useful Features Camera Recording Useful Features F ade In and F ade Out The fade function allows you to gradually bring the image and sound in or out at the beginning or end of a scene for creating scene transi- tions. This is especially effective for indicating a dramatic change in scenery .
38 Useful Features Normal screen T o cancel Fade mode Select “ OFF ” in step 4 in “ Setting Fade Mode ” . T o use Fade Out only 1 During camera recording in T APE- CAMERA mode, perf or m steps 2 to 5 in “ Setting F ade Mode ” to displa y “ F ADE ” .
39 Useful Features Camera Recording Useful Features Still Recording on T ape Y ou can record still images of subjects with normal sound on a tape by selecting one of two still recor ding modes. T ype of Still Recording modes SNAP: A still picture is r ecorded for 6 seconds.
40 Useful Features Still Recording Eff ects Y ou can select one of these still recording effects to recor d the still images with an effect. T ype of Still Recording Effects PHO T O SHO T : A still picture is r ecorded following the sound and visual effects of a camera shutter closing.
41 Useful Features Camera Recording Useful Features Using P-IN-P mode 1 P erform the steps in “ Selecting a still recording eff ect ” to select “ P-IN-P ” (see page 40). 2 In Recording Standby mode , press the STILL button. • An inset image of the subject is displayed.
42 Useful Features Letting the Subject Monitor the Shot Open the LCD monitor and rotate it 180 ° vertically so that the screen faces the other way and the subject can monitor the shot while you are recor ding with the viewfinder . If the camcorder is steadied, you can r ecord yourself in the scene by watching yourself on the LCD monitor .
43 Useful Features Camera Recording Useful Features A uto Focus The camcorder is pr eset to Auto Focus mode, which is designed to focus on most types of subjects. In Auto Focus mode, the camcorder automatically focuses on whatever is in the center of the scene.
44 Useful Features 3 Press d or y to select “ ON ” , then press e . RE M O T E ON 4 Press the MENU/DISPLA Y button to turn off the menu screen. Operating the Remote Control 1 Open the LCD monitor completely ( 1 ), then rotate it 180 ° v er tically ( 2 ).
45 Useful Features Playbac k Useful Features Pla yback Functions with the Remote Contr ol These playback functions can be operated using the supplied remote contr ol.
46 Useful Features Using the Time Code The time code shows the hour , minute and second of recor ding, and the frame number (1 frame = approx. 1/30 sec.
47 Adv anced Features Camera Recording Advanced Features Subject is too dark. Adv anced Features Camera Recor ding Manual Focus Auto Focus may not be able to focus on the subject in the situations shown below . In such situations, set the camcorder to Manual Focus mode and focus manually .
48 Advanced Features 7 Press d or y ( 1 ) to f ocus on the subject, then press e ( 2 ). 8 Press e . 9 Press the MENU/DISPLA Y button to turn off the menu screen. • “MF” is displayed. Manual focus indicator T o cancel Manual Focus mode After perfor ming step 4 above, select “AUTO”, then press e .
49 Adv anced Features Camera Recording Advanced Features 1/10,000 sec. 1/4,000 sec. 1/2,000 sec. 1/1,000 sec. 1/500 sec. 1/250 sec. 1/100 sec. 1/60 sec. V ariable Setting the Shutter Speed The shutter speed is preset to auto mode, which automatically chooses the optimal shutter speed for the ambient light.
50 Advanced Features Recommended Shutter Speeds The faster the shutter speed, the darker the picture becomes. Select the most appr opriate shutter speed for the ambient light.
51 Adv anced Features Camera Recording Advanced Features Manual Exposure The camcorder is pr eset to Auto Exposure mode, which automatically chooses the optimal aperture. When there is too much contrast in brightness between the subject and back- ground, however , you may not be able to recor d a clear image.
52 Advanced Features W/B button White Balance Loc k The color of the subject on the screen tends to look differ ent depending on the lighting condition. The camcorder is pr eset to Auto White Balance mode, which automatically adjusts the hue of the picture for the curr ent lighting condition.
53 Adv anced Features Camera Recording Advanced Features Digital Picture Effects These digital picture ef fects let you recor d the subject with a more dramatic ef fect. T ype of Digital Picture Effects B/W: T o record in black-and-white. SEPIA: T o record in sepia color similar to that of an old photograph.
54 Advanced Features Scene setting indicator Scene Menu (Pr ogram AE) Y ou can set the camcorder to the shooting mode that will create the best r esults for a specific situation.
55 Adv anced Features Camera Recording Advanced Features Mounting hole Using the Zoom Micr ophone (Optional Accessory) With the optional zoom microphone, you can recor d audio according to the magnification of the zoom lens for producing the optimum sound.
56 Advanced Features Windbreak The windbreak function allows you to r educe annoying noise from str ong winds when recor ding. 1 Set the camcorder to T APE-CAMERA mode. 2 Press the MENU/DISPLA Y button until the menu screen appears. 3 Select U , then press r on the Opera- tion b utton.
57 Adv anced Features Camera Recording Advanced Features Time Zone Chart W orld Clock The world clock function allows you to easily adjust the clock to the local time when you use the camcorder while travelling anywher e around the world. • Set the area, date and time for your home time zone if they have not already been set (see page 15).
58 Advanced Features Area T able Area name LONDON P ARIS CAIRO MOSCOW DUBAI KARACHI DACCA BANGKOK HNGKNG TOKYO SYDNEY SOLOMON WLLNGTN SAMOA HA WAII ANCHRGE L.
59 Adv anced Features Camera Recording Advanced Features Daylight saving time indicator Selecting Da ylight Saving Time Perfor m the procedur e below to advance the clock of the camcorder one hour to daylight saving time. 1 Set the camcorder to T APE-CAMERA or CARD-CAMERA mode.
60 Advanced Features Pla yback Zoom The playback zoom function allows you to magnify the playback picture up to 10 times its original size and to shift the magnified picture by using the remote contr ol (see pages 43 and 44 for use of the remote contr ol).
61 Adv anced Features Playbac k Advanced Features GAMMA/BRIGHTER button Gamma Playbac k The gamma playback function improves the playback picture in T APE-VCR mode by increasing the brightness of the subject while leaving the brighter portions of the image unaffected.
62 Advanced Features Pla ybac k Effects Playback effects can be used to cr eate an interesting scene transition between a still image and the following image during play- back in T APE-VCR mode. T ype of Playbac k Effects O VERLAP: A still image fades out as the next image fades in, replacing the pr evious image.
63 Adv anced Features Playbac k Advanced Features Picture Effect Pla yback These picture ef fects let you play back images with a more dramatic ef fect. T ype of Picture Effects B/W: The picture is displayed in black-and- white. SEPIA: The picture is displayed in sepia color similar to that of an old photograph.
64 Advanced Features Darker Brighter Picture/Bac klight Adjustments If the picture is dif ficult to see due to ambient lighting or other factors, adjust the monitor picture settings. Adjusting the Picture 1 Press the MENU/DISPLA Y button until the menu screen appears.
65 Adv anced Features Playbac k Advanced Features Recording Editing Video editing lets you r efine your videos by removing unwanted sequences fr om your tape, or transposing one sequence with another . This camcorder lets you monitor the sour ce program on the built-in LCD monitor without having to connect it to an external TV or video monitor .
66 Advanced Features Recor ding from an External Source Y ou can use this camcorder to recor d or edit videos from another sour ce, such as a VCR, TV , or video disc player . Connect the camcorder to the sour ce equip- ment with the supplied audio/video cable, as shown.
67 Adv anced Features Playbac k Advanced Features Video equipment with DV terminal (e.g. DV camcorder) Editing with the D V T erminal (IEEE1394) This camcorder enables you to perform digital video editing. Connect the camcorder to video equipment with a DV terminal using a commer - cially available DV cable.
68 Advanced Features A udio Dubbing Feature Y ou can add narration to recordings made with this camcorder , while preserving the original audio and video recor dings. Microphone f or Audio Dubbing Y ou can use the built-in stereo microphone to recor d narration.
69 Adv anced Features Playbac k Advanced Features A udio Dubbing 1 Pla y back the recorded Mini D V cassette and locate the tape position where y ou wish to star t audio dubbing. 2 Press y to pause pla yback. 3 Press the MENU/DISPLA Y button until the menu screen appears.
70 Advanced Features Selecting the A udio Playbac k Mode Y ou can select any of the following audio playback modes. A udio 1+2 • 12-bit recor ding in stereo (Audio 1 and Audio 2 channels) • 16-bit.
71 Adv anced Features Playbac k Advanced Features Configuring Software f or PC Connection This camcorder can transfer still playback images in T APE-VCR mode or still images in T APE-CAMERA and CARD modes to a personal computer by using the supplied Video Capture Softwar e.
72 Advanced Features Using the Software For tips on how to use the Video Captur e Software, r efer to the operation manual located on the CD-ROM in PDF format. Follow the steps below to open the PDF file containing the manual. Installing Adobe Acr obat Reader Adobe Acrobat Reader 4.
73 SmartMedia Card Features Camera Recording SmartMedia Card Features Inserting and Removing a SmartMedia Card (Commerciall y av ailable) Inserting a Smar tMedia Card 1 Make sure that the P ower switch is set to OFF . Smar tMedia Car d Features Camera Recor ding Card slot cover 2 Open the LCD monitor .
74 SmartMedia Card Features Card Recor ding It is possible to take a still picture in the same way as you do with a standard camera and recor d that image on the SmartMedia card (commercially available). 1 Inser t a Smar tMedia card into the camcorder .
75 SmartMedia Card Features Camera Recording SmartMedia Card Features Selecting the Picture Resolution The picture quality of still images r ecorded on the SmartMedia card depends on the resolu- tion setting. Select the appropriate setting to match the purpose of recor ding.
76 SmartMedia Card Features Self-timer operating indicator Recor ding with the Self-timer The self-timer function allows you to recor d images after a time-lag of 10 seconds. This is convenient when you want to recor d an image of you and your friends together .
77 SmartMedia Card Features Camera Recording SmartMedia Card Features Formatting a SmartMedia Card In order to use a commer cially available SmartMedia card with this camcorder , format- ting is necessary before its first use.
78 SmartMedia Card Features Card Pla yback It is possible to play back and view still images recor ded on a SmartMedia card on the LCD monitor . Media Selection switch Smar tMedia Car d Features Pla yback Power switch Operation button 1 Open the LCD monitor and adjust the angle.
79 SmartMedia Card Features Playbac k SmartMedia Card Features Slide Show Pla yback It is possible to automatically play back consecutive still images recor ded on a SmartMedia card at intervals of 5 seconds. This is useful when confirming the data recor ded on a SmartMedia card.
80 SmartMedia Card Features Delete-protection indicator Delete-pr otection It is possible to prevent your important images recor ded on the SmartMedia card from being accidentally erased. 1 In CARD-VCR mode, press the MENU/ DISPLA Y b utton until the menu screen appears.
81 SmartMedia Card Features Playbac k SmartMedia Card Features Deleting One Stored Image Y ou can delete unwanted images to free up memory of a Smar tMedia car d for new images. Note: • Deleted images cannot be restor ed. Check whether or not you want the images before perfor ming the pr ocedure below .
82 SmartMedia Card Features Deleting All Stored Images Y ou can delete all images stored on a SmartMedia card in one operation. Notes: • Deleted images cannot be restor ed. Check whether or not you want the images before perfor ming the pr ocedure below .
83 SmartMedia Card Features Playbac k SmartMedia Card Features Print Or der The print order function allows you to add print information called DPOF to still images recor ded on a SmartMedia card. Number of printouts About DPOF DPOF is an abbreviation of “ Digital Print Or der Format ” .
84 SmartMedia Card Features 6 Press y to set the print order , then press d . • The M indicator appears. • If you want to assign another print order , repeat steps 4 to 6. 7 Press d , then press the MENU/ DISPLA Y b utton to tur n off the menu screen.
85 SmartMedia Card Features Playbac k SmartMedia Card Features Folder of still images T ransferring the Data on a SmartMedia Card to a Computer In addition to using the supplied PC connect- ing cable, it is possible to directly transfer still images on the SmartMedia card by using a commercially available floppy disk adapter or PC card adapter .
86 Appendix Position the subject in the center . Focus manually when you need to position the subject off center (see pages 47 and 48). Light from behind Backlighting Appendix Useful Information Hints for Better Shooting • Position the subject in the center of the scene.
87 Appendix Appendix D V T echnology Digital video, DV , is a revolutionary technology that enables recor ding and playback of high quality images with the use of special digital features pr eviously unavailable with conven- tional analog formats.
88 Appendix Mini D V Cassette Precautions when using a Mini D V cassette • Be sure to use only Mini D V cassettes with the i mark. • This camcorder can recor d and play back using Mini D V cassettes with cassette memory , b ut it cannot record or play bac k this memory .
89 Appendix Appendix SmartMedia™ Card Contact area • The contact area shows har dware connec- tions. • Be careful not to scratch the contact ar ea. • Do not touch or allow dirt or foreign matter to attach to the contact area. If the contact ar ea becomes dirty , gently wipe with a soft, dry cloth.
90 Appendix Battery Pac k This camcorder uses a lithium-ion type battery pack. Charging • Charge the battery pack immediately (or a day) before use. The battery pack gradually self-discharges even if stored in a fully charged state. • Charge the battery pack between 50 ° F and 86 ° F (10 ° C and 30 ° C).
91 Appendix Appendix A C Adapter/Batter y Charger • The AC adapter/battery charger may inter fer e with reception if used near a radio. • Prevent flammables, liquids, and metal objects from entering the adapter/charger . • The adapter/charger is a sealed unit.
92 Appendix Dir ty Video Heads Using the camcorder when the video tape is dirty may cause the heads to clog, producing noise on the recor ded image or preventing the image from being r ecorded at all. If the video heads become clogged, the v indicator appears on the screen.
93 Appendix Appendix Demonstration Mode Y ou can watch a brief demonstration of the special camcorder featur es in Demo mode. If the demonstration appears on the screen when you turn on the camcorder for the first time, cancel the Demo mode to use your camcorder .
94 Appendix Bef ore Requesting Service Before calling for service, please check the following tr oubleshooting table. P ower Recording mode Playbac k mode Symptom No power . REC ST ART/STOP button does not work. Power suddenly turns off. Auto focus does not work.
95 Appendix Appendix Playbac k mode Car d mode General Symptom Cannot play back, rewind or fast forward tape. Video noise in image. Cannot delete image on SmartMedia card. Cannot format Smar tMedia car d. Cassette will not eject. Viewfinder picture is hard to see.
96 Appendix Specifications Camcorder Signal System: NTSC standard Recording System: 2 r otar y heads, helical scanning system Cassette: Digital VCR Mini DV video cassette Recording/Playback Time: 90 minutes (DVM60, LP mode) T ape Speed: SP mode: 18.812 mm/second LP mode: 12.
97 CA UTION RISK OF ELECTRIC SHOCK DO NO T OPEN Información importante para los consumidores de los EE.UU . AD VERTENCIA: P ARA REDUCIR EL RIESGO DE CA USAR UN INCENDIO O RECIBIR UNA DESCARGA ELÉCTRICA, NO EXPONGA ESTE AP ARA TO A LA LLUVIA NI A LA HUMED AD .
98 • Cuando no utilice la videoc á mara, no se olvide de extraer el videocasete, desconectar la alimentaci ó n y desenchufar la videoc á mara de la fuente de alimentaci ó n.
99 por lo tanto, é stas no deber á n taparse. Las aberturas no deber á n taparse nunca colocando el producto en una cama, sof á , alfombra u otras superficies similares.
100 Notas acerca de la utilizaci ó n de la pila de litio CAMBIE S Ó LO LA PILA POR OTRA DEL TIPO CR2025 F ABRICADA POR TOSHIBA, MA TSUSHIT A O HIT ACHI MAXELL. LA UTILIZACI Ó N DE UNA PILA DIFERENTE PUEDE CAUSAR UN RIESGO DE INCENDIO O EXPLOSI Ó N.
101 Gu í a de operaci ó n r á pida en espa ñ ol Carga de la bater í a 1 Conecte el cable de alimentación suministrado al zócalo de alimentación de CA del adaptador de CA/cargador de baterías, y enchuf e la clavija de CA en una toma de corriente.
102 SAVE REC SAVE REC Inserci ó n de un minivideocasete D V 1 Coloque la fuente de alimentaci ó n en la videoc á mara, y luego deslice el control de aber tura de la puerta del compartimento del videocasete y abra la puer ta del compar timento del videocasete.
103 Gu í a de operaci ó n r á pida en espa ñ ol Bot ó n de abertura del monitor LCD (OPEN) 90 AU DIO 12 + AU DIO 12 + Grabaci ó n f á cil con la videoc á mara en una cinta 1 Aseg ú rese de que se encuentre inser tado un casete. 5 Pulse el bot ó n REC ST ART/ST OP para iniciar la grabaci ó n.
104 Grabaci ó n con tarjeta 1 Aseg ú rese de que se encuentre inser tado una tarjeta Smar tMedia (disponible en el comercio). Bot ó n de bloqueo Reproducci ó n de tarjeta 1 Pulse el bot ó n de aber tura del monitor LCD (OPEN) ( 1 ) y abra el monitor LCD de manera que f orme un á ngulo de 90 ° con el cuerpo de la videoc á mara ( 2 ).
105 On-screen Displa ys in Other Language Cuando se selecciona “ ESP A Ñ OL ” como idioma de la visualizaci ó n en pantalla aparecen las siguientes visualizaciones indicadas a continuaci ó n. Visualizaciones en pantalla en espa ñ ol AUTO M. AUTO M.
106 TARJ M EN Ú AUT OD I S PA. E SCE. DI S EN FO. M A N U. EXPOS I C I Ó N VEL. OBT U RA EF. IM A G EN A J UST E MA N. M ODO G R A B A EF. I NS T A N. ZO O M DI G I . AJ U ST E C Á MA FO R M ATO RE M OTO SO N I DO M ODO D EMO . ID IO M A OTR OS LU Z FO ND O BR I L L O LCD COLOR LCD M AT I Z BR I L L O LC D VI S U A LI.
107 On-screen Displa ys in Other Language Les affichages sur é cran suivants apparaissent lorsque “ FRAN Ç AIS ” est s é lectionn é pour la langue de l ’ affichage.
108 AUTO CARTE C ARTE AUTO CARTE 3 6 2 5 1 4 PRE S. D I A PO IM A GE M EN U EFFACER PROTGE R ORD. I M P RE S EFFACER TT RE GL E . L EC T RE TARD A T. SON AF F I CH AGE M OD E ENR EG ME NU 90 0 90 0 1 1 NOR MA L 100 0 00 6 - NOR MAL 2 1 M EN U RE TARD AT.
VL-WD255U/hyou; 00/12/26/18:00 LIQUID CR Y ST AL DISPLA Y CAMCORDER OPERATION MANUAL MODEL VL-WD255U Important Model No.: Serial No.: Please read this operation manual carefully before using the VIEWCAM.
Ein wichtiger Punkt beim Kauf des Geräts Sharp VL-WD255U (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sharp VL-WD255U noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sharp VL-WD255U - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sharp VL-WD255U reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sharp VL-WD255U erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sharp VL-WD255U besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sharp VL-WD255U verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sharp VL-WD255U. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sharp VL-WD255U gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
