DE
Sharp logo
Offizielle Bedienungsanleitung

Sharp PN-S655

112 Seiten·7.5 MB·Kfz-Videosystem·PDF·ENITNLJA
Sharp PN-S655
Inhaltsverzeichnis 52 Abschnitte ENGLISH DEUTSCH FRANÇAIS ESPAÑOL 汉语 РУССКИЙ · PN-S655 · LCD MONITOR LCD FARBMONITOR MONITEUR LCD MONITOR LCD ЖК МОНИТОР 液晶显示器 · U.S.A. ONLY · … AnzeigenAusblenden
Page 1 of the Sharp PN-S655 user manual — ENGLISH DEUTSCH FRANÇAIS ESPAÑOL 汉语 РУССКИЙ
Seite 1 · Zum Vergrößern klicken
Seite 1

ENGLISH DEUTSCH FRANÇAIS ESPAÑOL 汉语 РУССКИЙ

PN-S655

LCD MONITOR LCD FARBMONITOR MONITEUR LCD MONITOR LCD ЖК МОНИТОР 液晶显示器

OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D’EMPLOI MANUAL DE INSTRUCCIONES РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ 使用说明书

ENGLISH E1 DEUTSCH D1 FRANÇAIS F1 ESPAÑOL S1 РУССКИЙ Р1 汉语 C1

Page 2 of the Sharp PN-S655 user manual — SHARP ELECTRONICS (Europe) GmbH
Seite 2 · Zum Vergrößern klicken
Seite 2

Model No.:

Serial No.:

U.S.A. ONLY

FOR CUSTOMERS IN U.K.

GREEN-AND-YELLOW : Earth BLUE : Neutral BROWN : Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

  • The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth or coloured green or green-and-yellow.
  • The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black.
  • The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red. Ensure that your equipment is connected correctly. If you are in any doubt consult a qualified electrician.

“WARNING: THIS APPARATUS MUST BE EARTHED.”

Authorised representative responsible for the European Union Community Market Autorisierter Repräsentant in der Europäischen Union Représentant autorisé pour le marché de la communauté européenne Representante autorizado responsable del mercado comunitario de la Unión Europea

SHARP ELECTRONICS (Europe) GmbH

Sonninstraße 3, D-20097 Hamburg

Page 3 of the Sharp PN-S655 user manual — CAUTION: TO REDUCE THE RISK OF ELECTRIC
Seite 3 · Zum Vergrößern klicken
Seite 3

PN-S655

LCD MONITOR

IMPORTANT INFORMATION

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This product utilizes fluorescent tubes containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities.

Page 4 of the Sharp PN-S655 user manual — U.S.A. ONLY
Seite 4 · Zum Vergrößern klicken
Seite 4

IMPORTANT INFORMATION (Continued)

NOTE: This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities, the Electronics Industries Alliance: www.eiae.org the lamp recycling organization: www.lamprecycle.org or Sharp at 1-800-BE-SHARP (For U.S.A. Only)

U.S.A. ONLY

A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dustbin!

Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one.

*) Please contact your local authority for further details.

If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand according to local requirements.

By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.

2. In other Countries outside the EU If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.

For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you don’t purchase a new product. Further collection facilities are listed on the homepage of www.swico.ch or www.sens.ch

B. Information on Disposal for Business Users 1. In the European Union If the product is used for business purposes and you want to discard it:

Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection facilities.

For Spain: Please contact the established collection system or your local authority for take-back of your used products.

2. In other Countries outside the EU If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal.
Page 5 of the Sharp PN-S655 user manual — SAFETY PRECAUTIONS
Seite 5 · Zum Vergrößern klicken
Seite 5

IMPORTANT INFORMATION (Continued)

The battery supplied with this product contains traces of Lead. For EU:

The crossed-out wheeled bin implies that used batteries should not be put to the general household waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in accordance with legislation. Please contact your local authority for details on the collection and recycling schemes. For Switzerland:

The used battery is to be returned to the selling point. For other non-EU countries:

Please contact your local authority for correct method of disposal of the used battery.

DEAR SHARP CUSTOMER

Thank you for your purchase of a SHARP LCD product. To ensure safety and many years of trouble-free operation of your product, please read the Safety Precautions carefully before using this product.

SAFETY PRECAUTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions — All operating instructions must be read and understood before the product is operated.

2. Keep this manual in a safe place — These safety and operating instructions must be kept in a safe place for future

reference. 3. Observe warnings — All warnings on the product and in the instructions must be observed closely. 4. Follow instructions — All operating instructions must be followed. 5. Cleaning — Unplug the power cord from the AC outlet before cleaning the product. Use a dry cloth to clean the product. Do

not use liquid cleaners or aerosol cleaners. 6. Attachments — Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can result

in accidents. 7. Water and moisture — Do not use the product near water. Do not install the product in a place where water may splash onto

it. Be careful of equipment which drains water such as an air-conditioner. 8. Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life

of the product. Do not place the product on a sofa, rug or other similar surface, since they can block ventilation openings. Do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed. 9. Power cord protection — The power cords must be routed properly to prevent people from stepping on them or objects from

resting on them. 10. The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with

impact. Be careful not to be injured by broken glass pieces in case the LCD panel breaks. 11. Overloading — Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock. 12. Entering of objects and liquids — Never insert an object into the product through vents or openings. High voltage flows in

the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not spill water or liquid on the product. 13. Servicing — Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other

Page 6 of the Sharp PN-S655 user manual — SAFETY PRECAUTIONS (Continued)
Seite 6 · Zum Vergrößern klicken
Seite 6

SAFETY PRECAUTIONS (Continued)

14. Repair — If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service

person to perform repairs. a. When the power cord or plug is damaged. b. When a liquid was spilled on the product or when objects have fallen into the product. c. When the product has been exposed to rain or water. d. When the product does not operate properly as described in the operating instructions. Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician. e. When the product has been dropped or damaged. f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product

needs servicing. 15. Replacement parts — In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger. 16. Safety checks — Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the product is in proper operating condition. 17. Wall mounting — When mounting the product on a wall, be sure to install the product according to the method

recommended by the manufacturer. 18. Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating

  • products (including amplifiers). 19. Batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment, dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below:
  • Use the specified batteries only.
  • Install the batteries with due attention to the plus (+) and minus (-) sides of the batteries according to the instructions in the
  • compartment.
  • Do not mix old and new batteries.
  • Do not mix batteries of different types. Voltage specifications of batteries of the same shape may vary.
  • Replace an exhausted battery with a new one promptly.
  • If you will not use the remote control for a long time, remove the batteries.
  • If leaked battery fluid gets on your skin or clothing, rinse immediately and thoroughly. If it gets into your eye, bathe your

eye well rather than rubbing and seek medical treatment immediately. Leaked battery fluid that gets into your eye or your clothing may cause a skin irritation or damage your eye. 20. Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury,

severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and missile launch control in a weapon system.

Page 7 of the Sharp PN-S655 user manual — Fluorescent Tubes
Seite 7 · Zum Vergrößern klicken
Seite 7

TIPS AND SAFETY INSTRUCTIONS

The Power Cord

- The TFT color LCD panel used in this monitor is made with

the application of high precision technology. However, there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colors or brightness. Please note that these are not malfunctions but common phenomena of LCDs and will not affect the performance of the monitor.

- Do not damage the power cord nor place heavy objects on

it, stretch it or over bend it. Also, do not add extension cords. Damage to the cord may result in fire or electric shock.

- Use only the power cord supplied with the monitor.

- Insert the power plug directly into the AC outlet.

Adding an extension cord may lead to fire as a result of overheating.

- Do not display a still picture for a long period, as this could

- Do not remove or insert the power plug with wet hands.

cause a residual image.

Doing so could result in electric shock.

- Never rub or tap the monitor with hard objects.

- Please understand that SHARP CORPORATION bears no

- Unplug the power cord if it is not used for a long time.

responsibility for errors made during use by the customer or a third party, nor for any other malfunctions or damage to this product arising during use, except where indemnity liability is recognized under law.

- Do not attempt to repair the power cord if it is broken

or malfunctioning. Refer the servicing to the service representative.

Initialization

- This monitor and its accessories may be upgraded without

advance notice.

- This monitor can remember e-mail addresses and other data.

- Do not use the monitor where there is a lot of dust, where

Before transferring or disposing of this monitor, initialize all settings by executing ALL RESET 1. (See Operation guide.) Executing ALL RESET 2 will not reset e-mail addresses and similar data.

humidity is high, or where the monitor may come into contact with oil or steam, as this could lead to fire.

- Ensure that the monitor does not come into contact with

water or other fluids. Ensure that no objects such as paper clips or pins enter the monitor as this could lead to fire or electric shock.

Manual Scope

- Microsoft, Windows and Internet Explorer are registered

trademarks of Microsoft Corporation.

- Do not place the monitor on top of unstable objects or in

unsafe places. Do not allow the monitor to receive strong shocks or to strongly vibrate. Causing the monitor to fall or topple over may damage it.

- HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of HDMI Licensing LLC.

- Do not use the monitor near heating equipment or in places

- Adobe, Acrobat, and Reader are either registered trademarks

where there is likelihood of high temperature, as this may lead to generation of excessive heat and outbreak of fire.

or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

- This product comes with RICOH Bitmap Fonts produced and

sold by RICOH COMPANY, LTD.

- All other brand and product names are trademarks or

registered trademarks of their respective holders.

- Language of OSD menu used in this manual is English by

way of example.

- Illustrations in this manual may not exactly represent the

actual product or display.

Fluorescent Tubes

  • The fluorescent tubes in this product have a limited lifetime.
  • Because of the property of fluorescent tubes, the screen may flash during the initial period of use. If this happens, please turn off the main power switch of the monitor and turn on again after at least 5 seconds to confirm operation.
Page 8 of the Sharp PN-S655 user manual — TIPS AND SAFETY INSTRUCTIONS
Seite 8 · Zum Vergrößern klicken
Seite 8
Page 8 of the Sharp PN-S655 user manual — TIPS AND SAFETY INSTRUCTIONS
Page 9 of the Sharp PN-S655 user manual — TIPS
Seite 9 · Zum Vergrößern klicken
Seite 9

Supplied Accessories

If any component should be missing, please contact your dealer.

Liquid Crystal Display1
Remote control unit1

Power cord: 1 R-6 battery (“AA” size): 2 CD-ROM (Utility Disk for Windows): 1 Operation manual: 1 Stand hole protection cover: 2

* Sharp Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission. * For environmental protection! Do not dispose of batteries in household waste. Follow the disposal instructions for your area.

Part Names

n Front view

1. LCD panel 2. Remote control sensor (See page 12.) 3. Power LED (See page 14.) 4. Power switch (See page 14.) 5. Input switch (See Operation guide.) 6. Temporary Stand (See page 13.)

TIPS

  • Use a pointed object such as a pen tip to press the switches at the front of the monitor.

2 5 4 3

Page 10 of the Sharp PN-S655 user manual — n Remote control unit
Seite 10 · Zum Vergrößern klicken
Seite 10

Part Names

n Rear view

1. PC/AV output terminal (DVI-D) (See page 11.) 2. PC1 input terminal (DVI-D) (See page 10.) AV1 input terminal (DVI-D) (See page 10.) 3. PC2 input terminal (HDMI) (See page 10.) AV2 input terminal (HDMI) (See page 10.) 4. PC3 input terminal (Mini D-sub 15 pin) (See page 10.) 5. PC4 input terminals (BNC) (See page 10.) 6. AV3 input terminals (BNC) (See page 10.) 7. AV5 input terminal (BNC) (See page 10.) 8. AV4 input terminal (S) (See page 10.) 9. LAN terminal (See page 11.) 10. RS-232C output terminal (D-sub 9 pin) (See page 11.) 11. RS-232C input terminal (D-sub 9 pin) (See page 11.) 12. PC/AV audio output terminals (See page 11.) 13. AV audio input terminals (See page 10.) 14. PC audio input terminal (See page 10.) 15. External speaker terminals (See page 11.) 16. Main power switch (See page 14.) 17. AC input terminal (See page 12.) 18. Handles 19. Vents 20. Hooks

Sharp PN-S655 — Part Names diagram (page 10)
Abb. 1 · Part Names

6 12 13 14 15

n Remote control unit

Sharp PN-S655 — n Remote control unit diagram (page 10)
Abb. 2 · n Remote control unit
1. Signal transmitter 2. POWER button (See page 14.) 3. MUTE button (See Operation guide.) 4. VOL +/- buttons (See Operation guide.) BRIGHT +/- buttons (See Operation guide.) Cursor control ( / / / ) buttons 5. DISPLAY button (See Operation guide.) 6. MODE button (See Operation guide.) 7. INPUT button (See Operation guide.) 8. MENU button (See Operation guide.) 9. SIZE button (See Operation guide.)
Page 11 of the Sharp PN-S655 user manual — How to Install the Monitor
Seite 11 · Zum Vergrößern klicken
Seite 11

How to Install the Monitor

Mounting precautions

  • Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor.
  • When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people.
  • When moving the monitor, be sure to hold it with the handles both on the rear and the unit bottom. Do not hold the LCD panel. This may cause product damage, failure, or injury.
  • Install the monitor with the surface perpendicular to a level surface. If necessary, the monitor may be tilted up to 20 degrees.
  • Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work yourself. Our company will bear no responsibility for accidents or injuries caused by improper mounting or mishandling.
  • This monitor should be used at an ambient temperature between 32°F (0°C) and 104°F (40°C). Provide enough space around the monitor to prevent heat from accumulating inside.
Unitinch [cm]

1-3/8 [3.5]

  • If it is difficult to provide this much space for any reason such as the installation of the monitor inside a housing, or if the ambient temperature may be outside of the range of 32 °F (0°C) to 104°F (40°C), install a fan in the housing or take other measures to keep the ambient temperature within the required range.
  • Do not block any ventilation openings. If the temperature inside the monitor rises, this could lead to a malfunction.
  • After mounting, it is recommended to take some measures to prevent the monitor from falling down. Secure the monitor by fastening the hooks at the top of the monitor to a wall or a pillar with strong cord and brackets (not included).
  • Do not place the monitor on a device which generates heat.
  • This monitor is fixed to the temporary stand when shipped from the factory. Please note that this stand is for temporary use only until the monitor is properly mounted.
  • Be sure to use a stand or a wall-mount bracket designed or designated for mounting the monitor.
  • This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials such as plaster / thin plastic board / wood before starting installation. This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor. Install by the most suitable method for the material and the structure.
Show 4 more labels / short text on this page
11-13/16 [30] · 1- 15/16 [5] · 1- 15/16 [5] · 1-15/16 [5]
Page 12 of the Sharp PN-S655 user manual — TIPS
Seite 12 · Zum Vergrößern klicken
Seite 12
Sharp PN-S655 — How to Install the Monitor diagram (page 12)
Abb. 3 · How to Install the Monitor
  • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ disconnecting cables. Also, read the manual of the equipment to be connected.
  • Be careful not to mix up the input terminal with the output terminal when connecting cables. Mixing up the input and output terminals may cause malfunctions and the other problems.
t Video inputAV1 input terminalAV2 input terminalCr/Pr Y Cb/Pb AV3 input terminals AV4 input terminal AV5 input terminal Audio inpuAV audio input terminals
Video inputPC1 input terminalPC2 input terminal PC3 input terminalV H R G B PC4 input terminals Audio inputPC audio input terminal
  • Use a commercially available signal cable (DVI-D 24 pin) for the AV1 input terminal. Set DVI SELECT of INPUT SELECT on the OPTION menu to AV1 DVI-D when using the AV1 input terminal. (See Operation guide.)
  • Use a commercially available HDMI cable (conforming to the HDMI standard) for the AV2 input terminal. Set HDMI SELECT of INPUT SELECT on the OPTION menu to AV2 HDMI when using the AV2 input terminal. In addition, select the audio input terminal to be used in HDMI AUDIO SELECT of INPUT SELECT on the OPTION menu. (See Operation guide.) When DIGITAL is selected, connection to the AV audio input terminal is unnecessary.
  • Use a commercially available component cable (BNC) for the AV3 input terminals. Set BNC SELECT of INPUT SELECT on the OPTION menu to AV3 COMPONENT when using the AV3 input terminals. (See Operation guide.)
  • Use a commercially available S-video cable for the AV4 input terminal.
  • Use a commercially available video cable (BNC) for the AV5 input terminal.
  • Use a commercially available audio cable (RCA) for the AV audio input terminals.
  • The AV1/AV2 input terminals are compatible with the video signals below:
  • Use a commercially available signal cable (DVI-D 24 pin) for the PC1 input terminal. Set DVI SELECT of INPUT SELECT on the OPTION menu to PC1 DVI-D when using the PC1 input terminal. (See Operation guide.)
  • Use a commercially available HDMI cable (conforming to the HDMI standard) for the PC2 input terminal. Set HDMI SELECT of INPUT SELECT on the OPTION menu to PC2 HDMI when using the PC2 input terminal. In addition, select the audio input terminal to be used in HDMI AUDIO SELECT of INPUT SELECT on the OPTION menu. (See Operation guide.) When DIGITAL is selected, connection to the PC audio input terminal is unnecessary.
  • Use a commercially available signal cable (Mini D-sub 15 pin) for the PC3 input terminal.
  • Use a commercially available signal cable (BNC) for the PC4 input terminals. Set BNC SELECT of INPUT SELECT on the OPTION menu to PC4 RGB when using the PC4 input terminals. (See Operation guide.)
  • Use a commercially available audio cable (mini stereo jack) for the PC audio input terminal. Use an audio cable without resistance.

1920 x 1080 p @ 50/59.94/60 Hz 1920 x 1080 i @ 50/59.94/60 Hz 1280 x 720 p @ 50/59.94/60 Hz 720 x 576 p @ 50 Hz 720 x 480 p @ 59.94/60 Hz 640 x 480 p @ 59.94/60 Hz • The AV2 input terminal is also compatible with the video signals below:

TIPS

1920 x 1080p @ 24Hz 720(1440) x 576i @ 50Hz 720(1440) x 480i @ 59.94/60Hz • The AV3 input terminals are compatible with the video signals below:

  • Images may not be displayed properly depending on the computer (graphics board) to be connected.
  • A screen with 1920 x 1080 resolution may not be displayed correctly on PC4. In this case, check the settings of your computer (graphics board) to verify that input signals conform to specifications of this monitor. (See page 17.)
  • If there is a check box to disable EDID in display control panel, check it when using PC4.
  • Use the automatic screen adjustment when a PC screen is displayed for the first time using PC3 or PC4, or when the setting of the PC is changed. (See Operation guide.) The screen is adjusted automatically when SELF ADJUST in the OPTION menu is set to ON. (See Operation guide.)

1080p @50/60Hz, 1080i @50/60Hz, 720p @50/60Hz, 576p @50Hz, 576i @50Hz, 480p @60Hz, 480i @60Hz

Page 13 of the Sharp PN-S655 user manual — TIPS
Seite 13 · Zum Vergrößern klicken
Seite 13
Sharp PN-S655 — Other terminals diagram (page 13)
Abb. 4 · Other terminals

Other terminals

Connecting multiple monitors

PC/AV audio output terminals

You can connect multiple monitors (up to 5 monitors) in a daisy chain by using the PC1/AV1 input terminals and PC/AV output terminals of this monitor.

  • Audio from the equipment connected to the AV audio input terminals or PC audio input terminal is output. Connect to the audio input terminals of the connected equipment using a commercially available audio cable (RCA).
  • The audio output varies depending on the input mode selection. (See Operation guide.)
  • The volume level can be adjusted using the volume adjustment. (See Operation guide.)
  • Selecting FIXED of “AUDIO OUTPUT” from the OPTION menu fixes the volume of sound output from the audio output terminals. (See Operation guide.)
  • Audio signals output from the PC/AV audio output terminals cannot be adjusted using the AUDIO menu.

First monitor Second monitor

Sharp PN-S655 — Other terminals diagram (page 13)
Abb. 5 · Other terminals

PC/AV output terminals Video signals from PC1 and AV1 can be output to external device. Use this terminal when you connect multiple monitors in a daisy chain via DVI cable (commercially available). (See the description on the right.) Outputting images encoded with HDCP requires an HDCP- compatible external device. Images cannot be output in the following situations: - In PC2/AV2 input mode - When PIP SOURCE in the PIP/PbyP Menu is set to PC2

HDMI or AV2 HDMI

RS-232C input/output terminals You can control the monitor from a PC by connecting a commercially available RS-232 straight cable between this terminal and the PC. (See Operation guide.)

LAN terminal You can control the monitor from a PC on a network by connecting a commercially available LAN cable between this terminal and a network. (See Operation guide.)

Connecting external speakers

TIPS

  • The length of the signal cables or surrounding environment may affect the image quality.
  • The screen may not display properly when using terminals other than PC1/AV1 for the input mode. In this case, turn off the power to all the monitors connected in a daisy chain and then turn the power on again.
  • When connecting monitors in a daisy chain set AUTO INPUT CHANGE to OFF.

Be sure to use external speakers with an impedance of 6 Ω and a rated input of at least 7 W.

Sharp PN-S655 — TIPS diagram (page 13)
Abb. 6
1. While pushing the tab, insert the tip of the cable. 2. Release the tab.

TIPS

  • Be sure to connect the + and - terminals and the left and right speakers properly.
  • Avoid short circuiting the + and - terminals.

Connection example · (1) (2)

Page 14 of the Sharp PN-S655 user manual — TIPS
Seite 14 · Zum Vergrößern klicken
Seite 14

Connecting the Power Cord

  • Do not use a power cord other than the one supplied with the monitor.
1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the AC power outlet.
Sharp PN-S655 — Connecting the Power Cord diagram (page 14)
Abb. 7 · Connecting the Power Cord
Sharp PN-S655 — Connecting the Power Cord diagram (page 14)
Abb. 8 · Connecting the Power Cord

Installing the batteries

Remote control operation range

1. Press the cover gently and slide it in the direction of the arrow.

The operation range of the remote control unit is approx. 16.4 feet (5 m) at an angle of approx 10° from the center to the top/bottom/right/left of the remote control sensor.

Sharp PN-S655 — Installing the batteries diagram (page 14)
Abb. 9 · Installing the batteries
2. See the instructions in the compartment and put in the supplied batteries (R-6 (“AA” size) x 2) with their plus (+) and minus (-) sides oriented correctly. 3. Close the cover.

TIPS

  • Do not expose the remote control unit to shock by dropping or stepping on it. This could lead to a malfunction.
  • Do not expose the remote control unit to liquids, and do not place it in an area with high humidity.
  • The remote control unit may not work properly if the remote control sensor is under direct sunlight or strong lighting.
  • Objects between the remote control unit and the remote control sensor may prevent proper operation.
  • Replace the batteries when they run low as this may shorten the remote control’s operation range.
  • If a fluorescent light is illuminated near the remote control unit, it may interfere with proper operation.
  • Do not use it with the remote control of other equipment such as air conditioner, stereo components, etc.
  • The supplied batteries (R-6 (“AA” size) x 2) may become exhausted faster depending on the storage condition. It is recommended that you replace them with new batteries (commercially available) earlier than specified.
  • If you will not use the remote control for a long time, remove the batteries.
  • Use manganese or alkaline batteries only.
Show 4 more labels / short text on this page
For power outlet · AC input terminal · Power cord (Supplied) · Remote control sensor
Page 15 of the Sharp PN-S655 user manual — Removing the Temporary Stand
Seite 15 · Zum Vergrößern klicken
Seite 15

Removing the Temporary Stand

Prepare wall-hanging brackets or a stand to mount the monitor unit. Read the manual for the brackets or stand for the proper mounting procedure. (The screw holes for mounting brackets (M10 x 4 holes) are provided on the rear of the monitor.)

  • The monitor is heavy. Make sure to handle the monitor with at least 2 people.
  • This monitor is fixed to the temporary stand when shipped from the factory. Please note that this stand is for temporary use only until the monitor is properly mounted.
  • The temporary stand is specifically designed for this monitor. Do not use for other devices.
1. Hold the monitor with the handles to prevent it from falling down, and remove the stand fixing screws (4).
2. Lift the monitor by holding it with the handles and the underside of the unit.
3. When the installation is complete, attach the included stand hole protection covers, using the supplied screws. (1) Fold the sheet perpendicularly with the

adhesive side inward. (2) Remove the adhesive cover and attach the

sheet to the monitor.

Screws Screws

Page 16 of the Sharp PN-S655 user manual — Disabling power on/off operations
Seite 16 · Zum Vergrößern klicken
Seite 16

Turning Power On/Off

TIPS

  • Turn on the monitor first before turning on the PC or playback device.
  • If the monitor is in the input signal standby mode and you press the POWER button on the remote control unit, the monitor enters standby mode.
  • You can turn on/off the monitor by pressing the power switch of the monitor.
  • Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode.
  • When STANDBY MODE is set to STANDARD, startup time can be reduced. Note, however that, more power will be consumed in standby mode.

Turning on the main power

Sharp PN-S655 — Turning on the main power diagram (page 16)
Abb. 10 · Turning on the main power

n Date/time setting

  • If the time has yet to be set when the monitor is first turned on, the date/time setting screen appears. Set the date and time.
Sharp PN-S655 — n Date/time setting diagram (page 16)
Abb. 11 · n Date/time setting

When the main power switch is off, the monitor cannot be turned on using the POWER button on the remote control unit.

Turning power on/off

Press the POWER button to turn the power ON/OFF.

Sharp PN-S655 — Turning power on/off diagram (page 16)
Abb. 12 · Turning power on/off
  • 1. Press , , or to select the date and time, and press or to change the numerical values. 2. Select SET and then press MENU .
  • Be sure to set the date and time.
  • The date/time setting screen will close automatically if no operation is performed for about 15 seconds. The date and time can be set using DATE/TIME SETTING from the OPTION menu when the date/time setting screen disappears.

TIPS

Status of a power LED Status of the monitor Green lighting Power “On” Orange lighting Power “Off” (Standby mode)

  • Set the date in “Year/Month/Day” order.
  • Set the time on a 24-hour basis.
  • The clock stops after the power-off status continues for approximately 1 week.* The date/time setting screen appears at power-on. Be sure to set the date and time. ( * This is a guide. The power-off status that stops the clock

Green flashing Input signal standby mode (input using a PC)

depends on the status of the monitor.)

  • When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. A short interval may result in a malfunction.

Disabling power on/off operations

Power on/power off operations can be disabled in order to protect the monitor from an accidental power off. Set the ADJUSTMENT LOCK in FUNCTION menu to “2”. (See Operation guide.)

Page 17 of the Sharp PN-S655 user manual — Troubleshooting
Seite 17 · Zum Vergrößern klicken
Seite 17

Troubleshooting

Before calling for repair services, make sure following checks for possible remedies to the encountered symptoms.

PC4 or AV3 does not appear properly.

  • Is the setting of BNC SELECT correct? (See Operation guide.)
  • Is the input signal compatible with this monitor? (See pages 10 and 17.)

There is no picture or sound.

  • Is the power cord disconnected? (See page 12.)
  • Is the main power switch set to “OFF”? (See page 14.)
  • Is the monitor in standby mode (the power LED illuminating in orange)? (See page 14.)
  • Make sure correct input mode is selected. (See Operation guide.)
  • If any external equipment is connected, make sure the equipment is operating (playing back).

Control buttons do not work. There is no picture.

  • Some kind of load noises from outside might interfere with normal operation. Turn off the power and turn it on after waiting at least 5 seconds, and then check the operation.

The input mode changes automatically.

  • When the AUTO INPUT CHANGE is ON and no signal is present in a selected input mode, the AUTO INPUT CHANGE automatically changes the selected mode to a mode where a video signal is present. The input mode may change in the following cases: - When a computer is in standby mode. - When video play is stopped with a playback device.

Remote control does not work.

  • Are the batteries inserted with polarity (+,-) aligned? (See page 12.)
  • Are the batteries exhausted? (See page 12.)
  • Point the remote control unit toward the monitor’s remote control sensor. (See page 12.)
  • Is the menu display hidden or is operation disabled? (See Operation guide.)

Power LED flashes red. “STATUS [xxxx]” appears in the corner of the screen.

  • Hardware has a problem. Turn off the monitor and request repair from your SHARP dealer. (When STATUS ALERT is set to OSD & LED. This varies depending on the setting.)

Sound from left and right speakers is reversed. Sound is heard from only one side.

  • Are audio cables connected properly? (See pages 10 and 11.)
  • Make sure audio cables for external speakers are connected properly: left and right cables may be reversed or one of the two cables may not be connected. (See page 11.)
  • Check the setting of BALANCE for AUDIO menu. (See Operation guide.)

When “AUTO DIMMING” is displayed.

  • When the internal temperature of the monitor rises excessively, the brightness of the backlight automatically decreases in order to prevent a further temperature rise. If you attempt to use to adjust the brightness while the monitor is in this state, “AUTO DIMMING” is displayed and you cannot change the brightness.
  • Remove the cause of the excessive temperature rise.

There is a picture but no sound.

  • Is the sound muted?
  • Make sure the volume is not set to minimum.
  • Is the PC audio cable (commercially available) connected?
  • Are audio cables connected properly?
  • Is the audio signal input properly to the audio input terminal corresponding to the selected video input terminal?
  • When PC2 or AV2 is used, is the setting of HDMI AUDIO SELECT correct? (See Operation guide.)

The monitor sometimes makes a cracking sound.

  • You may hear cracking sound from the monitor. This happens when the cabinet slightly expands and contracts according to change in temperature. This does not affect the monitor’s performance.

The Power LED is flashing in red and green alternately. When “TEMPERATURE” is displayed in the corner of the screen.

Unstable video.

  • The signal may be incompatible.
  • Try the automatic screen adjustment when the PC3 input terminal or PC4 input terminals is used.
  • When the internal temperature of the monitor rises excessively, the brightness of the backlight decreases automatically in order to prevent high-temperaturerelated problems. When this occurs, “TEMPERATURE” is displayed on the screen and the Power LED flashes red and green alternately. (When TEMPERATURE ALERT is set to OSD & LED. This varies depending on the setting.)
  • If the internal temperature rises further, the monitor automatically enters standby mode. (The Power LED continues flashing red and green alternately.)
  • Remove the cause of the excessive temperature rise. - If the monitor enters standby mode due to a rise in

PC1 or AV1 does not appear properly.

  • Is the setting of DVI SELECT correct? (See Operation guide.)
  • Is the input signal compatible with this monitor? (See pages 10 and 17.)
  • Turn off the power to the connected equipment and then turn the power on again.
  • If the monitors are connected in a daisy chain, turn off the power to all the monitors connected in a daisy chain and then turn the power on again.

temperature, to return to normal display, turn the power switch off and then back on again. The monitor, however, will enter standby mode again if the cause of the temperature rise is not eliminated. (See page 9.) - Check whether the monitor is placed at a location where

PC2 or AV2 does not appear properly.

  • Is the setting of HDMI SELECT correct? (See Operation guide.)
  • Is the HDMI cable HDMI standard compliant? The monitor will not work with cables that are not standard compliant.
  • Is the input signal compatible with this monitor? (See pages 10 and 17.)

a quick rise in temperature is likely. Internal temperature rises quickly if the vents on the monitor are blocked. - Internal temperature rises quickly if dust accumulates

inside the monitor or around the vents. Remove dust if possible. Ask Sharp dealer about removing internal dust.

Page 18 of the Sharp PN-S655 user manual — n Product Specifications
Seite 18 · Zum Vergrößern klicken
Seite 18

Specifications

n Product Specifications

Model PN-S655 LCD element 65" wide (163.9 cm diagonal) ASV low-reflection black TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors 16.77 M colors (8 bits/color) Pixel pitch 0.744 mm (H) x 0.744 mm (V) Viewing angle 176° right/left/up/down (contrast ratio ≥ 10) Screen active area inch (mm) 56-1/4 x 31-5/8 (1428 x 804) Computer input signal Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75 Ω] Sync signal Horizontal/vertical separate (TTL: positive/negative), Sync-on-green, Composite sync (TTL: positive/negative) Video color system PAL, PAL-60, SECAM, NTSC (3.58 MHz), NTSC (4.43 MHz) Plug and play VESA DDC2B Power management VESA DPMS, DVI DMPM Input terminals PC/AV Digital DVI-D 24 pin (HDCP compatible) x 1 HDMI x 1 PC Analog Mini D-sub 15 pin, 3 rows x 1 BNC *1*2 x 1 Audio 3.5 mm mini stereo jack x 1 AV Composite video BNC x 1 S-video x 1 Component BNC (Y, Cb/Pb, Cr/Pr)*1 x 1 Audio RCA pin (L/R) x 1 Serial (RS-232C) D-sub 9 pin x 1 Output terminals PC/AV Digital DVI-D 24 pin x 1 Audio RCA pin (L/R) x 1 Serial (RS-232C) D-sub 9 pin x 1 Speaker 7 W + 7 W [6 Ω] LAN terminal 10 BASE-T/100 BASE-TX Power requirement AC 100 V - 240 V, 50/60 Hz Operating temperature 32°F to 104°F (0°C to 40°C) Operating humidity 20% to 80% (no condensation) Power consumption 480 W (Input signal waiting mode: 14 W *3, Standby mode: 2.0 W *4) Dimensions inch (mm) Approx. 61-7/8 x 4-15/16 x 36-5/16 (1,572 x 126 x 923) (excluding protrusions) Weight lbs. (kg) Approx. 136.7 (62) (excluding the temporary stand)

*1 Cannot be used simultaneously. *2 Does not support plug and play. *3 When AUTO INPUT CHANGE is set to OFF. *4 When STANDBY MODE is set to LOW POWER, LAN and SCHEDULE are not used. When STANDBY MODE is set to STANDARD, 14W.

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

nPower management This monitor conforms to VESA DPMS and DVI DMPM. Both your video card and computer must support the same standard in order for the monitor’s power management function to work.

DPMSDisplay Power Management Signaling
Sharp PN-S655 — n Product Specifications diagram (page 18)
Abb. 13 · n Product Specifications
DMPMDigital Monitor Power Management

DMPM Screen Power consumption

Monitor ON Display 480 W

Active OFF No display 14 W*

* When AUTO INPUT CHANGE is set to OFF.

Page 19 of the Sharp PN-S655 user manual — DVI(PC1) HDMI(PC2)
Seite 19 · Zum Vergrößern klicken
Seite 19

Specifications

n Dimensional Drawings

Unitinch [mm] 61-7/8 [1572]

4-15/16 [126] 1/4 [7]

3-3/8 [85] 3-3/8 [85]

33-7/8 [860] 13/16 [20]

Opening width (56-3/8 [1432])

Screw holes for mounting brackets

(M10 x 4 holes)

When mounting the monitor, read the manual of the brackets or stand for their mounting procedure. The screw holes for mounting brackets (M10 x 4 holes) are provided on the rear of the monitor. Note that screw hole depth of the monitor is 13/16 inch (20 mm). Loose holding may cause the product to fall, resulting in serious personal injuries as well as damage to the product. The screw and hole should come together with over 3/8 inch (10 mm) length of thread. Use the bracket which applied UL1678 standard, and which can endure at least 4 times or more the weight of the monitor.

n Compatible signal timing (PC)

Screen resolution Hsync Vsync Dot frequency Digital

DVI(PC1) HDMI(PC2)

VESA Wide US TEXT Sun

640 × 480 800 × 600 848 × 480 1024 × 768 1152 × 864 1280 × 768 1280 × 960 1280 × 1024 1360 × 768 1400 × 1050 1600 × 1200*1

31.5kHz 37.9kHz 37.5kHz 35.1kHz 37.9kHz 48.1kHz 46.9kHz 31.0kHz 48.4kHz 56.5kHz 60.0kHz 67.5kHz 47.8kHz 60.3kHz 60.0kHz 64.0kHz 80.0kHz 47.7kHz 65.3kHz 75.0kHz 65.3kHz 74.0kHz 44.7kHz 66.3kHz 67.5kHz 31.5kHz 48.3kHz 53.6kHz 56.6kHz 61.8kHz 71.8kHz 71.7kHz 81.1kHz 68.6kHz

60Hz 72Hz 75Hz 56Hz 60Hz 72Hz 75Hz 60Hz 60Hz 70Hz 75Hz 75Hz 60Hz 75Hz 60Hz 60Hz 75Hz 60Hz 70Hz 60Hz 66Hz 70Hz 66Hz 76.2Hz 67.2Hz 76Hz 66Hz

25.175MHz 31.5MHz 31.5MHz 36.0MHz 40.0MHz 50.0MHz 49.5MHz 33.75MHz 65.0MHz 75.0MHz 78.75MHz 108.0MHz 79.5MHz 102.25MHz 108.0MHz 108.0MHz 135.0MHz 85.5MHz 121.75MHz 162.0MHz 146.25MHz 154.0MHz 74.4MHz 148.5MHz 148.5MHz 28.3MHz 64.13MHz 70.4MHz 74.25MHz 94.88MHz 108.23MHz 117.01MHz 134.99MHz 135.76MHz

Yes

- Yes

- Yes Yes Yes

- Yes

- - Yes

1680 × 1050 1920 × 1200*1

1280 × 720 1920 × 1080 720 × 400 1024 × 768 1152 × 900 1280 × 1024 1600 × 1000

-

-

*1 Displays a reduced image.

* All are compliant only with non-interlaced. * Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is input. * The frequency values for the Sun are reference values.

Show 13 more labels / short text on this page
58-7/16 [1485] · 17-5/16 [440] · 36-5/16 [923] · Opening height · 25-9/16 [650] · (31-3/4 [807]) · 13/16 [20] · 15-1/2 [393] · 6-1/8 [155] · 23-7/16 [595] · Analog(PC3/PC4) · Yes Yes Yes · Yes Yes Yes
Page 20 of the Sharp PN-S655 user manual — n PC/AV output terminal pins
Seite 20 · Zum Vergrößern klicken
Seite 20

Specifications

nDDC (plug and play) The monitor supports the VESA DDC (Display Data Channel) standard. DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect plug-and-play monitors. There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.

n PC1/AV1 input terminal pins

n PC2/AV2 input terminal pins

Sharp PN-S655 — n PC1/AV1 input terminal pins diagram (page 20)
Abb. 14 · n PC1/AV1 input terminal pins
Sharp PN-S655 — n PC1/AV1 input terminal pins diagram (page 20)
Abb. 15 · n PC1/AV1 input terminal pins

n PC3 input terminal pins

n RS-232C input terminal pins

Sharp PN-S655 — n PC3 input terminal pins diagram (page 20)
Abb. 16 · n PC3 input terminal pins
Sharp PN-S655 — n PC3 input terminal pins diagram (page 20)
Abb. 17 · n PC3 input terminal pins

6 GND for red video signal 14 Vsync signal input

7 GND for green video signal 15 DDC clock

n PC/AV output terminal pins

n RS-232C output terminal pins

Sharp PN-S655 — n PC/AV output terminal pins diagram (page 20)
Abb. 18 · n PC/AV output terminal pins
Sharp PN-S655 — n PC/AV output terminal pins diagram (page 20)
Abb. 19 · n PC/AV output terminal pins
Quellen

Referenzen & Links

In dieser Anleitung genannte Seiten – Hersteller, Support und Downloads.

Frage zu Sharp PN-S655 stellen

Besitzer und unser Team antworten in der Regel innerhalb eines Tages – und Ihre Frage hilft auch anderen weiter.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Noch keine Fragen zu Sharp PN-S655

Stellen Sie die erste Frage — andere Nutzer oder unser Team antworten Ihnen.

Originaldokument

Sharp PN-S655 PDF-Anleitung

112 Seiten·7.5 MB·Kfz-Videosystem·PDF
Klicken Sie oben auf eine Seite, um sie hier zu öffnen
Seite 1 / …
100%
Seiten werden geladen…