Benutzeranleitung / Produktwartung LC 65D64U des Produzenten Sharp
Zur Seite of 70
SHARP ELECTRONICS CORPORA TION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORA TION LC-65D64U OPERA TION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN Printed in Mexico Imprimé au Mexique I.
Dimensional drawings Unit: inch (mm) 56 29 / 64 (1433.5) 40 (1016) 37 11 / 64 (944) 2 27 / 32 (72) 30 23 / 32 (780) 60 11 / 64 (1528) 3 7 / 8 (98) 15 7 / 8 (403) 6 1 / 32 (153) 31 3 / 4 (806.5) 22 9 / 32 (566) 17 21 / 64 (440) 25 19 / 32 (650) 12 13 / 16 (325) LC-65D64U_E_Hyo.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert.
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expr essly approved by the manufactur er could void the user's authority to operate this equipment.
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This pr oduct has been engineered and manufactur ed with the highest priority on safety . However , impr oper use can result in electric shock and/or fir e.
IMPORTANT SAFETY INSTRUCTIONS 4 • Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. • Stand — Do not place the product on an unstable cart, stand, tripod or table.
5 • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
Supplied accessories Remote control unit (x1) Page 8 Page 8 Page 7 Page 7 Page 7 “AAA” size battery (x2) AC cord (x1) Cable clamp (x1) Operation manual (x1) Cloth (x1) Page 7 Cable tie (x1) 6 NOTE • Always use the AC cord supplied with the TV. • AC cord enclosed in this product is for 110-125V.
POWER indicator Power Ferrite core 7 Ventilation & Cleaning Tips Keep your AQUOS television in a well ventilated area and make sure not to place it by a heat source or use near water. The AQUOS television is designed for AC use only and should be used with supplied AC cord.
30º 30º 30º 30º 17´ (5 m) Remote control sensor 8 QUICK REFERENCE If the remote control fails to operate TV functions, replace the batteries in the remote control unit. CAUTION Improper use of batteries can result in chemical leakage or explosion.
9 IMPORTANT INFORMATION ................................. 1 Trademarks ............................................................. 2 DEAR SHARP CUSTOMER .................................... 3 IMPORTANT SAFETY INSTRUCTIONS ................. 3 Supplied accessories .
10 Part names TV (Front) OPC indicator** POWER indicator** OPC sensor* Remote control sensor NOTE *OPC: Optical Picture Control (See page 26.) **See page 16 for TV status indicator.
3 2 11 6 5 6 4 8 19 17 18 20 21 7 22 10 9 23 11 13 12 25 26 27 14 15 29 24 28 11 Part names 1 TV POWER: Switch the TV power on or enters standby. (See page 16.) 2 DISPLAY: Display the channel information. 3 SOURCE POWER: Turns the power of the external equipment on and off.
Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set.
NOTE • To enjoy the AQUOS 1080p display capability, connect your external equipment using a component cable and set the equipment to 1080p output. • See page 15 for connecting a Blu-ray disc player, HD-DVD player, DVD player or a Digital TV STB to the HDMI terminal.
Connecting a VCR, game console or camcorder A VCR, game console, camcorder and other audiovisual equipment can be conveniently connected using the INPUT 1, 2 and 3 terminals. VCR/Game console/ Camcorder Using Digital Audio Output It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal.
PC 31.5 kHz 31.5 kHz 37.9 kHz 37.5 kHz 35.1 kHz 37.9 kHz 48.1 kHz 46.9 kHz 48.4 kHz 56.5 kHz 60.0 kHz 47.7 kHz 640 x 480 720 x 400 VGA 800 x 600 SVGA XGA 1024 x 768 WXGA 1360 x 768 70 Hz 60 Hz 72 Hz 75 Hz 56 Hz 60 Hz 72 Hz 75 Hz 60 Hz 70 Hz 75 Hz 60 Hz O O O O O O O O O O O 64.
Power 16 Simple operations for watching a TV program TV POWER (On/Standby) Turning on the power Press POWER on the TV, or TV POWER on the remote control unit. • POWER indicator (Green): The TV is on. (After a few seconds, a window appears with sound.
Language Air/Cable CH Search English Español Français CH Search [ ] 20 Found [ ] 25 Air 2 Air ANALOG Audio : MONO Air/Cable Language CH Search Air Cable Air/Cable Language CH Search Start Cancel Whe.
22. Air Air DIGITAL 22.1 22.1 Air 22 Air 2 Air 11 Cable 1 Cable 115 Cable ANALOG 5 Air 5 Air ANALOG 18 Simple button operations for changing channels You can change channels in several ways. NOTE • When selecting a 1-digit channel number, it is not necessary to press 0 before the number.
20 20 20 Surround : Off Surround : On 19 Simple button operations for changing volume/sound ■ Changing the volume You can change the volume on the TV or on the remote control unit. NOTE • VOL k / l on the TV operates the same as VOL k / l on the remote control unit.
2 Air ANALOG Audio : MONO 2 Air ANALOG Audio : STEREO 2 Air ANALOG Audio : MAIN 2 Air ANALOG Audio : SAP 2 Air ANALOG Audio : MONO 2 Air ANALOG Audio : ST(SAP) 2 Air ANALOG Audio : SAP(ST) 2 Air ANALOG Audio : MONO 2.2 Air DIGIT AL Audio3 : SURROUND 2.
ENTER : Select : Enter MENU : Exit RETURN : Back On-Screen Display 1 Item displayed in yellow • This indicates the item currently selected. • Press ENTER to go to the adjustment screen for this item. 2 Item in brackets • This indicates the current setting for the item.
Picture Picture 22 Basic adjustment settings Menu items for TV/INPUT 1/2/3 Menu items for HDMI/PC-IN Audio Treble .......................................................................... Page 28 Bass .................................................
23 Basic adjustment settings Press MENU to display the MENU screen, and then press c / d to select “Setup”. Press a / b to select “EZ Setup”, and then press ENTER . • If you already set the Secret No., go to step 3. If not, skip to step 4. Input the 4-digit secret number by using 0 – 9 .
Signal Strength Channel Strength Signal Strength Current Max 00 Signal Strength Current CH Max 0 12 0 Signal Strength Channel Strength 24 Basic adjustment settings Antenna Setup - DIGITAL In order to receive digital air broadcasts, you need a digital broadcast antenna.
Air 3 Air 18 Air 10.1 AB C D Air 3 AB C D Air 10.1 Ye s No 25 Basic adjustment settings Favorite channel setting This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily.
Picture Audio Contrast OPC Brightness Color Tint Sharpness Advanced Reset [ b 30] [ 0] [ 0] [ 0] [ b 2] 0 a 30 a 30 a 30 a 10 b 40 b 30 b 30 b 30 b 10 Backlight [ b 12] a 16 b 16 Off On On : Display 26 Basic adjustment settings Picture adjustments Adjusts the picture to your preference with the following picture settings.
27 Advanced picture adjustments This TV provides various advanced functions for optimizing the picture quality. Press MENU to display the MENU screen, and then press c / d to select “Picture”. Press a / b to select “Advanced”, and then press ENTER .
Audio Power Control T reble Bass Balance Surround Bass Enhancer Reset [Off] [On] a 15 L b 15 [ 0] [ 0] [ 0] a 15 b 15 R 28 Sound adjustment You can adjust the sound quality to your preference with the following settings. Basic adjustment settings Press c / d to adjust the item to the desired level.
Disable Enable 4 29 Surround Surround function allows you to enjoy realistic “live” sound. NOTE • You can choose Surround by pressing SURROUND on the remote control unit. (See page 19.) • Audio menu is grayed out when Output Select is set to “Variable”.
Auto COMPONENT VIDEO Option Input Select Output Select Audio Only Digital Noise Reduction [Fixed] [Off] [Auto] AQUOS LINK Setup 30 Using external equipment Displaying an external equipment image To view external source images, select the input source from INPUT on the remote control unit or on the TV.
Input 4 (HDMI) Input 5 (HDMI) Input 6 (HDMI) Input 7 (RGB) Ye s No INPUT SOURCE TV INPUT1 INPUT2 INPUT3 INPUT4 INPUT5 INPUT6 INPUT7 Digital Noise Reduction Output Select Audio Only [Fixed] HDMI Setup .
Auto Sync. adjustment (for Analog PC input mode only) For automatically adjusting the PC image. Press a / b to select “Auto Sync.”, and then press ENTER . Press MENU to display the MENU screen, and then press c / d to select “Setup”. 1 2 Press c / d to select “Yes”, and then press ENTER .
Now initializing... 33 Useful adjustment settings Reset If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values. Press c / d to select “Yes”, and then press ENTER . • “Now, TV will restart automatically.
Sleep Timer: Remaining 30 Off 30 60 120 90 34 Input Label Lets you set the input terminal displayed when using the INPUT SOURCE menu or channel display. Useful adjustment settings Press a / b / c / d to select the new name for the input mode, and then press ENTER .
View Mode Side Bar S. Stretch Zoom Stretch 35 Useful adjustment settings Press VIEW MODE or a / b while the View Mode menu is displayed to select a desired item on the menu. • You can sequentially select a View Mode that has its own aspect ratio. View Mode for 4:3 Programs Stretch: This mode is useful for 1.
View Mode Normal Zoom Stretch Dot by Dot 36 View Mode for PC input mode You can select the screen size. NOTE • Connect the PC before making adjustments. (See page 15.) • Selectable screen size may vary with input signal type. 1 2 Press VIEW MODE .
37 Useful adjustment settings Output Select Allows you to select what controls the audio output. Color System Select the video signal system compatible with your equipment from the list below: — Auto/NTSC/PAL-M/PAL-N NOTE • “Color System” can only be set for the INPUT 1 VIDEO, INPUT 2 and INPUT 3 VIDEO.
AV MODE: MOVIE AV MODE: ST ANDARD AV MODE: DYNAMIC AV MODE: GAME AV MODE: USER [TV] AV MODE: DYNAMIC (Fixed) AV MODE: MOVIE AV MODE: ST ANDARD AV MODE: DYNAMIC AV MODE: GAME AV MODE: PC AV MODE: xvYCC.
2 Air ANALOG Audio : MONO CC : 1/2 CC1 1/3 ENG 2/3 CC1 3/3 T ext1 Off 39 Closed Captions and Digital Closed Captions Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV.
Caption Size Default Font Style Default Foreground Color Default Foreground Opacity Default Background Color Default Background Opacity Default Character Edge Default Reset ABC 123 Selected item Description Default The font specifi ed by broadcasting station or default font.
V -Chip Secret No. Status V -Chip (DTV Only) New Secret No. Secret No. Clear New Secret No. a a a a Input Secret No. a a a a Reconfirm a a a a V -Chip V -Chip (DTV Only) Secret No. Status On Off New Secret No. Secret No. Clear New Secret No. * * * * Input Secret No.
New Secret No. Secret No. Clear New Secret No. a a a a Input Secret No. a a a a Reconfirm a a a a New Secret No. Secret No. Clear New Secret No. a a a a Input Secret No. a a a a Reconfirm a a a a New Secret No. Secret No. Clear New Secret No. * * * * Input Secret No.
MP AA TV Guidelines Can. English Ratings Can. French Ratings PG-13 R NC-17 X NONE PG G 43 Parental control (setting V-CHIP level) V-CHIP is an electronic fi ltering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children.
MP AA TV Guidelines Can. English Ratings Can. French Ratings PG-13 R NC-17 X NONE PG G MP AA TV Guidelines Can. English Ratings Can. French Ratings L S V FV D TV -G TV -PG TV -14 TV -MA NONE TV -Y7 TV -Y MP AA TV Guidelines Can.
45 Canadian Rating Systems • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming.
46 Canadian English ratings Example Repeat steps 1 to 4 in Canadian English ratings . Press a / b to select “Can. French Ratings”, and then press ENTER . Press a / b to adjust the item to your desired position. “ ” indicates the item is blocked.
47 How to temporarily release the V-CHIP BLOCK When the V-CHIP BLOCK is working and censors a broadcast, “V-CHIP HAS BEEN ACTIVATED.” displays. Reactivating the temporarily released V-CHIP BLOCK You can reactivate the temporarily released V-CHIP BLOCK as shown below.
48 Useful adjustment settings Software Update This function allows software updates by inserting a USB memory device with the update fi le into the USB terminal on the TV. Regarding how to obtain the software update fi le, please call 1-800-BE-SHARP.
49 Press ENTER to start updating. • The screen becomes dark for a while until the update screen can be displayed. Please wait for the update screen to appear. Do not unplug the AC cord. The picture will temporarily go dark until the Software Update display appears.
50 NOTE • When this function is not available, “No displaying still image available.” will display. • The still image automatically goes out after 30 minutes. • If you are using the freeze function and a broadcast activates the V-CHIP BLOCK, the freeze function will be cancelled and a V-CHIP BLOCK message will appear.
51 Manufacturer codes REMOTE CONTROL CODE NUMBER Other viewing options VCR BRAND REMOTE CONTROL CODE NUMBER DVD/LD BRAND REMOTE CONTROL CODE NUMBER CATV/SAT BRAND NOTE • Numbers marked with * are SAT codes, all others are CATV codes. AUDIO BRAND REMOTE CONTROL CODE NUMBER LC-65D64U_E.
1 2 3 4 1 2 3 52 ■ Cable control buttons When the FUNCTION is set to CBL/SAT, the cable converter connected to the TV can be operated using 1 to 4 . 1 SOURCE POWER Turns the cable converter power on and off. 2 0–9 Press a button (or buttons) that corresponds to the channel that you wish to watch.
2 8 4 1 7 65 3 8 2 1 10 3 5 6 9 4 7 53 Other viewing options ■ VCR control buttons The remote control unit button will function as follows when the FUNCTION of the remote control unit is set to VCR. • Press INPUT until the input connected to the VCR is selected.
You can operate AQUOS LINK-compatible devices with the remote control unit when the FUNCTION of the remote control unit is set to TV. REC STOP and OPTION buttons will function only when AQUOS LINK is used. ■ One Touch Play While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source.
Other viewing options Press a / b to select “AQUOS LINK Setup”, and then press ENTER . Press a / b to select “Auto Power On”, and then press ENTER . Press MENU to display the MENU screen, and then press c / d to select “Option”. 1 3 2 Press c / d to select “Yes”, and then press ENTER .
Selecting Media Type for CEC-compatible Recorder You can switch the media (HDD or DVD) for playback or recording on the AQUOS LINK-compatible recorder. Press a / b to select “Media change”, and then press ENTER . Select the desired media such as DVD or HDD.
One Touch Playback AQUOS LINK allows you to operate the HDMI- connected equipment with one remote control. Press d to start playing back a title. • The last played program is played back. You can use following buttons during broadcast viewing. Buttons Description SOURCE POWER Turns the power of the HDMI connected devices on and off.
Vertical mounting Angular mounting 0°/ 5°/ 10° 58 Removing the stand Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal. CAUTION • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
59 Troubleshooting Possible Solution • Is the volume too low? (See page 19.) • Is “Variable” selected in “Output Select”? (See page 37.) • Have you pressed MUTE on the remote control unit? (See page 19.) Cautions regarding use in high and low temperature environments Appendix Problem • No power • Unit cannot be operated.
60 Appendix RS-232C port specifi cations PC control of the TV • When a program is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/AV) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing.
61 Appendix Command table • Commands not indicated here are not guaranteed to operate. Response code format Normal response Return code (0DH) Return code (0DH) Problem response (communication error or incorrect command) OK ER R NOTE • If an underbar (_) appears in the parameter column, enter a space.
Item Model: LC-65D64U LCD panel 65 o Advanced Super View & BLACK TFT LCD (Screen size 64 33 / 64 o measured diagonally) Number of dots 6,220,800 dots (1920 g 1080 g 3 dots) TV Function TV-standard.
63 The secret number is NOTE • As a precautionary measure, make a note of your secret number above, cut it from this manual, and keep it in a safe place. . CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure.
64 Information on the software license for this product Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.
65 For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
66 LC-65D64U_E.indb 66 LC-65D64U_E.indb 66 2007/07/11 14:41:37 2007/07/11 14:41:37.
Dimensional drawings Unit: inch (mm) 56 29 / 64 (1433.5) 40 (1016) 37 11 / 64 (944) 2 27 / 32 (72) 30 23 / 32 (780) 60 11 / 64 (1528) 3 7 / 8 (98) 15 7 / 8 (403) 6 1 / 32 (153) 31 3 / 4 (806.5) 22 9 / 32 (566) 17 21 / 64 (440) 25 19 / 32 (650) 12 13 / 16 (325) LC-65D64U_E_Hyo.
SHARP ELECTRONICS CORPORA TION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORA TION LC-65D64U OPERA TION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN Printed in Mexico Imprimé au Mexique I.
Ein wichtiger Punkt beim Kauf des Geräts Sharp LC 65D64U (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sharp LC 65D64U noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sharp LC 65D64U - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sharp LC 65D64U reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sharp LC 65D64U erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sharp LC 65D64U besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sharp LC 65D64U verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sharp LC 65D64U. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sharp LC 65D64U gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
