Benutzeranleitung / Produktwartung EC-S5170 des Produzenten Sharp
Zur Seite of 24
1 OPERA TION MANUAL V ACUUM CLEANER EC-S5170 EC-T5180 EC-T5180A EC-T5180B MODELS • IMPORTANT SAFETY INSTRUCTIONS .... 2 • PARTS IDENTIFICATION ........................... 4 • SPECIFICATIONS ........................................ 4 • OPERATING INSTRUCTIONS .
2 W ARNING / IMPORT ANT SAFETY INSTRUCTIONS When using an electrical vacuum cleaner, basic precautions should always be followed including the following: Read all instructions carefully before using this vacuum cleaner. To reduce the risk of fire, electric shock, or injury: 10 11 12 1 2 3 4 5 6 7 8 9 Do not use outdoors or on wet surfaces.
3 SA VE THESE INSTRUCTIONS This vacuum cleaner is intended for household use only. To reduce the risk of electric shock, this vacuum cleaner has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way.
4 REAR P ARTS IDENTIFICA TION SPECIFICA TIONS FRONT FEATURES MODEL INPUT (Amp) POWER CONTROL CORD LENGTH HEAD LIGHT 12.0 24 Ft YES NO 12.0 35 Ft YES YES EC-S5170 EC-T5180 EC-T5180A EC-T5180B Extension.
5 Operate vacuum cleaner only at the voltage specified on the nameplate. W ARNING: REAR Dirt Compartment Dirt Compartment Handle (Lower) Dirt Compartment Handle (Upper) Bumper Exhaust Filter (Inside) Max Fill Line Power Cord Upholstery Tool with Detachable Brush Name Plate ON/OFF Switch Cord Storage Hook Carrying Handle S5170/t5180(Layout) 2001.
6 OPERA TING INSTRUCTIONS First remove the handle screw. Then slide the base of the handle to the body of the vacuum cleaner as shown. (Fig. 1) 1 HOW TO A TT ACH THE HANDLE TO V ACUUM CLEANER Fig.1 Fig.2 Line up the hole on the handle with the hole on the side of the vacuum cleaner and insert the screw.
7 HOW TO RELEASE THE HANDLE Upright Position Fig.6 Fig.7 Fig.8 Place foot on the left side of the nozzle head and pull the handle to release.(Fig.6) Push the handle forward so it is locked in upright position. In this position, agitator brush stop autmatically by "Agitator Safety Mechanism".
8 Fig.9 ON/OFF SWITCH At the back lower left of vacuum cleaner. The ON/OFF switch is located. (Fig.9) OPERA TING INSTRUCTIONS POWER CONTROL SWITCH A slide switch allows selection of cleaning power from low "L" to high "H". To increase the suction power; slide the switch toward the "H" position.
9 CREVICE TOOL For door tracks, narrow spots, etc.(Fig.12) Fig.11 Fig.12 HEA T PROTECTION SYSTEM This vacuum cleaner has a special thermostat that protects the motor from overheating. If the vacuum cleaner suddenly shuts off, turn off the vacuum and unplug the cleaner.
10 1 2 OPEN CLOSE MAINTENANCE INSTRUCTIONS 1 2 Unplug this vacuum cleaner from the electrical outlet before servicing. Fig.17 DIRT COMPARTMENT The dirt compartment assembly consists of the following parts: HOW TO REMOVE AND REPLACE DIRT COMP ARTMENT Press down dirt compartment release button to remove dirt compartment from vacuum cleaner.
11 1 2 STEP STEP 3 4 CAUTION: Do not use chemicals, bleach or hot water to clean the dirt compartment. Wash with soap and water using a soft brush. Do not dry with hair dryer or heater. NOTE: Very fine materials, such as face powder, plaster or fine powder may seal the filters and cause loss of suction.
12 CAUTION: Do not use a washing machine for cleaning. Do not dry with hair dryer or heater. Be sure the filter is set in the right position. NOTE: For maximum performance we recommend to clean this filter every time you empty the dirt compartment. MAINTENANCE INSTRUCTIONS Fig.
13 Net Filter Fig.28 1 2 HOW TO REMOVE / AND RESET THE BOTT OM PLA TE Insert the front three tabs of the bottom plate into the grooves at the front end of the nozzle head, then reset the bottom plate. (Fig. 29) Fasten four screws. Before replacing any parts, unplug the vacuum cleaner from the electrical outlet and release the handle.
14 1 Fig.30 Remove the bottom plate, following the instructions on page 13. 2 3 4 HOW T O REMOVE THE HEAD COVER If you find excess dirt or obstructions under the head cover, you can remove the head cover. The head cover is secured by two screws from the bottom side.
15 REPLACEMENT INSTRUCTIONS HOW TO REPLACE THE HEADLIGHT LAMP Unplug the vacuum cleaner from the electrical outlet. 1 Remove the dirt compartment. 2 3 4 5 Unscrew the center screw. (Fig.33) Fig.33 Lift the lamp cover. (Fig.34) Replace the Lamp cover and secure with the screw.
16 The exhaust filter consists of an electrostatic HEPA Type filter. (EC-S5170) HEPA Filter (EC-T5180 series) The HEPA Type filter should be replaced at least every 10 months to maintain efficient filtration. (EC-S5170) HEPA Filter(EC-T5180 series) can be washed with running water.
17 When replacing the belt, always set the RUG/FLOOR Selector pedal in the "FLOOR" position. 1 2 3 4 5 Fig.41 HOW TO REPLACE THE BEL T AGIT A TOR ASSEMBL Y After removing the bottom plate (see page 13) to determine if the belt or the agitator is worn or broken.
18 MODEL NUMBER SERIAL NUMBER DATE OF PURCHASE Dealer Telephone Service Station Telephone Please provide the following information when you write or call: model number, serial number, date of purchase, your complete mailing adress (including zip code), your daytime telephone number (including area code) and description of the problem.
19 DESCRIPTION OF ACCESSORIES For replacement accessories, contact your local dealer or call the Sharp Accessories and Supply Center at 1-800-642-2122, or visit Sharp ’ s web site at www.sharp-usa.com. For other parts, please contact your nearest Sharp Dealer.
20 SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORATION Osaka, Japan SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand .
21 ASPIRADORA INSTRUCCIONES DE OPERACION INSTRUCCIONES DE SEGURIDAD IMPORT ANTES Cuando utilice un aparato el é ctrico, deben seguirse siempre las precauciones b á sicas, incluyendo lo siguiente: Lea todas las instrucciones cuidadosamente antes de usar esta aspiradora.
22 Cuando nos llame o escriba suministrenos la siguiente informaci ó n: modelo, n ú mero de serie, fecha de compra, su direcci ó n (incluyendo el c ó digo postal), un tel é fono donde podamos llamarle durante el d í a (incluyendo el c ó digo del area) y la descripci ó n del problema.
23 Para reemplazo de accesorios, por favor contacte a su distribuidor Sharp mas cercano. Liame al 1-800-642-2122, o visite nuestra pagina de internet (http://www.
24 SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORATION Osaka, Japan GARANTIA LIMIT ADA SHARP ELECTRONICS CORPORATION garantiza al primer comprador del producto q.
Ein wichtiger Punkt beim Kauf des Geräts Sharp EC-S5170 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sharp EC-S5170 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sharp EC-S5170 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sharp EC-S5170 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sharp EC-S5170 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sharp EC-S5170 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sharp EC-S5170 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sharp EC-S5170. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sharp EC-S5170 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
