Benutzeranleitung / Produktwartung CV-2 des Produzenten Sharp
Zur Seite of 32
CV -2 8 x 30 1.3MP Digital Camera Binocular ®.
.
Contents Quick Start ................................................................................ 4 F eatures .................................................................................... 7 Introduction .....................................
Quick Start T urn on camera. Press and hold down Mode for 3 seconds . Press the Shutter . Y ou’ve tak en a picture! P oint at something interesting. 2 Install 2 AAA batteries (not included) .
Quick Start Select the Flashback Mode. Press the Mode button until the Flashbac k icon displays . Press the Shutter button again to stop recor ding. CaptureVie w has recorded only the last 10 seconds of the activity . See F LASHB A CK , and S UGGESTED U SES FOR F LASHBA CK , pages 16 and 17 for more inf ormation.
6 Quick Start Sit back and relax a minute. If using Windows 98ME or higher , CaptureView automatically installs on your PC . No drivers are needed. If using Windows 98SE or lower , drivers must be installed on y our PC and can be f ound on the included CD-Rom.
Fig. 1: T op View 1. Mode Button 2. Shutter Button 3. Diopter Scale (right eyepiece) 4. LCD Panel 5. Barrels c e f d b Features 7 Fig. 1.
8 1) g g j h i j Features 1# 1$ 1! 1! 1@ Fig. 2 Fig. 3 Fig. 2: Rear View 6. Eyepieces 7. USB Port 8. SD Card Port 9. Rubber eyecups 10. Focus knob Fig. 3: Front View 11. Objective Lens 12. Batter y Compar tment Lid (push forw ard and lift to remo v e) 13.
Congratulations on purchasing the Meade ® CaptureVie w ® CV -2. CV -2 is an 8 x 30mm full-featured binocular . It is integrated with a digital camera that requires no film to capture pictures or video . This manual is designed to quic kly guide you through the operation of your CaptureVie w CV -2.
10 How to Use Y our Binocular Adjust Eye Relief Adjust the Barrels Y ou need to adjust the barrels, as the distance between your e yes is usually different than the distance betw een another person’ s eyes . If you wear e yeglasses, f old down the rubber ey ecups and hold the ey epieces up against your glasses.
Focus the Binocular 1. Set the Diopter Scale on underside of CaptureView at its center point between “+” and “-. ” 2. Choose an object (such as a telephone pole) that is at least 50 feet (15m.) a way . 3. Looking with only your left e ye , rotate the Focus Knob until the object y ou are vie wing is focused.
12 Inser t Batteries Select an Operation 1. Make sure camera is off bef ore changing batteries . 2. Push the battery compar tment lid forw ard and lift to open. 3. Inser t 2 AAA 1.5v (user-supplied) batteries into the compar tment, noting the correct polarity as illustrated inside the compartment.
Select Near or Far Focus 1. Press and hold the Mode button f or 3 seconds to turn on the camera. 2. The binocular can be focused using the focus knob . Howe ver , the camera can be set to Near or F ar focus using the focus ring, and is not aff ected by the focus knob .
T aking Pictures and Video 14 T ake a Still Picture 1. Press and hold the Mode button f or 3 seconds to turn on the camera. The camera will beep and the camer a icon displa ys on the LCD . The counter , batter y life and resolution icons also display .
Capture Video 1. Press and hold the Mode button f or 3 to 5 seconds to turn on the cam- era. 2. Press the Mode button once and the Video mode icon displays . 5. Point the binoculars at the scene y ou wish to capture. 4. Press the Shutter button. The camer a now captures video .
16 Flashback If you w ant to ... Do this... For e xample, you ma y want to record a baseball pitcher throwing a pitch: 1. Select the Flashback icon. 2. Press the Shutter button to begin recording while the pitcher pre- pares. After the pitcher throws the ball, click on the Shutter b utton again to turn off recording.
Some suggestions f or using Flashback Let’ s say y our daughter is on the varsity bask etball team. And right now , she’s dribbling down the court. Y ou’ d like to capture her patented hook shot on video. This is a job for Flashbac k. Select the Flashback icon and press the Shutter b utton as she sets off down cour t.
18 Use the Mode and Shutter Buttons Note: If you do not perf or m an oper ation f or 60 seconds , the camera automatically switches off . • Press and hold the Mode button f or 3 to 5 seconds to turn the camera on or off. • Use the Mode button to cycle through the operation icons.
Use the Camera Mode Change the Camera Resolution H: High Resolu tio n mode ( 1280 x 1024 ). L: Lo w Resolution mode ( 640 x 480 ). The default setting is High Resolution. If you w ant to ... Do this... Camera Icon High and Low Resolution Icons • K eep pressing the Mode button until the Camera icon displa ys.
20 Use the Video Mode Note: The length of a movie depends on ho w much memory you hav e availab le. A udio recording is not av ailable with this camera. Use Flashbac k Note: Flashback captures 10 seconds of video . • K eep pressing the Mode button until the Video icon displays.
Find Out How Man y Pictures Y ou Ha ve T aken Counter Display If you w ant to ... Do this... • Erase Last. K eep pressing the Mode button until the Erase Last Image icon displays and then press the Shutter button. The icon flashes. Press the Shutter b utton again to er ase the last captured image or movie.
22 Operations Use the Self-timer • K eep pressing the Mode button until the Self-timer icon displays and press the Shutter button. The camera then pauses f or about 10 seconds: It sends out 6 slow and then 6 fast w ar ning beeps before taking the picture.
Find Out Why CaptureView is Beeping Note: When the battery is low , CaptureView sends out six short high beeps. It is recommended you do wnload the pictures or change the batteries at this time. Y ou have 60 seconds to change the batteries before y our images are deleted.
24 Operations Download Pictures If you w ant to ... Do this... USB P or t If using Windows 98SE or lower , drivers must be installed on y our PC and can be found on the included CD-Rom. If using Windows 98ME or higher , CaptureView automatically installs on y our PC .
1. Using the provided USB cab le, plug the one end of the cable into the camera's USB port and the other end into your PC's USB port. 2. If using Windo ws 98SE or lower , drivers must be installed on y our PC. See the included CD-Rom. If using Windows 98ME or higher , CaptureView automatically installs on your PC .
26 1. Inser t supplied CD Rom into your PC’ s dr ive . 2. A splash screen displays. Click on “Ulead Photo Express. ” 3. Follow on-screen instructions. 4. After you click “Finish, ” the Ulead Photo Express icon appears on y our desktop . 5. Double-clic k the icon to launch the program.
Other Software The included CD ROM contains other softw are programs b y Ulead that will assist you in editing your images , allow y ou to transf er images to email, and provide you with other useful functions.
28 Care of your CaptureVie w 1. Nev er immerse CaptureView in liquid. Remove dust or stains with a soft cloth dampened with water or neutral detergent. K eep in a dr y , cool dust-free environment or a container when it is not being used. Do not spra y liquid cleaners directly onto LCD .
Binocular power 8X Binocular objective lens diameter 30mm Binocular optical design Folding roof prism, fully-coated Binocular close focus 16 ft. Field of view (diagonal) 7.9° Binocular field of view 366 ft. at 1000 yds. Image capture resolution 1280 x 1024, 640 x 480, 24-bit color Maximum length of movie Up to 30 seconds Camera aperture f/4.
SIMMONS BINOCULAR/DIGIT AL CAMERA LIMITED WARRANTY Every Simmons binocular/digital camera is warranted b y Simmons Outdoor Cor poration (“Simmons”) to be free of defects in materials and workmanship for a period of ONE YEAR from the date of original purchase in the U.
.
82-242-01020 v1.0 08/04A Simmons Outdoor Corporation 6001 OAK CANYON, IRVINE, CALIFORNIA 92618 J (949) 451-1450 J www.simmonsoptics.com.
Ein wichtiger Punkt beim Kauf des Geräts Sharp CV-2 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sharp CV-2 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sharp CV-2 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sharp CV-2 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sharp CV-2 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sharp CV-2 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sharp CV-2 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sharp CV-2. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sharp CV-2 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
