Benutzeranleitung / Produktwartung RVQ 100B-1 des Produzenten Sensormatic
Zur Seite of 23
Monochrome Quad Processor Installation and Operation Manual Model RVQ 1008-l PartNumber92-10083 REVB 43s ensqrmatic THEwoBJDLEu)mlNu~.
Monochrome Quad Processor Notice The information in this manual was current when published. The manu- facturer reserves the right to revise and improve its products.
Installation and Operation Manual WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. I WARNING! RISK OF ELEClRlCAL SHOCK A I DO NOT OPEN! . WARNING: TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE.
Monochrome Quad Processor CONGRATULATIONS You now own one of the many fine products manufactured by Sensormatic Electronics Corporation. This product has been carefully inspected to rigid quality standards before shipment. With reasonable care, it will provide years of reliable performance.
Installation and Opemtion Manual TABLE OF CONTENTS FEATURES ....................................................... 1 TECHNICAL INTRODUCTION .......................... 2 FRONT PANEL DESCRIPTION ........................... 3 REAR PANEL DESCRIPTION ....
Monochrome Quad Processor IMPORTANT INFORMATION 1. 2. 3. 4. 5. 6. 7. a. 9. READ INSTRUCTIONS - Read all safety and operating instructions before operating the video product. RETAIN INSTRUCTIONS - Retain the safety and operating instructions for future reference.
Installation and Operation Manual 11. OVERLOADING - Do not overload wall units and extension cords, as this can result in a risk of fire or electrical shock.
Installation and Operation Manual 1 FEATURES . . . . . . . . . . . . . . . . Four different camera locations on one monitor screen at one time. Real-time refresh rate. High-resolution display. 640 x 512 pixels. VCR “ZOOM” playback. 320 x 256 pixels.
2 Monochrome Quad Processor TECHNICAL INTRODUCTION I + Am CONVERTER MEMORY l-l+ CON&R + This unit uses digital gechnoiogy to process and store the video information received from a camera. The incoming video image is transformed into a digital signal by an analog-to-digital (A/D) converter.
Installation and Operation Manual 3 FRONT PANEL DESCRIPTION 1. Power -Green power light indicates power is turned on and the unit is in the active (power on) mode.
4 Monochrome Quad Processor 4. seq - Displays cameras 1 - 4 and quad view sequentially at individually programmed dwell rates. 5. Home - Displays selected camera or quad view. 1 - Displays camera 1 full screen. 2 - Displays camera 2 full screen. 3 - Displays camera 3 full screen.
installation and Operation Manual 5 8. alarm - DBI5 connector for alarm inputs. A contact closure will command the unit to initiate the alarm mode. l first alarm - If the unit is in quad mode, the first alarm will signal the unit to display full screen, light the corresponding indicator and display the on-screen alarm message.
6 Monochrome Quad Processor lNSTAUATlON INSTRUCTIONS I. Connect cameras to unit by connecting video output of camera to camera input of unit. NOTE: Check the drawing above the monitor connector to see which quadrant on the monitorwill display the camera output.
Installation and Operation Manual 7 7. Connect alarm outputs. . normally open - When the unit goes into alarm, this contact will automaticallv close and will signal the VCR or external device to go’into alarm mode. Connect to alarm in of VCR or external device.
8 Monochrome Quad Processor INSTALLATION TIPS NOTE: While this unit will work with any properly installed camem system, the following information defines the requirements for optimum performance. Camera Specifications l This unit can accept signals from random interlaced cameras.
Installation and Operation Manual 9 OPERATING INSTRUCTIONS Power Program See Special Functions for details on programming the unit. VCR To play back a quad tape, press the play button on the VCR. Press the VCR button to view the tape as recorded in quad format or press 1,2,3, or 4 to selectively enlarge a quad to full screen.
10 Monochrome Quad Processor Additional alarms -In the presence of the first alarm, additional alarms will signal the unit to cycle through cameras with alarms at the programmed dwell time. With each alarm, the following will occur: l The unit displays the cameras with alarms.
Installation and Operation Manual 11 SPECIAL FUNCTIONS NOTE: This unit is equipped with special functions to provide maximum utility. Instructions to operate each special function follow. Quad Demo Operation This is used for demonstrating quad operation with only one with One Camera camera connected.
12 Monochrome Quad Processor 4. To set a dwell time for displaying camera 1, press and hold the 4 (right) button until the cursor moves to the DWL = 01 display. Use the 1 (up) and 2 (down) buttons to select a dwell time in seconds from 00 (bypass the camera) to 99 seconds.
Installation and Operation Manual 13 Programming Tips The program mode can be entered at any time to revise programmed information. Once in the program mode, use the ALL (menu) button to select the item to be revised. Once revised, use the ALL button to go to the next item.
14 Monochrome Quad Processor APPENDIX A TROUBLESHOOTING Sometimes problems can be easily solved by carefully checking seemingly obvious, but often overlooked, possibilities. Check this chart carefully if the unit is not responding properly. PROHEIR Vo power (power indicator does lot light).
Installation and Operation Manual 15 APPENDIX B SPECIFICATIONS Video Signal Format Camera Input Camera Output VCR Input VCR Output Digital Memory Refresh Rate CCIR monochrome only. 1.0 V p-p 75 ohm or HI-Z, BNC 1.0 V p-p 75 ohm termination 1.0 V p-p 75 ohm termination 1.
16 Monochrome Quad Processor Front Panel Controls Soft touch, rubberized push buttons with indicator lights PACKING LIST % Home ALL 1 2 3 4 VCR ALL 1 2 3 4 Camera In/Out Monitor Out BNC. one only VCR In BNC, one only VCR Out BNC, one only Alarm DBI 5, female receptacle Power 2.
Ein wichtiger Punkt beim Kauf des Geräts Sensormatic RVQ 100B-1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sensormatic RVQ 100B-1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sensormatic RVQ 100B-1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sensormatic RVQ 100B-1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sensormatic RVQ 100B-1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sensormatic RVQ 100B-1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sensormatic RVQ 100B-1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sensormatic RVQ 100B-1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sensormatic RVQ 100B-1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
