Benutzeranleitung / Produktwartung Set 840 S des Produzenten Sennheiser
Zur Seite of 41
Wireless TV Listening System Instruction manual Set 840 S Sennheiser electr onic GmbH & Co. KG Printed in Chin a Am Labor 1, 30900 Wedema rk, Germany Publ.
I II 5 6 5 7 R 1 3 4 2 D C 9 8 0 A I G H F E B.
I II 5 6 5 7 R 1 3 4 2 D C 9 8 0 A I G H F E B.
1 Contents Contents Safety instructions ................. ................................ ............. ...... 2 Delivery includes .................. ............................................... ...... 4 Product overview ................. ........
2 Safety instructi ons Safety instructions • Please read this instruction manual careful ly and completely before using the products. • Make this instruct ion manual easily acces sible to all u sers at all times. Always include t his instruction manual when passing the products on to third parties.
3 Safety instructions Intended use Intended use includes • having read this inst ruction manu al, especially the chapter “Safety instruction s” on page 2 , • using the products within the oper ating conditions and limitations described in this instruction manual.
4 Delivery includes Delivery includes The Set 840 S system is available as an EU and a US version. The following table shows which items are included with the respective version.
5 Product overview Product overview The overview pictures of the receiver and the transmitter can be found on the inside fr ont cover of this instruction manual.
6 Putting the Set 840 S system into operation Putting the Set 840 S system into operation Setting up the transmitter 왘 Choose a suitable place near your sound source (e.g. TV). 왘 Do not place the transmitter close to metal objects such as shelf bars, reinforced concre te walls, etc.
7 Putting the Set 840 S system into operation Connecting the transmitter to a sound source 왘 Switch your sound source (e.g. TV) off before connecting the transmitter. 왘 Plug one end of the connection cable J into the blue socket E of the transmitter.
8 Putting the Set 840 S system into operation Connecting the transmitter to a headphone socket 왘 Adjust the volume of the headphone socket on your sound source to a medium level. This improves the quality of wireless s ound transmis- sion. For detailed informat ion, please refer to the instruction manual of your sound source (e.
9 Putting the Set 840 S system into operation Connecting the transmi tter to a SCART socket Using the MKE 800 TV-N external microphone What if your sound source doesn’t have any of the connec- tions mentioned above? Y ou can then use the optional MKE 800 TV-N microphone.
10 Putting the Set 840 S system into operation T o connect the MKE 800 TV-N microphone: 왘 If possible, adhere the suppl ied V elcro tape directly in front of the loudspea ker of your TV . 왘 Press the microphone onto the V elcro tape. 왘 Connect the jack plug of th e microphone to the blue socket E of the transmitter.
11 Putting the Set 840 S system into operation Connecting the transmitter to the mains The EU and UK country adapte rs are included with the EU version of the Set 840 S; the US country adapter is included with the US version of the Set 840 S. 왘 Slide the supplied country adapter O onto the mains unit N .
12 Putting the Set 840 S system into operation Connecting the induction loop or headphones for hearing aids to the receiver The socket 5 of the receiver allows you to connect • the supplied induction loop R , • headphones or • a connection cable to your hearing aid or to induction couplers.
13 Putting the Set 840 S system into operation Connecting headphones 왘 Connect the 3.5 mm jack plug of the headphones to the socket 5 of the receiver. W earing the receiver In order to wear the receiv er, you can use the supplied lanyard Q , the clip P or the supplied induction loop R .
14 Putting the Set 840 S system into operation Attaching the receiver to clothing or belt If you want to attach the receiver to your clothing or belt, use the attachment clip P . T o remove the receiver: T o attach the receiver: 왘 Attach the clip P to your clothing or belt.
15 Using the Set 840 S system Using the Set 840 S system T o switch the Set 840 S system on, proceed as follows: Switching the transmitter on/off T o switch the transmitter on : 왘 Switch your sound source on. The transmitter automatically switches on.
16 Using the Set 840 S system Switching the receiver on/off T o switch the receiver off : 왘 Keep the on/off button 3 pressed until the channel indicator 1 goes off. Adjusting the volume CAUTION! Hearing damage due to high volumes! This receiver allows y ou to set higher volumes than conventional device s.
17 Using the Set 840 S system Searching for a sound source 왘 Switch the receiver on. The receiver automatically searches for one of the 3 channels of the transmitte r and starts the channel search on the last selected ch annel. If a ch annel is found, the channel se arch stops.
18 Using the Set 840 S system 왘 Press the channel search button 6 on the receiver to re-start the channel search. If reception is still su bject to interference: 왘 Read the chapter “If a prob lem occurs .
19 Using the Set 840 S system Meaning of the terms “mono” and “stereo” Individually enhancing the speech intelligibility 왘 Press the “speech intelligibility” button C repeatedly until the sound is optimally adjusted to your needs.
20 Using the Set 840 S system Storing and charging th e receiver The Sennheiser logo can face the operation indicator B or away from it. When the receiver is placed correctly into the charging compart.
21 Using the Set 840 S system Charging a rechargeable battery in the transmitter’s charging compartment You can charge the receiver’s rechargeable battery or a spare BA 300 rechargeable battery (not included in the delivery of the Set 840 S) in the charging compartment 9 at the side of the transmitter.
22 What if ... What if ... ... this indicator lights up? Indicator Status Meaning Channel indicator 1 on the receiver lit yellow The receiver has just been switched on or a button has just been pressed . flashes The distance between receiver and transmitter is too great.
23 What if ... ... you press this button? ... you change the position of this control/switch? Button Function Page Channel search button 6 on the receiver Searches for the sound source or a di fferent.
24 What if ... ... you hear acoustic signals or warning signals? Acoustic signal Meaning 3 ascending beeps The receiver has just been switched on. 3 descending beeps The receiver has just been switched off. 1 acknowledgement beep The channel search button has been pressed once briefly .
25 Cleaning the Set 840 S system T o switch the acoustic signals on and off: Cleaning the Set 840 S system Cleaning the transmitter and the receiver 왘 Before cleaning, disconnect the transmitter from the mains. 왘 Use only a slightly damp cl oth to clean the devices.
26 If a problem occurs ... If a problem occurs ... The transmitter does not switch on You cannot hear anything Possible cause Solution Is the mains unit connected correctly? Check the connection of the mains unit to the transm itter and to the mains (see page 11).
27 If a problem occurs ... You hear the sound only with one ear The sound of your sound so urce is hardly intelligible The loudspeakers of your TV are muted If a problem occurs that is not listed in the above tables or if the problem cannot be solved with the propos ed solutions, please contact your Senn heiser partner for assista nce.
28 Additional technica l information Additional technical information Fine adjusting the speech intelligibility The speech intelligibi lity can be en hanced individually on the trans- mitter (s ee page 19) .
29 Additional technical informati on Function of the treble boos t control By means of the transmitter’s step l essly adjustable treble b oost contr ol G , the audio signal is boosted as show n in the di agram. The treble boost control G allows you to select one of the curves shown in the diagr am below.
30 Accessories an d spare parts Accessories and spare parts For the Set 840 S, the follow ing receivers and stethoset receivers are available from your speciali st dealer: CAUTION! Danger of damage to the device! Components from othe r manufacturers (e.
31 Accessories and spare parts The following Set 840 S access ories are available from your specialist dealer: Cat. No. Accessory/spare part 500898 BA 300 spare rechargeable battery 502566 EZT 3011 in.
32 Specifications Specifications System Modulation FM, stereo Carrier frequencies EU version US version 863.3/864.0/864.7 MHz 925.95/926.8 /927.5 MHz Frequency respon se 50 Hz–16,000 Hz THD < 1% Charging time for rechargeable batte ry approx. 3 hours Signal-to-noise ratio (1 mV, peak deviation) typ.
33 Specifications Receiver Audio connection 3.5 mm stereo jack socket Power supply via BA 300 rechargeable Li-Pol battery (3.7 V / 150 mAh) Operating time up to 9 hours Weight approx. 50 g (with BA 300) Dimensions approx. 70 x 60 x 26 mm NT 13 mains unit Nominal input voltage 100 V~ to 240 V~ Mains frequency 50–60 Hz Nominal output voltage 13.
34 Specifications In compliance with The devices can be operated li cense-free in most countries of the European Union. Approved by T r ansmitters that operate in the 863 – 865 MHz frequency range c.
35 Manufacturer Declaration s Manufacturer Declarations W arranty Sennheiser electronic GmbH & Co. K G gives a warranty of 24 months on this product. For the current warranty co nditions, please visit our website at www.sennheise r.com or contact your Sennheiser partner.
36 Manufacturer Declaration s Statements regarding F CC and Industry Canada This equipment complies with P art 15 of the FCC Rules and with RSS-210 of Industry Ca nada.
37 Index Index Receiver Adjusting the balance 18 Adjusting the volume 16 Attaching the rece iver to clothing 14 Automatic channel search 17 Channel indicator (meaning) 22 Cleaning 25 No sound signal 2.
Wireless TV Listening System Instruction manual Istruzioni per l’uso Gebruiksaanwijzing Bedienungsanleitung | Notice d’emploi | Instrucciones de uso | Set 840 S Sennheiser electr onic GmbH & Co. KG Printed in Chin a Am Labor 1, 30900 Wedema rk, Germany Publ.
Ein wichtiger Punkt beim Kauf des Geräts Sennheiser Set 840 S (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sennheiser Set 840 S noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sennheiser Set 840 S - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sennheiser Set 840 S reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sennheiser Set 840 S erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sennheiser Set 840 S besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sennheiser Set 840 S verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sennheiser Set 840 S. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sennheiser Set 840 S gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
