Benutzeranleitung / Produktwartung M2OEBT des Produzenten Sennheiser
Zur Seite of 36
MOMENTUM Wireless M2 OEBT Instruction Manual.
2 | M2 OEBT.
M2 OEBT | 1 Contents Contents Important safety instructions ...................................................................................2 The MOMENTUM Wireless (M2 OEBT) .......................................................................4 Pack age includes .
2 | M2 OEBT Important safety instructions Important safety instructions X Read this instruction manual carefully and completely before using the product. X Always include this instruction manual when passing the product on to third parties. X Do not use an obviously defective product.
M2 OEBT | 3 Important safety instructions Intended use/Liability These wireless headphones are designed for use with mobile devices (e. g. mobile music players, smartphones, tablets, laptop computers) that support wireless communication via Bluetooth .
4 | M2 OEBT The MOMENTUM Wireless (M2 OEBT) The MOMENTUM Wireless (M2 OEBT) Proudly leading the way into the next generation of Sennheiser’s highly regarded MOMENTUM line, the M2 OEBT brings you freedom of movement and total purity of sound.
M2 OEBT | 5 The MOMENTUM Wireless (M2 OEBT) Bluetooth The MOMENTUM Wireless (M2 OEBT) headphones comply with the Bluetooth technology 4.0 standard and are compatible with all Bluetooth 1.1, 1.2, 2.0, 2.1, 3.0 and 4.0 devices with the following profiles: • Headset Profile (HSP) 1.
6 | M2 OEBT Pack age includes P ackage includes MOMENTUM Headphones Carry case Sof t carry case Audio cable with 2.5 mm and 3.5 mm jack plug USB cable with micro USB connector In-flight adapter Quick guide Quick guide Safety guide Safety guide A list of accessories can be found at www.
M2 OEBT | 7 Product overview Product overview Overview of the headphones 1 Headband 6 LED 2 Ear pads 7 Power button 3 Ear cups 8 3-way multi-function button 4 Microphone 9 Audio input 5 NFC antenna 0 .
8 | M2 OEBT Product overview Pictograms for the LED Pictogram Meaning The LED lights up Time interval or interruption. Causes the LED to flash The LED lights up/flashes continuously 3s 3s Time interva.
M2 OEBT | 9 Product overview Overview of the LED indications LED indications during operation LED Meaning The headphones switch on Pairing with a device is successful The headphones switch off 1s The .
10 | M2 OEBT Product overview Overview of buttons Power button Press Function Page 2s Switches the headphones on and off 17 3-way multi-function button Press Function Page 1x Accepts/ends a call Accep.
M2 OEBT | 11 Getting started Getting started Charging basics A complete charging cycle takes about 3 hours. Before using the headphones for the first time, charge their rechargeable battery for a complete charging cycle without interruption.
12 | M2 OEBT Getting started Charging the headphones 1. Connect the micro USB plug of the charging cable to the micro USB input of your headphones. 2. Connect the USB plug to the USB port of your computer.
M2 OEBT | 13 Getting started P airing the headphones AUTION Danger of malfunction! The transmitted radio waves of mobile phones can impair the operation of sensitive and unprotected devices. X Only make calls with the headphones in locations where Blue- tooth wireless transmission is permitted.
14 | M2 OEBT Getting started Pairing the headphones with an NFC device 1. Activate the NFC function on your smartphone. 2. Place your smartphone close (less than 3 cm) to the NFC antenna on the lef t ear cup of the headphones. You hear the voice prompts “power on” and “pairing” and the LED flashes blue and red.
M2 OEBT | 15 Getting started Pairing the headphones with a Bluetooth device Ensure that your headphones are within the 20 cm range of your smartphone during this procedure. 1. Switch the headphones on (see page 17 ). Press the power button and keep it pressed until you hear the voice prompt “pairing” and the LED flashes blue and red.
16 | M2 OEBT Getting started Disconnecting the headphones from an NFC or Bluetooth device X Disable the Bluetooth visibility on your smartphone. The headphones are disconnected from the smartphone, and you hear the voice prompt “disconnected” . The headphones then search for previously paired devices.
M2 OEBT | 17 Using the headphones Using the headphones Switching the headphones on W ARNING Danger due to high volume levels! Listening at high volume levels for long periods of time can lead to permanent hearing defects. X Before putting the headphones on, set the volume to a low level.
18 | M2 OEBT Using the headphones Adjusting the volume W ARNING Danger due to high volume levels! Listening at high volume levels for long periods of time can lead to permanent hearing defects. X Before putting the headphones on, set the volume to a low level.
M2 OEBT | 19 Using the headphones Checking the remaining battery life You can check the remaining play and talk time of the battery at any time ex- cept when you are on an active call or listening to music. X Press the 3-way multi-function button 3 times quickly.
20 | M2 OEBT Using the headphones Music functions The following music functions are only available if the headphones and the smartphone are connected using Bluetooth wireless technology or if the USB cable is used. Some smartphones may not support all functions.
M2 OEBT | 21 Using the headphones Call functions The following call functions are only available if the headphones and the smart- phone are connected using Bluetooth wireless technology or if the USB cable is used. Some smartphones may not support all functions.
22 | M2 OEBT Using the headphones T ransferring the call to/from the headphones On ce the connection is established, you can transfer the call between the head- phones and your smartphone.
M2 OEBT | 23 Using the headphones Redialing The redialing function must be supported by your smartphone or Bluetooth de- vice (with HFP profile). This function may be required to be activated on your device.
24 | M2 OEBT Using the headphones Using the audio cable There are 2 connection modes when you use the audio cable: X Active mode - the audio cable is used and the headphones are switched on. X Passive mode - the audio cable is used and the headphones are switched off.
M2 OEBT | 25 Care and maintenance Care and maintenance CAUTION Liquids can damage the electronics of the product! Liquids entering the housing of the product can cause a short-circuit and damage the electronics. X Keep all liquids away from this product.
26 | M2 OEBT Care and maintenance Storage and handling T o keep the headphones in good condition and to avoid nicks and scratches, fold the ear cups inwards towards the headband. Store the headphones in a carry case when not in use or when transporting them.
M2 OEBT | 27 Care and maintenance Replacing/removing the rechargeable battery CAUTION Danger of damage to the product! During the warranty period, the rechargeable battery must only be replaced by an authorized Sennheiser service center, otherwise the warranty will be null and void.
28 | M2 OEBT T roubleshooting T roubleshooting Problem Possible cause Possible solution Page Headphones cannot be switched on Battery is empty Charge the headphones. 12 Battery is completely exhausted/worn out Visit an authorized Sennheiser service center for battery replacement.
M2 OEBT | 29 T roubleshooting Leaving the Bluetooth transmission range Wireless calling and streaming are only possible in the Bluetooth transmission range of your smartphone. The transmission range largely depends on environ- mental conditions such as wall thickness, wall composition etc.
30 | M2 OEBT Specifications Specifications M2 OEBT Ear coupling on -ear Frequency response 16 Hz - 22 kHz T ransducer principle dynamic, closed Frequency response (MIC) wideband: 100 Hz - 8 kHz narrowband: 300 Hz - 3.
M2 OEBT | 31 Manufacturer declarations Manufacturer declarations W arranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner.
32 | M2 OEBT Manufacturer declarations Statements regarding FCC and Industry Canada SE NNH EI SER M odel No : FC C De cl arat io n of Co nf or mi ty (D oC ) We , Se nnhe is er El ec tr oni c Co r pora.
M2 OEBT | 33 Manufacturer declarations RF Radiation Exposure Information Since the radiated output power of this device is far below the FCC / IC radio fre- quency exposure limits, it is not subjected to routine RF exposure evaluation as per Section 2.
Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 W edemark, Germany www.sennheiser.com Publ. 02/15, A03.
Ein wichtiger Punkt beim Kauf des Geräts Sennheiser M2OEBT (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sennheiser M2OEBT noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sennheiser M2OEBT - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sennheiser M2OEBT reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sennheiser M2OEBT erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sennheiser M2OEBT besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sennheiser M2OEBT verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sennheiser M2OEBT. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sennheiser M2OEBT gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
