Benutzeranleitung / Produktwartung 7T32 des Produzenten Seiko
Zur Seite of 23
INSTRUCTIONS (P. 3) INSTRUCTIONS (P. 24) INSTRUCCIONES (P. 45) BEDIENUNGSANLEITUNG (S. 66) ISTRUZIONI (P. 87) INSTRUÇÕES (P. 109) 用法説明 (130 頁 ) Cal.
English 2 You are now the proud owner of a SEIKO Analogue Quartz Watch Cal. 7T32. For best results, please read the instructions in this booklet carefully before using your SEIKO Analogue Quartz Watch. Please keep this manual handy for ready reference.
English 3 ENGLISH CONTENTS Page FEATURES .................................................................................................................. 4 DISPLAY AND CROWNS/BUTTONS ..................................................................
English 4 SEIKO ANALOGUE QUARTZ Cal. 7T32 FEATURES TIME/CALENDAR STOPWATCH ● Hour & minute hands with small second hand ● Date displayed in numerals ● Measures up to 30 minutes in 1/5 second increments. ● Can measure repeatedly up to 6 hours.
English 5 DISPLAY AND CROWNS/BUTTONS There are three buttons and two crowns. STOPWATCH 1/5 second hand STOPWATCH minute hand Minute hand (MAIN TIME) ALARM 1 2 3 9 10 11 5 25 30 10 20 MIN .
English 6 Pull out to first click . Turn clockwise until the date for the previous day appears. Pull out to second click and turn until the desired date appears. Push back in to normal position . 1 2 3 4 ▼ ▼ ▼ ➡ ➠ 3 ➠ 4 Date 1 Do not set the date between 9:00 p.
English 7 Pull out to second click when Second hand is at the 12 o’clock position. Turn to set Hour and Minute hands. Push back in to normal position in accordance with a time signal. Minute hand TIME SETTING 1 When setting Hour hand, check that AM/PM is correctly set.
English 8 ALARM ● Alarm time is set on a 12-hour basis. ● ALARM hands move independently of MAIN TIME hands. Minute hand (MAIN TIME) 1 Pull out to second click . Turn clockwise or counterclockwise to set ALARM hands to the current time (MAIN TIME).
English 9 2 Alarm time setting ▼ Press to set ALARM hands to the desired alarm time. ▼ Push back in to normal posi- tion . Pull out to first click . * Once ALARM hands are adjusted to the main time, alarm time setting can be made only by following the procedure below.
English 10 ALARM ENGAGEMENT/DISENGAGEMENT • Alarm engagement • Alarm disengagement Push back in to normal position . Pull out to first click . Current time 1 Alarm rings at the designated time for 20 seconds. * To stop it manually, press Button A, B or C , or push CROWN 2 back in to normal position.
English 11 ● Stopwatch measures up to 30 minutes in 1/5 second increments. ● After 30 minutes, it will start counting again from “0” repeatedly up to 6 hours. STOPWATCH STOPWATCH minute hand • Before using the stopwatch: • Check that CROWNS 1 and 2 are set at normal position .
English 12 1 Standard measurement START STOP RESET START SPLIT RELEASE STOP SPLIT * Measurement and release of split time can be repeated by pressing Button B . RESET 3 Split time measurement 2 Accumulated elapsed time measurement START RESTART STOP STOP RESET * Restart and stop of stopwatch can be repeated by pressing Button A .
English 13 START RESET 4 Measurement of two competitors 2ND COMPETITOR FINISHES FINISH TIME OF 1ST COMPETITOR FINISH TIME OF 2ND COMPETITOR 1 If CROWN 1 is pulled out to second click, STOPWATCH hands are reset to “0” position. 2 If CROWN 2 is pulled out to first or second click, STOPWATCH hands are reset to “0” position.
English 14 TACHYMETER (for models with tachymeter scale on the dial) * Tachymeter scale can be used only when the time required is less than 60 seconds.
English 15 To measure the hourly rate of operation Use the stopwatch to measure the time required to complete 1 job. 1 Tachymeter scale indicated by STOPWATCH second hand gives the average number of jobs ac- complished per hour.
English 16 ADJUSTING THE HAND POSITION ▼ Pull out to second click . Press repeatedly to reset STOPWATCH minute hand to the 12 o’clock position. ▼ Press repeatedly to reset STOPWATCH second hand to the 12 o’clock position. ▼ Push back in to normal posi- tion .
English 17 RESETTING THE BUILT-IN IC ● In case any of the hands should move improperly, follow the procedure below to adjust the hand movement. Pull out to second click . AND Press simultaneously. Push back in to normal posi- tion . ▼ ▼ 5 25 30 10 20 MIN.
English 18 BATTERY LIFE INDICATOR CAUTION Do not remove the battery from the watch. If it is necessary to take out the battery, keep it out of the reach of children.
English 19 TO PRESERVE THE QUALITY OF YOUR WATCH Condition of use WATER RESISTANT 5 BAR WATER RESISTANT No indication Indication on case back Non-water resistant Degree of water resistance* Accidental.
English 20 ● Non-water resistant • If the watch becomes wet, have it checked by an AUTHORIZED SEIKO DEALER or SERVICE CENTER. ● Water resistant 5/10/15/20 bar • Before using in water, be sure the crowns are pushed in completely. • Do not operate the crowns and buttons when the watch is wet or in water.
English 21 ■ TEMPERATURES Your watch works with stable accuracy within a temperature range of 5 ° C and 35 ° C (41 ° F and 95 ° F). Temperatures over 60 ° C (140 ° F) may cause battery leakage or shorten the battery life.
English 22 ■ CHEMICALS cosmetic spray, detergents, adhesives or paints. Otherwise, the case, bracelet, etc. may become discolored, deteriorated or damaged.
English 23 SPECIFICATIONS 1 Frequency of crystal oscillator ................ 32,768 Hz (Hz = Hertz ... Cycles per second) 2 Loss/gain (monthly rate) ......................... Less than 15 seconds at normal temperature range (5 ° C ~ 35 ° C) (41 ° F ~ 95 ° F) 3 Accuracy of alarm .
Ein wichtiger Punkt beim Kauf des Geräts Seiko 7T32 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Seiko 7T32 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Seiko 7T32 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Seiko 7T32 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Seiko 7T32 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Seiko 7T32 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Seiko 7T32 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Seiko 7T32. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Seiko 7T32 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
