Benutzeranleitung / Produktwartung 6M26 des Produzenten Seiko
Zur Seite of 29
INSTRUCTIONS (P. 3) INSTRUCTIONS (P. 30) INSTRUCCIONES (P. 58) BEDIENUNGSANLEITUNG (S. 86) ISTRUZIONI (P. 114) INSTRUÇÕES (P. 143) 用法説明 (171 頁 ) Cal.
English 2 You are now the proud owner of a SEIKO Analogue Quartz Watch Cal. 6M25/6M26. For best results, please read the instructions in this booklet carefully before using your SEIKO Analogue Quartz Watch. Please keep this manual handy for ready reference.
English 3 ENGLISH CONTENTS Page FEATURES .................................................................................................................. 4 MODES AND DISPLAYS ..........................................................................
English 4 SEIKO ANALOGUE QUARTZ Cal. 6M25, 6M26 FEATURES TIME TIMER ● Hour, minute & second hands ● Up to 60 minutes can be set in minute increments. CALENDAR ● Date displayed in numerals ● Month indicated by hands ● Calendar adjusts automatically except February of leap years.
English 5 MODES AND DISPLAYS [Cal. 6M26] There are two buttons and a crown. a: Normal position b: Extended position Date Date CROWN B A a b Hour hand Minute hand Hour hand Minute hand Second hand MODE INDICATOR MODE INDICATOR 5 A B a b Second hand 5 [Cal.
English 6 MODE CHANGE CROWN Turn at normal position clockwise or counterclockwise. Time setting ➡ Pull out CROWN . ➡ Adjusting hand & date positions Pull out CROWN .
English 7 ADJUSTING THE HAND AND DATE POSITIONS ● Before setting the time and calendar, be sure to use STOPWATCH mode to check the positions of Hour, Minute and Second hands and the date numeral.
English 8 Minute hand B Press to select what is to be ad- justed (hands or date) in the fol- lowing order (See *1 on page 22) : ▲ Second hand Hour hand Date ▲ ▲ ▲ A CROWN ▼ Push back in to normal position .
English 9 TIME SETTING CROWN Turn to set MODE INDICATOR to “TIME” or “ALM.ON”. CROWN Pull out. Second hand Minute hand Hour hand ➡ B A CROWN Push back in to normal position in accordance with a time signal. ▼ ▼ ▼ B A CROWN ➠ ➠ 5 5 Press to set Minute hand.
English 10 CALENDAR ● The month is indicated by the hour marker that all three hands point to. ● The date is indicated by the numeral shown in the calendar frame. ● The calendar automatically adjusts for odd and even months except February of leap years.
English 11 ALARM ALARM SETTING ● The alarm can be set to ring on a 12-hour basis. CROWN B B A ➡ Hour hand Minute hand 10 A ▼ ▼ CROWN Turn to set MODE INDICATOR to “ALM.ON” or “TIME” to engage or disengage the alarm. (See the following section) Turn to set MODE INDICATOR to “ALM.
English 12 ALARM ENGAGEMENT/DISENGAGEMENT • Alarm engagement • Alarm disengagement CROWN Turn to set MODE INDI- CATOR to “ALM.ON”. (See also *6 on page 22) CROWN Turn to set MODE INDI- CATOR to “TIME”.
English 13 ● The timer can be set to count down up to 60 minutes in minute increments. TIMER CROWN Turn to set MODE INDICATOR to “TIMER”. ● Before setting the timer, check that the three hands are at “0” position. TIMER SETTING A Press to set the desired amount of time in minutes.
English 14 TIMER OPERATION B ➡ START B STOP ➡ B RESTART ➡ B STOP ➡ A RESET * Restart and stop of timer can be repeated by pressing Button B . B A 10 ● When the set time is up, a warning sound beeps for approximately 5 seconds. * To stop it manually, press Button A or B .
English 15 ● Stopwatch measures up to 60 minutes in 1/10 second increments. STOPWATCH CROWN Turn to set MODE INDICATOR to “CHRONO.”. Second hand Minute hand Hour hand 1/10 seconds Seconds Minutes ➡ ➡ ➡ ● In the following cases, the stopwatch operations cannot be made: 1) While the timer warning sound is beeping (for about 5 seconds).
English 16 • For the first 1 minute Ex.: 20 and 7/10 seconds • After the first 1 minute Ex.: during measurement Ex.: when measurement is stopped or split time is measured Minute hand Second hand 1/10 second hand** Minute hand 10 10 1/10 second hand*** Minute hand Second hand * 1/10 second hand moves from 0 to 9 (minute markers) repeatedly.
English 17 B A A B START SPLIT RELEASE STOP SPLIT * Measurement and release of split time can be repeated by pressing Button A . A RESET 3 Split time measurement B B B B START RESTART STOP STOP A RESET 2 Accumulated elapsed time measurement * Restart and stop of stopwatch can be repeated by pressing Button B .
English 18 TACHYMETER (for models with tachymeter scale on the dial) To measure the hourly average speed of a vehicle Use the stopwatch to determine how many seconds it takes to go 1 km or 1 mile. 1 Tachymeter scale indicated by Second hand gives the average speed per hour.
English 19 To measure the hourly rate of operation Use the stopwatch to measure the time required to complete 1 job. 1 Tachymeter scale indicated by Second hand gives the average number of jobs accomplished per hour. 2 “180” (tachymeter scale figure) x 1 job = 180 jobs/hour Ex.
English 20 NECESSARY PROCEDURE AFTER BATTERY CHANGE ● When the battery is replaced, the information stored in the IC does not correspond with the time and date actually displayed. Before using the watch, therefore, be sure to reset the hands and date, following the procedure below.
English 21 Minute hand B Press to select what is to be ad- justed (hands or date) in the fol- lowing order (See *1 on page 22) : ▲ Second hand Hour hand Date ▲ ▲ ▲ A ▼ ▼ CROWN ▼ Press to reset the selected hand to the 12 o’clock position or set the date to “1”.
English 22 NOTES ON OPERATING THE WATCH *1 When a hand is selected, it will move back and forth and return to where it was. When the date is selected, it will advance one day and return to the current date. *2 The hand(s)/date move(s) quickly if the corresponding button is kept pressed for 2 seconds.
English 23 *8 Remarks on stopwatch operation: • With each press of the buttons, a beep sounds for confirmation. • Even if the mode is changed from STOPWATCH to another while the stopwatch is measuring, it continues counting. If the split time is measured, however, it will be released and counting will be continued by changing the mode.
English 24 BATTERY LIFE INDICATOR BATTERY CHANGE The miniature battery which powers your watch should last approximately 2 years . However, because the battery is inserted at the factory to check the function and performance of the watch, its actual life once in your possession may be less than the specified period.
English 25 WARNING CAUTION ● Do not remove the battery from the watch. ● If it is necessary to take out the battery, keep it out of the reach of children. If a child swallows it, consult a doctor immediately. ● Never short-circuit, tamper with or heat the battery, and never expose it to fire.
English 26 TO PRESERVE THE QUALITY OF YOUR WATCH Condition of use ■ WATER RESISTANCE WATER RESISTANT 5 BAR WATER RESISTANT No indication Indication on case back Non-water resistant Degree of water r.
English 27 ● Non-water resistant ● Water resistant 5/10/15/20 bar • If the watch becomes wet, have it checked by an AUTHORIZED SEIKO DEALER or SERVICE CENTER. • Before using in water, be sure the crown is pushed in completely. • Do not operate the crown and buttons when the watch is wet or in water.
English 28 ■ CARE OF CASE AND BRACELET To prevent possible rusting of the case and bracelet, wipe them periodically with a soft dry cloth. ■ PERIODIC CHECK It is recommended that the watch be checked once every 2 to 3 years.
English 29 SPECIFICATIONS 1 Frequency of crystal oscillator ........... 32,768 Hz (Hz = Hertz ... Cycles per second) 2 Loss/gain (monthly rate) .................... Less than 15 seconds at normal temperature range (5 ° C ~ 35 ° C) (41 ° F ~ 95 ° F) 3 Operational temperature range .
Ein wichtiger Punkt beim Kauf des Geräts Seiko 6M26 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Seiko 6M26 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Seiko 6M26 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Seiko 6M26 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Seiko 6M26 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Seiko 6M26 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Seiko 6M26 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Seiko 6M26. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Seiko 6M26 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
