Benutzeranleitung / Produktwartung 274.4392839 des Produzenten Sears
Zur Seite of 39
I OWNER'S MANUAL MODEL NO. 274.43928390 SERIES Record the Model No. and the Serial No. of your television in the space provided. Model No. Serial No.
Safety Precautions I WARNING: To prevent fire or shock hazard, do not [ I expose this TV to rain or moisture. CAUTION: Avoid placing drinks or vases with water on top of your TV. If you suspect that liquid has entered the TV, unplug it immediately and contact a Sears Service Center.
Getting Started First-Time Operation The steps below will help you get your TV connected and x, orking quickly. The page numbers on which you can find detailed instructions for each of these steps are also listed for your convenience. 1. Unpack TV and accessories.
Getting Started of geomagnetism (Earth's magnetic field) may cause the picture to tilt slightly. The POLARITY and STRENGTH switches on the back of the TV let you compensate for this effect. If the picture appears tilted, follow these steps to improve it.
Controlling Your TV Front Panel Controls Shown here are the front panel controls. The controls on your TV resemble the picture below. 1 I O o ooooooo (_ CHV CH_, VOL-- VOL+ qo / _UDtO VIDEO SETUP O _ () ] i i POWER Button • Press once to turn on TV.
Controlling Your TV On-Screen Displays (_ Time Sleep Timer Parental Contro ® ® Channel Channel Label Captioning MUTE Commercial Skip O ® ® ® Time Display This display appears (after the clock is set) whenever you change channels or press the remote's TV or DISPLAY button.
Controlling Your TV Remote Control Operation Before attempting to operate your remote control, install the batteries as shown here. Your remote control is designed to be very rugged and will withstand a considerable drop. If it receives an extreme blow, the case is designed to slightly separate at the seam rather than fracture.
Controlling Your TV Remote Control Operation (continued) ® ® DSPY (Display) Button • Displays time (if clock has been set) and channel number on the TV screen. • Quickly removes menus and displays from the screen. TV Button • Turns on TV and puts remote in "TV Mode" so that the other remote buttons will control the TV.
Operating Features VIDEO Button Repeatedly press the VIDEO button to select (highlight) the video function you want to adjust, then press + or - to adjust it to your personal preference. Pressing the RES/MEM button lets you move back up the screen (one item per press).
Operating Features AUDIO Button Repeatedly press the AUDIO button to select (highlight) the function you want to change, then press + or - to change the setting. Pressing the RES/MEM button lets you move back up the screen (one item per press). _i _ i _ _:ii_i_!:!iil I RES/MEM AUDIO Speakers: On The TREBLE function adjusts the high frequency audio.
Operating Features SETUP Button Repeatedly press the SETUP button to select (highlight) the function you want to adjust, then press + or - to change or set it.
Operating Features Closed Captioning The CAPTIONING feature lets you display the audio portion of a program as text on the TV screen. This is useful to the hearing impaired or anyone who wants to watch a program without the sound. There are four types of closed captioning transmissions available: Captions 1 and Captions 2, Text 1 and Text 2.
Operating Features Sleep Timer Operation By setting the Sleep Timer. you can program your TV to turn itself off after a certain period of time (up to four hours). This is useful whenever you want to watch TV for an hour or so before going to sleep. Setting Sleep Timer 1.
Operating Features Alarm Timer Operation By setting the alarm, you can program the TV to turn on and/or off by itself. Setting the Alarm 1. Repeatedly press the SETUP button After the ON TIME is set a.
Operating Features Labeling Channels The labeling feature lets you program names (or labels) for the channel numbers. The name you program will then appear on the screen below the channel number whenever the channel number is displayed. Each name can contain up to four characters, and you' tl be able to assign up to 64 names.
Operating Features Parental Control The PARENTAL CTRL and CHAN CTRL functions let you lock out any Activating Parental Control (with remote only) The PARENTAL CTRL and the CHAN 2. To lock out channels, press the channels you choose so they cannot be viewed by your children.
Operating Features Programming Channel Memory 'he channel memory is the list of TV channel numbers your TV will stop on when you press the CHANNEL up or down button. You can program any list of channels into the channel memory. The quickest way to program your channel memory is to use the AUTOPROGRAM function.
Operating Features VCR Channel Setup The VCR 1 CHAN function lets you program to which channel the TV will automatically tune when you press the VCR 1 button on the remote. This is handy if you connect a, VCR to your TV. You will no longer have to remember to which input jacks the VCR is connected because the TV will remember for yOU.
Operating Features Cable Box Setup l'he CABLE CHAN function lets you program to which channel the TV will automatically tune when you press the CABLE button on the remote. This is handy if you have to connect a cable box to your TV. You will no longer have to remember the output channel of the cable box because the TV will remember for yOtl.
Connecting Your Monitor Panel @ CAUTION TO AVOID DAMAGE: 1. DO NOT CONNECT SPEAKER OUTPUT TO A SEPARATE AMPLIFIER OR TO SPEAKERS CONNECTED TO ANOTHER PRODUCT. 2, DO NOT CONNECT LEFT AND RIGHT SPEAKER OUTPUTS TOGETHER. i O ® ® EXTERNAL SPEAKERS Terminals-permit direct connection of auxiliary speakers.
Connecting Your TV Home Antenna Connections Follow one of the steps below to connect an indoor or outdoor antenna to your TV (only if you do not have a cable-TV system).
Connecting Your TV Cable-TV Connections Follow one of these steps to connect a cable-TV system to your TV instead of a home antenna. Since cable-TV systems vary, you may wish to consult your local cable-TV company for additional information.
Connecting Your TV Cable-TV Operation 'four new TV is designed to receive up to 181 channels in the U.S.A. including 125 non-scrambled cable channels (see chart below). To use this TV on a cable- 'IV system, confirm that the cable-TV system is properly connected to your TV.
Connecting Your TV Programming Remote to Control Cable Box If your cable box has its own remote to change channels, you will probably be able to program the TV's remote to control both the TV and the cable box. The TV's remote is designed to control several brands of cable boxes.
Connecting Other Components Tips to Read Before Connecting Components Stacking Arrangements If you are connecting several components and plan to use a component rack, follow these general rules when arranging your components.
Connecting Other Components S-VHS or Standard VHS Camcorder (This connection allows you to play back tapes in the camcorder and watch them on the TV.) ADAPTOR Connector Jack " S- VIDEO .... Output Jack Auto AudioNideo Output Adapter (_) (_ (usually supplied with _ Back of TV _r _Eu_cr otn camcorder) i {_)L (_) Video Out Audio.
Connecting Other Components Standard VHS VCR (Not S-VHS) (These connections allow you to record TV programs and play back tapes.) Preferred Method 2-Way Signal Splitter* / mln _/ IN F_)ANT OUT TO TV C.
Connecting Other Components Special Recording onto VCR (This connection only allows you to record on the VCR whatever is currently being displayed on the TV screen) This is not a common application for recording with your VCR, but you may find it useful in I certain situations.
Connecting Other Components Remote Buttons that Control Compatible VCRs /'he remote control that came packed with your TV has buttons that allow you to control some functions of a compatible VCR; and to do that, you must press the VCR 1 or VCR 2 button to put the remote in the "VCR mode".
Connecting Other Components Controlling Compatible VCRs The digital remote control that came packed with your TV controls your TV and up to two compatible VCRs, including most other brands. To program the remote, just press VCR 1 (or VCR 2), then SETUP, then the two-digit code number for your brand of VCR.
Connecting Other Components Amplifier or Cassette Tape Deck Audio Amplifier ! Back of TV AudioNideo Cables* If your stereo amplifier is not part of a "system" that has its own remote, connect it to the TV as shown here.
Connecting Other Components Computers and Other Equipment with Audio/Video Outputs Back of "IV AUDIO @:@ HI-FI - OUT - SELECT @.@ If the INPUT 1 jacks already have another component connected to them, you can connect the computer to the INPUT 2 jacks.
Connecting Other Components Speakers Speakers Caution: Do not connect external speakers to more than one audio source at a time. You can connect a set of speakers to either the TV or the Amplifier but not to both at the same time. If you connect the same speakers to both the TV and the amplifier, you will damage your equipment.
Caring for Your TV Trouble Checks Before you call or take your unit to a Sears Service Center, look below for the type of trouble you are experiencing.
Caring for Your TV Trouble Checks (continued) Noisy stereo reception No picture, no sound but power light is on Sound okay, picture poor Picture okay, sound poor No stereo on known stereo station When menu is displayed, pressing RES/MEM does not go to previous function.
Caring for Your TV Cleaning and Care Dust TV as required, using a soft cloth or the dusting attachment of your vacuum cleaner. Occasionally vacuum the ventilation slots in the cabinet to help assure adequate ventilation. Take care not to scratch the plastic surfaces.
Index + and - Buttons ................... 2,3,4,7,8,9,10 A Adding Channels to Memory ................ 16 A I.ARM Function ............................. 10, !3 Amplifier ............................................... 30 Antenna Connections ...........
37.
OWNER'S MANUAL MODEL NO. 274.43928390 SERIES WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION: 1. NAME OF ITEM Sears Color Television Receiver 2.
Ein wichtiger Punkt beim Kauf des Geräts Sears 274.4392839 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sears 274.4392839 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sears 274.4392839 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sears 274.4392839 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sears 274.4392839 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sears 274.4392839 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sears 274.4392839 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sears 274.4392839. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sears 274.4392839 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
