Benutzeranleitung / Produktwartung POA-PN01A des Produzenten Sanyo
Zur Seite of 84
PJ-Net Organizer Model No. POA-PN01A OWNER’S MANUAL INSTALLATION and OPERATION of the PJ-Net Organizer This PJ-Net Organizer is an optional product to control and set up a projector via a network. Attach this prod- uct to the projector and connect a network cable.
2 Preparation Compliances Federal Communication Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
3 PJ-Net Organizer OWNER’S MANUAL Preparation ENGLISH Expression/Abbreviation The following abbreviations may appear in this manual: ● Windows 95, Windows 98, Windows 2000, Windows Me, Windows XP, Windows NT4.
4 Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Installation . . . . . . . . . . . . . . . . . . . .
5 PJ-Net Organizer OWNER’S MANUAL Contents ENGLISH Image Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Sound Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 Screen Adjustment . . . . . .
6 Preparation Features W eb Management function With this function, you can monitor projector functions such as power status, lamp status, input mode, signal condition, lamp-use time, etc. through the network by using the web browser installed on your computer.
7 PJ-Net Organizer OWNER’S MANUAL Features ENGLISH Multi-control function A single computer can control and set up the multiple computers at the same time. Automatic On/Of f using Timer function Automatically turn on or off the projectors at specified date/day and time by using the clock function.
8 Preparation Operating Envir onment To perform the management and setting up the projector using this product, the envi- ronment described below is required. Operating System Windows 95 / Windows 98 / Windows 2000 / Windows Me / Windows NT / Windows XP Mac OS 8.
Installation 1 9 PJ-Net Organizer OWNER’S MANUAL ENGLISH.
10 Installation The following are instructions for attaching this product to the projector and connect- ing it to the network. Please review the entire procedure to become familiar with it. Chec k package (p.11) 1 Installation (p.12-14) 2 Netw ork configuration (p.
11 PJ-Net Organizer OWNER’S MANUAL Name and function of each part ENGLISH Name and function of each part.
12 Installation [1] Mounting 1 Disconnect the AC plug from the projector. 2 Remove the connector cover and screw covers from the pro- jector and insert plug on this product to the option connector. 3 Tighten two screws by using a coin etc. ✐ The AC cord must be disconnected from AC power outlet when mounting or removing this product.
13 PJ-Net Organizer OWNER’S MANUAL Connection of LAN cable ENGLISH [2] Connection of LAN cable To connect to the network, it is required to use the UTP (Unshielded Twisted Pair) strait cable with RJ-45 plug. There are two different types of cables depending on whether the network is constructed with 10Base-T or 100Base-TX.
14 Installation [3] Confirmation of network menu activity When installing this product onto the projector, the network on-screen menu items for this product are activated automatically. If not activated, the product may not have been installed correctly.
15 PJ-Net Organizer OWNER’S MANUAL Network configuration ENGLISH Configure the network with the projector Tu rn the projector on and display the netw or k setting menu on the screen.
16 Installation Configure the network with the pr ojector This example explains how to set the following configuration. IP Address : 192.200.1.201 Subnet Mask : 255.255.255.0 Default Gateway : 192.200.1.1 DNS : 0.0.0.0 A 1 Selection of network menu [PJ-Net Organizer] Turn on the projector and display the menu on the screen.
17 PJ-Net Organizer OWNER’S MANUAL Network configuration ENGLISH How to enter the numbers To move the selection and change the values, Use the pointers ▲ / ▼ // on the projector or on the remote control handset. The / keys are used to move the selection item.
18 Installation Configure the network with the computer This example explains how to set the following configuration. The default network configuration is set as follows. Make sure that the projector is connected to the network and then connect the AC cord to the outlet.
19 PJ-Net Organizer OWNER’S MANUAL Network configuration ENGLISH ✐ If you use a cable to connect the projector and computer directly, without using a hub, you must use a UTP cross cable. In this case, you cannot access the login page if the setting of web browser is set to “Use proxy server”.
20 Installation Configure the network of computer When you use the projector through the network, the IP address of the pro- jector must be the same IP network number of the existing network. Also it is required to use the same IP network number of the computer to set up the projec- tor.
21 PJ-Net Organizer OWNER’S MANUAL Configure the network of computer ENGLISH W indows 2000/NT4.0 This example explains how to set the following network address.
22 Installation W indows XP This example explains how to set the following network address. 1 Select the Control Panel menu from the [Start] menu. Click the Network and Internet Connection and then click the Network on the control panel. 2 Click the Local Area Connection icon with right button of the mouse and then select the Property menu.
23 PJ-Net Organizer OWNER’S MANUAL Configure the network of computer ENGLISH Macintosh This example explains how to set the following network address.
24 Installation Notice about system construction For installation of multiple projectors into the same network with PJ-Net Organizer. Do not install multiple projectors with PJ-Net Organizers that have their default net- work settings to the same network.
Basic Setting and Operation 25 PJ-Net Organizer OWNER’S MANUAL ENGLISH 2.
26 Basic Setting and Operation This chapter describes basic operations and settings for controlling the projector via a network using this product. It is required that computer and projector are connected to the network and the network address be properly configured.
27 PJ-Net Organizer OWNER’S MANUAL Login or logout the setting page of the projector ENGLISH 3 Display of main setting page The following main setting page of the projector is displayed. Perform the various kinds of setting through this page. Click on the linked text to display the control and setting pages.
28 Basic Setting and Operation Initial Settings After installing this product onto the projector, perform the following basic initial setting. Click on the Initial Setting on the main menu to display the initial setting page. The Languages, Date/Time and Password can be set in this page.
29 PJ-Net Organizer OWNER’S MANUAL Initial Setting ENGLISH 2 Date/Time Setting Set present date and time by using the pull down menu buttons and press each Set button. Confirm that the date and time are set correctly. The displayed date and time are not updated automatically, press the Refresh button to get the current date and time.
30 Basic Setting and Operation Network Configuration Click on the Network Setting linked text on the main menu. The following setting page is displayed. This page is to set the IP Address, Subnet Mask, Default gateway, DNS (Domain Name Server) and projector name.
31 PJ-Net Organizer OWNER’S MANUAL E-mail Setting ENGLISH E-mail Setting This product has an E-mail function which can send an alert message to users or an administrator if it detects an abnormality on the projector or run out of the life span of the lamp.
32 Basic Setting and Operation Examples: Type and contents of alert mail When the projector has an abnormality, the following alert messages are sent to the registered E-mail address according to your selected condition. Administrator or user can take an efficient action quickly by receiving this massage.
Contr olling the Projector 33 PJ-Net Organizer OWNER’S MANUAL ENGLISH 3.
34 Contr olling the Pr ojector ✐ The projector is not turned on for about 90 seconds after switching into the standby mode. After the power status indicator on the control page changes from "On Cooling down" to “OFF”, then try to turn on the projector with On button.
35 PJ-Net Organizer OWNER’S MANUAL Power on/off the projector ENGLISH Items Description Accumulated lamp-use time It displays in 1 hour units (h) When resetting the lamp counter, this time will be reset to 0. Accumulated projector-use time It displays the accumulated used time in an hour unit (h).
36 Controlling the Projector Contr ol the pr ojector Click on the Control linked text on the main menu. The control menu will be dis- played on the lower side of the page. When you click each control icon, the control page is displayed according to the control menu you selected.
37 PJ-Net Organizer OWNER’S MANUAL Control the projector ENGLISH PC Adjustment This function is to adjust the signal from the computer connected to the projector to obtain the proper picture image on the screen. The available parameters and operation are listed below.
38 Controlling the Projector SYSTEM Adjustment This function is to select the color system of video signal or scanning sys- tem of component signal input to the projector. Select a system with the radio buttons to match the color system or scanning system of input source, and then press the Set button.
39 PJ-Net Organizer OWNER’S MANUAL Control the projector ENGLISH Image Adjustment This function is to adjust the projected picture image and set the image mode.
40 Controlling the Projector Screen Adjustment This function is to adjust the screen mode of the projector. The setting items are switched automatically according to selected input mode, com- puter or video input. The adjustment items and operation are listed below.
41 PJ-Net Organizer OWNER’S MANUAL Control the projector ENGLISH Setting This function is to set up the projector. The value next to each setting rep- resents the current status or mode. The setting items and operation are listed on the next page. Check if High speed control mode.
42 Controlling the Projector Setting items Operation Language Select the language used in the on-screen menu of the projector. Select your desired language with the pull down menu button, and then press the Set button. Keystone Correct the distortion of the projected image with the Left , Right , Up and Down buttons.
43 PJ-Net Organizer OWNER’S MANUAL Control the projector ENGLISH How to set the Timer This function is used to turn the projector off or on at a preselected day/date and time.
44 Controlling the Projector ✐ The timer operates by using the clock function provided in this product. Before setting the timer, please confirm that the current date and time are set correctly. Timer and clock func- tions are functioning using a lithium battery provided in this product.
45 PJ-Net Organizer OWNER’S MANUAL Control the projector ENGLISH Service This function sets parameters for service items of the projector. As these service items are used mainly for maintenance, please use the default set- ting unless a change is needed.
46 Controlling the Projector Save Actual Adjustment This function is to save and load the control values of the projector. The storable control items are Input, PC, System, Image and Screen controls, and these control items differ from each selected input mode and functions of the projector you use.
47 PJ-Net Organizer OWNER’S MANUAL Control the projector’s menu ENGLISH Contr ol the pr ojector's menu Click on the Display Menu on the main menu. The following menu control page is displayed. This page is to control the on-screen display menu of the projector.
48 Controlling the Projector.
Contr olling the Multi-Projectors 49 PJ-Net Organizer OWNER’S MANUAL ENGLISH 4.
50 Contr olling the Multi-Pr ojectors * Normally, the projector in the network is recognized with the IP address. This product allows you to name the projector instead of the IP address. By registering the projector’s nickname like “MeetingRoom101”, it can be managed and recognized easily.
51 PJ-Net Organizer OWNER’S MANUAL Multi-control ENGLISH ✐ If you not register the projector name, the word “None” is displayed on the projector name column.
52 Controlling the Multi-Projectors Load and apply the setting value The control sets saved for each projector (p. 46) can be used while the multi-con- trolled projectors function is being used. Select a setting number from the item Load Setting No. with the pull down menu button and then press the Set button.
53 PJ-Net Organizer OWNER’S MANUAL Control multi- projectors at the same time ENGLISH Status If some of the registered projectors are deactivated by some means (such as discon- necting the power sou.
54 Controlling the Multi-Projectors Selection of another pr ojector When you register the projectors for the multi-control, the IP addresses of the regis- tered projectors are listed on the "Change a Projector" menu on the lower left side of the page.
Contr olling Exter nal Equipment 55 PJ-Net Organizer OWNER’S MANUAL ENGLISH 5.
56 Contr olling External Equipment ✐ Exclusive driver software for control of the external equipment is required. This product does not provide any driver software. Please consult your local dealer. ✐ There are 2 types of RS-232C serial cable, Normal and Reverse type.
57 PJ-Net Organizer OWNER’S MANUAL Serial port setting ENGLISH Serial port setting Set up the extra serial port of this product. Click on the Extra Serial Port Setting linked text on the main menu and the following setting page will be displayed.
58 Controlling External Equipment Use of T elnet The following is a control example of external equipment connected to this product by using the telnet application* 1 installed on your computer. The telnet application is needed to use commands* 2 which controls the external equipment.
59 PJ-Net Organizer OWNER’S MANUAL Use of telnet ENGLISH 3 The following window will appear. Type as follows and then press the Connect button. Host name : 192.168.0.2 (type projector IP address) Port : telnet or 23 Terminal type : vt100 4 When communication is established, the word "PASSWORD:" appears on the win- dow.
60 Controlling External Equipment.
Appendix:A 61 PJ-Net Organizer OWNER’S MANUAL ENGLISH 6 Connection examples Web browser setting Technical data.
62 Appendix Examples of Connection Peer-T o-Peer connection Connect the projector (PJ01) to the control computer (PC05) directly Projector Name: PJ01 IP Address : 192.168.0.2 Subnet Mask : 255.255.255.0 Default Gate way : 0.0.0.0 DNS : 0.0.0.0 Computer Name: PC10 IP Address : 192.
63 PJ-Net Organizer OWNER’S MANUAL Examples of connection ENGLISH The gateway (Router) installed in the network Connect the projector (PJ01) to the control computer (PC05) via the gateway. To another network Network Group: 192.168.200.0 Network Group: 192.
64 Appendix W eb browser setting This product is designed enable the projector to be set up and controlled from an Internet web browser. Depending on the preference settings of the web browser, some control functions may not be available. Please make sure that the following functions are set up properly in the web browser.
65 PJ-Net Organizer OWNER’S MANUAL Appendix ENGLISH Setting examples: OS/Br owsers W indows 95/98 Internet Explorer v.5.5 Cookies setting Select the Internet Options menu from the Tool menu on the web browser and then select Security tab and press the Customize Level… button.
66 Appendix Proxy setting Select the Internet Options menu from the Tool menu on the web browser and then select Connection tab and press the LAN Settings button. Properly set up your web browser's the proxy server settings according to the local area network environment to which the projector is connected.
67 PJ-Net Organizer OWNER’S MANUAL Appendix ENGLISH Netscape Navigator v.4.7 Cookies setting Select the Preference menu from the Edit menu on the web browser and then select the item Advanced in the Category column. Make sure that the Allow all cookies is checked in the Cookies column.
68 Appendix Proxy setting Select the Preference menu from the Edit menu on the web browser and then select the item Advanced/Proxies in the Category column. Properly set up your web browser's the proxy server settings according to the local area network environ- ment to which the projector is connected.
69 PJ-Net Organizer OWNER’S MANUAL Appendix ENGLISH Mac OS 8.6 Internet Explorer v.5.0 Cookies setting Select the Preference menu from the Edit menu on the web browser and then select Cookies under the Receiving Files heading the preference settings window.
70 Appendix Proxy setting Select the Preference menu from the Edit menu on the web browser and then select Proxies under the Network heading the preference settings window. Properly set up your web browser's the proxy server settings according to the local area network envi- ronment to which the projector is connected.
71 PJ-Net Organizer OWNER’S MANUAL Appendix ENGLISH Netscape Navigator v.4.7 Cookies setting Select the Preference menu from the Edit menu on the web browser and then select the item Advanced in the Category column. Make sure that Accept all cook- ies is checked in the Cookies column.
72 Appendix Proxy setting Select the Preference menu from the Edit menu on the web browser and then select Proxies under the Advanced heading in the Category column. Properly set up your web browser's the proxy server settings according to the local area network environment to which the projector is connected.
73 PJ-Net Organizer OWNER’S MANUAL Specifications ENGLISH Pr oduct specification Type ......................................PJ-Net Organizer LAN interface .
74 Appendix LAN port specification Port Specification Serial port specification pin No. Signal Function 1 TX+ Transfer data (+) 2 TX- Transfer data (-) 3 RD+ Receive data (+) 4 (not used) 5 (not used) 6 RD- Receive data (-) 7 (not used) 8 (not used) 12 3 4 5678 8-pin modular connector (RJ-45) Pin No.
Appendix:B FA Q 75 PJ-Net Organizer OWNER’S MANUAL ENGLISH.
76 Appendix FA Q Why doesn’t the setting page appear in my web browser? F ollowing causes are possible. Please check them. 1. The projector does not connect to the network. Check LED indicators status (p.11). - Check the connection of LAN cable if the LINK indicator does not illuminate orange.
77 PJ-Net Organizer OWNER’S MANUAL Appendix ENGLISH 3. Enter the projector’s IP address [192.168.0.2] at the “Address” column on the Web browser. [Note] Make sure that the proxy setting of your web browser is set “Not use a proxy server”. See further information on page 64.
78 Appendix How can I install several projectors equipped with the PJ-Net Organizer? Install and configure network one by one to avoid the IP address collision each other. (p.24) To configure the IP address please see chapter “Network configuration” on page 15.
79 PJ-Net Organizer OWNER’S MANUAL Appendix ENGLISH Can I register the setting page as a web browser “Favorites” or “Bookmarks”? Please add the “Login” page to your “Favorites” or “Bookmarks”. Do not add the specified setting page because it will not be able to perform the password authentication correctly.
80 Appendix Why can't I change the controls in the setting page with web browser? Please make sure the projector is turned on. If it is in the standby mode, the setting is not effective to the projector. To control the projector with a web browser, the projector must be in the powered-on condition.
81 PJ-Net Organizer OWNER’S MANUAL Appendix ENGLISH Why am I not receiving E-mail alert messages? Make sure that the registered E-mail address and SMTP server address are cor- rect. If the SMTP server is located in your LAN (Local Area network), the address should be set to the SMTP server in your LAN.
82 Appendix What are the rules for IP address assignment? If the network is constructed with TCP/IP protocol, a unique IP address is required for each piece of network equipment. The following are basic rules of the assignment. Rule1 Do not configure the same IP address to the network equipment in the same network group.
83 PJ-Net Organizer OWNER’S MANUAL Appendix ENGLISH.
PJ-Net Organizer Owner’s Manual Rev.A.
Ein wichtiger Punkt beim Kauf des Geräts Sanyo POA-PN01A (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sanyo POA-PN01A noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sanyo POA-PN01A - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sanyo POA-PN01A reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sanyo POA-PN01A erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sanyo POA-PN01A besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sanyo POA-PN01A verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sanyo POA-PN01A. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sanyo POA-PN01A gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
