Benutzeranleitung / Produktwartung 1616 des Produzenten Avaya
Zur Seite of 50
A vaya 1616/1616-I IP Deskphone User Guide 16-601448 Issue 2 February 2010.
© 2009 Avaya Inc. All Rights Reserved. Notice While reasonable efforts were made to ensure that the information in this document was complete and accurate at the time of printing, Avaya Inc. can assume no liability for any errors. Changes and corrections to the information in this document might be incorporated in future releases.
Contents Chapter 1: Introduction to the 1616/1616-I IP T elephone ...................................................... 5 Overview of phone buttons and features .........................................................................................
Adding a new contact ...................................................................................................................................... 29 Editing a contact...........................................................................
Chapter 1: Introduction to the 1616/1616-I IP T elephone The 1616/1616-I telephone is a multiline IP telephone for use with Avaya Communication Manager or Avaya Distributed Of fice call processing systems.
Name Description Message W aiting Indicator An illuminated red light in the upper-right corner of your phone indicates you have voicemail messages waiting. If Visual Alerting is enabled, this light flashes when you receive an incoming call. Phone Display There are four lines in the phone display .
Name Description Hold Press the Hold button to put the active call on hold. Conference Press the Conference button to add another party to an existing call. T ransfer Press the T ransfer button to transfer a call to another number . Drop Press the Drop button to drop the active call.
LEDs Each call/line appearance button and feature button has two LEDs, one green and one red, to indicate the status of the call/line appearance or feature. The status is identified by whether the LED is on, off, or blinking as described in the following tables.
Icons in the telephone display Icons are provided in the phone display to indicate the state of a call and navigation choices. The icons that appear in the phone display are described in the following table. Icon Description # X Number of calls missed, where # represents the number .
Paper labels Next to each call/line appearance button and feature button is a paper label. The label identifies the call/line appearance number or the feature that has been programmed on the button by your system administrator . Y ou can remove the labels if you want to change a label or write on a blank one.
Chapter 2: Logging in to and out of your telephone Logging in and out maintains your contacts and personal options if you share a telephone with other users, or if you want to use the same extension from another phone. Logging out also prevents unauthorized use of your telephone during an absence.
Logging in to and out of your telephone 12 Avaya 1616/1616-I IP Deskphone User Guide February 2010.
Chapter 3: Making calls Use the procedures in this chapter to make calls from your telephone. Making a call If you are not on a call, simply dial the number you want to call. 1. Lift the handset, press the Speaker button, press the Headset button, or press an available call/line appearance button.
Calling a person from the contacts list 1. Press the Contacts button. 2. Scroll up or down to select the person or number you want to call. 3. Press the OK button or the Call softkey . Calling a person from the call log 1. Press the Call Log button. 2.
Chapter 4: Handling calls Use the procedures in this chapter to handle calls from your telephone. This includes procedures such as answering a call, muting a call, and transferring a call. Answering a call When you receive an incoming call, the green LED associated with the call will flash.
Sending an incoming call directly to voice mail Press the T o Vmail softkey to send an incoming call directly to voice mail without answering. T o do this, your voice mail must be administered as the first entry in your coverage path. See your system administrator for more information.
The fast blinking green LED next to the call/line appearance button indicates the call is on hold. If the active call is on a line appearance on an Avaya Distributed Office system, the red LED will also be on. 2. T o resume the call when there is more than one call on hold, do one of the following: • Press the call/line appearance button.
Handling calls 18 Avaya 1616/1616-I IP Deskphone User Guide February 2010.
Chapter 5: Conference calls Y ou can use conference calls to speak with up to five people in dif ferent locations on the same call. Additional conferencing options may be available through Expanded Meet-Me Conferencing. Contact your system administrator for more information about this feature.
• Press the call/line appearance button for the call on hold. Be sure not to choose the call/line appearance button for the call that is on soft hold. • Scroll to the call on hold, and press the Resume softkey . 4. Press the Join softkey or the Conference button to add the person to the conference call.
Dropping a person from a conference call 1. From the Phone screen, select the Details softkey (if available) during a conference call. 2. Scroll to the person you want to drop. 3. Press the Drop button. Silencing a person on a conference call Only people calling from external numbers can be silenced on a conference call.
Conference calls 22 Avaya 1616/1616-I IP Deskphone User Guide February 2010.
Chapter 6: Getting your messages Use the Message button to connect to your voice mail system. When you have messages waiting, the red light on the upper right-hand corner of your telephone is illuminated. Y our messages are an administered function. Contact your system administrator with any questions.
Getting your messages 24 Avaya 1616/1616-I IP Deskphone User Guide February 2010.
Chapter 7: Bridged call appearances Y our phone may show one or more bridged call appearances on the display screen in addition to your own call appearances.
Making an outgoing call on a bridged call appearance When you make a call on a bridged call appearance, you are using another person’s call appearance. The caller ID may show the call as coming from you or coming from the person whose call appearance you are using.
Chapter 8: Shared line appearances If your call processing system is an Avaya Distributed Of fice system and depending on how it is configured, your phone may show shared line appearances on the display screen in addition to your own lines. A shared line appearance is a line that is shared among multiple users.
Making an outgoing call on a shared line appearance If you have any questions about how the name or extension displays to the person you are calling when you make a call on a shared line appearance, contact your system administrator . Y ou can make only outside calls on shared line appearances.
Chapter 9: Contacts Y ou can save up to 100 names and telephone numbers. For additional information, see Calling a person from the contacts list on page 14. V iewing contacts details 1. Press the Contacts button. 2. Scroll to the contact you want to view .
d. Enter remaining letters or numbers. e. Press Bksp to delete the last character . Note: If you want to remove a letter , number , space, or symbol that is in the middle of the text you entered, use the left and right navigation arrows to place your cursor after the character you want to remove.
If you press the Cancel softkey prior to pressing the Delete softkey , your contact information will not be removed. Deleting a contact Avaya 1616/1616-I IP Deskphone User Guide February 2010 31.
Contacts 32 Avaya 1616/1616-I IP Deskphone User Guide February 2010.
Chapter 10: Call log Y ou can use the call log to view a list of your recent calls or view separate lists of your outgoing, answered, or missed calls. See T urning call logging on or of f on page 35 for information about logging bridged call appearances, line call appearances, and line calls that are answered by others.
Adding an entry from the call log to your contacts list 1. Press the Call Log button. 2. Scroll to the number you want to add to your contacts list. 3. Press the Details softkey . 4. Press the +Contact softkey . If your contacts list is full, the +Contact softkey is not displayed.
3. Press More > DelAll to delete all of the entries in the list you are viewing. 4. Press the DelAll softkey again to confirm. T urning call logging on or off Y ou can turn call logging on or of f.
Call log 36 Avaya 1616/1616-I IP Deskphone User Guide February 2010.
Chapter 1 1: Advanced telephone features Avaya call management systems provide many advanced telephone features such as Directory , Call Forwarding, and Abbreviated Dial buttons. These features are administered on the feature buttons on your telephone.
Send all calls The Send All Calls (SAC) feature allows you to send all of your incoming calls directly to a predefined coverage number , typically your voice mail. Incoming calls ring once at your extension and then go directly to a number which is set by your system administrator .
you are away from your desk. The cell phone number is programmed by your system administrator . If you use a Feature Access Code to enable EC500, the forwarding icon does not appear in the phone display . 1. Press the EC500 feature button to turn the feature on.
Advanced telephone features 40 Avaya 1616/1616-I IP Deskphone User Guide February 2010.
Chapter 12: Features menu The Features menu provides access to the same advanced telephone features, such as Directory and Call Forwarding, that are programmed on your feature buttons.
Features menu 42 Avaya 1616/1616-I IP Deskphone User Guide February 2010.
Chapter 13: A vaya Menu Y ou can use the A vaya Menu to adjust and customize phone settings, configure call logging, select the display language, view network settings, and log out.
5. Press the Select softkey or the OK button. 6. Scroll to the right or left to adjust the brightness or contrast. Changing the ring pattern 1. Press the A button. 2. Select Screen/Sound Options. 3. Press the Select softkey or the OK button. 4. Select Personalized Ringing.
T urning error tones on or off 1. Press the A button. 2. Select Screen/Sound Options. 3. Press the Select softkey or the OK button. 4. Select Error T ones. 5. Press the On or Off softkeys, the OK button, or the right or left navigation arrow to turn error tones on or off.
3. Press the Select softkey or the OK button. 4. Select Visual Alerting. 5. Press the On or Off softkeys, the OK button, or the right or left navigation arrow to turn visual alerting on or off. Setting redial options Y ou can set Redial to dial the last number you dialed or to display a list of the last numbers you dialed.
T urning show incoming call on or off Y ou can set your call settings to automatically display incoming calls. Y ou can turn the Show Incoming Call option on or off. 1. Press the A button. 2. Scroll to Call Settings. 3. Press the Select softkey or the OK button.
Changing the language 1. Press the A button. 2. Scroll to Advanced Options. 3. Press the Select softkey or the OK button. 4. Select Language . 5. Press the Select softkey or the OK button. 6. Scroll up or down to select a display language. Note: Other languages may be available.
Index A advanced options setting automatic gain control .............................. 47 Advanced Options changing language ............................................... 48 advanced telephone features about .........................................
Features accessing ............................................................. 41 Features menu about .................................................................... 41 forwarding a call .........................................................
Ein wichtiger Punkt beim Kauf des Geräts Avaya 1616 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Avaya 1616 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Avaya 1616 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Avaya 1616 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Avaya 1616 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Avaya 1616 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Avaya 1616 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Avaya 1616. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Avaya 1616 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
