Benutzeranleitung / Produktwartung DMP-M700 des Produzenten Sanyo
Zur Seite of 23
-1- Digital Memory Player DMP-M600 DMP-M700 V ersion 1.01 Instruction Manual.
-2- Accessories USB cable Headphones Strap Contents Accessories ..................................................................................................................................................................... 2 Precautions .......
-3- - The apparatus shall not be exposed to dripping or splashing. - Do not drop the player or subject it to strong shocks. - Do not use where there are extremes of temperature (below 5 ° C or exceeding 35 ° C). - IBM and PC/AT are registered trademarks of International Business Machines Corporation.
-4- Controls 1. Built-in microphone 2. Necklace connection hole 3. Headphones socket ( ) 4. Power, Play/Stop, Skip/Search, Select/Set button ( f , a , e POWER) 5. Volume buttons (+ VOL –) I/O 4 3 2 1 5 6 7 10 9 8 6. Mode/Menu button (MODE) 7. Reset switch (RESET) 8.
-5- Selecting the action Windows is to take (Windows XP only) After connection, the following screen will appear. Example: Adjust your settings to match your PC ’ s environment. In this manual, [Take no action] is selected, [Always do the selected action] is checked, and [OK] is clicked.
-6- How to install the MusicFileMaster software - Reproduction of this software is forbidden. - This software shall not be copied and reprinted. - SANYO shall not be liable for any damages arising out of the use of this software. - The screen shots are of Windows XP.
-7- Installing the MusicFileMaster software 1. In the step 2 on the previous page, click [Removable Disk (F:)] > [MusicFileMaster] folder. 2. Double click [Setup.exe] in [MusicFileMaster] folder. [InstallShield Wizard] screen appears. Click [Next].
-8- Disconnecting the player from your PC Before disconnecting, make sure no data is being transferred. For Windows 98SE: Disconnect the player from your PC. For Windows XP/2000/Me: 1. Right-click the Task tray icon at the bottom right of the Windows screen.
-9- An icon [Removable Disk] will appear in My Computer in Windows when the player is connected to your PC. [MUSIC] folder Files transferred from your PC are stored in this folder. - There is no set format for file names for files which are transferred, but they must be MP3 or WMA files.
-10- MusicFileMaster You can select music files on your hard disk and manage them using MusicFileMaster, by reading them into the application. MusicFileMaster enables you to transfer music files to your portable device, and manage the transferred music files.
-11- T ransferring data by MusicFileMaster Start up the MusicFileMaster (refer to page 10). Transferring data to the player After selecting [Help] menu > [Table of Contents], click [Basic operations] > [Transferring music files to portable device] of the [Portable device].
-12- T ransferring data using the Media Player If you have the Microsoft Windows Media Player installed, you can transfer WMA files to the player and listen to them. See the Windows Media Player on-line help for details on how to do this. Note: - Never disconnect the player from your PC during transfer.
-13- Selecting the function 1. In the stop mode, press [MODE] (for at least 2 seconds). The first stage menu appears. 2. Press [ a ], then move [ a ] right ( e ) or left ( f ) to select the desired function ( “ ” , “ ” or “ ” ) and press [ a ] again.
-14- Play music First, select “Music” function (refer to the previous page). 1. In the stop mode, press [MODE] (for at least 2 seconds). The first stage menu appears. 2. Move [ a ] right or left to select “ Music Setting ” . 3. Press [ a ]. “ SOUND EQ ” appears.
-15- ALL RANDOM ONE MUSIC Selecting the repeat/random playback Only for files in the MUSIC (or FM) folder: 1. In the stop mode, press [MODE] (for at least 2 seconds). The first stage menu appears. 2. Move [ a ] right or left to select “ Music Setting ” .
-16- (Valid only for music files transferred by MusicFileMaster.) ALL : Selects all the music files. ARTIST : Selects the music files by artist name. ALBUM : Selects the music files by album name. GENRE : Selects the music files by genre name. PLAYLIST : Plays the music files in the playlist.
-17- Recording voice First, select “Voice” function (refer to page 13). Recording time The recording time differs as shown below. (When [MusicFileMaster] and [Manual] folders are deleted) Recording mode Recording time (approx.) DMP-M600 HQ: High-quality 8 hr.
-18- Listening to the FM radio Important note: When listening to the radio, you must connect the headphones. The headphones serve as an FM aerial. First, select “FM” function (refer to page 13). - If a radio frequency is not displayed; press [ a ], then move [ a ] right or left to select “ LISTEN FM ” and press [ a ].
-19- Erasing Erasing a file First, select the function (Music, FM or Voice) which has the file to be erased. 1. In the stop mode, press [MODE] (for at least 2 seconds). The first stage menu appears. 2. Move [ a ] right or left to select “ CommonSetting ” .
-20- Menu setting Common procedures of menu setting 1. In the stop mode, press [MODE] (for at least 2 seconds). The first stage menu appears. 2. Move [ a ] right or left to select the first stage menu, then press [ a ] to confirm the menu.
-21- Function Selecting the function : Music function : FM function : Voice function Music Setting SOUND EQ: Setting up the sound equalizer POP: Pop ROCK: Rock JAZZ: Jazz NOR: Normal (Deactivates the .
-22- T roubleshooting guide WHAT TO DO IF... If the operation of the player or display is not normal, 1. Press [RESET] using a clip, etc. 2. Resume operation. This operation should not be performed under ordinary circumstances. I/O Symptom Possible cause Corrective action The player does not start.
-23- Cleaning the cabinet Clean the outside of the player with a clean soft cloth, moistened with lukewarm water. Do not use benzene, thinner or alcohol since they will mar the finish of the surfaces.
Ein wichtiger Punkt beim Kauf des Geräts Sanyo DMP-M700 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sanyo DMP-M700 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sanyo DMP-M700 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sanyo DMP-M700 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sanyo DMP-M700 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sanyo DMP-M700 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sanyo DMP-M700 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sanyo DMP-M700. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sanyo DMP-M700 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
