Benutzeranleitung / Produktwartung CCA-BC200 des Produzenten Sanyo
Zur Seite of 24
INSTR UCTION MANU AL CCA-BC200 Rear V i ew Bac k up Camera System SANY O’S HELP-LINE Call the toll-free number below if you ha ve any dif ficulti es operating this product. 1-800-421-5013 (Weekda ys 7: 30 AM – 5:00 PM, P acific Time) • Installation and wiring require technical e xpertise and experience.
- 1 -.
− 2 − CONTENTS SAFETY PRECAU TIONS ················································································.
− 3 − • When installing this Rear View Back up Camera System to a vehicle equipped with air bags (The name differs depending on the manufacture r, such as SRS du al air bag, SRS side air bag, SRS curtain air bag), do not install this Rear Vi ew Back up Came ra System or route i ts wiring where it affects operation of the air bag syst em.
− 4 − • Route wiring properly according to the instructio ns. An incorrect connection might cause a fire or accident. • Be careful and prev ent the wiring harness from b eing pinched between the vehicle body , screws, or moving part s such as the seat rails.
− 5 − BEFORE USING THE REAR VIEW B A CK UP CAMERA SYSTEM Regarding methods of use • The Rear View Back up Camera Syste m is a devi se de signed only to assist the driver. The driver must take full precautions to confirm the safety and conditions around the vehicle.
− 6 − A CCESSORIES AND HARD W ARE Make sure all the f ollowing par ts are included in the Rear Vie w Ba ck up Camera System kit. 1 Rear view camer a………1 pc. (with appro x. 2 6.2 ft. lo ng cable) P ower supply cable ……1 pc. (approx . 4.92 ft.
− 7 − REAR VIEW BACK UP CAMERA SYSTEM OUTLINE Displa y mode Including the standard rear view image captured b y the camera, a digitally corrected rear view, view-from-top, and stand ard rear view can be selected. Guide lines are indicated in order to assist the driver and assure safet y when backing up.
− 8 − CA UTIONS FOR CONNECTION • Before connecting, disconnect the negativ e battery terminal. Connect the negativ e battery terminal after all other connections are compl eted. • Connection terminals and cables are d ifferent iated by color. Make connections to the same colors.
− 9 − CONNECTION • Installation and wir ing require technic al e x per tise and experience. T o ensure proper installation and safety , consult the dealer where the product was purchased. CA UTION • A lways use the same type of fuse with the same current rating when rep lacing it.
− 10 − BEFORE INST ALLA TION Rear V iew Bac k up Camera System Installation Cautions • Bundle cables with tape or string so that t hey do not obstruct drivin g. Cables that become entangled in the steering wheel, shift selecto r le ver or br a ke pedal could cause an accident.
− 11 − Determination of Camera Inst allation P osition (example) • T emporarily adhering the camera with the tape, locate a suitable installation position b y adjusting the camera angle so that the rear of the vehicle (bumper and other areas) is visible in the monitor .
− 12 − INST ALLA TION Installing system on rear spoiler 1. Clean the location where the camera is to be installed. Wipe off oil, wax, moisture , dir t an d dust using a cleaner and a clean cloth. 2. P eel off the paper backing from the tape on the camera brack et and fir mly attach the bracket to a flat surf a ce on the rear spoiler .
− 13 − 4. Adjust the camera angle so that the extreme rear end of the vehicle (bumper , rear window , and liftgate.) is displa yed at the bottom of the monitor . • After adjusting the angle, tighten the screws with them seated at the lower end of the oblong holes in the brac ket on each side.
− 14 − 7. Install the control switch in a position where it is easy to operate. P eel off the paper backing on the back of the control s witch and attach it to a suitable position. How to use self-loc k conductor 1. Inser t the rev e rse signal cable of the v ehicle into the self-lock conductor .
− 15 − CABLE R OUTING The follo wing is an example when installing the camera on the rear spoiler . 1. Route the camera cable along the top of the liftgate and secure the cable with the cable clamps included with the Rear View Bac k up Came ra System.
− 16 − 3. Route the camera cable to the ECU box positioned inside the vehicle and clamp it using the cab le clamps. Inser t the cable into the slit provided in the waterproof pad and attach the water proof pad to the weather strip on the vehicle at the point where the cable enters the vehicle .
− 17 − GUIDE LINE ADJUSTMENT AFTER REAR VIEW CAMERA INST ALLA TION The guide lines on the screen need to be aligned wi th the image taken from the rear view camera (and other reference items) so that the system is corre ctly matched to the vehicle.
− 18 − Alignment Mode T urn the ignition s witch to the ACC ON position while depressing the control switch. • Press and hold the control switch until the screen appears. View-from-top alignment screen appears. (Sev en rectangles at top left indicate sev en items to align.
− 19 − 1. View-from-top angle alignment (flashing white rectangle) 1-1. Each time the control switch is pressed, the angle increases. Continuously pressing the control s witch ret urns the alignme nt to the original angle. Set the parking space lines parallel to the lines on the screen.
− 20 − 3. View-from-top height alignment (flashing violet rectangle) 3-1. Press the control switch to change to a higher or lower view-from-top . Select a view-from-top height so t hat the markers indicating the width of the vehicle can be seen better on the screen.
− 21 − 5. Right guide line alignment (flashing green rectangle) 5-1. Each time the control switch is pressed, the right guide line moves tow ards the center . Continuously pressing the control switch mov es the guide line to its maximum right position.
− 22 − 7. 1.5 ft. guide line alignment (flashing blue rectangle) 7-1. Each time the control switch is pressed, the 1.5 ft. guide line mov es far ther from the vehicle . Continuously p ressing the control s witch mov e s the line farther awa y until it ex ceed s a cer tain range and the line returns to the position closest to the vehicle.
− 23 − REAR VIEW B A CK UP CAMERA DISPLA Y AND SWITCHING DISPLA Y MODES Preparation prior to use Make sure the ignition s witch is in the ON or ACC position. 1. T urn the monitor on and select the input mode s witch to view the image from the rear view camera on the screen.
Ein wichtiger Punkt beim Kauf des Geräts Sanyo CCA-BC200 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sanyo CCA-BC200 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sanyo CCA-BC200 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sanyo CCA-BC200 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sanyo CCA-BC200 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sanyo CCA-BC200 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sanyo CCA-BC200 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sanyo CCA-BC200. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sanyo CCA-BC200 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
