Benutzeranleitung / Produktwartung V6700 des Produzenten Samsung
Zur Seite of 53
DVD-V6700 www .samsung.com.au User ’ s Manual 6700_XSA_Eng1(01) 2/14/07 7:54 PM Page 1.
2 - English The lightning bolt is a warning sign alerting you to dangerous voltage inside the product. DO NOT OPEN THE DVD-VCR. Refer to service personnel. DO NOT expose the DVD-VCR to extreme temperature conditions (below 5°C and above 40°C) or to extreme humidity conditions (less than 10% and more than 75%).
English - 3 Disc T ype and Characteristics Disc Markings • CD is recorded as a Digital Signal with better audio quality , less distor- tion and less deterioration of audio quality over time. • Video with CD sound, VHS quality & MPEG-1 compression technology .
4 - English Getting Started Getting Started Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Disc T ype and Characteristics . . . . . . . . . . . . . . . . . . . . . . .3 Overviews . . . . . . . . . . . . . . . . . .
English - 5 Overviews Front View of the DVD-VCR (DVD-V6700) 1. DVD DECK. 2. OPEN/CLOSE BUTTON. 3. VIDEO CASSETE COMP ARTMENT . 4. EJECT BUTTON. 5. ST ANDBY/ON BUTTON. 6. VIDEO INPUT JACK LINE IN 2. 7. AUDIO L/R INPUT JACK LINE IN 2. 8. PROGRESSIVE SCAN MODE BUTTON.
6 - English 1. The DVD Deck is active. 2. Disc is loaded. 3. The time, counter position, current deck status is displayed. 4. Video tape is inserted. 5.
English - 7 Make sure that the following basic accessories are supplied with your DVD-VCR. Y ou must insert or replace the batteries in the remote control when you: • Purchase the DVD-VCR • Find t.
8 - English 1. DVD,VCR Used to operate DVD, VCR. 2. ST ANDBY/ON Used to turn the power on or off. 3. Number buttons 4. TIMER Used to activate the timer recording of a programme. 5. REC ( ● ) Used to make a recording on cassette. 6. SKIP ( / ) Use to skip a title, chapter or track.
English - 9 T o receive television programmes a signal must be received from one of the following sources: • An outdoor aerial • An indoor aerial • A cable television network • A satellite receiver 1 Remove the aerial or network input cable from the television.
10 - English 3 2 4 1 COMPONENT VIDEO IN COMPONENT INPUT 1 2 COMPONENT VIDEO OUT Connecting DVD-VCR to the TV using the S-Video Cable Connecting DVD-VCR to the TV using the Component Video Cable Y our TV must support progressive scan input to allow you to watch component video output.
English - 11 T o take full advantage of the movie theater experience that DVD offers, you may want to connect your DVD-VCR to a complete Surround Sound system, including an A/V Receiver and six Surround Sound speakers.
12 - English This allows you to connect your DVD -VCR to other external devices and view or record their outputs. • Method 1 : Connecting a VCR, Set-T op Box(STB) or DVD-VCR to the AUDIO/VIDEO LINE IN 1 jacks. • Method 2 : Connecting a Camcorder to the LINE IN 2 in jacks.
English - 13 6 Check the date and time. Refer to “Setting the Date and T ime” to change the date and time. (see page: 14) Plug & Auto Setup Y our DVD-VCR will automatically set itself up when it is plugged into the mains for the first time. TV stations will be stored in memory .
14 - English T uning Y our T elevision for the DVD- VCR Y ou must tune your television for the DVD-VCR only if you are using the RF cable. T o view pictures from your DVD-VCR when a Scart cable is used, the television must be set to the audio/video mode (A V).
English - 15 Setting the Menu Language 1 Press the MENU button, then press the OK or button. 2 Press the OK or button again. The Language Set menu is displayed. 3 Press the or button to select desired language, then press the OK or button.
16 - English Y ou do not need to preset the stations manually if you have already set them automatically . 1 Press the MENU button, then press the OK or button. 2 Press the or button to select Install , then press the OK or button. The Install menu is displayed.
English - 17 5 Press the button to preset the station. The MANUAL TUNING menu will be dis- played. Press the ¥ or button to start scanning the channels. The frequency band is scanned and the first station found is displayed. 6 If necessary , press the or button to select MFT , then press the ¥ or button to adjust the picture.
18 - English . 4 Press the or button to select required preset TV station. The selected station is dis- played at the same time on the television screen. 5 Press the OK button to change the programme number assigned to a station. 6 Press the or button to select required position, then press the OK button to swap the position.
English - 19 2 Press the or button to select Install , then press the OK or button. The Install menu is displayed. 3 Press the or button to select VCR Output CH . Autralia Model New Zealand Model 4 Press the OK or ¥ or button to select the required output channel .
20 - English NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound. Please refer to page 28.
English - 21 Auto Power Off This feature automatically turns off your DVD- VCR if no signal is received and you do not press any button for the selected time. 1 Press the MENU button, press the OK or button. 2 Press the or button to select Auto Power Off .
22 - English Y ou can set repeat play to repeat the tape continously from beginning to end. 1 Press the MENU button, then press the or button to select VCR . 2 Press the OK or button, then press the or button to select Repeat Play .
English - 23 Selecting the Recording Speed Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape. 1 If you wish to protect a cassette, break off the tab using a small screwdriver .
24 - English Recording from Another VCR or Camcorder Y ou can copy a cassette to your DVD-VCR from another video source, such as another VCR or a Camcorder etc. • It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them in any form without the permission of the owners of the corresponding copyright.
English - 25 Using the Assemble Edit Function This function allows you to start a new recording at a specific position on the cassette while main- taining a very smooth scene change. 1 Insert the cassette to be edited in your DVD-VCR. 2 Press the ll button to start playback.
26 - English 9 Press the MENU button to exit the menu. 10 Press the ST ANDBY/ON button to activate the timer . Before starting recording, the DVD-VCR compares the timer duration with the remaining time on the cassette.
English - 27 Cancelling a Preset Recording Y ou can cancel any programmes that are: • Incorrect • No longer required 1 Press the MENU button, then press the or button to select PROG . The Timer Method menu is displayed. 2 Press the OK or button.
28 - English Playing a Sequence Frame by Frame Y ou can vary the playback speed using the Shuttle function (up to nine times the normal speed). Example: Y ou wish to analyse a sports person’s technique, movement by movement. • No sound is heard when playing a sequence at variable speeds.
English - 29 Searching for a Specific Sequence Each time you record a cassette on this DVD- VCR, an “index” is automatically marked on the tape when recording starts. The Search function allows you to fast-forward or rewind to a specific index and start playback from that point.
30 - English The tape counter: • Indicates the elapsed time in the play and record modes (Hours, Minutes and Seconds). • Is reset when a cassette is inserted in the DVD-VCR. • Allows you to find the beginning of a sequence easily . • If the remaining time is to be calculated correctly , you must indicate the type of cassette being used.
English - 31 Setting Up the Language Features D D VD VD F F unctions unctions If you set disc menu, audio and subtitle lan- guage in advance, it will come up automatically every time you watch a movie. Using the Disc Menu Language 1 Press the MENU button in the stop mode.
32 - English Setting Up the Audio Options Dolby Digital Out • PCM : Converts to PCM (2CH) audio. Select PCM when using the Analog Audio Outputs. • Bitstream : Converts to Dolby Digital Bitstream (5.1CH).Select Bitstream when using the Digital Audio Output.
English - 33 DTS • Off : Doesn’t output digital signal. • On : Outputs DTS Bitstream via digital output only . Select DTS when connecting to a DTS Decoder Dynamic Compression • On : T o select dynamic compression. • Off : T o select the standard range.
34 - English The Parental Control function works in conjunc- tion with DVDs that have been assigned a rating which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. 1 Press the MENU button in the stop mode.
English - 35 6 Press the or button to select the required level (e.g. Level 6 ). Press the OK or button. • Discs that contain Level 7 will now not play .
36 - English Please read the below information before update procedure. 1 The following events may interrupt the update procedure and may result in permanent damage to DVD-VCR. • Unplugging the power cord. • Power outage. • Dirt or Scratch in the discs.
English - 37 Special Playback Features During DVD/VCD/CD playback you can select from the following special playback options. T o resume normal playback, press the ll but- ton. Still Press the ll button during playback. • The picture will still and the audio will mute.
38 - English 3 Press the ¦ or button to make the desired setup, then press the OK button. • Y ou may use the number buttons of the remote control to directly access a title, chapter or to start the playback from the desired time. 4 T o make the screen disappear , press the INFO button again.
English - 39 Adjusting the Aspect Ratio (EZ View) This function may be different depending on the type of disc. T o play using aspect ratio (DVD) 1 Press the EZ VIEW button. • The screen size changes when the button is pressed repeatedly . • The screen zoom mode operates dif ferently depending on the screen setting in the initial DVD menu.
40 - English If you are using a 4:3 TV For 16:9 aspect ratio discs - 4:3 Letter Box Displays the content of the DVD title in 16:9 aspect ratio. The black bars will appear at the top and bottom of the screen. - 4:3 Pan Scan The left and right portions of the screen are cut off an the central portion of the 16:9 screen is displayed.
English - 41 Zoom 1 During playback, press the MENU button. Press the or button to select FUNC , then press the OK or button. The Function menu is displayed. Function DVD Function VCR Function OK RETURN MENU SETUP DVD VCR PROG FUNC 2 Press the button, then press the or button to select ZOOM.
42 - English Repeat Chapter/Title Y ou can repeat a single chapter or a complete title . 1 Press the REPEA T button while in playback mode to open the repeat menu. The current repeat mode is displayed . 2 Press the ¦ or button to select Chapter/Title .
English - 43 MP3/WMA Play If you insert an MP3/WMA Disc into the DVD-VCR, you can see the folder directory . MP3/WMA Play Function 1 Press the or button to select the desired music folder , then press the OK button. • Up to 7 music folders can be displayed at a time.
44 - English CD-R MP3/WMA discs When playing CD-R/MP3 or WMA discs, please follow all the recommendations for CD-R above, plus the comments below: Y our MP3 or WMA files should be ISO 9660 or JOLIET format. ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows, and with Apple's Mac.
English - 45 If you insert a Picture (JPEG) CD Disc into the DVD-VCR, you can see the folder directory . 1 Press the or button to select the picture you want to view , then press the OK button. The selected picture is displayed. 2 Press the l ¦¦ or l button to display the previous or next picture.
46 - English Slide show Press the ¦ or button to select . Press the OK button. The 3 icons are displayed for time interval. Press the ¦ or button to select one of these. Press the OK button. The pictures change automatically with about an 6 second interval.
English - 47 DivX/MPEG4 Playback 1 When the disc is inserted, the file structure of the disc will be shown. Depending on the file format, a different icon will appear next to each file. The and files will have been highlighted. Use or button to select the movie file, and then press OK or ll .
48 - English 6 Zoom During play , press the MENU button on the remote control. Then press the or button to select the FUNC , then press the OK or button. The Function menu is displayed. • Press the or button to select DVD Function .
English - 49 T echnical Specifications Rated voltage AC 220 - 240V , 50Hz Power consumption 19W atts Weight 3.9 Kg General Size 430mm X 282mm X 82mm Operating ambient temperature +5°C ~ +40°C Installation conditions Operation position : Horizontal, Relative humidity : Below 75% Video input (Rear) RCA jack : 1.
50 - English T roubleshooting Guide (VCR) Before contacting the Samsung after-sales service, perform the following simple checks. If you are unable to solve the problem after reading the below instructions, note: • The model and serial number on the rear of your DVD-VCR.
English - 51 T roubleshooting Guide (DVD) The icon appears on screen. Disc does not play . 5.1 channel sound is not being reproduced. Playback mode differs from the Setup menu selection. The screen ratio cannot be changed. No audio. Forgot password. If you experience other problems.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Region Country Customer Car e Center W eb Site North America CANADA 1-800-SAMSUNG (7267864) www.samsung.c om/ca MEXICO 01-800-SAMSUNG (7267864) www.
AK68-01289A(01) Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Ein wichtiger Punkt beim Kauf des Geräts Samsung V6700 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Samsung V6700 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Samsung V6700 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Samsung V6700 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Samsung V6700 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Samsung V6700 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Samsung V6700 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Samsung V6700. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Samsung V6700 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
