Benutzeranleitung / Produktwartung SVR-950E des Produzenten Samsung
Zur Seite of 116
Premium Security Digital V ideo Recor der SVR-1650E/1640A/950E User’s Manual Thank you for purchasing a Samsung Digital Video Recorder. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
.
1 I I n n t t r r o o d d u u c c t t i i o o n n Thank you for purc hasing the SVR-1650E/1640A/950E. This is a user manual for SVR-1650E/1640A/950E. Be fore product installation and operation, please become thoroughly familiar with this user manual and other manuals refere nced b y this manual.
2 T able of Contents Introduction ............................................................ 1 Product warranty and limits of responsibility ........................................... 1 Chapter1. Safety Cautions ....................................
SVR-1650E/1640A/950EUser Manua l 3 4.5.1 Time search .......................................................................... 38 4.5.2 Even t search ......................................................................... 40 4.5.3 Log search ......
4 5.8.3 R elay ................................................................................... 84 5.8.4 TEXT ................................................................................. 84 5.8.5 EVENT -PRESET .................................
5 C C h h a a p p t t e e r r 1 1 . . S S a a f f e e t t y y C C a a u u t t i i o o n n s s Symbols displayed for each item Refers to information u sers need to know in order to prev ent seriou s injury or death.
6 9 Do not apply excessi v e force when pulling on th e po wer co rd. Damaging the cord may cause an electric shoc k or fire . 9 Random replacement of built-in batter y by ot her types of batteries ma y cause explosion. 9 The batter y shall be re plac ed by the s ame battery .
SVR-1650E/1640A/950EUser Manua l 7 1 Corr ect Disposal of This Pr oduct (W aste Electrical & Electronic Equipment) (Applicable in the European Union and other European countri es with separate col.
8 C C h h a a p p t t e e r r 2 2 . . S S u u m m m m a a r r y y 2.1 Featur es Monitoring Screen Vivid li ve video with high im age quality is realized and v arious obser vation screens are pro vided for each channe l.
SVR-1650E/1640A/950E User Manual 9 2 Video recor ding High image quality MPEG4 video recording is po ssible . Up to 480 frames(SVR-1650E)/120 frames(SVR- 1640A/950E) per second of recorded vi deo can be stored and p re-event recording can b e done for up to 5 seconds before an event o ccurs .
10 Storage device A built-in hard disk dri ve is pr ovided. User may also sele ct to use D VD ± RW , C D - RW a n d U S B m e m o r y fo r backup . Standard storage: Built-in hard disk drive .
SVR-1650E/1640A/950E User Manual 11 2 2.2 Components D VR package contains the mai n body and the follo wing accessories . Please verify whether all accessories are included at the time of purchase . If any access ory is missing, inquire at the point of purchase.
12 Backup(Copy) section Category Function 1. D VD-Multi : D VR for backup Used to back up recorded /stored images on D VD/CD media. Jog/shuttle section Category Function 2. JOG/SHUTTL E Menu setup v alues can be adju sted and STEP function can b e controlled with JO G .
SVR-1650E/1640A/950E User Manual 13 2 Function button section Category Function 11. ▲ Used for mov ement in the upper direction. 12. ▼ Used for mov ement in the low er direction. 13. ◀ Used for mov ement to the left MENU 14. ▶ Used for mov ement to the right 15.
14 2.3.2 Back connector terminals No. I/O terminal names Function 1 CH1~16 (SVR-950E: CH1~9) BNC input connector terminal for the camera. 2 LOOP OUT BNC output (loop) connector term inal for the camera. 3 RS-232C RS-232C ter minal. 4 MONITOR A2 BNC conn ector ter minal for monitor output.
SVR-1650E/1640A/950E User Manual 15 2 Refer to ‘Chapter 3. Installation method ’ and ‘Chapter 4. Operation method’ for detailed descriptio n about setup and utilization. I f y o u m a k e a c o n n e c t i o n t o A T M / P O S o r H D D E x t e n s i o n U n i t , p l e a s e r e f e r t o the manual.
16 2.4 Product specification Video Items Specification Input method Composite input 16 chann els (SVR-1650E/1640A) / 9 ch annels(SVR-950E) Video input lev el 1.
SVR-1650E/1640A/950E User Manual 17 2 Connector ter minals Items Specification Video input BNC(SVR-1650E/1640A: 16, SVR-950E: 9) Loop output BNC(SVR-1650E /1640A: 16, SVR-950E: 9) Monitor output BNC(2.
18 Hard disk drive Items Specification Max. no . of mounts 4 Basic mount 1 (built-in) Hard disk driv e type EIDE(UL TRA DMA-133) Min. speed 7200rpm R ecommended product Seagate series , Maxtor series , Samsung Electro nics The rec ommended m odels are as follows.
SVR-1650E/1640A/950E User Manual 19 2 Copy Item Specification Digital copy DVD ± RW , DV D ± R , CD-RW , CD-R and External USB memory DVD ± RW, DVD ± R , CD-RW and CD-R media may be use d.
20 Accessories Item Specification Supplied accessories Netw ork viewer pro g ram CD User man ual Quick gui de manual R emote controller Mouse (Not included in SVR-950E) Cable core RJ-45 cable (2 cable.
21 C C h h a a p p t t e e r r 3 3 . . I I n n s s t t a a l l l l a a t t i i o o n n m m e e t t h h o o d d 3.1 Overall connection 3.1.1 Front connection method Connection organization diag ram for D VR front side terminals are as follows .
22 3.1.2 Back con nection method The organization chart for D VR and monitors , CCTV cameras and external devices is as follo ws . If you ma ke a conn ection t o ATM/POS, please refer t o the manu al.
SVR-1650E/1640A/950E User Manual 23 3 3.2 Detailed connection 3.2.1 Rack mount T o mount the product, the enclosed rac k must be mo unted first. Mount se quence is as follo ws . The enclosed rack mount is mounted on the product. The product is mounted on the 19 inch rack.
24 3.2.2 Video/Audio connection 1. Camera Up to 16(SVR-950E: Up to 9) CCTV ca meras can be connected to D VR. Connect the BNC terminal for each camera to the CA MER A IN ter minal in the back of this product. I f BNC te rminal is only con nected to CAMERA IN, a 75 Ω term inating r esistor is setup internally.
SVR-1650E/1640A/950E User Manual 25 3 I m a g e i n p u t f r o m e a c h c a m e r a is output simultaneously to the external device connected to the M ONITOR OUT termin a l in the back of the product.
26 3.2.3 Exter nal connector If you make a connection t o HDD Extension Unit, plea se refer to the manual. M O N IT O R A 2 C H 1 6 C H 1 5 C H 1 4 C H 1 3 C H 12 C H 1 1 C H 1 0 C H 9 C H 8 C H 7 C H.
SVR-1650E/1640A/950E User Manual 27 3 1. Sensor input (SENSOR IN) This is an exter nal sensor connection terminal used to input infor mation from the connected sensors or devices to the product . Sensor input type can be set up in the Ev ent setup screen in t he Main m enu.
28 2. Relay output (RELA Y OUT) This is an alar m output ter minal used to output al arms for sensor, motion detection, video loss and po wer OFF to external devices . For operation of each r elay outpu t, refer t o the main m enu event setup in ‘5.
SVR-1650E/1640A/950E User Manual 29 3 3. Exter nal control equi pment (RS-422/485) This is a ter minal for connecting external control equipment. The switch labeled TERM is used to turn ON/OFF term inating resistance for RS–422/485 comm unication equipment.
30 PORT A : SCC-3100A terminal ※ RS-422/485 connection can be se lected from the SW1 switc h. T o connect RS-485: SW1 switch 1, 2 are turned ON . T o connect RS-422: SW1 switch 1, 2 are turned OFF D.
SVR-1650E/1640A/950E User Manual 31 3 PORT B : SPD-2200 terminal Speed dome terminal DVR POR T B D + 9 or 16 D - 10 or 15 GND 13 ※ If GND is connected, a much sharper image quality can be seen. T E R M 2 s w i t c h 1 , 2 m u s t b e s e t t o O N .
32 SPD-2500 ter minal Speed dome terminal DVR POR T B D + 9 or 16 D - 10 or 15 GND 13 ※ If GND is connected, a much sharper image quality can be seen.
SVR-1650E/1640A/950E User Manual 33 3 4. Communication por t (RS-232C) This is a por t used to connect to the PC to control the product. External devi ces ATM/POS may be connected and used. - SVR-1650E/1640A : RS-232C - SVR-950E : CONSOLE. 5. Monitor output (VGA) This is an output connector for the V GA monitor .
34 C C h h a a p p t t e e r r 4 4 . . O O p p e e r r a a t t i i o o n n m m e e t t h h o o d d 4.1 Preoperation inspection items Make sure you verif y the input power source voltage before turning on the po wer. If product used for NTSC is used with a PAL devi ce, it may malfunction initially(recognize as a NTSC device).
SVR-1650E/1640A/950E User Manual 35 4 4.3.1 FUNCTION screen display If Channel 1~16(SVR-950E: Channel 1~9) is setup as screen mode and FUNCTION button is p ressed, icons for FUNCTION-LIVE will be activ ated. FUNCTION icon can be used to setup SPOT , PTZ and PIP .
36 4.3.3 Multi screen display If MUL TI button is pressed, 16 channels are displa ye d as a 16 DIVISION screen (F or SVR-950E, channel 9 is partitioned into 9 segments on the screen.). If MUL TI button is pressed once again, a 4 DIVISION screen is displa yed.
SVR-1650E/1640A/950E User Manual 37 4 4.4 Recording 4.4.1 General recor ding If REC button is pressed, r ed LED is turned ON , N is displa yed in the upper right corner and video recording is started. If REC is pres sed again, video recording is stopped.
38 4.5 Sear ch If SEARCH button is p ressed, the follo wing search menu is di splayed. Video recor ded items can be searc hed by time , by event and b y date using the menu and played.
SVR-1650E/1640A/950E User Manual 39 4 In case of ‘TIME’, recorded images are vi ewed b y select ed time period. In case of ‘CALEND AR’, calendar helps to sea rch recorded im ages conv eniently through data and time table. After the date on the lef t calendar and the ho ur and c hannel on the right table are selected, minute can be selected.
40 4.5.2 Event search If [EVENT] is selected after SEAR CH button is p ressed, a screen for selecting the ev ent to searc h for is displayed. User can search by ev ent and play the result as needed.
SVR-1650E/1640A/950E User Manual 41 4 4.5.3 Log search Log history can be search ed to v erify the ti me for video reco rding start and stop , pow er ON/OFF , system time change (CLOCK), men u setup chan ge (SETUP). [LOG] only provides a list and doe s not play recording s.
42 4.6.1 Jog dial / shuttle ring 9 Shuttle ring: Used to incr ease/decrease pla y speed an d to change play dire ction, to mov e between men us 9 J og dial: Used to search st ill images in paused state.
SVR-1650E/1640A/950E User Manual 43 4 < Image freeze and copy functi on while LIVE or playback mod e.> (USB memory stick is nec essary.) Images can be paused and saved to USB memory stick while LIVE or playback mode. The still image is saved as bitmap (*.
44 4.8 Digital zoom If FUNCTION button is pr essed and digital z oom icon is click ed, zoom function can be used. 9 T o mov e in the expanded screen, use the up /down/left/righ t buttons . 9 D-ZOOM button operates in the sing le screen mo de for chan nel 1~16 (SVR-950E: channel 1~9).
SVR-1650E/1640A/950E User Manual 45 4 After selecting a storage medium, se lect the channel for which COPY will be carried out and the image infor mation [STAR T -REC TIME /END-REC TIM E]. Pr ess ‘FORMA T’ to for mat media and then press ‘COPY’ to copy reco rded images to the medi a from HDD .
46 4.9.1 SLiM Player SLIM Player is a program that is automatically sav ed wh en making a backup copy of a movie file on a C D or USB using the copy function of the DVR. Y ou may re pla y a backup copy of the data on a PC without installing a separate Player program on a PC .
SVR-1650E/1640A/950E User Manual 47 4 Button Name Function 7 Channel Info Display the infor mation of the channel that is sa ve d. 8 Time Info Displa y the information on the recording time fo r the file being played. 9 Control of playback sp eed Adjust the pla ying speed.
48 4.10 PTZ From the selected LIVE entire screen SINGL E mode, press the PTZ button to ad just camera Pan, Tilt, Zoom or view the screen in preset ( PTZ valu e for camera se tup in adv ance) state . There are no PTZ related buttons on the remote controll er .
SVR-1650E/1640A/950E User Manual 49 4 4.10.2 Preset setup 9 Select a desired channel from channel 1~16(SV R-950E: ch annel 1~9) in the LIVE screen and select the entire screen mod e. 9 Press PTZ to select th e PTZ mode (PTZ is displa yed in the upper right corner of the screen.
50 4.11 Quick setup Collection of frequently used menu it ems th at ca n be u sed t o modi fy set up v alues qui ckl y . It c an mo v e to t he [Quick Setup] screen b y pressing the M ENU button on the front o f the product. 9 RECORDE MODE : Manual & Event or Schedul & Ev ent setup item.
SVR-1650E/1640A/950E User Manual 51 4 4.12 PIP If FUNCTION button is pressed in entire scr een mo de, the FUNCTION scre en is displayed. If the PIP icon is pressed from here, another screen can be view ed toge ther . SVR -1650E/1640A SVR -950E Live PIP from Live screen 1.
52 4.13 System infor mation If FUNCTION button is pr essed, the FUN CTI ON screen is displa yed. If the STA TUS icon is clicke d from here, system rel ated infor mati on is displayed as shown belo w .
SVR-1650E/1640A/950E User Manual 53 4 4.14 SPOT I f F U N C T I O N b u t t o n i s p r e s s e d , t h e F U N C T I O N s c r e e n i s d i s p l a y e d . I f t h e S P O T i c o n is clicke d from here, the follo wing screen is displayed. If SP OT mo nitor is used, it can be used lik e the MUL TI function for the main monitor .
54 C C h h a a p p t t e e r r 5 5 . . S S e e t t u u p p m m e e t t h h o o d d 5.1 Menu organization Menu organization for D VR is as follows . Quick Setup Screen Setup Record Setup Event Setup Co.
SVR-1650E/1640A/950EUser Manua l 55 5 Menu organization is as fol lows. R efer to‘5.5 ~ 5.10’ for de tails. SAVE DO NO T SA VE NETWORK RS232C RS422/485 E-MAIL SCREEN SEQUENCING DISPLA Y COVE RT SP.
56 5.2 Initial value setup D VR product is shipped with the initial v alue setup liste d belo w . If the initial values hav e been changed and the user wants to get back the initial v alues the prod uct w as shipped with, click [System Setup]-[System] in the men u and set [DEF A UL T ] to [Y es].
SVR-1650E/1640A/950EUser Manua l 57 5 Record setup Main menu Lower menu Initial value RECORD RECORD MODE PR OGRAM PRE EVENT DURA TION POST EVENT DURA TION REPEA T RECORD MODE WA R N I N G L E V E L AU.
58 Record pr ogr am (SVR-1650E) NTSC PAL Order SIZE MANUAL QUALITY EVENT QUALITY SIZE MANUAL QUALITY EVENT QUALITY A 704 X 480 5 S 7 S 704 X 576 5 S 6 S B 704 X 480 3 S 4 S 704 X 576 3 S 5 S C 704 X 4.
SVR-1650E/1640A/950EUser Manua l 59 5 Record pr ogram (SVR-1640A) NTSC PAL Order SIZE MANUAL QUALITY EVENT QUALITY SIZE MANUAL QUALITY EVENT QUALITY A 704 X 480 1 H 5 S 704 X 576 1 H 5 S B 704 X 480 1.
60 Record pr ogram (SVR-950E) NTSC PAL Order SIZE MANUAL QUALITY EVENT QUALITY SIZE MANUAL QUALITY EVENT QUALITY A 704 X 480 2 H 5 S 704 X 576 2 H 5 S B 704 X 480 1 H 3 H 704 X 576 1 H 3 H C 704 X 480.
SVR-1650E/1640A/950EUser Manua l 61 5 Event setup Main menu Lower menu Initial value EVENT CHECK MESSA GE BUZZER SWITCH TO EVEN T SCREEN EVENT DISP LA Y MIN TIME EVENT DISP LA Y MAX TIME TEXT MONITORI.
62 Communication Main menu Lower menu Initial value NETWOR K TYPE DHCP IP ADDRESS SUBNET MASK GA TEW A Y DNS PORT SWR Ethernet OFF 000.000.000.000 255.
SVR-1650E/1640A/950EUser Manua l 63 5 System setup Main menu Lower menu Initial value SYSTEM LANGU AGE KEY B UZZER DEF AU L T LO AD/SA VE CONFIGURA TION FIRMW ARE DO WNLO AD REMOTE SETUP DV R AL I A S.
64 Copy Main menu Lower menu Initial value COPY COPY STA TUS 1.NONE(GSA-H55N) 2.NONE 3.NONE 4.NONE NO D AT A Exit Main menu Lower menu Initial value - SA VE DO NOT SA VE - -.
SVR-1650E/1640A/950EUser Manua l 65 5 5.3 Operation description DVR can be setup easi ly using the USB mouse. Operation using the mouse 9 Left button : It is used to select menu or chec k the setting v alue. Used to selelet menu, v erify setup v alues and canc el the popup men u.
66 5.4 FUNCTION menu 5.4.1 LIVE/PLA Y mode F or SINGLE mode setup in the LIVE screen, all LIV E functions are acti vated an d displayed. F or MUL TI mode setup in the LIVE screen, D-ZOOM, PIP , PTZ are inactiv ated and cannot be setup . If PLA Y/P A USE button is p ressed, con versi on to the PLA Y screen occurs .
SVR-1650E/1640A/950EUser Manua l 67 5 ST A TUS If ST A TUS but t on is clicked, information relate d t o the system is displayed. 9 SYSTEM INFORMA TION 1 : Displays video recording pro g ram status infor mation. 9 SYSTEM INFORMA TION 2 : Displays VERSION , IP ADDRESS , MAC AD DRESS and A UDIO infor mation.
68 SPOT If SPOT button is clicked, the SPOT setup screen is displa yed. SPOT m onitor can b e used to view SINGLE or divided scre en. DISPLA Y If MUL T I button is click ed, the MUL TI setup screen is displaye d. Main monitor can be used for li ve obser vation in SINGLE screen or di vided screen.
SVR-1650E/1640A/950EUser Manua l 69 5 AUTO If AU TO button is pressed, each c hannel and 4 DI VISION screen, 9 DIVISION s creen and 16 DIVISION screen(SVR-950E: 4 DIVISION screen , 9 DIVISION screen) are automati cally con verted and displa yed in time inter val w hich was setup in [Screen Setup]–[SEQU ENCING] in the con version men u.
70 5.5 Menu screen description Organization of the menu screen is as follows . D escription of all menu screen setup value selectio n and modification is based on the assumption that the mouse is used. 9 Main menu : Main menu corresponding to each tab can be selected.
SVR-1650E/1640A/950EUser Manua l 71 5 5.6 Screen setup If [Screen Setup] tab is click ed, low e r menu related to [Screen Setup] is displayed as shown belo w . In screen setup , [SCREEN], [SEQUENCING], [DISPLA Y], [C O VERT] , [SPOT] related se tup val ues ma y be modified.
72 V I D E O O U T P U T S E L E C T 9 Enhanced COMPOSIT E: May be sele cted when current mode is 'Enhanced V GA'. Both COMPOSITE output and V GA output is possible a n d v a l u e s f r o m - 9 t o 9 m a y b e s e t u p f o r ‘CONTRAST'.
SVR-1650E/1640A/950EUser Manua l 73 5 9 DW ELL TIME : S etup the con version display duration . Setup range is SKIP , 1~99 sec . SVR -1650E/1640A SVR -950E 9 ORDER : Setup whole channels that will be conv er ted.
74 VIDEO LOSS SKIP [ON/OFF] : If setup as[ON], channels without image si gnals will be ski pped automat ically and only chan nels with image signa ls will be displayed in the scre en.
SVR-1650E/1640A/950EUser Manua l 75 5 5.6.3 Display Infor mation to be displayed on th e liv e screen can b e selected. 9 D ATE & TIME [ON/OFF] : If setup as [ON], cu rrent time is displayed in the li ve screen. 9 HDD FREE SP A CE [ON/OFF] : If setup as [ON] , re maining capacity for the mounted hard disk driv e is displayed.
76 5.6.4 Cover t One channel among the 16 av ailable(SVR-950E: among th e 9channel ) may b e selected to setup the image hiding function. 9 LIVE CO VERT : If imag e hiding is turned ON , image is not shown for liv e screen as in V - LOSS and pri vacy can be pro tected.
SVR-1650E/1640A/950EUser Manua l 77 5 5.7 Record setup If the mouse is mov ed o ver the [R ecord Setup] tab , a video recording related lo wer me nu is displa yed as shown belo w . If ‘ENTER’ key , located in the front of D VR, is pressed or if low er level men u is selected with the mouse, det ailed items may be view ed.
78 9 W ARNING LEVEL : If av ailable space in the har d disk driv e reaches the setup percen tage, a warning message will be displayed to the user . Possible setup range is 1 ∼ 10% and 5 ∼ 10% is generally used. 9 A U DIO : Select whethe r to store voice infor mation.
SVR-1650E/1640A/950EUser Manua l 79 5 5.7.2 Record pr ogram SVR -1650E SVR-1640A 9 In the SVR-1650E series , it is possible to a ssign a different resolution to each group .
80 5.7.3 Recording time table NTSC (Installed Hard disk : 250G) FRAME, Recor ding capaci ty by picture quality SVR -1650E 704 x 480 SUPER HIGH MID LOW 120 1 Day 5 Hour 1 Day 16 Hour 2 Day 14 Hour 7 Da.
SVR-1650E/1640A/950EUser Manua l 81 5 P AL (Installed Hard disk : 250G) SVR -1650E 704 x 480 SUPER HIGH MID LOW 100 1 Day 5 Hour 1 Day 13 Hour 2 Day 10 Hour 7 Day 20 Hour 50 2 Day 0 Hour 2 Day 18 Hour.
82 5.8 Event setup F or ev ent video reco rding, a lo wer men u like t he one sho wn below can be setup . If ‘ENTER’ key , located in the front of D VR, is pressed or if lower lev el menu is selected with the mo use, detail ed items may be vi ewed .
SVR-1650E/1640A/950EUser Manua l 83 5 5.8.2 Motion detection Analyze the image input b y the camera to det ect motion. If any change is detecte d, it is counted as an even t. 9 MD CHAN NER : Setu p the chan nel for which motion detection will b e car ried out.
84 5.8.3 Relay When an event occurs , you c an generate RELA Y during sensor, mo v ement detection, lost ima ges, po wer alar m and record off using the outp ut device connected to the RELA Y OU T ter minal on the back side of the product. Blinking green box indicates the state before se lection.
SVR-1650E/1640A/950EUser Manua l 85 5 5.8.5 EVENT -PRESET This function allows eac h Speed Dome Cam era wired to the D VR for quick setup of event detection a nd positioning to the initial location allocated p er each ev ent such as sensor i nput o r motion detection.
86 5.9 Communication setup Setup items need ed to connect a co mputer to a netw ork. Communication s etup screen is as sho wn below . If ‘ENTER’ key , located in the front of DVR, is pressed or if lower lev el menu is selected with the mouse, detailed items may be view ed.
SVR-1650E/1640A/950EUser Manua l 87 5 9 SUBNET MASK : Input the [SUBNET MASK] ad dress obtained from the internet ser vice company of the user . 9 GA TEW A Y : Input the [GA TEW A Y] address obtained from th e internet ser vice company of the user . 9 DNS : Input th e [DNS] address obtain ed from the internet ser vice company of the user .
88 If using network by connecting the DVR body with IP router, you shou ld designate a port fo r DVR from the Setup Menu of the IP router . The main body of SVR-1650E/1640A/950Euses 2 ports for TCP communica tion. In addition, it uses DHCP fu nction supp orted by IP router.
SVR-1650E/1640A/950EUser Manua l 89 5 5.9.3 RS-422/485 Setup items needed to connect the product with sur veillance equipment lik e camera and CCTV . 9 SYSTEM ID : Setup ID for D VR main body wh en connecting the product with equipment lik e a controller .
90 5.9.4 E-MAIL The manager can verify details related to the generated event throu gh the email. 9 E-MAIL CHECK : If tur ned [ON], E-MAIL notice fun ction is activ ated. 9 t o .… : Setup the E-MAIL address to recei v e a transmission if an event o ccurs .
SVR-1650E/1640A/950EUser Manua l 91 5 5.9.5 DDNS Configuration 9 SWR : Decide t he use of SWR function. The SWR provides same function as below (DDN S), but this mode doesn 't support connection by us in g I D . 9 DDNS : Deci de the use of DDNS fun ction.
92 5.9.6 DDNS Registration DDNS Registration Procedure Step1) Sign up at iPOLiS website The website : www .samsungipolis .com .
SVR-1650E/1640A/950EUser Manua l 93 5 Step2) The product r egistrati on is possible after sign up.
94 .
SVR-1650E/1640A/950EUser Manua l 95 5 Step3) Configuration DDNS at DVR Select [Netw ork] > [DDNS] on OSD Men u. 9 DDNS > ‘ ON ’ 9 SER VER > Enter the DDNS ser ver ad dress(Default:www .samsungipolis .com) 9 ID & PW > E nter the ID(Do main) & P assw ord usin g the product registration at iPOLiS website .
96 5.10 System setup System setup s creen is as sho wn below . If ‘ENTER’ key , located in the front of D VR, is pressed or if lower level men u is selected with the mouse, detailed items ma y be viewed. 5.10.1 System 9 LANGU A GE : Select a languag e for the menu screen.
SVR-1650E/1640A/950EUser Manua l 97 5 L O A D / S A V E C O N F I G U R A T I O N 9 LO AD: Call the setup file stored in the USB Memor y Stick an d change the D VR setup val ue. 9 SA VE: Store the D VR setup v alue in the USB Memor y Stick This function is not compatible between SVR-1650E, SVR-1640A and SVR- 950E.
98 9 REMOTE LIVE MODE Deter mines the frame and video quality of each chann el of the network board. T h e r e a r e s i n g l e m o d e a n d q u a d m o d e . W h e n s i n g l e m o d e i s s e l e c t e d , a w i n d o w f o r s e t t i n g t h e framerate and b itrate that is sen t to the netw ork for eac h chan nel can be display ed.
SVR-1650E/1640A/950EUser Manua l 99 5 5.10.2 HDD ‘HDD’ setups in for mation for the mounted hard disk dr iv e. Basic infor mation related to HDD is displayed on the screen. Infor mation for up to 4 hard disk dri v es can be view ed. 9 INTERNAL HDD : Y ou may view the infor mat ion on the HDD inclu ded in the D VR.
100 5.10.3 Password Setup password for user and manage r to giv e auth oriz ation needed to use the p roduct and to modif y the setup . If ‘ENTER’ k ey , located in the fron t of DVR, is pressed or if lower lev el menu is selected with the mouse, de tailed items ma y be viewed.
SVR-1650E/1640A/950EUser Manua l 101 5 System user au thorization – ADMIN: Al l system set up is allowed. – USER1~USE R10: Only a llowed by authorit y. Fact ory default passw ord - Modified password should be saved on M ENU to affect after rebooting.
102 5.10.4 Date setup It is used to set up date and time for th e product. When setup is completed and stored, it is displayed on the liv e screen. 9 TIME SETUP : Setup th e date , time and deffernce from GMT . From the dialo g box s hown abov e, use th e mouse wheel or the b uttons on the front of the product to modify the setup value .
SVR-1650E/1640A/950EUser Manua l 103 5 5.10.5 PTZ If dome camera has been ins talled, camera ID can be assigned and setup for e ach ch annel to use the P AN , TIL T , ZOOM functions . 9 CH NUMBER : F or camera connected to ea ch channel, assign an ID and setup th e camera model.
104 5.11 V ideo recor ding sear ch F or video recor ding search, time, event and log file re tr iev al functions are provided. If ‘ENTER’ key , located in the front of DVR, is pressed or if lower lev el menu is selected with the mouse, detailed items ma y be viewed.
SVR-1650E/1640A/950EUser Manua l 105 5 In the CALENDAR t able, green s ection means event recording and Y ellow section means normal recording. 5.11.2 Event search R etrieval b y event types includi ng loss video , sensor and motion detection is possible .
106 5.11.3 Log search Log history for generated events can be v erified. Wh en the setup is modifie d, you can v erify submenu infor mation and authority by press [ENTER] button . < LOG file c opy function > (USB memory sti ck is necessa ry.) Log file is recorded by DVR c an be save d to USB mem ory stick.
SVR-1650E/1640A/950EUser Manua l 107 5 5.12 Copy If a storage medium is connected, video recor ded images may be copied to the storage devices . If ‘ENTER’ key , located in the front of D VR, is pressed or if lowe r level menu is selected with the mo use, detailed items may be view ed.
108 5.13 Exit Modified setup v alues are applied when they are v erified after the Sa v e button is pressed. 9 As shown in the screen belo w , when setup has b een modified an d [SA VE] is pressed, th e setup functions are applied. The setup functions ca n be cancelled b y pressing “Do NOT SA VE”.
109 C C h h a a p p t t e e r r 6 6 . . T T r r o o b b l l e e s s h h o o o o t t i i n n g g DVR is an intricate mech anic al device and it can malfunction. F or such cases, take the following measures. Product is not turned ON when stand-by switch i s pressed.
110 If the power cable connector ha s been damaged If rain or water has entered the product If a liquid has been spilled on the product or if a foreign substan ce has entered the product .
Pr oduct Specifications NTSC Model SVR-1650E SVR-1640A SVR-950E Power Source AC 100V~240V ,(50/60Hz), Max. 2A Power Consumption Max. 75W(1 HDD) Video Input 16Ch 9Ch Monitor A 2 BNC, 1 VGA, 1 RCA(Front.
PAL Model SVR-1650E SVR-1640A SVR-950E Power Source AC 100V~240V ,(50/60Hz), Max. 2A Power Consumption Max. 75W(1 HDD) Video Input 16Ch 9Ch Monitor A 2 BNC, 1 VG A, 1 RCA(Front) Video Output Monitor B.
Dimensions.
SAMSUNG TECHWIN CO., L TD. 145-3, Sangdaewon-dong, Jungwon-gu Seongnam-si Gyeonggi-do 462-120, Korea T el: +82-31-740-8151~8 Fax: +82-31-740-8145 SAMSUNG OPT O-ELECTRONICS UK, L TD. Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey , Surrey KT16 OPS T el: +44-1932-45-5308 Fax: +44-1932-45-5325 SALES NETW ORK I-H-0805 P/No.
Ein wichtiger Punkt beim Kauf des Geräts Samsung SVR-950E (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Samsung SVR-950E noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Samsung SVR-950E - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Samsung SVR-950E reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Samsung SVR-950E erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Samsung SVR-950E besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Samsung SVR-950E verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Samsung SVR-950E. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Samsung SVR-950E gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
