Benutzeranleitung / Produktwartung SRD-870DC des Produzenten Samsung
Zur Seite of 128
8 Channel 16 Channel DVR User Manual SRD-830DC/850DC/870DC/ 1610DC/1630DC/1650DC/1670DC.
2_ overview FEATURES The SRD DVR (Digital Video Recorder) employs H.264 video encoding for 8 or 16 channel inputs and G.723 audio encoding for 4 or 16 channels while simultaneously supports hard disc recording and playback. These DVRs also supports network connectivity, providing remote monitoring from a remote PC transferring video and audio data.
English _3 OVERVIEW IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. Read these instructions.
4_ overview overview BEFORE START This user manual provides Information for using the DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, etc. You have to keep in mind the following notices : SAMSUNG retains the copyright on this manual.
English _5 OVERVIEW Standards Approvals This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
6_ overview overview CONTENTS OVERVIEW 2 Features 3 Important Safety Instructions 4 Before Start 8 Part Names and Functions (Front) 10 Part Names and Functions (Rear) 13 Remote Control INSTALLATIO.
English _7 OVERVIEW SEARCH & PLAY 68 Search 71 Playback WEB VIEWER 73 Introducing Web Viewer 74 Connecting Web Viewer 75 Using Live Viewer 81 Using Search Viewer 85 Viewer Setup .
8_ overview overview PART NAMES AND FUNCTIONS (FRONT) 830DC/850DC/870DC 1610DC/1630DC/1650DC/1670DC 1234 5678 90 ALARM HDD NETWORK BACKUP REC DVD RECORDER REC ZOOM MODE FREEZE AUDIO BACKUP ALRAM SEARC.
English _9 OVERVIEW Part Names Functions LED Indicator ALARM : Lights on when an event occurs. HDD : Displays the normal access to HDD. Upon access to HDD, LED repeats on and off. NETWORK : Displays both network connection and data transfer status.
10_ overview overview PART NAMES AND FUNCTIONS (REAR) 830DC 1610DC/1630DC 850DC 1650DC 1 3 2 4 5 6 9 10 11 12 14 13 1 3 2 4 5 6 9 10 11 12 14 13 1 3 2 4 5 6 7 8 9 10 11 12 14 13 1 3 2 4 5 6 7 8 9 10 1.
English _11 OVERVIEW 870DC 1670DC 1 3 2 4 5 6 7 8 9 10 11 12 14 13 1 3 2 4 5 6 7 8 9 10 11 12 14 13.
12_ overview overview Part Names Functions AUDIO IN Audio input signal port (RCA jack) and port for optional audio extension cable. SRD-1650DC/1670DC (Audio 5~16CH) SRD-850DC/870DC (Audio 5~8CH) AUDIO OUT Audio Signal Output Port (RCA jack). VIDEO IN Composite Video Signal Input Port (BNC type connector).
English _13 OVERVIEW REMOTE CONTROL Using the numeric buttons CHANNEL 1–9 Press each button between 1 to 9. CHANNEL 10 Press the [ + 10 ] button first, then press the 0 button again within 3 seconds. CHANNEL 11–16 Press the [ + 10 ] button first, then press any number between 1 to 6 within 3 seconds.
14_ installation Please take note of the followings before using this product. Do not use the product outdoor. Do not spill water or liquid in the connection part of the product. Do not impose the system to excessive shock or force. Do not pull out the power plug forcefully.
English _15 INSTALLATION RACK INSTALLATION Install the Bracket-Rack as shown in the figure, and then fasten the screws on both sides (2 screws on each side). Fix the screws not to be loosened by vibrations. HDD ADDITION You can install additional HDDs.
16_ installation installation First, loosen the screws on both sides and remove the cover. Disconnect the power and HDD Signal cable from the existing HDDs, then loosen the screws (x4) in the left/right and upper sides and remove the upper brackets. Install a HDD (x1) on the lower bracket and fix it with screws.
English _17 INSTALLATION When the installation of additional HDDs is done, connect the power cable and connect the HDD data cables (SATA Cable) to connectors c ~ h on the main board. Note that the number of a HDD data calbe is nothing to do with operation of the HDD.
18_ connecting with other device The following figures are based on Model SRD-1670DC . CONNECTING THE VIDEO, AUDIO, AND MONITOR CONNECTING THE USB There are two USB ports at the front and one at the back of the product. You can connect a USB HDD, USB CD/DVD player, USB memory or mouse to the USB port.
English _19 CONNECTING WITH OTHER DEVICE CONNECTING EXTERNAL SATA HDD SRD-830DC/1610DC/1630DC does not support a port for SATA connection. There are two external SATA ports on the rear side of the product. If an external SATA HDD is connected to the system, recognition and settings are available in “ Menu > Device > Storage Device ”.
20_ connecting with other device connecting with other device ALARM IN 1 ~ 8 (SRD-830DC/850DC/870DC) : Alarm Input Port ALARM IN 1 ~ 16 (SRD- 1610DC/1630DC/1650DC/1670DC) : Alarm Input Port ALARM RESET : On receiving an Alarm Reset signal, the system cancels the current Alarm Input and resumes sensing.
English _21 CONNECTING WITH OTHER DEVICE CONNECTING THE NETWORK Connecting to Internet through Ethernet (10/100/1000BaseT) Connecting to the Internet using the router Router xDSL or Cable Modem xD.
22_ connecting with other device connecting with other device Connecting to Internet through ADSL Hub/Switcher Phone(ADSL) Line ADSL MODEM RJ-45 Ethernet Cable (Direct Cable) Windows Network Viewer IN.
English _23 LIVE GETTING STARTED Starting the system Connect the power cable of the DVR to the wall outlet. Press the Power button on the front panel. You will see the initialization screen. The initialization process will last about 1 minute. If a new HDD is installed, the initialization process may take longer.
24_ live live Login To access a DVR or restricted menu, you should have logged in to the DVR. In live mode, right-click any area of the screen. You will see the context sensitive menu as in the right figure. Click < Login >. The login dialog appears.
English _25 LIVE LIVE SCREEN CONFIGURATION Icons on the Live Screen You can check the status or operation of the DVR with the icons on the live screen. Name Description Current Date, Time Displays the current time and date. Login Information When you are logged in, the “ LOG ON ” icon will be displayed.
26_ live live Error Information If you turn on the system when the internal HDD is not connected or an error occurs, the “HDD FAIL” icon ( ) will be displayed on the top left corner. In this case, make sure you contact the service center for assistance as this may cause a failure of recording, playback or backup.
English _27 LIVE Menu Description Scene Mode Refer to “ Live Mode ”. (Page 29 ) Spot Out Refer to “ Spot Out ”. (Page 31 ) Audio On/Off Refer to “ Audio ON/OFF ”. (Page 32 ) Freeze Refer to “ Freeze ”. (Page 32 ) Stop Alarm Stops the alarm output and the event monitoring.
28_ live live View the Launcher Menu The Launcher menu appears on the bottom of the live screen. In Live mode, right-click to display the context menu and select < Show Launcher >. Move the cursor to the bottom and click a desired item in the Launcher menu.
English _29 LIVE LIVE MODE SRD-1610DC/1630DC/1650DC/1670DC display Live images from 16 channels in a total of 8 layout of split screens. Switching the screen mode To switch the split mode, select a screen mode in the launcher menu, or right-click to select a screen mode in the context menu.
30_ live live Manual Switching Press the left/right button on the front panel or the remote control, or click the arrow < ◄ / ► > key to move to the next split mode.
English _31 LIVE Switching to Single Mode When in split mode, select and double-click a desired channel to switch to its Single mode. Press the number corresponding to a desired channel on the front panel or the remote control to switch to its Single mode.
32_ live live ZOOM This is available only in Single Live mode. In Single mode, select a desired area and use the Zoom function to enlarge it twice. Select < ZOOM > in the right-click menu. Press the [ ZOOM ] button on the front panel or the remote control, or simply click < > in the launcher menu.
English _33 LIVE EVENT MONITORING This will display the channel in sync with a specific event (Sensor/Motion/Video Loss) if it occurs. In “ Monitor > Event Display ”, set the event monitoring to ON/OFF and specify the event display time. (Page 50 ) If multiple events occur simultaneously, the screen will switch to a split mode.
34_ using the DVR Y ou can setup the system properties, devices, and options for recording, event, backup and network. SYSTEM SETUP Y ou can setup Date/T ime/Language, Permission, System Properties and Log.
English _35 USING THE DVR - Time Server : Enter an IP or URL address of the time server. - Last Sync Time : Displays the most recent synchronization time from the selected time server. - Activate as Server : Set to < Use > to allow the DVR to act as a Time Server for other DVRs.
36_ using the DVR VTJOHUIF%73 Permission Management Y ou can set permissions of each user over the DVR's specific function and settings. Setting the Administrator Y ou can set and change Administrator’ s ID and password. The administrator can use and set all menu items and functions.
English _37 USING THE DVR Setting the Group Y ou can create user gr oups and setup permissions for those user groups. Y ou can register a user for each gr oup in < User >.
38_ using the DVR VTJOHUIF%73 T o r estrict the user permissions If the admin restricts all permissions of an added gr oup, the users belonging to that group can access only the default minimum menus and can change the user’ s own passwor d only .
English _39 USING THE DVR Setting the User Users can be added only if a group was cr eated in < Group > menu. Using the mouse may help make setup easier . Use the up/down buttons ( ) in < System > window to move to < Permission Management >, and press [ ENTER ] button.
40_ using the DVR VTJOHUIF%73 Manual Input of ID : Prompts you to enter the user ID manually for the login process. - Checked ( ) : Encloses the registered user IDs with the [ ½ ] symbols. Use the virtual keyboard to enter the user ID. When the permission setup is done, press < OK >.
English _41 USING THE DVR Updating the Software Connect a device storing the software to be updated. (It may take about 10 seconds to recognize the device.) Upgradeable devices include USB memory , CD/DVD and network device. T o update the network, the current DVR should have been connected to the network.
42_ using the DVR VTJOHUIF%73 Settings Y ou can copy and import the DVR settings by using a storage media. Using the mouse may help make setup easier . Use the up/down buttons ( ) in < System > window to move to < System Management >, and press [ ENTER ] button.
English _43 USING THE DVR Event Log Event log shows recor ded events on alarms, motion detections and video loss. It also shows the log and its timestamp. Using the mouse may help make setup easier . Use the up/down buttons ( ) in < System > window to move to < Log Information >, and press [ ENTER ] button.
44_ using the DVR VTJOHUIF%73 SETTING THE DEVICE Y ou can setup Camera, Storage Device, Remote Device, POS Device and Monitor . Camera Setting the Camera Y ou can set Video, Audio, Channel Name and Dwell T ime of a Camera. Using the mouse may help make setup easier .
English _45 USING THE DVR CH Name : Up to 15 characters including blanks are allowed. Refer to “ Using Virtual Keyboard ”. (Page 36 ) SEQ-Dwell Time : Y ou can set the dwell time between channels for the Live screen and Spot Out. If set to < OFF >, the channel is not listed in the Auto Sequence mode.
46_ using the DVR VTJOHUIF%73 Storage Device Y ou can check information on storage devices. Confirming Devices Y ou can check storage devices and their free space, usage as well as status. Devices available are HDD, and USB devices (Memory , HDD, CD/DVD).
English _47 USING THE DVR Formatting Y ou can format a storage device. Using the mouse may help make setup easier . Use the up/down buttons ( ) in < Device > window to move to < Storage Device >, and press [ ENTER ] button. Select < Format >.
48_ using the DVR VTJOHUIF%73 Duration : Sets the alarm duration for the alarm signal and beep sound. - Check Alarm, Replace Alarm signals will output through the selected alarm out ports (1, 2, 3, and 4). - If < BEEP > was selected, a beep will sound.
English _49 USING THE DVR POS Device Setup : Sets the communication setups for the POS device and DVR. It is independent to the Remote Device setup. CH : Select the camera to be synchronized to the POS device. If selected a channel input field, “ Sync Channel Setup ” window appears.
50_ using the DVR VTJOHUIF%73 Monitor Y ou can configure information to be displayed and its format for Spot Out monitor . Setting the Monitor Using the mouse may help make setup easier . Use the up/down buttons ( ) in < Device > window to move to < Monitor >, and press [ ENTER ] button.
English _51 USING THE DVR Setting the Spot Out Y ou can set the DVR to output information / video apart from the monitor out. Using the mouse may help make setup easier . Use the up/down buttons ( ) in < Device > window to move to < Monitor >, and press [ ENTER ] button.
52_ using the DVR VTJOHUIF%73 SETTING THE RECORDING Y ou can setup scheduled recor ding, event recor ding and other recording related settings. Recording Schedule Make your reservation on a date and time to schedule the r ecording on specified time.
English _53 USING THE DVR Recording Color T ags Color Function Description White No Recording No schedule / event recording Orange Continuous Scheduled recor ding only Blue Event Event recor ding .
54_ using the DVR VTJOHUIF%73 Setting Event Recording Pr operties Y ou can set each channel’ s resolution, quality and IPS for event r ecordings. Using the mouse may help make setup easier . Use the up/down buttons ( ) in < Record > window to move to < REC Quality & Resolution >, and press [ ENTER ] button.
English _55 USING THE DVR Disk End Mode : If selected < Overwrite >, recor ding will continue despite the HDD full while overwriting the oldest. If selected < Stop >, the recor ding will stop when the HDD is full. Disk End Beep : If selected < Stop >, the button is activated.
56_ using the DVR VTJOHUIF%73 Alarm : Sets the alarm output method. For further information on alarm output, refer to “ HDD Alarm > Alarm ”. (Page 47 ) Duration : Sets the duration of alarm signal and alarm sound. When the sensor detection setup is done, press < OK >.
English _57 USING THE DVR Video Loss Detection Y ou can set the alarm to be generated on a camera disconnection, which causes a video loss. Using the mouse may help make setup easier . Use the up/down buttons ( ) in < Event > window to move to < Video Loss Detection >, and press [ ENTER ] button.
58_ using the DVR VTJOHUIF%73 BACKUP Y ou can check the backup device and set the backup schedule by channel or by time. The product only supports external HDD of USB memory/DVD and USB/SA T A type. (Page 98 ) Setting the Backup Y ou can backup the desired data to a connected device.
English _59 USING THE DVR When the backup setup is done, press < OK >. If no available device is recognized for backup, < OK > button is not activated. The application may slow down during the backup. Y ou can switch to the menu screen during the backup in operation, but playback of data is not available.
60_ using the DVR VTJOHUIF%73 IP , Gateway , Subnet Mask, and DNS - For < Static IP > : Y ou can directly input IP address, Gateway , Subnet Mask and DNS. - For < Dynamic IP > : IP address, Gateway , and Subnet Mask are set automatically .
English _61 USING THE DVR DDNS Y ou can set the DDNS site for a remote user’ s network connection. Using the mouse may help make setup easier . Use the up/down buttons ( ) in < Network > window to move to < DDNS >, and press [ ENTER ] button.
62_ using the DVR VTJOHUIF%73 When a router is used T o avoid IP address conflict with the DVR's static IP , check followings : Setting the DVR with a static IP - Internet connection : Y ou can connect the DVR to a router which is connected to an ADSL/Cable modem or a router in a Local Ar ea Network (LAN) environment.
English _63 USING THE DVR DDNS Setting DDNS is a short form of Dynamic Domain Naming System. DNS (Domain Name System) is a service that routes a domain name consisting of user friendly characters (ex : www .google.com) to an IP address consisting of numbers (64.
64_ using the DVR VTJOHUIF%73 Mailing Service Y ou can send an e-mail to a DVR-register ed user at a specific time interval, or if an event occurs.
English _65 USING THE DVR Group Setting Y ou can set the group to whom the e-mail is sent, and specify the permission for each gr oup. Y ou can add recipients for each gr oup in the < Recipient > menu item. The recipient is set separately fr om the DVR user group.
66_ using the DVR VTJOHUIF%73 CONTROLLING A PTZ DEVICE The DVR enables you to adjust the settings of a PTZ camera as well as an ordinary one to your pr eference. PTZ Device The PTZ device can be activated only if a channel in connection with the PTZ camera is selected.
English _67 USING THE DVR Focus : Enables you to adjust the focus manually . Auto Pan : The camera automatically runs between the two points that you selected. This is not available for the coaxial type of communication. Scan : The camera moves to the preset points in the specified sequence.
68_ search & play SEARCH Y ou can perform the search for r ecorded data by the time or by the sear ch criteria such as an event. Y ou can access the < Search > menu directly in Live mode. In Live mode, right-click any area of the scr een. The Live menu appears.
English _69 SEARCH & PLAY Zoom In : The map enlarges in detail. It will switch in the sequence of 24 hours - 4 hours - 1 hour - 5 minutes. Zoom Out : The map will switch in the reverse or der of the detailed mode above. It will switch in the sequence of 5 minutes - 1 hour - 4 hours - 24 hours.
70_ search & play TFBSDIQMBZ POS Search Y ou can search for data in the POS device that is connected to the DVR. Y ou can use the mouse to select the related items. Select < POS Search > in the < Search > menu. Use direction buttons ( ◄ ► ) to set the search criteria and press the [ ENTER ] button.
English _71 SEARCH & PLAY PLA YBACK Play Y ou can play data stored in the HDD and backup a desir ed portion of the data. Using the mouse may help make setup easier . In Live mode, click < Play > in the right-click menu or < > in the launcher menu, or press the Play button on the remote contr ol or the front panel.
72_ search & play TFBSDIQMBZ Using the Playback Button Part Names Functions Play Timeline Indicates the current playback point, and can be used to move. Skip Backward Moves backward by unit time. Backward Fast Play Used for quick backward search while in Play .
English _73 WEB VIEWER INTRODUCING WEB VIEWER What is Web Viewer? Web Viewer allows r emote access to your DVRs. Y ou have access to live video, archived video, PTZ contr ol (if configured), etc.
74_ web viewer XFCWJFXFS CONNECTING WEB VIEWER Open your web browser and type the IP addr ess or URL of DVR into the URL address box. The basic URL of the DVR is as following in case of MAC address : 00-00-F0-ab-cd-ef : nabcdef.websamsung.net 00-16-6c-ab-cd-ef : mabcdef.
English _75 WEB VIEWER USING LIVE VIEWER The Live Viewer screen consists of following : This displays the IP address and the model name of the connected DVR. These menus consist of < LIVE >, < SEARCH >, < SETUP >, < ABOUT >.
76_ web viewer XFCWJFXFS OSD INFORMA TION DISPLA Y The channel number , video size, and IP address of the connected DVR are displayed. The current date and time will be displayed accor ding to the selected time information display setting < DVR Time > or < PC Time >.
English _77 WEB VIEWER CONNECTED DVR This displays the IP address and the status of the connecting DVR. Connection failure message No Response : Appears when the DVR does not respond. Access Denied : Appears when the maximum number of users is exceeded.
78_ web viewer XFCWJFXFS NEXT : When this button is clicked, the next screen appears. In SINGLE MODE, the channel numbers are sequentially switched fr om 1 to 16. In QUAD MODE, the screens ar e changed like 1st 4 channels (1~4) 2nd 4 channels (5~8) 3r d 4 channels (9~12) 4th 4 channels (13~16).
English _79 WEB VIEWER RECORD : Saves the current image on the scr een and saves it as a avi video file. T o record it, it is required at least 1GB of available space. The default saving path is “C:Program FilesSamsungDvr Web ViewerVideoClipLive”.
80_ web viewer XFCWJFXFS MENU : Appears the camera menu screen. PRESET : Moves the lens direction to a pr eset direction. If you click a preset, the camera moves to the selected preset's position. Y ou can delete the selected preset or all pr esets.
English _81 WEB VIEWER USING SEARCH VIEWER The Search Viewer scr een consists of following : This displays the IP address and the model name of the connected DVR. These menus consist of < LIVE >, < SEARCH >, < SETUP >, < ABOUT >.
82_ web viewer XFCWJFXFS SPLIT -SCREEN Y ou can change the split mode by clicking each number icon. Click < > button. The screen displays the selected camera connected to the DVR in “ SINGLE MODE ”. Click < > button. The screen displays the selected camera connected to the DVR in “ QUAD MODE ”.
English _83 WEB VIEWER SA VING THE LIVE SCREEN ON THE PC CAPTURE : Saves the current scr een into a BMP or JPEG file. The default saving path is “C:Program FilesSamsungDvr Web ViewerSnapShotSearch”. T o change the saving path, click < SAVE PATH ( )> button and then select the path you want.
84_ web viewer XFCWJFXFS SEARCHING THE RECORDED VIDEO IN THE CALENDAR If the video data has been recor ded on a date, the date is distinguished in green. If you click the date, the r ecorded video information is displayed in the time line. When you click < T oday >, it is changed to today’ s date.
English _85 WEB VIEWER CONTROLLING PLA YBACK Fast Backward : Reverse-plays faster(2x). Reverse Play : Performs Reverse Play . Play : Performs playback. Fast Forward : Plays faster(2x). Go to First : Moves the beginning time of recor ded video in the time line.
86_ web viewer XFCWJFXFS Time Synchronization Setup Set the time synchronization. Display Date Format : Set the date type. Time : Select a time format to display on the screen. DST (Daylight Saving Time) DST is displayed an hour ahead of the standard time of the time zone.
English _87 WEB VIEWER Group Users are classified into gr oups and the permission can be set according to the gr oup. First of all, add a group. User Y ou can add, change or remove a user or users.
88_ web viewer XFCWJFXFS Device Y ou can check a list of devices that are connected to the DVR and configur e the necessary settings. Click < Device > in the menu screen. For more information, r efer to “ Setting the Device ”. (Page 44 ) Camera Camera Y ou can configure the settings of the camera that is connected to the DVR.
English _89 WEB VIEWER HDD Alarm Y ou can set the alarm output channel and the alarm duration for an error . Remote Device Y ou can see a list of remote devices including PTZ cameras and system keyboards that ar e connected to the RS-485 port of the DVR and configure the necessary settings.
90_ web viewer XFCWJFXFS Spot Out The register ed user can view the event screen for the duration set in < Event Display > if an event occurs from the appr opriate channel. The number of Spot Out terminals differs according to the model. Mode Y ou can switch between live mode and play mode.
English _91 WEB VIEWER Event Record Duration Y ou can set the start and end times of recor ding that will be activated if an event occurs. REC Quality & Resolution Standard/Event Y ou can set the resolution, frame rate and r ecording quality for each channel.
92_ web viewer XFCWJFXFS Motion Detection Y ou can set the motion detection mode and the sensitivity as well as the alarm output type and the duration. Motion Region Set the target motion detection area Video Loss Detection Y ou can set the alarm output time if a video loss occurs.
English _93 WEB VIEWER Network For more information, r efer to < Network Configuration >. (Page 59 ) Connection A remote user can access the DVR via the network to check the current mode and the IP addr ess. Connection Y ou can set the network connection route.
94_ web viewer XFCWJFXFS Mailing Service Y ou can specify the SMTP server that sends a mail if an event occurs and set the recipient gr oup and users. SMTP Y ou can set the server that sends mails and specify if you use the authentication process. Event Y ou can set the event interval and specify which events the server sends mails for .
English _95 WEB VIEWER ABOUT Click < ABOUT >. Displays the model name of connected DVR and the version of Web Viewer ..
96_ backup viewer SEC BACKUP VIEWER Y ou can play a file that is backed up in the format of SEC. Backup in the format of SEC will involve in generating two files: one for the backup data and one for the viewer . If you run the backup file viewer , the backup data file will be automatically played.
English _97 BACKUP VIEWER Name Description Audio / A toggle button. Each time you press this button, the audio output will toggle between activated and deactivated. Y ou can adjust the volume level from 0 to 100. Screen Printout Saves the current screen as an image file.
98_ appendix PRODUCT SPECIFICA TION (SRD-830DC/1610DC/1630DC) Item Details Note Operating System Embedded OS Broadcast Format NTSC/PAL System Input Voltage AC 100~240V Power Consumption SRD- 830DC/1610DC/1630DC : 55W Video Video In Composite 16(8) Channel - 1.
English _99 APPENDIX Item Details Note Record Compression Method Video : H.264 Audio : G.723 Resolution & Quality Resolution Spec. (Quality) Max Recording Rate CIF(S) 352X240(NTSC) /352X288(P .
100_ appendix BQQFOEJY Item Details Note Play Display Mode Single /4-/9-/13-/16-splits SRD-1610DC SRD-1630DC Single /4-/9-/13-splits SRD-8300DC Play Mode Play , Pause, Stop, 2xDigital Zoom Fast Forwar.
English _101 APPENDIX PRODUCT SPECIFICA TION (SRD-850DC/870DC/1650DC/1670DC) Item Details Note Operating System Embedded OS Broadcast Format NTSC/PAL System Input Voltage AC 100~230V (P AL) AC 110~220V (NTSC) Power Consumption SRD- 870DC : 56W SRD- 1670DC : 60W SRD- 850DC/1650DC : 55W Video Video In Composite 16(8) Channel - 1.
102_ appendix BQQFOEJY Item Details Note Record Compression Method Video : H.264 Audio : G.723 Resolution & Quality Resolution Spec. (Quality) Max Recording Rate CIF(S) 352X240(NTSC) /352X288(P AL.
English _103 APPENDIX Item Details Note Play Resolution & Specification Resolution Specification CIF(S) 352X240(NTSC) /352X288(P AL) 480(240)ips(NTSC)/ 400(200)ips(P AL) 2CIF(M) 704x240(NTSC.
104_ appendix BQQFOEJY PRODUCT OVERVIEW SRD-1670DC • USB.
English _105 APPENDIX DEF AUL T SETTING This returns the factory default settings. The settings are made as follows; Use System/Load Factory Default in MENU The default settings are based on SRD-1670DC .
106_ appendix BQQFOEJY Category Details Factory Default Device POS Device OFF Monitor Monitor Display All Switch to Split Screen 5 sec VGA 800x600 HDMI 480p Sharpness Level1(Low) Display Position Setu.
English _107 APPENDIX Category Details Factory Default Recording Event Video Loss Detection Video Loss State OFF Alarm None Duration 10 sec Network Connection Mode Connection Connection Mode Static IP Bandwidth 2Mbps IP 192.168.1.200 Gateway 192.168.
108_ appendix BQQFOEJY TROUBLESHOOTING Symptom Countermeasures The system does not turn on and the indicator on the front panel does not work at all. Check if the power supply system is properly connected. Check the system for the input voltage from the power source.
English _109 APPENDIX Symptom Countermeasures I've found that the DVR does not recognize as many disks as installed when I have connected multiple external HDDs to the DVR.
110_ appendix BQQFOEJY Symptom Countermeasures Recording does not work. If your player does not display a Live image at all, that indicates recording does not work so first check if you see an image on the screen. Recording does not work if the recording settings are not properly configured.
GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
How to Apply These T erms to Y our New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.
Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users' freedom to change the software.
The Corresponding Source for a work in source code form is that same work. 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program.
offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is cov.
Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with.
litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it.
and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know th.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: The modified work must itself be a software library.
the work for the customer’s own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances.
write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the library, if necessary.
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.
Ein wichtiger Punkt beim Kauf des Geräts Samsung SRD-870DC (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Samsung SRD-870DC noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Samsung SRD-870DC - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Samsung SRD-870DC reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Samsung SRD-870DC erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Samsung SRD-870DC besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Samsung SRD-870DC verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Samsung SRD-870DC. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Samsung SRD-870DC gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.