Benutzeranleitung / Produktwartung PS42A451P1XXC des Produzenten Samsung
Zur Seite of 45
Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/global/register imagine the possibilities Plasma TV user manual BN68-01.
English - 2 © 2008 Samsung Electronics Co., Ltd. All rights reserved. User Instructions Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention.
English - 3 Symbols ☛ ➢ Press Important Note Contents General Information User Instructions ............................................. 2 Checking Parts ................................................ 4 Using the Stand-Base ........
English - 4 Checking Parts Owner ’s Instructions Remote Control/ AAA Batteries Power Cord Cloth-Clean Registration Card Cover-Bottom / Screws (2ea) (Refer to page 38) Ferrite Core for Power Cord Fer.
English - 5 Control Panel 1 SOURCE T oggles between all the available input sources ( TV , Ext.1 , Ext.2 , A V , S-V ideo , Component , PC , HDMI1 , HDMI2, HDMI3) . ➢ In the on-screen menu, use this button as you would use the ENTER button on the remote control.
English - 6 Connection Panel Continued... ☛ Whenever you connect an audio or video system to your set, ensure that all elements are switched off. When connecting an external device, match the colour of the connection terminal to the cable.
English - 7 7 HDMI IN 1,2 − No additional Audio connection is needed for an HDMI to HDMI connection. − When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack. ➢ What is HDMI? - “High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of digital audio.
English - 8 Viewing the Remote Control 1 POWER button (turns the TV on and of f) 2 Selects the TV mode directly 3 Number buttons for direct channel access 4 One/T wo-digit channel selection 5 T emporary sound switch-off 6 V olume increase V olume decrease 7 Channel control button (Refer to page 15) 8 Use to quickly select frequently used functions.
English - 9 Installing Batteries in the Remote Control 1 Lift the cover at the back of the remote control upward as shown in the figure. 2 Install two AAA size batteries. ➢ Make sure to match the “ + ” and “ – ” ends of the batteries with the diagram inside the compartment.
English - 10 Plug & Play Feature When the television is initially powered on, several basic customer settings proceed automatically and subsequently . The following settings are available. ☛ If you accidentally select the wrong country for your TV , the characters on the screen may be wrongly displayed.
English - 1 1 7 Press the ENTER button to start search the channels. The channel search will start and end automatically . After all the available channels are stored, Clock Set menu is automatically displayed. Press the ENTER button. 8 Press the ◄ or ► button to select Month , Day , Y ear , Hour , or Minute .
English - 12 Viewing External Signal Sources Y ou can switch between viewing signals from connected equipment, such as a VCR, DVD, Set-T op Box, and the TV source (broadcast or cable). 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Input , then press the ENTER button.
English - 13 Editing Device Names Y ou can give a name to the external source. 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Input , then press the ENTER button. 3 Press the ▲ or ▼ button to select Edit Name , then press the ENTER button.
English - 14 Storing Channels Manually Y ou can store television channels, including those received via cable networks. When storing channels manually , you can choose: Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify .
English - 15 Adding / Locking Channels Using the Channel Manager , you can conveniently lock or add channels. 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Channel , then press the ENTER button. 3 Press the ▲ or ▼ button to select Channel Manager , then press the ENTER button.
English - 16 Sorting the Stored Channels This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store. 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Channel , then press the ENTER button.
English - 17 Fine T uning Channel Reception If the reception is clear , you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually .
English - 18 Customizing the Picture Settings Y our television has several setting options that allow you to control the picture quality . 1 Press the MENU button to display the menu. 2 Press the ENTER button to select Picture . 3 Press the ENTER button again to select Mode .
English - 19 Configuring Detailed Settings on the Picture Y ou can set detailed picture settings. 1 Press the MENU button to display the menu. 2 Press the ENTER button to select Picture . 3 Press the ▲ or ▼ button to select Detailed Settings , then press the ENTER button.
English - 20 Picture Options Y ou can set detailed picture settings. 1 Press the MENU button to display the menu. 2 Press the ENTER button to select Picture . 3 Press the ▲ or ▼ button to select Picture Options , then press the ENTER button. 4 Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
English - 21 Screen Mode: 16:9/Wide Zoom/Zoom/4:3 When setting the picture size to Auto Wide in a 16:9 wide TV , you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it.
English - 22 ➢ Optimum condition for pixel shift; PC TV/Ext/A V/Component/HDMI Horizontal Dot 1 2 V ertical Line 1 2 Time (minute) 2 2 min ➢ The Pixel Shift value may differ depending on the monitor size (inches) and mode. ➢ This function is not available in the Just Scan mode.
English - 23 Sound Features 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Sound , then press the ENTER button. 3 Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
English - 24 Selecting the Sound Mode (depending on the model) The DUAL I-II button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “DUAL-I” or “Stereo”, depending on the current transmission.
English - 25 Time Features 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Setup , then press the ENTER button. 3 Press the ▲ or ▼ button to select Time , then press the ENTER button. 4 Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
English - 26 Language / Melody / Light Effect / Entertainment / Energy Saving / PIP 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Setup , then press the ENTER button. 3 Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
.
English - 28 Input Mode (PC) Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: D-Sub In.
English - 29 Setting the PC ➢ Preset to the PC mode by pressing the SOURCE button. 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Picture , then press the ENTER button. 3 Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
English - 30 Connecting Anynet + Devices The Anynet + system supports A V devices supporting Anynet + only . Check if there is an Anynet + mark on the A V device to be connected to the TV .
English - 31 Setting Up Anynet + The following settings are to use Anynet + functions. Using the Anynet + Function 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Input , then press the ENTER button. 2 Press the ▲ or ▼ button to select Anynet + (HDMI-CEC) , then press the ENTER button.
English - 32 Anynet + Menu The Anynet + menu changes depending on the type and status of the Anynet + devices connected to the TV . Anynet + Menu Description View TV Switches from Anynet + to TV broadcast mode. Select Device Y our TV connects to the corresponding device.
English - 33 Listening through a Receiver Y ou can listen to sound through a receiver instead of the TV speaker . 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Input , then press the ENTER button. 2 Press the ▲ or ▼ button to select Anynet + (HDMI-CEC) , then press the ENTER button.
English - 34 T eletext Feature (depending on the model) Most television stations provide written information services via teletext. The index page of the teletext service gives you information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons.
English - 35 The teletext pages are organized according to six categories: Part Contents A B C D E F Selected page number . Broadcasting channel identity . Current page number or search indications. Date and time. T ext. Status information. F ASTEXT information.
English - 36 W all Mount Kit Specifications (VESA) Install your wall mount on a solid wall perpendicular to the floor . When attaching to other building materials, please contact your nearest dealer . If installed on a ceiling or slanted wall, it may fall and result in severe personal injury .
English - 37 Entering the menu 1 Press the ▲, ▼, ◄ or ► button on your remote control. ➢ The W all Mount Adjustment screen is displayed. ➢ If the W all Mount Adjustment screen is not displayed when clicking on a direction button while watching your TV , use the menu to display that screen.
English - 38 How to assemble the Stand-Base (depending on the model) Using the 6 screws for securing the stand base and the monitor , firmly attach the monitor to the stand base.
English - 39 Securing the TV to the W all Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular , ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over , causing serious injuries or death.
English - 40 T roubleshooting Before contacting the Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below , note the model and serial number of the television and contact your local dealer .
English - 41 Specifications The descriptions and characteristics in this booklet are given for information purposes only and are subject to modification without notice.
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. T o ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
IMPORT ANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used.
Th i s p ag e i s i n t e n t i o n a l ly l e f t b l a n k . BN68-01417D-00.indb 44 2008-5-29 17:11:53.
Correct Disposal of This Product ( W aste E lectrical & E lectronic E quipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
Ein wichtiger Punkt beim Kauf des Geräts Samsung PS42A451P1XXC (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Samsung PS42A451P1XXC noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Samsung PS42A451P1XXC - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Samsung PS42A451P1XXC reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Samsung PS42A451P1XXC erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Samsung PS42A451P1XXC besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Samsung PS42A451P1XXC verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Samsung PS42A451P1XXC. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Samsung PS42A451P1XXC gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
