Benutzeranleitung / Produktwartung Two-Way Led Transmission Remote Starter des Produzenten Autostart
Zur Seite of 14
DOC: 1.00 (i) – August 29, 2006 DL Lp Manufactured in Canada by Autostart TWO-WAY LED MANUA L TRANSMISSION REMOTE STA RTER User Guide WARNING It is the responsibility of the vehicle operator to ensure their vehicle is parked in a safe an d responsible manner.
User Guide P. 2 Table of Contents Introduction ............................................. 2 Using the Remote Control ...................... 3 Vehicle Presets ....................................... 3 Heater & Heated Se at ......................
User Guide P. 3 Using the Remote Control Your remote starter is equi pped with a 5-button mu lti-channel remote c ontrol. It can oper ate two independent v ehicles equi pped with a r emote starter (see Multi-car operation section on page 10).
P. 4 User Guide of vehicles coul d cause them to rem ain ON even after remot e starter shut down, res ulting in a dea d battery. Arming the Starter Kill The Starter Kill (i f installed) can be confi gured by the i nstaller so as to arm auto matically (P assive Mode) or not to ar m automatica lly (Active Mod e).
User Guide P. 5 Remote-starting Press the START/STOP button for approx . 1 second. The p arking lights will come ON to inform you that the Remote Car Starter has rec eived your signal . Approximately 5 seconds later, the engin e will start. The parking lights will rema in ON during the pr e-programmed run time of the e ngine.
P. 6 User Guide successively i nto the IGNITION ON / RUN and OFF position s. • The parking lights will flash three times to indic ate that the vehicle is now in Valet Mo de. The L.E.D. will come ON solid once the ignition key is remo ved. To take the system o u t o f Valet Mode: • Insert the ignition key into t he ignition sw itch.
User Guide P. 7 • Press the brake p edal. • Press the SHIFT button then pr ess and hold the START/STOP button for 3 s ec. (the parking lights will flash once) .
P. 8 User Guide Priority Door Access If the Remote Door Lo cks option is insta lled on your vehicle, this safety featu re allows you un l ock solely the driver’s door with a single pres s of the UNLOCK butto n on the transmit ter; upon a second press of the UNLOCK button, all the ot her doors will u nlock.
User Guide P. 9 • Turn the ignition k ey to the IGNITION ON (RUN) position. • Within 3 sec., pres s and release th e valet button , the parking lig hts will flash twic e the L.E.D. will turn itself off. Note : Once Valet Mode is ac tivated, the r emote starter will be disabled .
P. 10 User Guide • Flashing LED ON : the L.E.D. will fl ash at all times (eit her under active armin g or under passiv e arming) to indicat e that the start er kill is activ e. • Active Arming: the LED will flas h normally. • Passive Arming: the LED will not flas h during the coun tdown precedin g the activatio n of the Starter Kill.
User Guide P. 11 Your installe r can customize th e system as to p ersona lize th ese multi-level featu res in an order that best suits you. Yo ur options are: Option 1: Level 1 (requires pressing the.
P. 12 User Guide Status Request When the Engine IS NOT Running STATUS SEQUENCE LED #1 LED #2 LED #3 LED #4 Beep(s) Lock 3 flashes X X X 1 Unlock X 3 flashes X X 2 1 st sequence if locked 3 flashes X X.
User Guide P. 13 Status Request When the Engine is Running When the vehicle doors are loc ked: The LED # 1 will flash 3 times to denote that the vehicle’ s doors are locked. When the vehicle doors are unl ocked: The LED # 2 will flash 3 times to denote that the vehicle’s doors are unlocked.
P. 14 User Guide Diagnostics – Parking Light Flash Table Flashes Description 1 • Doors locked, star ter kill armed. • Run time has exp ired. • TRUNK button pressed. • Start signal receiv ed by the mo dule. • Cold weather mode cancel led. 2 • Remote start atte mpt cancelled by remote.
Ein wichtiger Punkt beim Kauf des Geräts Autostart Two-Way Led Transmission Remote Starter (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Autostart Two-Way Led Transmission Remote Starter noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Autostart Two-Way Led Transmission Remote Starter - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Autostart Two-Way Led Transmission Remote Starter reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Autostart Two-Way Led Transmission Remote Starter erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Autostart Two-Way Led Transmission Remote Starter besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Autostart Two-Way Led Transmission Remote Starter verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Autostart Two-Way Led Transmission Remote Starter. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Autostart Two-Way Led Transmission Remote Starter gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.