Benutzeranleitung / Produktwartung HW-C900-XAA des Produzenten Samsung
Zur Seite of 70
AV Receiver System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register HW-C900 - HW-C900-XAA_0831.indd 1 - HW-C900-XAA_0831.
2 Safety information SAFETY WARNINGS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3 ENG IMPORTANT SAFETY INSTRUCTIONS This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
4 PRECAUTIONS Safety information Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches).
5 ENG Features ACCESSORIES INPUT SELECT TV SOURCE POWER AMP/TV MAIN/ ZONE2 SLEEP DIMMER NEO:6 PROLOGIC AUDIO ASSIGN BD/DVD TUNER MEMORY SUB WOOFER MO/ST MUTE ASC iPod VOL TUNING / CH SETUP/MENU RETURN.
6 Contents SAFETY INFORMATION 2 2 Safety Warnings 3 Important Safety Instructions 4 Precautions FEATURES 5 5 Accessories DESCRIPTION 8 8 Front Panel 10 Rear Panel 12 Display 13 Insert Remote Control B.
7 ENG ● CONTENTS SETUP 37 37 Setup Menu Tree 41 Setting the Speaker Size 42 Connection setting for surround BACK 43 Setting the Speaker Listening Distance 44 Setting the Speaker Level 45 Setting the.
8 Description FRONT PANEL 1 INPUT SELECT CONTROL Used to select a source. (FM BD/DVD SAT TV VCR CD AUX1 AUX2 7.1 MULTI CH IPOD AUDIO IPOD VIDEO). 2 AUDIO ASSIGN BUTTON Toggles to select an input mode for the selected source.
9 ENG ● DESCRIPTION 11 S.DIRECT BUTTON Used to select the S.DIRECT mode. (Output the original signal as it is without applying the sound fi eld effect or any other sound effect. 12 MASTER VOLUME CONTROL Adjusts the volume level. 13 POWER Turns the receiver on/off.
10 Description REAR PANEL 1 3 5 6 7 19 20 8 9 10 2 4 15 11 16 17 12 13 14 18 - HW-C900-XAA_0831.indd 10 - HW-C900-XAA_0831.indd 10 2010-08-31 6:21:37 2010-08-31 6:21:37.
11 ENG ● DESCRIPTION 1 OPTICAL IN JACKS (DIGITAL AUDIO IN) Receives the digital optical audio signal. 2 COAXIAL IN JACK (DIGITAL AUDIO IN) Receives the digital coaxial audio signal. 3 COMPONENT VIDEO IN JACKS Receives the component video signal. 4 COMPONENT VIDEO OUT JACKS Outputs the component video signal.
12 Description DISPLAY 1 SPEAKER INDICATORS Displays the connected speakers. 2 LISTENING MODE INDICATORS Displays the current listening mode. 3 TUNING INDICATORS Displays the status of the current radio broadcast. 4 AUDIO INPUT INDICATORS Displays the audio input signal type of the currently connected external audio source.
13 ENG ● DESCRIPTION INSERT REMOTE CONTROL BATTERIES * Batteries (AAA size) Follow these precautions to avoid leaking or cracking cells: Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–). Assuming typical TV usage, the batteries last for about one year.
14 Description TOUR OF THE REMOTE CONTROL INPUT SELECT TV SOURCE POWER AMP/TV MAIN/ ZONE2 SLEEP DIMMER NEO:6 PROLOGIC AUDIO ASSIGN BD/DVD TUNER MEMORY SUB WOOFER MO/ST MUTE ASC iPod VOL TUNING / CH SE.
15 ENG ● DESCRIPTION 1 POWER BUTTON Turns the receiver on/off. 2 AMP/TV BUTTON Used to select the AMP/TV mode. - If you select the AMP mode, the button will fl ash orange. - If you select the TV mode, the button will fl ash green. 3 NUMBER BUTTONS Used to select a TV channel.
16 Connections SPEAKER POSITIONING There are two methods for positioning the speakers. When using Dolby Pro Logic IIz, place the Surround Back Speakers in the FHL, FHR position and connect them to SURROUND BACK/ FRONT HEIGHT Jack. Position of AV Receiver Place the AV Receiver on a dedicated stand or rack.
17 ENG ● CONNECTIONS Surround Speakers Place these speakers behind your listening position. If there isn't enough room, place these speakers so they face each other. Place them about 2 to 3 feet (60 to 90cm) above your ears, facing slightly downward.
18 Connections CONNECTING THE SPEAKERS Connecting Speaker Wire Loosen the knob by turning counterclockwise. Insert the bare part of the wire into the hole in the side of each terminal.
19 ENG ● CONNECTIONS CONNECTING THE Bi-AMP SPEAKER Connect the tweeter (high range) port and woofer (low range) to the front port and surround back speaker port respectively as appropriate. Then, you can use the bi-amplifi cation feature that supports enriched high range and base tones.
20 Connections ZONE 2 In addition to your main listening room, you can also enjoy playback in the other room (Zone 2). You can simultaneously play back the same source in both the Main Zone and Zone 2. You can also play back the separate sources in the Main Zone and Zone 2.
21 ENG ● CONNECTIONS 1. Connecting the speakers directly to the main unit (Powered ZONE2) This setup allows 5.1-channel playback in your main room and 2-channel stereo playback in Zone 2, with a different source in each room. Connect your Zone 2 speakers to the AV receiver’s Surround Back Speaker terminals.
22 CONNECTING EXTERNAL DEVICES/YOUR TV VIA HDMI HDMI is a digital standard interface for connection to such devices as a TV, projector, DVD player, Blu-ray player, set-top box and more. HDMI removes any loss of signal from analog conversion, enabling you to enjoy video and audio sound quality as it was originally created in the digital source.
23 ENG ● CONNECTIONS HDMI FUNCTION Using Anynet+(HDMI-CEC) Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet + can be used by connecting this AV Receiver to a SAMSUNG TV using an HDMI Cable.
24 CONNECTING TO YOUR TV Video Connection If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the Component Video Output (P R , P B and Y) jacks on the back of your AV Receiver to the Component Video Input jacks on your TV.
25 ENG ● CONNECTIONS CONNECTING A DVD OR BD(Blu-ray) PLAYER Video Connection Connect a Component video cable(not supplied) from the COMPONENT IN (BD/DVD) (P R , P B and Y) jacks on the back of your AV Receiver to the Component Video Output jacks on your DVD/BD player.
26 CONNECTING A CABLE, SATELLITE OR SET-TOP BOX Video Connection Connect a Component video cable(not supplied) from the COMPONENT IN (SAT) (P R , P B and Y) jacks on the back of your AV Receiver to the Component Video Output jacks on your SAT.
27 ENG ● CONNECTIONS CONNECTING A VCR Video Connection For playback Connect a Video cable from the VIDEO IN (VCR) jack on the back of your AV Receiver to the Video Output jack on your VCR. For recording Connect a Video cable from the VIDEO OUT (VCR) jack on the back of your AV Receiver to the Video Input jack on your VCR.
28 Connections CONNECTING A CD PLAYER Audio Connection Connect the Digital Input (COAXIAL, OPTICAL1~3) on your AV Receiver to the Digital Output of the CD Player.
29 ENG ● CONNECTIONS CONNECTING 7.1 CHANNEL DEVICES You can connect the AV receiver to a DVD player, SUPER AUDIO CD player or other device with 7.1 channel output.
30 Connections CONNECTING AN iPod You can listen to audio from an iPod through the main unit. For iPod operation with your receiver, see this page and pages 58 ~ 59. Connect the iPod dock connector to the iPod jack on your reciever. Place the iPod in the Dock.
31 ENG ● CONNECTIONS CONNECTING AN iPod (Continued) iPod models that are compatible with HW-C900 iPod nano 1st generation 1GB 2GB 4GB iPod nano 2nd generation (aluminum) 1GB 2GB 4GB iPod nano 3rd ge.
32 Connections CONNECTING THE FM ANTENNA Connect the FM antenna supplied to the FM ANTENNA terminal as a temporary measure. Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it to a wall or other rigid surface.
33 ENG ● BASIC FUNCTIONS OF YOUR AV RECEIVER BEFORE USING THE AV RECEIVER Turning On/Off Connect the power plug to the outlet. This unit will set to Standby mode. Press the POWER button on the main unit for 2 seconds. This unit will be turned on. You can also turn the unit on/off by pressing the POWER button on the remote control.
34 Basic functions of your AV Receiver BASICS OF ZONE2 (Continued) Using the ZONE 2 controls Operation This Unit Remote Control Unit Display & Indicator Main On POWER POWER Zone 2 Mode MULTI ZONE MAIN/ ZONE2 MAIN/ZONE2 Zone 2 Power On POWER POWER Function (Turn on ZONE2 to display “Z” next to the display of the input source.
35 ENG ● BASIC FUNCTIONS OF YOUR AV RECEIVER AUDIO SETUP Selecting a source device and connection jack (Digital Audio In) Select the external devices you have connected to the receiver. Press the SETUP/MENU button on the remote control. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF .
36 Basic functions of your AV Receiver SELECTING DIGITAL/(HDMI)/ANALOG You can listen to sound in 2 channel analog , Dolby Digital or DTS using this unit. Press the INPUT SELECT button to select a desired function (BD/DVD, SAT,TV, CD, AUX). See page 33.
37 ENG ● SETUP For your convenience, you can set this AV receiver's features for the best use. SETUP MENU TREE Here’s a quick look at how the setup menus are organized on your AV Receiver.
38 Setup 1 ~ 30 FT (1 foot steps) , default : 10 FT CEN S.L F.L F.R S.R SBL/FHL AUDIO SETUP SPK SIZE SPK DISTANCE TEST TONE SETUP MENU TREE (Continued) SBR/FHR S.
39 ENG ● SETUP SETUP MENU TREE (Continued) 0~7 OFF -7 ~ 0 ~ +7 ON DPLIIX SETUP TEST TONE TONE CONTROL OFF ON C- WIDTH PANORAMA DIMENSION TONE 0~5 C-IMAGE NEO:6 SETUP BASS TREBLE -6dB ~ +6dB (1dB Step) -6dB ~ +6dB (1dB Step) AUTO OFF ON EX/ES SETUP A/V SYNC SYNC OFF ~ SYNC 240MS (10MS Step) - HW-C900-XAA_0831.
40 Setup SETUP MENU TREE (Continued) MP3 ENHANCER SMART VOLUME ASC SETUP OFF ON OFF ON MAX DRC SETUP SYNC AUDIO HDMI SETUP AVR TV ON OFF OFF ON VARIABLE SET START EQ ON / EQ OFF DUAL MONO CH1 OFF ON AUTO VIDEO CONV.
41 ENG ● SETUP SETTING THE SPEAKER SIZE Signal outputs and frequency response from the speaker will be adjusted according to your speaker confi guration and whether certain speakers are used or not. Press the SETUP/MENU button on the remote control.
42 Setup CONNECTION SETTING FOR SURROUND BACK Settings for the surround back speaker differ depending on the connection method and installation site of the speaker to be connected. You must confi gure the SB SETUP settings according to the connected speaker before you listen to music properly.
43 ENG ● SETUP SETTING THE SPEAKER LISTENING DISTANCE If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and surround speakers. Press the SETUP/MENU button on the remote control.
44 Setup SETTING THE SPEAKER LEVEL You can set the balance and level of speakers. Press the SETUP/MENU button on the remote control. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF . Press the ENTER button to select SETUP ENTER .
45 ENG ● SETUP SETTING THE TEST TONE Use the test tone to check the speaker connection status or level. Press the SETUP/MENU button on the remote control. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF . Press the ENTER button to select SETUP ENTER .
46 Setup SETTING DOLBY PRO LOGIC MODE This mode provides up to 7.1 channel sound from 2 channel sources, or provides 7.1 channel sound from 5.1 channel sources for music or movie mode. Press the PROLOGIC button on the remote control. MOVIE : Adds realism to the movie soundtrack.
47 ENG ● SETUP SETTING TONE CONTROL This will enable you to adjust the bass and treble level. Press the SETUP/MENU button on the remote control. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF . Press the ENTER button to select SETUP ENTER .
48 Setup SETTING EX/ES MODE When surround back speakers are connected, you can listen to 7.1 multi-channel sound using the built-in Dolby Digital Surround EX or DTS ES decoder. This function works when a Dolby Digital or DTS source (such as a DVD player) is input, and does not work with L.
49 ENG ● SETUP MP3 ENHANCER This also helps enhance your sound experience (ex. mp3 music). Use this if you want to hear better sound from a low quality mp3 source. Press the SETUP/MENU button on the remote control. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF .
50 Setup ASC (AUTO SOUND CALIBRATION) SETUP By setting the ASC function just once when you relocate or install the unit, you can have the unit automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 7.
51 ENG ● SETUP DRC SETUP You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.DRC compresses the audio to make the loudest sounds quieter and the quietest sounds louder. Press the SETUP/MENU button on the remote control.
52 Setup HDMI SETUP Use this if you want to receive audio from HDMI connected external devices. Press the SETUP/MENU button on the remote control. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF . Press the ENTER button to select SETUP ENTER .
53 ENG ● SETUP VIDEO CONV. (Video Conversion) You can convert the incoming composite or component video signal into a maximum quality of the connected TV if you output the converted video via HDMI OUT. Press the SETUP/MENU button on the remote control.
54 Setup ZONE2 SETUP You can use the remote control or the master volume of the main unit to adjust the volume of ZONE2. Press the SETUP/MENU button on the remote control. Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF .
55 ENG ● OPERATION USING THE SURROUND MODES Using the AUDIO EFFECT button on the front of the main unit Selecting the DPLIIx mode Press the AUDIO EFFECT button to select DPLIIX . Each time you press this button, DPLIIX NEO:6 SFE will be selected in turn.
56 Operation USING THE SURROUND MODES (Continued) Input Signal and Surround Chart o = active, – = inactive Input Signal Surround Mode Output Channel Display Information L/R C SL SR SBL SBR SUBW Sign.
57 ENG ● OPERATION LISTENING TO THE RADIO You can listen to the radio by using either automatic or manual tuning. Press the INPUT SELECT button to select FM . Select a frequency (radio broadcast). Preset tuning : Press the # , $ buttons on the remote control to select the preset frequency.
58 Operation USING AN iPod You can enjoy playback of your iPod using the supplied remote control. Listening to Music (iPod audio function) You can play music fi les stored in the iPod player by connecting it to the AV receiver. Connect the iPod dock connector to the iPod jack on the AV Receiver.
59 ENG ● OPERATION USING AN iPod (Continued) Watching a Movie (iPod Video function) You can play video fi les stored in the iPod player on a TV by connecting it to the AV receiver. Connect the iPod dock connector to the iPod jack on the AV receiver.
60 Operation CONVENIENT FUNCTIONS Sleep timer function You can set the time that this unit will shut itself off. Press the SLEEP button. SLEEP : OFF 15 30 45 60 90 120 MIN will be selected in turn. To check sleep timer Press the SLEEP button.
61 ENG ● OPERATION Reset function When the Power is on, Press the MUTE button. MUTE appears on the display. Press the 2 button fi ve times and then press the ENTER button. INITIAL : NO appears on the display. Press the ▲▼ buttons to select YES .
62 Miscellaneous OPERATING YOUR TV WITH THE REMOTE CONTROL Press the POWER button to turn on the TV. Press the AMP/TV button to set the remote to TV mode. If you select the AMP mode, the button will fl ash orange. If you select the TV mode, the button will fl ash green.
63 ENG ● MISCELLANEOUS TV Brand Code List Brand Code Number Brand Code Number Brand Code Number Admiral (M.Wards) 056, 057, 058 Luxman 018 Sylvania 018, 040, 048, 054, 059, 060, 062 A Mark 001, 015 .
64 Miscellaneous OPERATING YOUR DVD OR BD PLAYER WITH THE REMOTE CONTROL Press the POWER button to turn on the DVD (BD) player. Press the BD/DVD button on the remote control to set the remote to DVD (BD) mode. Point the remote control toward the DVD (BD).
65 ENG ● TROUBLESHOOTING Before requesting service, please check the following. Symptom Check Remedy The unit will not turn on. • Is the power cord plugged into the outlet? • Connect the power plug to the outlet. A function does not work when the button is pressed.
66 Troubleshooting Symptom Check Remedy Can't select Dolby Pro Logic llx mode. • Is the input signal selected properly? • Only 2 channel signal can select Dolby Pro Logic IIx mode. (ex:Dolby Digital, PCM, 2 channel analog input signal.) Can't select NEO:6 mode.
67 ENG ● APPENDIX Appendix SPECIFICATIONS GENERAL Power supply 120V, 60 Hz Standby power consumption 0.9W Power consumption 75W Weight 12.3 Ibs Dimensions (W x H x D) 17 x 6.5 x 14.2 inches Operating temperature range 41°F~+95°F Operating humidity range 10%~75% FM TUNER Frequency response 87.
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAM.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Area Contact Center Web Site ` North America Canada 1-800-SAMSUNG (726-7864) www.samsung.com Mexico 01-800-SAMSUNG (726-7864) www.
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT WRITE IN THE US 1-800-SAMSUNG (7267864) www.samsung.com/us Samsung Electronics America, Inc. 105 Challenger Road Ridgefi eld Park, NJ 07660-0511 Code No. AH68-02312R - HW-C900-XAA_0831.
Ein wichtiger Punkt beim Kauf des Geräts Samsung HW-C900-XAA (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Samsung HW-C900-XAA noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Samsung HW-C900-XAA - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Samsung HW-C900-XAA reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Samsung HW-C900-XAA erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Samsung HW-C900-XAA besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Samsung HW-C900-XAA verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Samsung HW-C900-XAA. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Samsung HW-C900-XAA gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
