Benutzeranleitung / Produktwartung HT-P10 des Produzenten Samsung
Zur Seite of 62
DIGIT AL HOME CINEMA SYSTEM HT -P10 Instruction Manual V I D E O COMPACT DIGITAL AUDIO COMPACT DIGITAL VIDEO 1p~30p(P10)-GB 2/1/05 10:44 AM Page 3.
1 Safety W arnings Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIA TION WHEN OPEN AND INTERLOCKS DEFEA TED, A VOID EXPO- SURE TO BEAM.
GB 2 Precautions Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally , on a suitable base (furniture), with enough space around it for ventilation (3~4inches).
3 Multi-Disc Playback & FM T uner The HT -P10 combines the convenience of multi-disc playback capability , including DVD, VCD, CD, MP3-CD, CD-R/RW , and DVD-R/RW , with a sophisticated FM tuner , all in a single player .
4 PREP ARA TION PREP ARA TION Safety W arnings ..................................................................................................................................................................1 Precautions ............................
DVD (Digital V ersatile Disc) of fers fantastic audio and video, thanks to Dolby Digital surround sound and MPEG-2 video compression technology . Now you can enjoy these realistic effects in the home, as if you were in a movie theater or concert hall.
GB CD-R Discs • Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the condition of the disc. • Use a 650MB/74 minute CD-R disc. Do not use CD-R disk over 700MB/80 minute as much as possible since it may not be played back.
—Front Panel— 7 Power ( ) button Standby indicator Disc T ray V olume buttons T uning Down & Skip ( ) buttons T uning Up & Skip ( ) buttons Stop ( ) button Play/Pause ( ) button Open/Close.
GB —Rear Panel— V ideo Cable Remote Control FM Antenna User's Manual 8 FM Antenna Connector 5.1 Channel Speaker Output T erminals V ideo Output Connector Connect the TV's video input jacks (VIDEO IN) to the VIDEO OUT connector . Accessories SCART JACK Connect to a TV with scart input jack.
PL II MODE button VOLUME button MENU button TV , DVD POWER button SLEEP button STEP button MUTE button DSP/EQ button RETURN button Number(0~9) buttons VIDEO SEL.
GB 10 Insert Remote Batteries The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor .
RS LS C L SW R Rear Speakers • Place these speakers behind your listening position. • If there isn't enough room, place these speakers to face each other . • Place them about 60 to 90cm (2 to 3feet) above your ear , facing slightly downward.
GB Rear Speaker (L) Front Speaker (L) Rear Speaker (R) Front Speaker (R) Subwoofer Center Speaker Press and hold the terminal tab. Insert the speaker cord. Release the finger . 1 2 3 12 CONNECTIONS 12 3 Red Black • Connect the red cord to the red (+) terminal and the black cord to the black (-) terminal.
13 METHOD 2 Scart ............... Better Quality If you television is equipped with an SCART input, connect an Scart Jack (not supplied) from the AV OUT jack on the back panel of the system to the SCART IN jack on your television. METHOD 1 Composite Video .
GB CONNECTIONS Press STOP button. • When disc is played back, press the STOP button twice so that “ STOP ”, appears on the display . Press and hold P .
15 Press AUX on the remote control to select AUX. • Y ou can also use the FUNCTION button on the main unit. The mode switches as follows: DVD/CD ➝ AUX ➝ FM . Connect Audio In on the DVD player to Audio Out on the external analog component. • Be sure to match connector colors.
GB 16 CONNECTIONS The cooling fan supplies cool air to the unit to prevent overheating. Please observe the following cautions for your safety . • Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise and may damage it.
17 2 Load a disc. • Depending on the content of the disc, the initial screen may appear different. 1 Press OPEN/ CLOSE button to open the disc tray . 3 Press OPEN/ CLOSE button to close the disc tray . • Place a disc gently into the tray with the disc’s label facing up.
GB 18 OPERA TION MP3 • Depending on the recording mode, some MP3-CDs may not play . • T able of contents of a MP3-CD varies depending on the MP3 track format recorded on the disc. • MP3 file support: MPEG1 LA YER3 (BITRA TE : 128KBPS~320KBPS , SAMPLEING FREQ.
19 DivX Playback Fast playback Skip Forward/Back During playback, press the button. • Go to the next file whenever you press button, if there are over 2 files in the disk. • Go to the previous file whenever you press button, if there are over 2 files in the disk.
GB 20 OPERA TION • " " is displayed when there is one supported audio item in the disc. Note Format A VI WMA Surpported V ersions DivX3.1 1 ~ 5.1 V1/V2/V3/V7 Press the SUBTITLE button. • Each time you press the button, your selection will toggle between “ SUBTITLE ON ” (1/1, 1/2 .
21 Images captured with a digital camera or camcorder , or JPEG files on a PC can be stored on a CD and then played back with this DVD player . JPEG File Playback JPEG Press the OPEN/CLOSE button to open the disc tray , and then load the JPEG disc.
GB 22 OPERA TION Press INFO button. • Each time the button is pressed, the display changes as follows: Press the REMAIN button. • For checking the total and remaining time of a title or chapter being played.
23 Fast Playback DVD VCD MP3 CD Press and hold . • Each time the button is held down during playback, the playback speed changes as follows: Press SLOW button. • Each time the button is pressed during playback, the playback speed changes as follows: Slow Playback DVD VCD DivX • Reverse slow playback does not work with VCD and DivX.
GB 24 OPERA TION Press REPEA T button. • Each time the button is pressed during playback, the repeat playback mode changes as follows: MP3 JPEG CHAPTER Repeatedly plays the selected chapter . TITLE Repeatedly plays the selected title. RANDOM Plays tracks in random order .
• The A-B Repeat function will not work on an MP3 or JPEG disc. 2 Press Cursor button to move to REPEA T PLA YBACK ( ) display . • For a VCD or CD, press INFO button once. 1 Press INFO button twice. A - A - ? REPEA T : A— A - B REPEA T : A—B • The specified segment will be played repeatedly .
GB 26 OPERA TION DVD 2 Press Cursor button to move to ANGLE ( ) display . Press INFO button. 1/3 • Each time the button is pressed, the angle changes as follows: 3 Press Cursor , or numeric buttons to select the desired angle. 2/3 3/3 1/3 1/3 • The Angle function works only with discs on which multiple angles have been recorded.
DVD VCD DVD 2 Press Cursor , , , buttons to move to the area you want to enlarge. 1 Press ZOOM button. • Each time the button is pressed, the zoom level changes as follows: 3 Press ENTER button. Press EZ VIEW button. • Each time the button is pressed, the zoom function will switch between On and Off.
GB 28 OPERA TION • Depending on the number of languages on a DVD disc, a different audio language (ENGLISH, SP ANISH, FRENCH, etc.) is selected each time the button is pressed. 2 Press Cursor , buttons or numeric buttons to select the desired audio language.
• The selected file will be played. • An MP3 or JPEG disc cannot be moved from the disc information screen. • When playing an MP3 or JPEG disc, you cannot use , to move a folder .
GB 30 OPERA TION 2 Press Cursor , button to move to ‘T itle Menu’. DVD 1 In Stop mode, press MENU button. 3 Press ENTER button. • The title menu appears.
OSD (On-Screen Display) language is set to English by default. Setting the Language 31 2 1 In Stop mode, press MENU button. Press Cursor button to move to ‘ Setup ’ and then press ENTER button. • To select other language, select OTHER and enter the language code of your country.
GB 32 4 • Once the setup is complete, if the language was set to English, OSD will be displayed in English. 3 Select ‘ Language ’ and then press ENTER button 5 Press Cursor , button to select ‘ OSD Language ’ and then press ENTER button. Press Cursor , button to select the desired language and then press ENTER button.
33 2 1 4 3 In Stop mode, press MENU button. Press Cursor button to move to ‘Setup’ and then press ENTER button. • Once the setup is complete, you will be taken to the previous screen. Press Cursor button to move to ‘TV DISPLA Y’ and then press ENTER button.
GB 34 SETUP The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different screen size, you should adjust the aspect ratio to fit your TV or monitor.
• This function works only if a DVD disc contains the rating level information. Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 4 • The password is set to "7890" by default. • Once the setup is complete, you will be taken to the previous screen.
GB 36 SETUP 4 • Enter the old password, a new password, and confirm new password. • The setting is complete. 3 5 Press Cursor button to move to ‘P ASSWORD’ and then press ENTER button. Press ENTER button. Enter the password and then press ENTER button.
37 DVD VCD JPEG • “ COPY LOGO DATA ” will be displayed on the TV screen. • The selected wallpaper will be displayed. 2 1 3 During playback, press PLA Y/P AUSE button when an image you like appears. Press LOGO button. The power will turn off and then back on.
GB 38 SETUP 2 1 3 In Stop mode, press MENU button. Press Cursor button to move to ‘Setup’ and then press ENTER button. Press Cursor button to move to ‘LOGO’ and then press ENTER button. To Change the W allpaper 5 4 Press MENU button to exit the setup screen.
39 SMALL : Select this when using the speakers. NONE : Select this when no speakers are installed. • Depending on PRO LOGIC and STEREO, the speaker mode may vary. Note Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not.
GB L: Front Speaker (L) C: Center Speaker SW: Subwoofer R: Front Speaker (R) LS: Rear Speaker (L) RS: Rear Speaker (R) Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 40 SETUP 2 1 In Stop mode, press MENU button.
41 Setting up the Speaker Delay Time When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same.
GB 42 Df: The distance from FRONT SPEAKER Dc: The distance from CENTER SPEAKER Ds: The distance from SURROUND SPEAKER Ideal CENTER SPEAKER placement It is desirable to place all speakers within this circle. Ideal SURROUND SPEAKER placement SETUP • You can set the delay time for C between 00 and 05mSEC and for LS and RS between 00 and 15mSEC.
43 Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 2 1 4 3 In Stop mode, press MENU button. Press Cursor button to move to ‘Audio’ and then press ENTER button. Press Cursor button to move to ‘SOUND EDIT’ and then press ENTER button.
GB • The adjustments will appear on the main unit's display, not on your TV screen. Adjusting Front/Rear Speaker Balance • You can select between 00 and –06 and OFF. • The volume decreases as you move closer to –6. Adjusting Center/Rear/Subwoofer Speaker Level • The volume level can be adjusted in steps from +6dB to –6dB.
45 12 In Stop mode, press MENU button. Press Cursor button to move to ‘Audio’ and then press ENTER button. • The Cursor button is pressed, the greater the effect, and the Cursor button is pressed, the smaller the effect. 34 Press Cursor button to move to ‘DRC’ and then press ENTER button.
GB 46 SETUP Video may look slower than the audio if it is connected with digital TV. In this case, adjust the delay time of audio to optimal status to fit the video. AV SYNC Setup Press RETURN button to return to the previous level. Press MENU button to exit the setup screen.
47 Press PL II MODE button. PRO LOGIC II • MUSIC: When listening to music, you can experience sound effects as if you are listening to the actual performance.
GB 48 SETUP 12 • You can select between 0 and 7. • You can select between 0 and 6. 34 • PANORAMA: This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging. • CENTER WIDTH: Sound is output to the center speaker only.
49 • "DSP" appears on the display panel. • Each time the button is pressed, the selection changes as follows: POP, JAZZ, ROCK: Depending on the genre of music, you can select from POP, JAZZ, and ROCK. STUDIO : Provides a sense of presence as if in a studio.
GB 50 • "SLEEP" will be displayed. Each time the button is pressed the preset time changes as follows: 1 0 ➝ 20 ➝ 30 ➝ 60 ➝ 90 ➝ 120 ➝ 150 ➝ OFF . TITLE CHAP PRGM RDS RT ST TUNED kHz MHz Press SLEEP button. You can set the time that the DVD player will shut itself off.
51 2 1 • The selection toggles back and forth between "FM" each time the TUNER button is pressed. T une in to the desired station. Press TUNER button. Automatic T uning 2 Manual T uning 2 1 Select a broadcast station. Press the STOP ( ) button to select PRESET and then press button to select the preset station.
GB 52 RADIO OPERA TION To tune in to a preset station, press on the remote control to select a channel. • Refer to Step 2 on page 51 to automatically or manually tune in to a station. 2 1 • Each time the button is pressed, the band switches between " FM ".
53 • RDS may not operate correctly if the station tuned is not transmitting RDS signal properly or if the signal strength is weak. • If searching finishes at once,“ PS ”,and “ RT ” will not appear on the display.
GB 54 PTY (Program T ype) indication and PTY -SEARCH function To search for a program using the PTY codes Before you start, remember... • The PTY Search is only applicable to preset stations. • To stop searching any time during the process, press PTY SEARCH while searching.
• Each time the button is press, the brightness changes as follows: DARK ➞ BRIGHT . TITLE CHAP PRGM RDS RT ST TUNED kHz MHz You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing. Press DIMMER button.
GB 56 MISCELLANEOUS Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface. Do not stick paper or tape on the disc. Do not keep in direct sunlight Keep in a cool ventilated area Keep in a clean Protection jacket.
57 • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. • Check the region number of the DVD. DVD discs purchased from abroad may not be playable. • CD-ROMs and DVD-ROMs cannot be played on this DVD player.
GB 58 • Is the TV power on? • Are the video cables connected properly? • Is the disc dirty or damaged? • A poorly manufactured disc may not be playable. • Disc is rotating but no picture is produced. • Picture quality is poor and picture is shaking.
Code Language Code Language Code Language Code Language 1027 Afar 1181 Frisian 1334 Latvian, Lettish 1506 Slovenian 1028 Abkhazian 1183 Irish 1345 Malagasy 1507 Samoan 1032 Afrikaans 1186 Scots Gaelic.
GB 60 MISCELLANEOUS Impedance Frequency range Output sound pressure level Rated input Maximum input Dimensions (W x H x D) Weights S P E A K E R 5.1ch speaker system Front/Rear speaker 4 Ω x 4 150Hz~20kHz 85dB/W/M 32W 64W 90 x 107 x 95 mm 0.36 Kg / 0.
AH68-01660B THIS APPLIANCE IS MANUF ACTURED BY : 1p~30p(P10)-GB 2/1/05 10:44 AM Page 2.
Ein wichtiger Punkt beim Kauf des Geräts Samsung HT-P10 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Samsung HT-P10 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Samsung HT-P10 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Samsung HT-P10 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Samsung HT-P10 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Samsung HT-P10 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Samsung HT-P10 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Samsung HT-P10. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Samsung HT-P10 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
