Benutzeranleitung / Produktwartung DVD-VR329 des Produzenten Samsung
Zur Seite of 99
Instruction Manual DVD-VR329 www .samsung.com AK68-01 172A-00 English 01172A(00)-VR329_XAA-Eng1 2006.5.25 11:17 AM Page 1.
G etting Started 2- English W arning TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE P ARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SER VICE PERSONNEL. This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury .
G etting Started English - 3 Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below . Keep these operating instructions handy for future refer- ence. 1) Read these instructions.
G etting Started • Only JPEG files with the ".jpg", ".JPG" extension can be used. • The unit can handle a maximum of 1000 files and folders. • Maximum size of progressive JPEG is 3M pixels. • MOTION JPEG is not supported. • DVD-RAM/± RW/± R discs that contain JPEG files can be played back.
G etting Started English - 5 • In both modes, playback can be performed before and after finalization, but additional recording, deleting and editing can not be performed after finalization. • If you want to record the disc in VR Mode and then record in V Mode, be sure to execute format.
G etting Started 6- English Contents Getting Started Getting Started W arning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Important Safety Instructions .
G etting Started English - 7 About ANYKEY . . . . . . . . . . . . . . . . . . . . . . . . . . .45 Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . .46 Selecting the Subtitle & Audio Language . . . . . . . .47 Changing the Camera Angle .
Icon T erm Definition This involves a function available DVD in DVD or DVD-R/DVD-RW(V)/+R discs that have been recorded and finalized. This involves a function available RAM in DVD-RAM. This involves a function available -RW in DVD-R W . This involves a function available -R in DVD-R.
G etting Started English - 9 How to use the DVD Recorder & VCR Step 1 Select the disc type Step 2 Format the disc to start recording This unit can record on the following types of discs. If you want to repeatedly record on the same disc or you want to edit the disc after recording, select a rewritable DVD± RW or DVD-RAM type disc.
G etting Started 10 - English Step 6 Finalizing & Playing on other DVD components T o play your DVD on other DVD players, finalizing may be necessary .
G etting Started English - 11 Front Panel 1 2 3 4 10 11 14 15 1. DVD DECK 2. DVD OPEN/CLOSE BUTTON 3. VCR DECK 4. VCR EJECT BUTT ON 5. POWER BUTTON 6. VIDEO INPUT JACK (A V 2 IN) 7. AUDIO L, R INPUT JACKS (A V 2 IN) 8. DV INPUT JACK 9. P .SCAN BUTTON 10.
G etting Started 12 - English Rear Panel 1. VIDEO INPUT JACK (A V 1 IN) 2. VIDEO OUT JACK (A V OUT) 3. AUDIO OUT JACKS (COMPONENT OUT) 4. S-VIDEO IN/OUT JACKS 5. ANT IN JACK 6. ANT OUT (TO TV) JACK 7. AUDIO INPUT JACKS (A V 1 IN) 8. AUDIO OUT JACKS (A V OUT) 9.
G etting Started English - 13 T our of the Remote Control 13. SUBTITLE Button Press this to switch the DVD ’ s subtitle language. 14. ANYKEY Button Press this to set the status of the disc that is being played. 15. REC Button Press this to make a recording on VCR, DVD-RAM/ ± RW/± R discs.
C onnections 14 - English C onnecting & S etting Up Quick Overview A Quick overview presented in this guide will give you enough information to start using the recorder .
C onnections English - 15 Step 1: Connecting the Antenna Cable There are several ways to connect your DVD Recorder & VCR. Select the antenna connection that best suits you below . Antenna + DVD Recorder & VCR + TV : No Cable box Y ou can record non-scrambled channels by selecting the channel on the DVD Recorder & VCR.
C onnections 16 - English Antenna + Cable box + DVD Recorder & VCR + TV : Cable box with many scrambled channels Y ou can record channels by selecting the channel on the cable box. Y ou cannot record one channel while watching another channel. Be sure that the cable box is turned on.
C onnections English - 17 Antenna + DVD Recorder & VCR + Cable box + TV : Cable box with a few scrambled channels Y ou can record non-scrambled channels by selecting the channel on the cable box. Y ou cannot record scrambled channels that require a cable box.
C onnections 18 - English Step 2 : Connecting the V ideo Cable There are several ways to connect your DVD Recorder & VCR. Select one of the video connections on the following pages. Y ou must use one of the following audio/video connections on this unit.
English - 19 C onnections ■ S-Video and Component video output are available only if your TV supports S-V ideo input or Component video input, respectively . If S-Video or Component video output does not work, check the TV connections and the TV input selection settings.
20 - English C onnections Component Cable (not supplied) COMPONENT P R P B Y green blue red green blue red Connecting to Component video input jacks (Y ,P B ,P R ) Connect Component video cables (not .
English - 21 C onnections Step 3 : Connecting the Audio Cable Select one of the Audio connections on the following pages. INPUT AUDIO R L Red White VIDEO Y ellow Audio/Video Cable Connecting to your TV This connection will use your TV ’ s speakers. 01172A(00)-VR329_XAA-Eng1 2006.
22 - English C onnections Audio/Video Cable INPUT ANALOG AUDIO RL Red White Connecting to a stereo amplifier with analog input jacks If your stereo amplifier only has AUDIO INPUT jacks(L and R), use the AUDIO OUT jacks. Front(L)speaker Front(R)speaker 01172A(00)-VR329_XAA-Eng1 2006.
English - 23 C onnections Optical Cable (not supplied) Coaxial Cable (not supplied) INPUT Digital Audio or A V amplifier Connecting to an A V amplifier with a digital input jack If your A V amplifier has a Dolby Digital or DTS decoder and a digital input jack, use this connection.
24 - English C onnections Step 4 : Connecting External Devices This allows you to connect your DVD Recorder & VCR to other external devices and view or record their outputs.
English - 25 C onnections Audio/Video Cable Camcorder AUDIO VIDEO R L OUTPUT Connecting a Camcorder to the A V 2 IN jacks Y ou can also use the A V 2 IN jacks on the front panel of the DVD Recorder & VCR. Y ou can record from connected equipment, such as a camcorder .
26 - English C onnections DV OUT DV Cable (not supplied) Camcorder Connecting a Camcorder to the DV IN jack If your camcorder has a DV output jack, connect it to the DV input jack of your DVD Recorder & VCR. ■ If the input is not selected automatically , use INPUT SEL.
English - 27 C onnections After all connections are complete, plug the power cord in the wall outlet. “ Auto ” appears in the front panel display . This means that the current time is being set automati- cally through the antenna under connection(Auto Program).
28 - English C onnections T o determine whether your television is compatible, follow the instructions below . 1. Switch your television on. 2. Point the remote control towards the television.
English - 29 S ystem Setup S ystem Setup On-Screen Menu Navigation The on-screen menus allow you to enable or disable various functions on your DVD Recorder & VCR. Use the following buttons to open and navigate through the on-screen menus. 1 MENU Button Press this button on the remote control to open the on-screen MENU .
S ystem Setup Auto Clock Set This menu is used to set the current time. Y ou need to set the time to use timer recording. 1 With the unit in Stop mode/No Disc mode, press the MENU button. 2 Press the …† buttons to select Setup , then press the ENTER or √ button.
English - 31 S ystem Setup 3 Press the …† buttons to select Clock Set , then press the ENTER or √ button. 4 Press the …† buttons to select Manual Clock Set , then press the ENTER or √ button. 5 Press the …†œ √ buttons to select the Current Date and T ime, then press the ENTER button.
32 - English S ystem Setup Channel Set This feature allows you to manually set the DVD Recorder & VCR ’ s tuner band to Antenna or Cable, whichever you connected to the Antenna In jack during initial setup. • Use this setting only if Auto Setup detected the incorrect tuner band, i.
English - 33 S ystem Setup Channel Add/Delete 4 Press the …† buttons to select Channel Add/Delete , then press the ENTER or √ button. 5 Press the …† or number buttons to select the channels you want to add or delete on the Select channel screen.
34 - English S ystem Setup 3 Press the …† buttons to select Channel Set , then press ENTER or √ button. 4 Press the …† buttons to select RF Output Channel , then press the ENTER or √ button. 5 Press the …† buttons to select CH3 or CH4 , then press the ENTER or √ button.
English - 35 S ystem Setup Setting Up the Audio Options Allows you to setup the audio device and sound status settings depending on the audio system in use. 1 With the unit in Stop mode/No Disc mode, press the MENU button. 2 Press the …† buttons to select Setup, then press the ENTER or √ button.
36 - English S ystem Setup Setting Up the Display(V ideo) Options This function allows you to setup the TV screen settings. 1 With the unit in Stop mode/No Disc mode, press the MENU button. 2 Press the …† buttons to select Setup , then press the ENTER or √ button.
S ystem Setup Setting Up the Parental Control The Parental Control function works in conjunction with DVDs that have been assigned a rating - which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.
38 - English S ystem Setup VCR Setting This function allows you to setup the VCR. 1 With the unit in Stop mode/No Disc mode, press the MENU button. 2 Press the …† buttons to select Setup , then press the ENTER or √ button. 3 Press the …† buttons to select System , then press the ENTER or √ button.
English - 39 S ystem Setup 5 Press the …† buttons to select the desired VCR option, then press the ENTER or √ button. 6 Press the …† buttons to select the desired item, then press the ENTER or √ button. T ape Length This information is usually printed on the tape box.
40 - English S ystem Setup A DVD-Video consists of ‘ T itles ’ and ‘ Chapters ’ . When you record one program, it makes one T itle. If you use this function, the T itle will be divided into Chapters. 1 With the unit in Stop mode/No Disc mode, press the MENU button.
S ystem Setup 7 Press the REC button to start recording. The message "Do you want to create the chapter menu after this recording?" is displayed. 8 Press the œ√ buttons to select Ye s and press the ENTER button and recording begins. In XP and SP mode, you must record at least 5 minutes to create a chapter .
42 - English P layback P layback This section introduces basic functions of play- back by disc type. Before Playing Read the following information before playing a disc. Region code (DVD-Video only) Both the DVD Recorder & VCR and the discs are coded by region.
English - 43 P layback Playing a Disc This DVD Recorder & VCR can only operate with discs that are compatible with DVD-RAM Standard V ersion 2.0. Playback and/or recording may not work for some types of discs or when specific operations, such as angle change and aspect ratio adjustment, are being performed.
44 - English P layback Using the Search & Skip Functions Searching through a Chapter or T rack During the playback, press the SEARCH œœ or √√ button on the remote control. Each time you press the SEARCH button, the playback speed will change as follows.
English - 45 P layback Slow Motion Play/ Step Motion Play Slow Motion Play (DVD-VIDEO / DVD-RAM / DVD± R W / DVD± R) During pause mode, press the SEARCH œœ or √√ button on the remote control for more than 1 sec- ond.
P layback • If you want to move to a desired time to help you find a scene. 1 Press the ANYKEY button during playback. 2 Press the … … † † buttons to select Tim e . 3 Enter the time in the sequence of hours, minutes, and seconds using the number buttons, then press the ENTER button.
English - 47 P layback Selecting the Subtitle & Audio Language Selecting the SUBTITLE language Subtitle languages may not work depending on the disc type. This is only available during playback. Using the SUBTITLE button 1 Press the SUBTITLE button during playback.
48 - English P layback Using the ANGLE button 1 Press the ANGLE button, during playback. 2 Press the …† button to select the desired angle. Using the ANYKEY button 1 Press the ANYKEY button during playback. 2 Press the …† buttons to select Angle , then press the œ √ buttons or number (0~9) buttons to select the desired angle scene.
English - 49 P layback Playing back a Bookmark 1 Press the MARKER button. 2 Press the œ √ buttons to select a bookmarked scene. 3 Press the ENTER or √ ll button to start playing from the selected scene. Clearing a Bookmark 1 Press the MARKER button.
50 - English P layback Using the Markers 1 Press the MARKER button during playback. 2 Press the ENTER button when the desired scene appears. • The number 01 is displayed and the scene is memorized. 3 Press the œ √ button to move to the next position.
English - 51 P layback Buttons on the Remote Control used for CD playback 1. l œœ button: Returns to the beginning of the current track when pressed during playback. If pressed again, your DVD Recorder & VCR moves to and plays the previous track.
P layback Playing back an MP3 Disc Playing an MP3 Disc 1 Insert an MP3 disc into the disc tray . 2 Press the …† buttons to select the Disc Navigation , and then press the ENTER or √ button. 3 Press the …† buttons to select the Music , and then press the ENTER or √ button.
English - 53 P layback Play Option Mode 1 During Stop, Press the ANYKEY button. The Play option will be highlighted. 2 Press the œ √ buttons to select a desired Play Option, then press the ENTER button. • Normal: T racks on a disc are played in the order in which they were recorded on the disc.
P layback Y ou can register a maximum 30 tracks in the playlist. 1 In still mode, press the ANYKEY button. The Play option will be highlighted. 2 Press the œ √ buttons to select Playlist , then press the ENTER button.
English - 55 P layback 1 Insert a standard VHS tape into the VCR deck. • When a tape is inserted, power will turn on auto- matically . 2 Press the √ II ( PLA Y/P AUSE ) button on the remote control or on the front panel of the unit. The videotape will begin to play automatically if the Record Safety T ab is removed and Auto Play is turned on.
56 - English P layback While a videotape is playing, you can enjoy a variety of special playback features, including Still, Frame Advance, Skip, Slow motion, and more. Pause In Play mode, press √ II ( PLA Y/P AUSE )button to still a single frame. Frame Advance In Pause mode, press F .
English - 57 P layback 2 Press the …† buttons to select Forward Intro Scan or Reverse Intro Scan , then press the ENTER button. When an Index mark is found, the DVD Recorder & VCR will playback the tape for 5 seconds, after which it will continue searching for the next Index mark.
58 - English R ecording ■ Finalize - This closes the DVD-RW/± R so no additional recording can be done. ■ Unfinalize - This allows additional recording on a DVD-RW disc originally recorded on the DVD-VR329. - A DVD-RW disc that has been recorded by DAO(Disc At Once) in a PC cannot be unfinalized.
English - 59 R ecording Recording Formats When you insert an unused disc, the following message appears. Since available functions differ depending on the disc type, select a disc that best fits your prefer- ences. DVD-RAM: Use after formatting the disc.
60 - English R ecording Concerning Copy Control Signals TV broadcasts that contain copy control signals may have one of the following three signal types, Copy-Free, Copy- Once and Copy-Never . If you want to record a copy-once type program, use DVD-RW with CPRM in VR Mode or DVD-RAM discs.
R ecording Recording through the DV Input jack Recording from External Devices Follow these directions to record onto a disc or a tape from External Devices such as a Camcorder . 1 Connect the A V out jack of your External Device to the A V IN jack on the front or rear of your DVD Recorder & VCR using the Audio/V ideo Cable.
62 - English R ecording Making a T imer Recording Making a One T ouch Recording (OTR) One-T ouch Recording (OTR) allows you to add recording time in preset increments up to 4 hours by pressing the REC button repeatedly . 1 Press the CH/TRK ( / ) buttons or number but- tons to select the channel to record.
English - 63 R ecording • Recording mode (VCR) AUTO : Select when you want to set video quality automatically . The auto quality depends on remaining time of VCR tape. SP : Standard Play , for best picture quality . SLP : Super Long Play , for maximum recording time (3 times SP).
R ecording Editing the Scheduled Record List Follow these directions to edit the timer record list. 1 Press the MENU button. 2 Press the …† button to select Timer Rec. , then press the ENTER or √ button. 3 Press the …† button to select Scheduled Record List , then press the ENTER or √ button.
English - 65 R ecording Basic VCR Recording Before starting 1. Check TV channel and Antenna connections. 2. Check the remaining time on the tape. Y ou can record a TV show in progress by inserting a blank tape and pressing the ( REC ) button.
66 - English R ecording 4 Press the ( REC ) button on the remote control or front panel. For options while recording is in progress, see “ Special Recording Features ” . 5 Press the STOP button to stop or finish a record- ing in progress. 1 Press INFO button on the remote control.
R ecording Y ou can copy from the DVD to VCR or VCR to DVD. Check the remaining time on the tape and Disc. T o copy from DVD to VCR 1 With the unit in Stop mode, press the MENU button. 2 Press the …† buttons to select Copy , then press the ENTER or √ button.
68 - English R ecording T o copy from VCR to DVD 1 With the unit in Stop mode, press the MENU button in stop mode. 2 Press the …† buttons to select Copy , then press the ENTER or √ button. 3 Press the …† buttons to select VCR-->DVD , then press the ENTER or √ button.
E diting E diting This section introduces basic functions of DVD editing and explains both edit functions for the recording on a disc and edit functions for the entire disc. Playing the T itle List .....................................................
70 - English E diting 2 Press the …† buttons to select Title List , then press the ENTER or √ button twice. The T itle List screen is displayed. 3 Press the …† buttons to select a T itle, then press the ENTER or √ button.
E diting 2 Press the …† buttons to select a T itle you want to delete, then press the ENTER or √ button. 3 Press the …† button to select Delete , then press the ENTER or √ button. • Y ou will be prompted with the confirmation message 'Do you want to delete?'.
E diting Locking(Protecting) a Title Follow these instructions to lock a title to protect it from accidental deletion. 1 Press the TITLE LIST button. The T itle List screen is displayed. Or use the MENU button. • Press the MENU button. • Press the …† buttons to select Title List , then press the ENTER or √ button twice.
English - 73 E diting Deleting a Title Follow these instructions to delete a title from the T itle List. 1 Press the TITLE LIST button. The T itle List screen is displayed. Or use the MENU button. • Press the MENU button. • Press the …† buttons to select Title List , then press the ENTER or √ button twice.
E diting 5 Press the ENTER button at the end point. The image and end point time are displayed in the Section deletion ending point window . 6 Press the œ√ buttons to select Delete , then press the ENTER button. 7 Press the œ√ buttons to select Ye s , then press the ENTER button.
E diting Editing a Chapter Y ou can make your own chapters on DVD+RWs and edit them using the Chapter Edit menu. 1 Press the TITLE LIST button. The T itle List screen is displayed. Or use the MENU button. • Press the MENU button. • Press the …† buttons to select Title List , then press the ENTER or √ button twice.
76 - English E diting Deleting all chapters Follow steps 1 to 3 in page 75 If there is only one chapter , it can ’ t be hidden. Hidden/Show menu is not available if there is one chapter in the selected title. The hidden chapters are not shown on the existing DVD players.
English - 77 E diting Dividing a Title Follow these instructions to divide a long title into several titles. 1 Press the TITLE LIST button. The T itle List screen is displayed. Or use the MENU button. • Press the MENU button. • Press the …† buttons to select Title List , then press the ENTER or √ button twice.
78 - English E diting 5 Press the ENTER button at the end point. • The image and end point time are displayed in the End window . • The yellow-colored selection bar moves to the Make icon. - T o make a new playlist - 6 Press the œ √ buttons to select Make , then press the ENTER button.
English - 79 E diting Playing Titles in the Playlist Follow these instructions to play the playlist titles. 1 Press the PLA Y LIST button with the disc stopped. The Edit Playlist screen is displayed. Or use the MENU button. • Press the MENU button with the disc stopped.
80 - English E diting 3 Press the …† buttons to select Rename , then press the ENTER or √ button. The Rename screen is displayed. 4 Enter the desired characters using the …† œ √ buttons. • This function is the same as the Rename function in renaming the title list.
English - 81 E diting 6 Press the ENTER button at the start point of the scene. • The image and starting point time are displayed on the Start window . • Select the starting or ending point of the section you want to modify using the playback related buttons ( √ II , I œœ , √√ I , œœ , √√ ).
4 Press the …† œ √ buttons to select the scene you want to move (change the position), then press the ENTER button. 5 Press the …† buttons to select Move , then press the ENTER button. • A yellow selection window is displayed on the scene to be moved.
English - 83 E diting 7 Press the ENTER button at the end point of the scene. • The image and time of the end point are displayed in the End window . • T o cancel, press the œ √ buttons to select cancel and then press the ENTER button. 8 Press the …† buttons to select Add , then press the ENTER button.
Deleting a Playlist Title from the Playlist 1 Press the PLA Y LIST button with the disc stopped. The Edit Playlist screen is displayed. Or use the MENU button. • Press the MENU button with the disc stopped. • Press the …† buttons to select Playlist , then press the ENTER or √ button.
English - 85 E diting 2 Press the …† buttons to select Disc Manager , then press the ENTER or √ button. 3 Press the …† buttons to select Disc Name , then press the ENTER or √ button. The Edit Name screen is displayed. 4 Enter the desired characters using the …† œ √ buttons.
Formatting a Disc Use these instructions to format a disc. Clear disc protection before formatting. 1 With the unit in Stop mode, press the MENU button. 2 Press the …† buttons to select Disc Manager , then press the ENTER or √ button. 3 Press the …† buttons to select Disc Format , then press the ENTER or √ button.
English - 87 E diting 2 Press the …† buttons to select Disc Manager , then press the ENTER or √ button. 3 Press the …† button to select Disc Finalize , then press the ENTER or √ button. Y ou will be prompted with the message 'Do you want to finalize disc?'.
88 - English E diting 3 Press the …† button to select Disc Unfinalize , then press the ENTER or √ button. Y ou will be prompted with the message 'Do you want to unfinalize disc?'. If you select Y es, you will be prompted again with the message 'Disc will be unfinalized.
English - 89 E diting • When Protected T itle exists: The Delete All T itle List function will not operate. If there is a title containing a still picture, however , that function will not operate. If you want to delete a protected title, disable Protect for it on the Lock item.
90 - English R eference R eference T roubleshooting Specifications LIMITED W ARRANTY TO ORIGINAL PURCHASER † † T roubleshooting (DVD-VIDEO/DVD-RAM/DVD±R W/DVD±R) .................91 T roubleshooting (DVD) ........................................
English - 91 R eference If your product malfunctions, go through the check points below before contacting a Samsung authorized ser- vice center , Problem Explanation/Solution • Check whether the power cord is securely plugged into the power outlet. • Did you press the power button of your DVD Recorder & VCR.
92 - English R eference T roubleshooting (DVD) Problem Explanation/Solution Y ou cannot use the operation or function due to one of the following reasons: (1) Y our DVD disc does not support the feature (for example, angles) (2) Y ou've requested a title, chapter , or scan time that is out of the correct range.
English - 93 R eference T roubleshooting (VCR) Before contacting a Samsung authorized service center , perform the following simple checks. Problem Explanation/Solution No power • Check that the power plug is connected to a wall outlet.
94 - English R eference Problems and Solutions (Display error Message) Explanation / Solution • Y ou can’t record the video since it is protected by copyright. • Disc you are using is protected. T o record on this disc or use this function, cancel the disc protection function.
English - 95 R eference Problems and Solutions (Display error Message) Explanation / Solution • Y ou can’t use the disc because it contains errors from previous recordings. Use the disc after formatting. • When operating, errors happen. T urn of f the device.
96 - English R eference Power requirements 120V AC, 60Hz Power consumption 28 W atts General Weight 8.75 lb Dimensions 16.9 in(W) x 10.6 in(D) x 3.1 in(H) Operating temp. +41°F to +95°F Other conditions Keep level when operating. Less than 75% operating humidity Video 1.
SAMSUNG DVD RECORDER & VCR LIMITED W ARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center . 01172A(00)-VR329_XAA-Eng3 2006.
SAMSUNG ELECTRONICS AMERICA, INC. 105 Challenger Road, Ridgefield Park, N.J. 07660-051 1 TEL: 1-800-SAMSUNG (726-7864) AK68-01 172A-00 English 01172A(00)-VR329_XAA-Eng3 2006.
Ein wichtiger Punkt beim Kauf des Geräts Samsung DVD-VR329 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Samsung DVD-VR329 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Samsung DVD-VR329 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Samsung DVD-VR329 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Samsung DVD-VR329 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Samsung DVD-VR329 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Samsung DVD-VR329 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Samsung DVD-VR329. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Samsung DVD-VR329 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
