Benutzeranleitung / Produktwartung SC155VS des Produzenten Ryobi
Zur Seite of 24
OPERA T OR'S MANUAL 16 in. (406 mm) Scroll Saw Model SC155VS SA VE THIS MANUAL FOR FUTURE REFERENCE THANK YOU FOR BUYING A RYOBI SCROLL SAW. Your new scroll saw has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety.
Page 2 TABLE OF CONTENTS ■ Table of Contents .............................................................................................................. .......................................... 2 ■ Introduction ...............................
Page 3 IMPORTANT Servicing requires extreme care and knowledge of the system and should be performed only by a qualified service technician. For service we suggest you return the tool to your nearest Ryobi Authorized Service Center. When servicing always use identical Ryobi replacement parts.
Page 4 ■ USE THE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
Page 5 ■ BEFORE MAKING A CUT, BE SURE ALL ADJUST- MENTS ARE SECURE. ■ BEFORE CHANGING THE SETUP, REMOVING COV- ERS, GUARDS OR BLADE, UNPLUG THE SAW. ■ DO NOT FEED THE MATERIAL TOO QUICKLY while cutting. Do not force the workpiece against the blade.
Page 6 EXTENSION CORDS Use only 3-wire extension cords that have 3-prong ground- ing plugs and 3-pole receptacles that accept the tool's plug. When using a power tool at a considerable distance from the power source, use an extension cord heavy enough to carry the current that the tool will draw.
Page 7 Bevel Cut A cutting operation made with the table at any angle other than 90˚ to the blade. Crosscut A cutting or shaping operation made across the grain of the workpiece. Compound Cut A compound cut is a cut made using a miter angle and a bevel angle at the same time.
Page 8 UNP ACKING CAUTION: To prevent accidental starting or electrical shock that could cause possible serious personal injury, assemble all parts to your saw before connecting it to power supply.
Page 9 45˚ 30˚ 15˚ This versatile variable speed scroll saw is great for making toys, puzzles, games, artwork, and jewelry. It is a handy do- it-yourself tool. It cuts wood, wood composition products, plastic, and other fibrous material up to 2 inches thick.
Page 10 FEA TURES SAW TABLE Your scroll saw has an aluminum saw table that provides a working surface to support your workpiece. TABLE LOCK LEVER Allows you to tilt the table and lock it at the desired angle up to 45 degrees. BEVEL SCALE The bevel scale and indicator are located on the front of the saw for easy viewing.
Page 11 45˚ 30˚ 15˚ ADJUSTMENTS W ARNING: To prevent accidental starting that could cause possible serious personal injury, turn off the saw and unplug before making any adjustments. HOLD DOWN FOOT/BLADE GUARD See Figure 7. The hold down foot should be adjusted so it applies light pressure to the top surface of the work being cut.
Page 12 15˚ 30˚ 45˚ 0˚ 45˚ 30˚ 15˚ SQUARING TABLE TO THE BLADE See Figures 8 and 9. ■ Loosen the hold down foot lock lever and move hold down rod all the way up. Tighten lever. ■ Loosen the table lock lever and move the table until it is approximately perpendicular, or at right angle to the blade.
Page 13 ADJUSTMENTS Fig. 10 Fig. 11 Fig. 12 Fig. 13 LOWER BLADE HOLDER FOR PIN END BLADES UPPER BLADE HOLDER FOR PIN END BLADES PIN END BLADE CORRECT ORIENTATION FOR BLADE HOLDER BLOCK BLADE HOLDER BL.
Page 14 ADJUSTMENTS Fig. 17 Fig. 16 Fig. 15 Fig. 14 ■ Tighten the hold down foot lock lever. ■ Position blade and securely tighten upper blade knob. ■ Remove blade changing rod. ■ Turn the quick release knob to the right or clockwise to tension the blade.
Page 15 0˚ ON/OFF KNOB WITH VARIABLE SPEED See Figure 18. Your scroll saw has an easy access On/Off knob with variable speed. ■ Pull the knob out to turn ON the saw, and push the knob in to turn OFF the saw. Note: After saw is turned on, a hesitation before blade movement is normal.
Page 16 45˚ 30˚ 15˚ 0˚ LOCK OFF POST See Figure 19. To prevent unauthorized use of your scroll saw, we suggest that you disconnect it from the power supply and lock the knob in the OFF position. A padlock with a 3/16 in. shackle should be used. When the lock is installed and locked, as illustrated, the switch is inoperable.
Page 17 45˚ 30˚ 15˚ CHOICE OF BLADE AND SPEED The scroll saw accepts a wide variety of blade widths and thicknesses for cutting wood and other fibrous materials.
Page 18 0˚ W ARNING: When servicing, use only identical Ryobi replacement parts. Use of any other part may create a hazard or cause product damage. W ARNING: To prevent accidental starting that could cause possible serious personal injury, turn off and unplug the saw before maintaining or lubricating your scroll saw.
Page 19 MAINTENANCE ■ Reassemble using new brush assembly. Make sure curvature of brush matches curvature of motor and that brush moves freely in brush tube. Use the blunt end of something thin (eraser end of pencil, etc.) to push the brush into the tube until it stays.
Page 20 R YOBI 16 in. SCROLL SA W – MODEL NUMBER SC155VS 1 2 3 4 5 6 7 8 9 11 10 12 13 14 15 16 17 18 20 19 21 22 23 26 27 28 29 30 31 32 33 25 24 34 35 35 34 37 38 38 19 37 43 42 39 40 41 44 45 46 .
Page 21 1 350305122 Flat Washer (M5) ..................................................... 1 2 105022006 Clamp ...................................................................... 1 3 105023002 Hold Down Foot ........................................
Page 22 R YOBI 16 in. SCROLL SA W – MODEL NUMBER SC155VS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 25 23 26 27 28 29 30 31 15 32 33 34 35 36 37 38 39 40 39 34 37 41 42 43 34 FIGURE.
Page 23 The model number will be found on a plate attached to the base. Always mention the model number in all correspondence regarding your SCROLL SA W or when ordering repair parts. R YOBI 16 in. SCROLL SA W – MODEL NUMBER SC155VS SEE BACK P AGE FOR P ARTS ORDERING INSTRUCTIONS P ARTS LIST FOR FIGURE B Key Part No.
OPERA T OR'S MANUAL 16 in. (406 mm) Scroll Saw Model SC155VS 972000-704 RYOBI AMERICA CORPORATION 1424 Pearman Dairy Road Anderson SC 29625 Post Office Box 1207 Anderson SC 29622 Phone 1-800-525-2579 www.
Ein wichtiger Punkt beim Kauf des Geräts Ryobi SC155VS (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Ryobi SC155VS noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Ryobi SC155VS - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Ryobi SC155VS reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Ryobi SC155VS erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Ryobi SC155VS besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Ryobi SC155VS verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Ryobi SC155VS. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Ryobi SC155VS gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
