Benutzeranleitung / Produktwartung LS-HB Ultra des Produzenten Runco
Zur Seite of 112
LS-HB LS-HB Ultra High-Brightness, Full-HD Home Theater Projector I NSTALLATION /O PERATION M ANUAL.
.
Runco LS-HB/LS-HB Ultra Install ation/Operation Manual iii PRE L IMINAR Y RuncoCare™ S tandard Two Year Limited Warranty Congratulations o n your purchase of a Runco® product ! With proper installation, se tup and care, you should enjoy many yea rs of unpara lleled video p erformance.
iv Runco LS-HB/LS-HB Ultra In stallation/Operation Manual PRE L IMINAR Y • In the event of a product defec t, please follo w the claim proced ure provided belo w: A. Register your p roduct if you h ave not yet do ne so. Visit ht tp://www.run co.com/sup port/product -registration/ to register the p roduct.
Runco LS-H B/LS-HB Ultra Install ation/Operatio n Manual v PRE L IMINAR Y 4. Damage, det erioration, or malfunction re sulting from: A. Accident, abus e, misuse, neg lect, improper ve ntilation, fire,.
vi Runco LS-HB/LS-HB Ultra In stallation/Operation Manual PRE L IMINAR Y Runco offers e xtended and e xpanded servic e plans. For in formation on ad ditional produc t protection, p lease ask your authorized Run co dealer, e mail serviceor ders@runco. com or call (toll fr ee) (800) 23RUNCO (800-237-8626 ).
Runco LS-H B/LS-HB Ultra Install ation/Operation Manual vii PRE L IMINAR Y Thank you fo r your purchase of this qualit y Runco video product! Fo r the best pe rformance, please read this m anual carefully as it is your guid e through the menus and ope ration.
viii Runco LS-HB/LS-HB Ul tra In stallation/Operation Manual PRE L IMINAR Y Manufacturer’s Name: Runco International, LL C Manufacture r’s Address: 119 5 NW Compton Dr ive, Beaverton, OR 97006-19 .
Runco LS-H B/LS-HB Ultra Install ation/Operatio n Manual ix PRE L IMINAR Y NOTE: This equipment has b een tested a nd found to comply with th e limits for a C lass B digital device, pursua nt to Part 15 o f the FCC Rules. T hese limits ar e designed to p rovide reasonab le protection ag ainst harmful inter ference in a resid ential installation.
x Runco LS-HB/LS-HB U ltra In stallation/Operation Manual PRE L IMINAR Y Note s :.
Runco LS-H B/LS-HB Ultra Install ation/Operatio n Manual xi 1 Table of Content s PRE L IMINAR Y RuncoCare™ S tandard Two Year Limited Warran ty ........ ................... ................. ....... iii Important S afety In s truction s ............
Table of Contents xii Runco LS-HB /LS-HB Ultra In stallation/Operation Manual PRE L IMINAR Y Installing the Primary Projecti on Lens (LS-HB Ultra only) ... ................ ................ .......... 21 Removing the Projector Fro nt Cover ...........
Table of Contents Runco LS-H B/LS-HB Ultra Install ation/Operation Manual xiii PRE L IMINAR Y 4. Operation .......... ................ ................ ................ ................ ................ ............. .......... 47 Selecting Video Mem ory .
Table of Contents xiv Runco LS-HB/LS -HB Ultra In stallation/Operation Manual PRE L IMINAR Y Note s :.
Runco LS-H B/LS-HB Ultra Install ation/Operation Manual xv 1 Li s t of Figure s PRE L IMINAR Y 2-1. LS-HB F ront/Side View ....... ................ ................ ................ ................ ............. ............ 5 2-2. LS-HB Re ar/Bottom/To p View .
List of Figures xvi Runco LS-HB/L S-HB Ultra In stallation/Operation Manual PRE L IMINAR Y 4-15. LS-HB Service Menu ......... ................ ................ ................ ................ ................. ...... 70 7-1. LS-HB Dim ensions .... .
Introd uction Runco LS-H B/LS-HB Ultra Install ation/Operatio n Manual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s M anual describes h ow to install, set up and operate a Runco LS-HB or LS-HB Ultra Dig ital Light Proc essing (DLP™) Project or.
Introduc tion 2 Runco LS-HB/LS-HB Ultra In stallation/Operation Manual PRE L IMINAR Y Graphic Convention s : These sym bols appear in n umerous plac es throughout the manual, to emp hasize points th at you must k eep in mind to a void problems wit h your equipment o r injury: 1.
Introd uction Runco LS-H B/LS-HB Ultra Install ation/Operatio n Manual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits Elegant and electr ifying, the LightStyle™ Serie s LS-HB/LS-HB Ultra Home Theater Projector is Runco’ s first-ever 1080p proje ctor designed for bo th performance and esthetics.
Introduc tion 4 Runco LS-HB/LS-HB Ultra In stallation/Operation Manual PRE L IMINAR Y Key Features and Benefits The LS-HB offers th ese key features and be nefits: • Native Resolution: 1920 x 108 0 .
Controls and Functi ons Runco LS-H B/LS-HB Ultra Install ation/Operatio n Manual 5 PRE L IMINAR Y 2.1 LS-HB at a Glance Figure 2-1 and Figure 2-2 show the key LS-HB compone nts. Figure 2-1. L S -HB Front/ S ide View • TOP IR S EN S OR Receives infrare d signals from the remot e control unit.
Controls and Functions 6 Runco LS-HB/LS-HB Ultra In stallation/Operation Manual PRE L IMINAR Y • PROJECTION LEN S Available in three versions: • Standar d throw ran ge (1.89:1 t o 2.40:1); • Short th row range ( 1.59:1 to 1.8 6:1); and • Long throw r ange (2.
Controls and Functi ons Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 7 PRE L IMINAR Y Figure 2-2. L S -HB Rear/Bottom/Top View 2 6 3 7 1 5 4.
Controls and Functions 8 Runco LS-HB/LS-HB Ultra In stallation/Operation Manual PRE L IMINAR Y 1. RUNCO LOGO BADGE Remove to access the vertical lens shift contro l. 2. REAR COVER Remove to acce ss connectors . 3. LAMP MODULE COVER Remove this cover to ac cess the lamp compart ment.
Controls and Functi ons Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 9 PRE L IMINAR Y 2.2 LS-HB Rear Panel Figure 2-3 shows the LS-HB r ear panel. Figure 2-3. L S -HB Rear Panel 1. HDMI 1 (Digital) HDMI 2 (Digital) HDCP-compliant digital v ideo inputs for co nnecting an HDM I or DVI source.
Controls and Functions 10 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y 6. S -VIDEO A standard S-Video input for connecting a DVD player, sate llite receiver or Super VH S (S-VHS) VCR. 7. IR INPUT Wired input from a Niles- or Xantech-co mpatible, infrared (I R) repeat er system.
Controls and Functi ons Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 11 PRE L IMINAR Y 5. A s pect Ratio S election Bu tton Press this button re peatedly to select one of the follow ing aspect rati os: 16 : 9: For viewing 16:9 DVDs or HDTV program s in their nat ive aspect ra tio.
Controls and Functions 12 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y Note s :.
Installation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 13 PRE L IMINAR Y 3.1 Remote Control To install batteries in the remote co ntrol: 1. Slide the bat tery compartm ent cover in t he direction o f the arrow to remove it. 2. Install two AA batt eries with the correct polarity.
Installation 14 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y • The projector’ s front IR receiver has a rang e of approximately 40 feet (12.19 mete rs); the top IR re ceiver has a range of ap proximately 20 feet (6.1 0 meters).
Installation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 15 PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a quick ove rview of the LS-HB installation process. The sections following this one prov ide detail ed instruc tions. Installation shou ld be performed by a quali fied custom video installation specialist.
Installation 16 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y 3.3 Installation Considerations Proper insta llation of your p rojector will e nsure the qu ality of your display.
Installation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 17 PRE L IMINAR Y Ambient Light In general, minimize or eliminat e light so urces directed at the screen .
Installation 18 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y Table 3-3 lists the available LS-HB lens option s and their associa ted throw ratios.
Installation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 19 PRE L IMINAR Y Figure 3-3. Pr ojector Placement Lens Shift You can use th e lens shift cont rols on the pro jector to center the image on the screen. Lens shift is generally exp ressed as a p ercentage of the screen he ight or width, as shown in Figure 3-4.
Installation 20 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y Vertical Len s S hift — L S -HB Ultra: The L S -HB Ultra provide s up to 25 % of upward vertical len s s hift and up to 35% of downwar d vertical len s s hift. For example, wi th a 100 x 56 inch (1.
Installation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 21 PRE L IMINAR Y 3.4 Installing the Primary Projection Lens (LS-HB Ultra only) The LS-HB Ultra primary projection lens is sh ipped separately from the projector. Proc eed as follows to install it: Removing the Projector Front Cover 1.
Installation 22 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y Installing the Lens 5. Carefully remove the lens and other inst allation hardwa re (in a small plasti c bag) from the shipping container. 6. Remove the rear cap from the lens.
Installation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 23 PRE L IMINAR Y Re-Assembling the Projector 11. Attach the black wire to the str ay light shield.
Installation 24 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y 3.5 Installing the Optional Anamorphic Lens Mount If you are in stalling a stan dard LS-HB (without an an amorphic lens), s kip this step a nd proceed with Mounting the LS-HB (page 30).
Installation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 25 PRE L IMINAR Y • Anamorph ic lens and m ounting bracke t Attaching the Tran s po rt A ss embly Attachment Plat e: 1. Place the proje ctor upside do wn on a bla nket or other soft surface .
Installation 26 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y 3. If you are mounting the pr ojector on a ceiling: Line up the ho les on the Ceiling Mount Plate (included with the projector ceiling mount kit) with those on the bottom of the projecto r and attachm ent plate.
Installation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 27 PRE L IMINAR Y In s talling the Anamorphic Len s Tran s port A ss embly : After installing the Transport Assembly Attachment Plate and Ceiling Mount Plate, proceed as follows to install the Anamorphic Le ns Transport Assemb ly.
Installation 28 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y Attaching the S ecurity Hook s : To help stabilize and support the added weig ht of the Anamorphic Lens and Le ns.
Installation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 29 PRE L IMINAR Y Installing the Fixed Anamorphic Lens Base Plate To install the base pl ate on an LS-HB with a fixed anamorphic lens: 1. Place the proje ctor upside do wn on a bla nket or other soft surface .
Installation 30 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y 3.6 Mounting the LS-HB There are se veral method s for mounting the projector . Depending on your chosen installation, one method may b e more suit able than anoth er.
Installation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 31 PRE L IMINAR Y Adjusting the Projection Angle If the screen is significantly higher or lower than the projector, you can also tilt the projector at a slight angle. In a ceiling installation, you do this by adjusting the ceiling mount.
Installation 32 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y 3.7 Connections to the LS-HB Proceed as follow s to connect the LS-HB to yo ur video sources, external contr oller(s) – if present – and AC power. When connec ting your equipm ent: • Use the correc t signal cables for ea ch source.
Installation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 33 PRE L IMINAR Y Connecting Source Components to the LS-HB Connect your vid eo sources to t he LS-HB as shown and descri bed in the sections that follow. HDMI/DVI Connection s : See Figur e 3-8.
Installation 34 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y RGBHV Connection s : Connect your personal c omputer or o ther RGB source to the RGB input.
Installation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 35 PRE L IMINAR Y S CART RGB S Connection: If the source ou tputs RGB with c omposite s ync, connect the green, b lue and red outputs to th e Y, Pb an d Pr terminals on the COMPONENT 1/ S CART input and the sy nc output to the VIDEO input .
Installation 36 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y Component Video Co nnection s : Connec t your comp onent video sources to the COMPONENT 1/ S CAR T or RGB inputs as shown in Figure 3-11.
Installation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 37 PRE L IMINAR Y Compo s ite/ S -Video Connection s : Connect your Co mposite and S-Vide o sources to the LS-HB as shown in Figur e 3-12.
Installation 38 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y RS-232 Controller Connection Connect a PC or home theater control/automation system (if pr esent) to the RS-232 port on the LS-HB; see Figure 3-13. Use a standard , 9-pin se rial cable, wired stra ight-throu gh.
Installation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 39 PRE L IMINAR Y Connecting 12-Volt Trigger Output to External Theater Equipment If your LS-H B is equipped w ith a movable a namo.
Installation 40 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y Connecting an External IR Receiver If infrared sig nals from the r emote control cannot reach the projecto r due .
Installation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 41 PRE L IMINAR Y 3.8 Turning on the Power 1. Tur n on your sour ce compone nts. 2. Press the ON butto n on the remo te control to tu rn on the LS-HB. T he LED flashes green to indicate th at it is warming up .
Installation 42 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y 3.10 Changing the OSD Language When you turn on th e LS-HB for the fir st time, the OSD La nguage Menu appe ars.
Installation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 43 PRE L IMINAR Y 3.12 Installing and Adjusting the Anamorphic Lens If you are installing a n LS-HB with an an amorphic lens, p roceed as follows to install and adjust that lens .
Installation 44 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y 1. Use the Height/ Pitch Adjustme nt Screws ( 3 ) and Washers ( 2 ) to attach the Lens Mounting Bracket ( 5 ) to the Anamorphic Lens ( 1 ). 2. Remove the n ut and rubber collar from e ach Swell Latch Assem bly ( 4 ).
Installation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 45 PRE L IMINAR Y 4. Then, adjust t he anamorphic lens angle so t hat the projecte d image is rec tangular: The anamorphic lens will almost always be angled with respect to the pr ojector; this is normal.
Installation 46 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y S et Trigger Output to “Letter box”: The LS-HB anamorphic lens soluti on maintains constant imag e height inde pendent of the aspect ratio, while using th e full display resolution o f the projector .
Operation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 47 PRE L IMINAR Y 4.1 Selecting Video Memory Press M1, M2 or M3 to recall settings fro m a memory p reset. Then, press ENTER to confirm your sele ction. Or, to cancel the op eration, pre ss to select Cancel and press ENTER .
Operation 48 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y 4.4 Using Picture-In-Picture (PIP) For PIP purpo ses, there are three grou ps of inputs separated by th eir displa y modes: •V i d e o ( S D) group: Video, S-Vi deo and SCART inputs.
Operation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 49 PRE L IMINAR Y 4.5 Using the On-Screen Menus 1. Press the MENU button on the remote control or system keypad to display the Main Menu. 2. There are six menus. Pres s or to select a sub-menu .
Operation 50 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y Main The LS-HB Main Menu, shown in Figure 4-2, p rovides access to the most commonly-used pr ojector functions. Figure 4-2. L S -HB Main Menu ➤ Image controls only opera te on the active source.
Operation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 51 PRE L IMINAR Y A s pect Ratio: To chan ge the aspect r atio (size and sh ape) of the pr ojected image, press or to highlight Aspect Ratio.
Operation 52 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y Letterbox Letterbox mode scales (zooms in on) a 4:3 image linearly (by the same amount on all sides) to fill a 16:9 display, cropping the top and bottom of the image.
Operation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 53 PRE L IMINAR Y Native Select Native to display the source si gnal in its native reso lution, centered in the display area with no re-sizing or overscan.
Operation 54 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y Memory: Select Memory fr om the Main menu , then press ENTER to re call image qualit y settings previously sa ved, or to s ave changed settings in any of fo ur memory loc ations.
Operation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 55 PRE L IMINAR Y Brightne ss : On your external test pa ttern source, se lect a PLUG E pattern. (PLUG E is an acronym for “Picture Line-Up Generation Equipme nt.”) Figure 4-3 shows a typical PLUG E pattern.
Operation 56 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y Color: To adjust the o verall color inte nsity, sele ct Color from the Ma in menu. Decrease this setting if colors are overly satu rated; increase it if colors appear m uted or washed ou t.
Operation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 57 PRE L IMINAR Y • S harpne ss Mode: Sharpness Mode allows or preve nts access to the detailed sharpness contro ls in this menu. In most cases, S imple mode provides a sufficie nt level of control to pro duce the best picture from th e most popular sourc es.
Operation 58 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y Over s can: Some television pr ograms are produc ed based on the assumption th at older television sets may not displa y the outer edge s of the broadcast pi cture area.
Operation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 59 PRE L IMINAR Y Figure 4-7. S ource S ele ct S ub-Menu PIP S elect: To select a PIP (seconda ry) video source , press or to highlight PIP Select, then pr ess ENTER . The default PIP selection is Off .
Operation 60 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y Advanced Use the contro ls in the Advanced me nu, shown in Figu re 4-8, to perfo rm advanced image adjustments.
Operation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 61 PRE L IMINAR Y Video S tandard: Select Video Standard from the Advanced menu to spec ify the colo r system for composite video or S-Video input signals. Different count ries use differen t formats for video signals.
Operation 62 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y RGB Adju s t: To r emove any tr ace of colo r from the white areas of the projec ted image, choose RGB Adju st from the Advan ced menu and p ress ENTER . This displays the RGB Adjust sub-menu, shown in Figure 4-9.
Operation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 63 PRE L IMINAR Y Fine S ync: To fine-tune the po sition and other image attr ibutes, choo se Fine Sync from the Advanced m enu and press ENTER . This di splays the Fine Sy nc sub-menu , shown in Figure 4-10.
Operation 64 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y is consistent acr oss the screen, that aspect rat io is maintained a nd that pixel pha se (see above) ca n be optimized. • S ync Level (Component s ource s only): Select Sync Level to ad just the voltage level of the LS-HB Sync signal detection circuitry.
Operation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 65 PRE L IMINAR Y S ource Enable: To enable or disable selectio n of a source, choose Sourc e Enable from the System me nu and press ENTER . This displays th e Source Enable sub-menu, sho wn in Figure 4-12.
Operation 66 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y PIP Po s ition: To change the position of th e PIP image, choose PIP Position from the System menu; see Figure 4-13. Choose one o f the following: • Top Left : This places the PIP source into a 6 44x362 designated image area at the top left of the scr een.
Operation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 67 PRE L IMINAR Y Figure 4-14. PIP S plit- S creen Mode Menu Po s ition: Select Menu Position from the System menu to change the OSD menu position. The default setting is “ “ (top left).
Operation 68 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y Control Select Contro l from the Main Menu to set var ious options relate d to control of the projector . 1 Key / 2 Key / 3 Key / 4 Key / 5 Key: These menu items assign the function of the keys numbered 1 through 5 on the remot e.
Operation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 69 PRE L IMINAR Y • R S 232 causes the por t to output 1 2 volts when an RS232 screen tr igger 1 “on” command is re ceived and stop whe n a trigger 1 “ o ff” comman d is received.
Operation 70 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y Service Access the Service M enu, shown in Figure 4-15, to view information that u niquely identifies your p rojecto.
Operation Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 71 PRE L IMINAR Y Lamp Hour Re s et: When you repla ce the projec tor lamp ( refer to Lamp Replacement on page 73 ), you should also reset the lamp hour counter. To do this, sele ct Lamp Hou r Reset from th e Service menu, th en press ENTER .
Operation 72 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y To turn test patterns off, p ress any key ot her than or on the rem ote control un it or built-in keypad. Altitude: Select Altitude from the Servic e Menu to control the o peration of the projec tor’s cooling fan.
Maintenance and Troubleshooting Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 73 PRE L IMINAR Y 5.1 Lamp Replacement The lamp should be replac ed when it rea ches the end of its life (typ ically 2000 hou rs), or sooner if a no ticeable degrad ation in br ightness occur s.
Maintenance and Troubleshooting 74 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y 5.2 Troubleshooting Tips Table 5-1 provide s some general guidelines for troubleshooting proble ms you may encounter w ith the LS-HB .
Maintenance and Troubleshooting Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 75 PRE L IMINAR Y Colors in the image are swapped; for example, reds appear blue or vice versa. •T h e R e d / P r , G r e e n / Y o r Blue/Pb outputs from t he source are connected to the wrong inputs on the LS-HB.
Maintenance and Troubleshooting 76 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y Note s :.
Serial Communications Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 77 PRE L IMINAR Y 6.1 RS-232 Connection and Port Configuration To interface the LS-HB with a home theater automation/control syst em or a PC running terminal e mulation soft ware: 1.
Serial Communications 78 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y Table 6-1 lists t he serial comman d key names and IR codes. Table 6-1. S erial Command Key Name s and IR Code s R S 232 Keyname Remote Button IR Code De s cription S et 1 S et 2 pow.
Serial Communications Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 79 PRE L IMINAR Y gam.crt (none) 0x86 0xC6 Switch to CRT gamma (2.5). gam.film (none) 0x87 0xC7 Switch to Film gamm a (2.2). gam.vide (none) 0x88 0xC8 Switch to Video gamma.
Serial Communications 80 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y Operations Commands Op erations co mmands allow m ore flexible and direct contro l of the projec tor.
Serial Communications Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 81 PRE L IMINAR Y Table 6-2 lists the valid operation s commands. For a ll but Execute fun ctions, the respon se from the pro jector is t he comman d and “= <value>” where <value> is the current v alue or “NA” if th e value is not av ailable.
Serial Communications 82 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y save.isf = 0 = ISF Day 1 = ISF Night bright contrast saturat tint sharp.simple = ? + - 0 - 20 0 sharp.mode = ? 0 = Simple 1 = Advanced horiz.sharp vert.sharp diag.
Serial Communications Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 83 PRE L IMINAR Y resync (execute) color.space = ? 0 = Auto 1 = REC709 2 = REC601 3 = RGB-PC 4 = RGB-Video video.stand = ? 0 = Auto 1 = NTSC 2 = PAL 3 = SECAM gamma = ? 0 = CRT (2.
Serial Communications 84 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y trans.menu = ? 0 = 0% 1 = 25% 2 = 50% 3 = 75% blank.screen = ? 0 = Black 1 = Blue 2 = White 3 = Logo auto.pow.off = ? 0 = Off 1 = On auto.pow.on = ? 0 = Off 1 = On rear.
Serial Communications Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 85 PRE L IMINAR Y soft.version ? <string> act.source pip.source ? 0 = HDMI 1 1 = HDMI 2 2 = RGB 3 = YPrPb 1 5 = S-video 6 = Video 7 = SCART h.refresh ? <number> kHz v.
Serial Communications 86 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y status ? 0 = Standby 1 = Powering Up 2 = Displaying 3 = Cooling Down 4 = Error errcode ? Refer to RS-232 Error Codes , below.
Serial Communications Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 87 PRE L IMINAR Y RS-232 Error Codes If an errcode ? command returns one of the following values, you have encountered a likely system error requiring the attention of a qualified service techni cian.
Serial Communications 88 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual PRE L IMINAR Y Note s :.
Specifications Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 89 PRE L IMINAR Y 7.1 LS-HB Specifications Table 7-1 lists the LS-HB sp ecificat ions.
Specifications 90 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual P RELI M INARY Performance Microdi s play: Texas Instruments DLP® 1080p DMD Native Re s olution: Full HD, 1920 x 1080 (2,073,.
Specifications Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 91 PRE L IMINAR Y General Dimen s ion s : 20.8" (530mm) L x 17.9" (455mm) W x 7.
Specifications 92 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual P RELI M INARY 7.2 LS-HB Dimensions Figure 7-1 shows the LS-HB dimens ions, in inches and [millimeters]. Figure 7-1. L S -HB Dimen s ion s 7.13 181.03 3.40 86.32 .49 (MIN) 12.50 6.
Specifications Runco LS-H B/LS-HB Ultra Install ation/Operation Manual 93 PRE L IMINAR Y 7.3 Supported Timings Table 7-2 lists the signal types support ed by each input on the LS-HB.
Specifications 94 Runco LS-HB/LS- HB Ultra In stallation/Operation Manual P RELI M INARY 1080/50p 1920x1080 50.00 56.250 1 48.500 √√ √ – 1080/60p 1920x1080 59.94/60.00 67.433/67.50 0 148.350/148.500 √√ √ – NTSC 3.58 – 59.94/60. 00 15.
.
Runco International • (800) 23RUNCO • Fax (503) 748-8161 • www.runco.com 020-1093-01 Rev. A October 201 1.
Ein wichtiger Punkt beim Kauf des Geräts Runco LS-HB Ultra (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Runco LS-HB Ultra noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Runco LS-HB Ultra - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Runco LS-HB Ultra reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Runco LS-HB Ultra erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Runco LS-HB Ultra besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Runco LS-HB Ultra verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Runco LS-HB Ultra. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Runco LS-HB Ultra gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
