Benutzeranleitung / Produktwartung LS-3 Series des Produzenten Runco
Zur Seite of 106
LS-3 Series LS-5 Series Home Theater Projectors LS-3 LS-3/CineWide™ LS-5 LS-5/CineWide™ I NSTALLATION /O PERATION M ANUAL.
.
Runco LS-3/LS-5 Install ation/Operation M anual iii PRE L IMINAR Y RuncoCare™ Standard Two Year Limited Warranty Congratulations o n your purchase of a Runco® product ! With proper installation, se tup and care, you should enjoy many yea rs of unpara lleled video p erformance.
iv Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y In the event o f a product de fect, please fo llow the warra nty claim proc edure provided b elow: 1. The Custome r is required to contact a Runco dealer or Runco Te chnical Suppor t via email at sup port@runco.
Runco LS-3/LS-5 Installation/Operation Manual v PRE L IMINAR Y j Failure to follow mainten ance procedu res as outline d in the pro duct’s user g uide where a schedule is spec ified for regular clea.
vi Runco LS-3/LS- 5 Instal lation/Operation Manual PRE L IMINAR Y RUNCO’S MAXIMUM AGGREGATE LIABILITY HEREUNDER IS LI MITED TO THE COST OF REPAIR OR REPLACEMENT OF THE PRODUCT.
Runco LS-3/LS-5 Installation/Operation Man ual vii PRE L IMINAR Y Thank you fo r your purchase of this qualit y Runco video product! Fo r the best pe rformance, please read this m anual carefully as it is your guid e through the menus and ope ration. 1.
viii Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y 19. Never look directly into t he lens when the lamp is on. Manufacturer’s Name: Runco International, LL C Manufacture r’s Addre.
Runco LS-3/LS-5 Installation/Operation Manual ix PRE L IMINAR Y NOTE: This equipment has b een tested a nd found to comply with th e limits for a C lass B digital device, pursua nt to Part 15 o f the FCC Rules. T hese limits ar e designed to p rovide reasonab le protection ag ainst harmful inter ference in a resid ential installation.
x Runco LS-3/LS-5 Installa tion/Operation Manual PRE L IMINAR Y Notes:.
Runco LS-3/LS-5 Installation/Operation Manual xi 1 Table of Contents PRE L IMINAR Y RuncoCare™ Standa rd Two Year Limited Warranty ........... .................... ................... . iii Important Safety Ins tructions ...... ............. .......
Table of Contents xii Runco LS-3/LS- 5 Instal lation/Operation Manual PRE L IMINAR Y Mounting the LS-3 /LS-5 ............ ............. ................ ................. ................ ............. ...... 23 Floor Mounting (Upright) ............. .
Table of Contents Runco LS-3/LS-5 Installation/Operation Manual xiii PRE L IMINAR Y 6. Serial Communic ations ................ ................ ................ ............. ................ ............. 71 RS-232 Connection and Port Configuratio n .
Table of Contents xiv Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y Notes:.
Runco LS-3/LS-5 Installation/Operation Manual xv 1 List of Figures PRE L IMINAR Y 2-1. LS-3/LS-5 F ront/Side View ........ ................. ................ ................ ............. ................ ..... 5 2-2. LS-3/LS-5 R ear/Bott om/Top View .
List of Figures xvi Runco LS-3/LS- 5 Instal lation/Operation Manual PRE L IMINAR Y Notes:.
Introd uction Runco LS -3/LS-5 Inst allation/Ope ration M anual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s M anual describe s how to install, set up and opera te the Runco LS-3/LS-5 Digital Light Processing ( DLP™) Projector.
Introduc tion 2 Runco L S-3/LS-5 Installa tion/Operation Manu al PRE L IMINAR Y Graphic Convention s: These symb ols appear in num erous places throughout the manual, to emp hasize points th at you must k eep in mind to a void problems wit h your equipment o r injury: 1.
Introd uction Runco LS -3/LS-5 Inst allation/Ope ration M anual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits Elegant and ele ctrifying, the LightS tyle™ Series LS-3/LS-5 Ho me Theater Pr ojector is Runco’s first-ever 1080p projec tor designed for both pe rformance and esthetics.
Introduc tion 4 Runco L S-3/LS-5 Installa tion/Operation Manu al PRE L IMINAR Y Key Features and Benefits The LS-3/LS-5 of fers these key f eatures and ben efits: • Native Resolution: 1920 x 108 0 (.
Controls and Functi ons Runco LS -3/LS-5 Inst allation/Ope ration M anual 5 PRE L IMINAR Y 2.1 LS-3/LS-5 at a Glance Figure 2-1 and Figure 2-2 show the key LS-3/LS-5 compone nts. Figure 2-1. LS-3/LS-5 Front/Side View • TOP IR SENSOR Receives infrare d signals from the remo te control unit .
Controls and Functions 6 Runco L S-3/LS-5 Installa tion/Operation Manu al PRE L IMINAR Y • ZOOM RING Rotate this to change the pr ojected ima ge size. • FRONT IR SENSOR Receives infrar ed signals fro m the remote co ntrol unit. • INT AKE VENT Internal fans d raw cool air in to the projecto r through this ve nt.
Controls and Functi ons Runco LS -3/LS-5 Inst allation/Ope ration M anual 7 PRE L IMINAR Y Figure 2-2. LS-3/LS-5 Rear/Botto m/Top View 2 6 3 7 1 5 4.
Controls and Functions 8 Runco L S-3/LS-5 Installa tion/Operation Manu al PRE L IMINAR Y 1. RUNCO LOGO BADGE Remove to access the lens shift controls. 2. REAR COVER Remove to acce ss connectors . 3. LAMP MODULE COVER Remove this cover to ac cess the lamp compa rtment.
Controls and Functi ons Runco LS -3/LS-5 Inst allation/Ope ration M anual 9 PRE L IMINAR Y 2.2 LS-3/LS-5 Rear Panel Figure 2-3 shows the LS-3/LS- 5 rear panel. Figure 2-3. LS-3/LS-5 Rear Panel 1. HDMI 1 (Digital) HDMI 2 (Digital) HDCP-compliant digital v ideo inputs for co nnecting an HDM I or DVI source.
Controls and Functions 10 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y 7. S-VIDEO A standard S-Video input for connecting a DVD player, sate llite receiver or Super VHS (S-VHS) VCR. 8. IR INPUT Wired input from a Niles- or Xantech-co mpatible, infrared (I R) repeat er system.
Controls and Functi ons Runco LS-3/LS-5 Installation/Operation Man ual 11 PRE L IMINAR Y 2.3 LS-3/LS-5 Remote Control 1. ON Use this button to turn the projecto r on. 2. OFF Use this button to turn the projecto r off. 3. Source Sele ction Buttons (1-5): Press to select a vide o source.
Controls and Functions 12 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y 8. Picture Adjustment Buttons: Contrast Press to adjust white level. Brightness Press to adjust black level. Sharpness (SHARP) Press to adjust sharpness. Gamma (GAMMA) Press to select a gamma curve.
Installation Runco LS-3/LS-5 Installation/Operation Man ual 13 PRE L IMINAR Y 3.1 Remote Control To install batteries in the remote co ntrol: 1. Slide the bat tery compartm ent cover in t he direction o f the arrow to remove it. 2. Install two AA batt eries with the correct polarity.
Installation 14 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y • The projector’ s front IR receiver has a ra nge of approxim ately 40 feet (12. 19 meters); the top IR re ceiver has a range of ap proximately 20 feet (6.1 0 meters). Figure 3-1 shows the rec eption angles of the front an d top IR rece ivers.
Installation Runco LS-3/LS-5 Installation/Operation Man ual 15 PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a qui ck overview of the LS-3/LS-5 in stallation process. The sections following this one pr ovid e detailed instru ctions. Installation shou ld be performed by a quali fied custom video installation specialist.
Installation 16 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y 3.3 Installation Considerations Proper insta llation of your p rojector will e nsure the qu ality of your display.
Installation Runco LS-3/LS-5 Installation/Operation Man ual 17 PRE L IMINAR Y Ambient Light In general, minimize or eliminat e light so urces direct ed at the sc reen. Contrast ratio in your images will be noticeably reduc ed if light directly st rikes the screen, such as when a sh aft of light from a window o r floodlight falls on the image.
Installation 18 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y Table 3-3 lists th e available LS-3/LS-5 Series lens options a nd their associate d throw ratios.
Installation Runco LS-3/LS-5 Installation/Operation Man ual 19 PRE L IMINAR Y Lens Shift You can use th e lens shift cont rols on the pro jector to center the image on the screen. Lens shift is generally exp ressed as a p ercentage of the screen he ight or width, as shown in Figure 3-4 and Figure 3-5 .
Installation 20 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y Figure 3-5. Horizontal Lens Shift (Example Only) 1. With no vertical or horizontal lens shift, the lens center and screen cent er are align ed with each ot her. 2. Vertical shif t limits are pe rcentages o f the screen h eight.
Installation Runco LS-3/LS-5 Installation/Operation Man ual 21 PRE L IMINAR Y Folded Optics In rear-screen applications where space behind the projector is lim ited, a mirror may be used to fold th e optical pa th, as shown in Figu re 3-6 . The posit ion of the pr ojector an d mirror must be accurate ly set.
Installation 22 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y Installing the Fixed CineWide Base Plate To install the fixe d CineWide base plate on a LS-3/LS-5 /CineWide with a prismati c anamorphic lens : 1. Place the pro jector upside d own on a bla nket or othe r soft surface .
Installation Runco LS-3/LS-5 Installation/Operation Man ual 23 PRE L IMINAR Y 3.5 Mounting the LS-3/LS-5 There are se veral methods fo r mounting t he projector.
Installation 24 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y 3.6 Connections to the LS-3/LS-5 Proceed as follows t o connect the LS-3 /LS-5 to your video so urces, extern al controller(s) – if present – and AC power. When connec ting your equipm ent: • Use the correc t signal cables for each source .
Installation Runco LS-3/LS-5 Installation/Operation Man ual 25 PRE L IMINAR Y Connecting Source Components to the LS-3/LS-5 Connect your vid eo sources to the LS-3/LS-5 as shown a nd described in the sections that follow. HDMI/DVI Connections: See Figure 3-8.
Installation 26 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y RGB Connections: Connect your per sonal compu ter or ot her RGB sour ce to th e RGB input.
Installation Runco LS-3/LS-5 Installation/Operation Man ual 27 PRE L IMINAR Y Compone nt Video Conn ections: Connect your c omponent video sources to the COMPONENT 1/SCART , COMPONENT 2 (LS-5 on ly) or RGB inputs as shown in Figure 3-10 . Figure 3-10.
Installation 28 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y Composite/S-Video Connections: Connect your Compos ite and S-Video so urces to the LS-3/LS-5 as shown in Figure 3-11 . Figure 3-11. Composite and S- Video Connections DVD Player, VCR, Satellite Receiver, Laser Disc etc.
Installation Runco LS-3/LS-5 Installation/Operation Man ual 29 PRE L IMINAR Y RS-232 Controller Connection Connect a PC o r home theate r control/au tomation syste m (if present) t o the RS-232 por t on the LS-3/LS-5; see Figure 3-12. Use a standa rd, 9-pin seri al cable, wir ed straight-through .
Installation 30 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y Connecting 12-Volt Trigger Output to External Theater Equipment If your home th eater contain s a retractab le screen, screen mask o r other 12-volt trigger-act ivated equipme nt, connect it to the 12-volt trigger output (s) as shown in Figure 3-13 .
Installation Runco LS-3/LS-5 Installation/Operation Man ual 31 PRE L IMINAR Y Connecting to AC Power The LS-3/LS-5 ships with var ious types of AC p ower cords. C hoose the one t hat is appropriate to your loca le. Plug the female end of the p ower cord into the AC receptacle o n the rear o f the project or (AC 100V ~ 240V); see Figure 2-3 .
Installation 32 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y Vertical Lens Shift: To shift the projected image vertic ally, insert the pro vided hex wrench into the hole at the top o f the projecto r (directly abo ve the lens) . Then, tu rn the wrench as sho wn to shift the lens in the desired direction .
Installation Runco LS-3/LS-5 Installation/Operation Man ual 33 PRE L IMINAR Y 3.9 Changing the OSD Language When you turn on the LS-3/LS-5 for the first t ime, the OSD La nguage Menu a ppears.
Installation 34 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y 3.11 Installing and Adjusting the CineWide Anamorphic Lens If you are installing an LS-3/L S-5LT/CineWide, proceed as follows to install and adjust the anamorphic lens . The CineWide an amorphic lens m ount kit consists of everything sho wn in Figure 3- 15.
Installation Runco LS-3/LS-5 Installation/Operation Man ual 35 PRE L IMINAR Y 1. Use the Height/Pit ch Adjustment Scre ws ( 3 ) and Washer s ( 2 ) to attach the Lens Mounting Bracket ( 5 ) to the Anamorphic Lens ( 1 ). 2. Remove the nut and rubber collar from ea ch Swell Latch Asse mbly ( 4 ).
Installation 36 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y 4. Then, adjust the anamorph ic lens angle so that t he projected im age is rectangu lar: The anamorphic lens will almost always be angled with respect to the projector; th is is normal.
Operation Runco LS-3/LS-5 Installation/Operation Man ual 37 PRE L IMINAR Y 4.1 Selecting Video Memory Press M1, M2 or M3 to recall settings fro m a memory p reset. Then, press ENTER to confirm your sele ction. Or, to cancel the op eration, pre ss to select Cancel and press ENTER .
Operation 38 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y 4.4 Using Picture-In-Picture (PIP) For PIP purpo ses, there are three grou ps of inputs separated by th eir displa y modes: • Video (SD) group: Video, S-Video an d SCART inputs.
Operation Runco LS-3/LS-5 Installation/Operation Man ual 39 PRE L IMINAR Y 4.5 Using the On-Screen Menus 1. Press the MENU button on the remote control or system keypad to display the Main Menu. 2. There are six menus. Pr ess or to selec t a sub-menu.
Operation 40 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y Figure 4-1. LS-3/LS-5 OSD Menu Structure Main Aspect Ratio 16:9, 4: 3, Letter box, 4:3 Narrow or Native Memory Recall Memory Save Settings Save ISF Brightness 0 .
Operation Runco LS-3/LS-5 Installation/Operation Man ual 41 PRE L IMINAR Y Main The LS-3/LS-5 Ma in Menu, show n in Figu re 4-2, provides a ccess to the most commonly-used p rojector func tions.
Operation 42 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y Aspect Ratio: To change the asp ect ratio (size and shap e) of the projec ted image, press or to highlight Aspect Ra tio .
Operation Runco LS-3/LS-5 Installation/Operation Man ual 43 PRE L IMINAR Y Letterbox Letterbox mode scales (zooms in on) a 4:3 image linearly (by the same amount on all sides) to fill a 16:9 display, cropping the top and bottom of the image.
Operation 44 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y Native Select Native to display the source si gnal in its native reso lution, centered in the display area with no re-sizing or overscan.
Operation Runco LS-3/LS-5 Installation/Operation Man ual 45 PRE L IMINAR Y Memory: Select Memory fr om the Main me nu, then press ENTER to recall image quality settings previously saved, or to save changed sett ings in any of four memory lo cations.
Operation 46 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y Brightness: On your external te st pattern so urce, select a PLUG E pattern. (PLUG E is an acronym for “Pict ure Line-Up Gene ration Equipment .”) Figure 4- 3 shows a typical PLUGE pattern.
Operation Runco LS-3/LS-5 Installation/Operation Man ual 47 PRE L IMINAR Y Color: To adjust the overall color intensity, se lect Color from the Main menu. Decr ease this setting if c olors are overly saturated ; increase it if c olors appear m uted or was hed out.
Operation 48 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y • Sharpness Mode: Sharpness Mod e allows or preve nts access to the detailed sharpness contro ls in this menu. In most cases, Simple mode provides a suffic ient level of cont rol to produce the best picture fr om the most pop ular sources.
Operation Runco LS-3/LS-5 Installation/Operation Man ual 49 PRE L IMINAR Y Overscan: Some television prog rams are produc ed based on the assumpt ion that older television sets may not display the oute r edge s of the broad cast pictur e area. Overscan effectively hide s these inactive, outer edges o f the image .
Operation 50 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y The default so urce selection is HDMI 1 . All sources that are not availab le per the sourc e enable functio n (refer to Source Enable on page 58 ) are grayed ou t. Figure 4-7.
Operation Runco LS-3/LS-5 Installation/Operation Man ual 51 PRE L IMINAR Y Advanced Use the contro ls in the Advan ced menu, sho wn in Figure 4- 8, to perform advanced ima ge adjustments.
Operation 52 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y Video Standard: Select Video Standard fr om the Adv anced menu to specify the color system for composit e video or S-Video input signals. Different coun tries use differen t formats for vid eo signals.
Operation Runco LS-3/LS-5 Installation/Operation Man ual 53 PRE L IMINAR Y DLP Frame Rate: Select DLP Fr ame Rate from the Advanced menu to choos e the output fram e rate. You can have the LS-3/L S-5 automatically d etermine the op timum frame rate, or you can for ce it to use a specific frame rate.
Operation 54 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y SatCo: Select SatCo from th e Advanced m enu to enable ( On ) or disable ( Off ) BrilliantColor processing, which improves brightness in grays and secondary colors by using the spo ke light from t he color whee l.
Operation Runco LS-3/LS-5 Installation/Operation Man ual 55 PRE L IMINAR Y Fine Sync: To fine-tune the p osition and o ther image attributes, choose Fine Sy nc from the Advanced menu and press ENTER . This displ ays the Fine Sync sub -menu, shown in Figure 4-10 .
Operation 56 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y • Tracking (RGB or Component sources ): Tracking determines the frequency o f the pixel sampling cloc k, indicated by the number of incoming pixels per line, so that all pixels generate d by a partic ular source are sampled.
Operation Runco LS-3/LS-5 Installation/Operation Man ual 57 PRE L IMINAR Y System Use the controls in the System me nu, shown in F igure 4-11, to adjust the lamp , change the display orientat ion and perform oth er, common installati on tasks. Figure 4-11.
Operation 58 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y Source Enable: To enable or disable selection of a source, choose Sourc e Enable from the System menu and press ENTER . This displays the Source Enable sub-menu, shown in Figure 4-12 .
Operation Runco LS-3/LS-5 Installation/Operation Man ual 59 PRE L IMINAR Y PIP Position: To chang e the position of the PIP image, choose PIP Position from the System menu; see Figure 4-13 . Choose one of the following : • Top Left: This places the PIP source in to a 644x36 2 designated image area at the top left of the s creen.
Operation 60 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y Figure 4-14. PIP Split-Scre en Mode Menu Pos ition: Select Menu Position from t he System menu to ch ange the OSD me nu position.
Operation Runco LS-3/LS-5 Installation/Operation Man ual 61 PRE L IMINAR Y Control Select Control fr om the Main Menu to set various options re lated to control of the projector. 1 Key / 2 Key / 3 Key / 4 Key / 5 Key: These menu items assig n the functi on of the keys numbered 1 through 5 on th e remote.
Operation 62 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y • RS232 causes the po rt to output 12 volts when an RS232 screen trigger 1 “on” command is re ceived and stop when a t rigger 1 “off” command i s received. The 12 vo lt output also stop s when the p rojector is turne d off.
Operation Runco LS-3/LS-5 Installation/Operation Man ual 63 PRE L IMINAR Y Language Select Language fro m the Main M enu to chan ge the OSD Lang uage. The LS-3/LS-5 can displa y the menus in English, Frenc h, German, Italian, Spanish, Swedish, Traditio nal Chinese, Simplified Chinese, Jap anese, Korean , Portuguese or Russian.
Operation 64 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y Service Access the Service M enu, shown in Figure 4-15, to view information that u niquely identifies your p rojector and in.
Operation Runco LS-3/LS-5 Installation/Operation Man ual 65 PRE L IMINAR Y Lamp Hour Reset: When you replace th e projector lamp (refer to Lamp Replacement on page 67 ), you should also reset the la mp hour counter. To do this, select Lamp Hou r Reset from the Service menu, then press ENTER .
Operation 66 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y To turn test p atterns off, p ress any key other than or on the remote control unit or built-in keypad. Altitude: Select Altitude from the Servic e Menu to control the o peration of the projec tor’s cooling fan.
Maintenance and Troubleshooting Runco LS-3/LS-5 Installation/Operation Man ual 67 PRE L IMINAR Y 5.1 Lamp Replacement The lamp should be replac ed when it rea ches the end of its life (typ ically between 2000 and 4000 h ours dep ending on the Lamp Powe r setting), or soo ner if a noticea ble degradation in brightness occur s.
Maintenan ce and Trou bleshooting 68 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y 5.2 Troubleshooting Tips Table 5-1 provide s some general guidelines for troubleshootin g problems you may encounter with the LS-3/LS-5.
Maintenance and Troubleshooting Runco LS-3/LS-5 Installation/Operation Man ual 69 PRE L IMINAR Y Colors in the image are swapped; for example, reds appear blue or vice versa. •T h e R e d / P r , G r e e n / Y o r Blue/Pb outputs from t he source are connected to the wrong inputs on the LS-3/LS-5.
Maintenance and Troubleshooting 70 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y Notes:.
Serial Communications Runco LS-3/LS-5 Installation/Operation Man ual 71 PRE L IMINAR Y 6.1 RS-232 Connection and Port Configuration To interface the LS-3/LS-5 wi th a home theater automati on/control system or a PC running te rminal emulation software: 1.
Serial Communications 72 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y Table 6-1 lists t h e serial c ommand key names a nd IR codes. Table 6-1. Serial Command Key Names and IR Codes RS232 Keyname Remote Button IR Code Description Set 1 Set 2 pow.
Serial Communications Runco LS-3/LS-5 Installation/Operation Man ual 73 PRE L IMINAR Y gam.crt (none) 0x86 0xC6 Switch to CRT gamma. gam.film (none) 0x87 0xC7 Switch to Film gamma. gam.vide (none) 0x88 0xC8 Switch to Video gamma. gam.brig (none) 0x89 0xC9 Switch to Bright Room gamma.
Serial Communications 74 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y Operations Commands Operation s commands allow more flexible a nd direct cont rol of the pro jector. The synt ax for operations commands is as f ollows: op <operation> <command>[CR] (Precede <operation> an d <command> with a space.
Serial Communications Runco LS-3/LS-5 Installation/Operation Man ual 75 PRE L IMINAR Y Table 6-2 lists the valid operation s commands. For a ll but Execute fun ctions, the respon se from the pro jector is t he comman d and “= <value>” where <value> is the current v alue or “NA” if th e value is not av ailable.
Serial Communications 76 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y save.mem = 0 = User Memory 1 1 = User Memory 2 save.isf = 0 = ISF Day 1 = ISF Night bright = ? + - 0 - 200 contrast = ? + - 0 - 200 saturat = ? + - 0 - 200 tint = ? + - 0 - 20 0 sharp.
Serial Communications Runco LS-3/LS-5 Installation/Operation Man ual 77 PRE L IMINAR Y source.sel = ? 0 = HDMI 1 1 = HDMI 2 2 = RGB 3 = YPrPb 1 4 = YPrPb 2 5 = S-Video 6 = Video 7 = SCART pip.select = ? 0 = Off 1 = HDMI 1 2 = HDMI 2 3 = RGB 4 = YPrPb 1 5 = YPrPb 2 6 = S-Video 7 = Video 8 = SCART resync (execute) color.
Serial Communications 78 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y satco = ? 0 = Off 1 = Smooth ccont = ? 0 = Off 1 = On lens.aper = ? 0 = Closed 1 = Open red.off = ? + - 0-200 green.off = ? + - 0-200 blue.off = ? + - 0-200 red.gain = ? + - 0-200 green.
Serial Communications Runco LS-3/LS-5 Installation/Operation Man ual 79 PRE L IMINAR Y auto.pow.off = ? 0 = Off 1 = On auto.pow.on = ? 0 = Off 1 = On rear.proj = ? 0 = Off 1 = On ceil.mode = ? 0 = Off 1 = On 2 = Auto power.chime = ? 0 = Off 1 = On 1.key 2.
Serial Communications 80 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y act.source pip.source ? 0 = HDMI 1 1 = HDMI 2 2 = RGB 3 = YPrPb 1 4 = YPrPb 2 5 = S-video 6 = Video 7 = SCART h.refresh ? <number> kHz v.refresh ? <number> Hz pixel.
Serial Communications Runco LS-3/LS-5 Installation/Operation Man ual 81 PRE L IMINAR Y status ? 0 = Standby 1 = Powering Up 2 = Displaying 3 = Cooling Down 4 = Error errcode ? Refer to RS-232 Error Codes , below.
Serial Communications 82 Runco LS-3/LS-5 Inst al lation/Operation Manual PRE L IMINAR Y RS-232 Error Codes If an errcode ? command returns one of the followi ng values, you have encou ntered a likely system error requiring the attention of a qualified servic e technician.
Specifications Runco LS-3/LS-5 Installation/Operation Man ual 83 PRE L IMINAR Y 7.1 LS-3/LS-5 Specifications Table 7-1 lists the LS-3 /LS-5 specifications.
Specifications 84 Runco LS-3/LS-5 Inst al lation/Operation Manual P RELI M INARY Performance Microdisplay: Texas Instruments DLP® 1080p DMD Native Resolution: Full HD, 1920 x 1080 (2,073,600 pixels) Aspect Ratios: Native (Pixel-to-Pix el), 16:9, Letterbox , 4:3, 4:3 Narrow, Letterbox (Anamorphic lens compatible) Projection Lens: All glass, F/2.
Specifications Runco LS-3/LS-5 Installation/Operation Man ual 85 PRE L IMINAR Y General Dimensions: 20.8" (530mm) L x 17.9" (455mm) W x 7.8" (200mm) H (see Figure 7- 1 ) Weight (without lens): 24.
Specifications 86 Runco LS-3/LS-5 Inst al lation/Operation Manual P RELI M INARY 7.2 LS-3/LS-5 Dimensions Figure 7-1 shows the LS-3/LS- 5 dimensions, in millimeters.
Specifications Runco LS-3/LS-5 Installation/Operation Man ual 87 PRE L IMINAR Y 7.3 Supported Timings Table 7-2 lists the signal types suppo rted by each input on the LS-3/LS-5 .
Specifications 88 Runco LS-3/LS-5 Inst al lation/Operation Manual P RELI M INARY 1080/50p 1920x1080 50.00 56.250 148.500 √ √ √ – 1080/60p 1920x1080 59.94/60.00 67.433/67.500 148 .350/148.500 √ √ √ – NTSC 3.58 – 59.94/60.00 15.734/15.
.
Runco International • (800) 23RUNCO • Fax (503) 748-8161 • www.runco.com 020-1033-00 Rev. A November 2009.
Ein wichtiger Punkt beim Kauf des Geräts Runco LS-3 Series (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Runco LS-3 Series noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Runco LS-3 Series - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Runco LS-3 Series reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Runco LS-3 Series erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Runco LS-3 Series besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Runco LS-3 Series verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Runco LS-3 Series. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Runco LS-3 Series gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
