Benutzeranleitung / Produktwartung DR-300 des Produzenten Runco
Zur Seite of 29
O WNER ’ S O PERA TING M ANUAL DR-300 Digital Light Processing™ Projector www.htrgroup.com.
.
T able of Contents 1 INTRODUCTION Overall Description .......................................................................................... 2 Features and Benefits ..................................................................................
2 Intr oduction O VERALL DESCRIPTION Congratulations on your purchase of the DR-300 projector! The projector is a single-chip DLP™ pro- jector with native XGA (1024 x 768) resolution. It includes a bright 135W NSH lamp as its light source, and requires very little maintenance.
3 SAFETY PRECA UTIONS Please read and observe the following safety precautions when operating your DR-300 projector . • NEVER UNPLUG THE PROJECTOR WHILE IT IS STILL RUNNING! The lamp MUST have time to cool- always place the unit in ST ANDBY and let the fans cool the bulb before unplugging the unit.
4 LIMITED WARRANTY Congratulations on your purchase of a Runco video product and welcome to the Runco family! We believe Runco produces “The World’ s Finest Home Theater Product s”. With proper installation, setup and care, you should enjoy many years of unparalleled video performance.
5 EFFECTIVE W ARRANTY DA TE: This warranty begins on the effective date of delivery to the end user . For your convenience, keep the original bill of sale as evidence of the purchase date. IMPORT ANT : W ARRANTY REGISTRA TION: Please fill out and mail your warranty registration card.
6 INPUT P ANEL DESCRIPTION All connections are located on the underside of the unit. Please refer to the following drawing: Getting Star ted: DR-300 Pr ojector 1. RGB/Component/HD Input Connect RGB or component output from a high resolution source (computer , DTV decoder , progressive DVD player , etc.
7 REMO TE CONTROL The remote control controls all operations of the DR-300. It uses discreet On/Off commands, discrete source selection commands and other simple controls. 1. OFF: T urns the projector off. 2. ON: T urns the projector on. 3. VIDEO: Select s Composite Video as the source.
8 PROJECT OR PLA CEMENT AND OFFSET INFORMA TION Screen Center Screen T op Projector Base angle C B A Full Screen Length Half Screen Length 6.090 2.842 1.745 Base plate to center of lens 1.895 3.398 Screen Center Screen T op Projector Base angle C B A Full Screen Length Half Screen Length 1.
9 Oper a tion: DR-300 Pr ojector MENU TREE The menu system of your DR-300 is comprised of three sections- the MAIN menu, the SUB MENUS and the adjustable ITEMS. Please note that not all items will work for all types of input s; items in italics are for service personnel only .
10 ASPECT RA TIO ASPECT RA TIO allows you to 'shape the image' properly , and is dependent on the type of source you are using. For example, most DVDs are recorded in Anamorphic, and Laser disc movies were almost all letterbox.
The way we create a widescreen (or LETTERBOX) aspect ratio is to take a full 4:3 image, then 'blank' (or cut off) the top and bottom so the displayed image is in a widescreen format. For movies recorded in 'letterbox', there would be no information above and below the screen anyways, so we're not losing any of the picture.
12 SOURCE SELECT There are two options for selecting a source. Y ou may either press one of the source buttons on the remote, or by pressing MENU and highlighting SOURCE SELECT . When the SOURCE SELECT menu appears, highlight the desired source and press either the right arrow or the ENTER button.
13 PICTURE ADJUSTMENTS CONTRAST : Increases the white level of the image. This should normally be set approximately mid- range. If this is increased too high, you may notice 'blooming', where the brightest areas of the image may bloom together causing a loss of definition in bright scenes.
14 IMAGE OPTIONS The image options menu is where you can adjust various aspects of the image, including KEY- STONE, SHIFT , etc. These functions are described below .
SHIFT / BLANKING The SHIFT and BLANKING functions allow you to properly size and 'blank' (or 'Crop') the image to fit the screen properly . SHIFT allows you to make minor adjustments to the position of the image horizont ally or vertically .
16 COLOR MAN AGEMENT The COLOR MANAGEMENT menu allows you to make changes that affect the quality and overall color balance of the image. Three types of adjustment s area available and are described below . GAMMA CORRECTION changes the overall tracking of the grey scale.
17 PROJECT OR OPTIONS The projector options menu allows you to make adjustments to a number of projector functions. The MENU options allow you to make adjustments to the on-screen menu such as display time, menu items, etc. MENU OPTIONS There are two pages of the menu options menu.
18 SETUP OPTIONS The SETUP portion of the PROJECTOR OPTIONS menu controls various global aspects of the pro- jector's functions. This menu cont ains five pages, and are described below: On P AGE 1 , the following may be adjusted: ORIENT A TION changes the image orientation.
19 P AGE 3 of the SETUP OPTIONS menu is where signals can be set for auto-select, or manually set for one of a number of types of signals exclusively . T ypically , all of these adjustments should be left in AUTO unless using a questionable source such as a VCR.
20 P AGE 5 The last page of the setup menu is where the screen type is defined (4:3 screen, 16:9 screen, 16:9 screen with an anamorphic lens) as well as default source selection. DEFINE SCREEN TYPE: This is where you tell the projector what aspect ratio screen you are using, and whether or not you are using an anamorphic lens.
21 T OOLS: For service personnel only . This is for aiding the service technician with software downloads and diagnostics. It does not serve any purpose for normal operation.
22 T r oubleshooting TROUBLESHOO TING Y our DR-300 projector is a very reliable, low maintenance projector . Occasionally , trouble may develop. However , before calling your Runco dealer for service, please refer to the fol- lowing basic troubleshooting guide: Projector does not turn on.
RS-232 CONTROL CODES Function Code Data POWER ON 02H 00H 00H 00H 00H 02H POWER OFF 02H 01H 00H 00H 00H 03H INPUT SELECT RGB/COMPONENT 02H 03H 00H 00H 02H 01H 01H 09H INPUT SELECT VIDEO 02H 03H 00H 00H.
DR-300 Pr ojector Dimensions 13.211 4.028 3.398 16.186 T op View F ront V iew Side View Status Power 24.
DR-300 Projector : Specifica tions 25 Projector T ype: Digital Light Processing™ (DLP)™ Native Resolution: Native 1024 x 768, Widescreen 1024 X 576 Video S t andards: NTSC, (P AL/NTSC Internationa.
.
RUMA-006900 rev 1 1-01 Runco International • 2463 T ripaldi W ay • Hayward, CA 94545 • ph (510) 293-9154 • fax (510) 293-0201 • www .runco.com.
Ein wichtiger Punkt beim Kauf des Geräts Runco DR-300 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Runco DR-300 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Runco DR-300 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Runco DR-300 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Runco DR-300 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Runco DR-300 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Runco DR-300 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Runco DR-300. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Runco DR-300 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
