Benutzeranleitung / Produktwartung RS910W des Produzenten RuggedCom
Zur Seite of 31
RuggedCo m Inc. I 30 Whitmore Road, Woodbridg e, Ontario, C anada L4L 7Z4 Tel: (905) 85 6-5288 I Fax: (905) 856-19 95 I Tol l Free: (888) 26 4-0006 Rugged Rugged Rugged Rugged Wireless Wireless Wirele.
2 2007 RuggedCo m Inc. All rights reser ved Rev100 Federal Communicati ons Commission Radio Frequency Inter ference Statem ent This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules.
3 2007 RuggedCo m Inc. All rights reser ved Rev100 Table of Contents 1 Product Overview ............................................................................................................................... 5 1.1 Functional Overview .....
4 2007 RuggedCo m Inc. All rights reser ved Rev100 Table of Figures Figure 1 - RS910W Front Pa nel Descrip tion.............................................................................................. 6 Figure 2 - RS910W Bottom Panel Descrip tion .
5 2007 RuggedCo m Inc. All rights reser ved Rev100 1 Product O verview 1.1 Functional Ove rview The RuggedWireless™ R S910W is an industrially hardened Wireless Serial/Ethe rnet Device Server that h as be en specifically designed to o perate reliably in electrically harsh a nd climatically demanding environments.
6 2007 RuggedCo m Inc. All rights reser ved Rev100 1.3 RS910W Front P anel Descript ion Failsafe Relay Power Port Ports 1 & 2 RS485/422/232 Serial Or Serial over Fiber Ports 3 & 4 10/100Ba.
7 2007 RuggedCo m Inc. All rights reser ved Rev100 1.4 RS910W Bottom P anel Description Failsafe Relay Console Port Power Port Chassis Ground Optional Din-Ra il Mounting Brack et Figure 2 - RS910W.
8 2007 RuggedCo m Inc. All rights reser ved Rev100 2 Inst allation 2.1 Din Rail Mounting An optional DIN rail mounting bracket is available for the RS910W.
9 2007 RuggedCo m Inc. All rights reser ved Rev100 2.2 Power Supp ly Wiring and Grou nding 2.2.1 A C Power Suppl y Wiring and Groundi ng Figure 4 - RS910W Power Supply In puts The RS910W AC power supply inputs should be connected as follows: 1. +/L should be connected to AC Line/Hot.
10 2007 RuggedCo m Inc. All rights reser ved Rev100 2.2.2 DC Power Suppl y Wiring and Groundi ng Figure 5 - DC Power sup ply wiring and grounding diagram The RS910W low voltage DC power supply features reverse polarity protection and dual independent inputs.
11 2007 RuggedCo m Inc. All rights reser ved Rev100 2.2.3 Dielectric Strength Testing Units which are to have dielectric strength testing (HIPOT testing) done in the field must have the braided ground cable disconnected during the test.
12 2007 RuggedCo m Inc. All rights reser ved Rev100 2.3 Failsafe Output W iring The Failsafe output relay is provided to signal critical error cond itions that may occur on the RS910W. The contacts are energized upon power up of the unit and remain energized until an alarm condition or power loss occurs.
13 2007 RuggedCo m Inc. All rights reser ved Rev100 2.4 RS232 Conso le Port Wiring The RS232 port is used for configuring the RS910W. A straight-through serial cable with a DB-9 connector is required. There is no need to crossover the TxD and RxD signals from the PC side since this has been done internally as is shown in the figure below.
14 2007 RuggedCo m Inc. All rights reser ved Rev100 3 Serial Port s The RS910W can be equipped with a Fiber Serial Interface, RS232/RS485/ RS422 D B9 serial ports or RS232/RS485/RS422 RJ45 serial ports.
15 2007 RuggedCo m Inc. All rights reser ved Rev100 Pi n R S23 2 Mode R S48 5 Mode R S42 2 Mode 1 C D - - 2 T X T X / R X + ( A) T X + 3 R X - R X + 4 D T R - - 5 6 D SR - RX - 7 C T S T X / R X -.
16 2007 RuggedCo m Inc. All rights reser ved Rev100 Pi n R S232 Mode R S48 5 Mode R S42 2 Mode 1 D SR - RX - 2 D C D - - 3 D T R - - 4 5 R X - R X + 6 T X T X /RX + (A) T X + 7 C T S - - 8 R T S T.
17 2007 RuggedCo m Inc. All rights reser ved Rev100 Figure 12: Co nceptual recom mended RS485 wiring d iagram 3.1.5 Serial Port Transie nt Protection RuggedCom does not recommend the use of copper cabling of any length for critical real-time substation automation applications.
18 2007 RuggedCo m Inc. All rights reser ved Rev100 4 Ethernet Port s 4.1 RJ45 Ethernet Por ts The RS910W has several 10/100Base-TX ports that allow connection to standard category 5 (CAT-5) unshielded twisted-pair (UTP) cable with RJ45 male connectors.
19 2007 RuggedCo m Inc. All rights reser ved Rev100 RuggedCom also does not recommended to use these ports to interface to field devices across distances which could produce high levels of ground potential rise, (i.e. greater than 2500V) during line to ground fault conditions.
20 2007 RuggedCo m Inc. All rights reser ved Rev100 Figure 19: Eth ernet panel LED de scription.
21 2007 RuggedCo m Inc. All rights reser ved Rev100 5 T echnical Specifications 5.1 Operating Envi ronment Parameter Range Comment s Ambient Operating Tem perature -40 to 85 ° C Ambient Temperatu re as measured from a 30 cm radius surrounding the ce nter of the RS910W enclosure.
22 2007 RuggedCo m Inc. All rights reser ved Rev100 5.4 Wireless Standard s Supported Standard P arameter Mode Notes IEEE 802.11g 54 Mbps (WLAN) Full Access Point 2.4 Ghz ISM IEEE 802.11b 11 Mbps (WLAN) Client support Backwards compatibility IEEE 802.
23 2007 RuggedCo m Inc. All rights reser ved Rev100 Regulatory Dom ains Channel Ide ntifier Frequency (in MHz) America (-A) EMEA (-E) Japan (-J ) Rest of World (- W) 1 2412 X X X X 2 2417 X X X X .
24 2007 RuggedCo m Inc. All rights reser ved Rev100 5.7.2 Fiber Optic Ports Parameter Specifications Mode Multimode Connector ST Typical Dist. (km) 5 Optical Wavelength (nm) 820 Cable Size Core/Cladding (um) 50/125 62.5/125 Table 10: F iber Optic Port Specific ation NOTES: 1.
25 2007 RuggedCo m Inc. All rights reser ved Rev100 Speed Standard Mode / Connecto r Tx λ λ λ λ (nm) Cable Type 2 ( µ µ µ µ m) Tx Pwr (dBm peak ) 3 (Min / Max) Rx Sensitivity (dBm Average) 3 Rx Saturation (dBm Peak) 3 Typical Distance (km) 1 Power Budget (dB) 100Base-FX MM / ST 1310 5 0/125 -15.
26 2007 RuggedCo m Inc. All rights reser ved Rev100 5.10 Mechanical Specif ications Figure 20 - M echanical Specif ications Table 14 - M echanical Specif ications Parameter Value Dimensions 16.8 x 11.7 x 6.6 cm / 6.6 x 4.6 x 2.6 i nches Weight 1.2 kg / 2.
27 2007 RuggedCo m Inc. All rights reser ved Rev100 6 T ype T est s 6.1 IEC 61850-3 Type Tests Test Description Test Levels Severity Levels Enclosure Contact +/- 8kV 4 IEC 61000-4-2 ESD Enclosure Air +/- 15kV 4 IEC 61000-4-3 Ra diated RFI Enclosure ports 20 V/m x Signal ports +/- 4kV @ 2.
28 2007 RuggedCo m Inc. All rights reser ved Rev100 6.2 IEEE 1613 Type T ests Test Description Test Levels Enclosure Contact +/- 8kV IEEE C37.90.3 ESD Enclosure Air +/- 15kV IEEE C37.90.2 Ra diated RFI Enclosure ports 35 V/m Signal ports +/- 4kV @ 2.
29 2007 RuggedCo m Inc. All rights reser ved Rev100 7 W arrant y RuggedCom warrants this product for a period of five (5) years from date of purchase. For warranty details, visit http://www.ruggedcom.com or contact your customer service representative.
30 2007 RuggedCo m Inc. All rights reser ved Rev100 8 Appendix A - R uggedWireless ™ Frequen tly Asked Questions (F AQ) What factors can affect wireless coverage/range? Range e stimates are typical and require line of sight. Basically that means you will n eed a clear unobstructed view o f the ante nna fr om the rem ote point in the link.
31 2007 RuggedCo m Inc. All rights reser ved Rev100 dBm Watts dBm Watts dBm Watts 0 1.0 mW 16 40 mW 32 1.6 W 1 1.3 mW 17 50 mW 33 2.0 W 2 1.6 mW 18 63 mW 34 2.5 W 3 2.0 mW 19 79 mW 35 3.2 W 4 2.5 mW 20 100 mW 36 4.0 W 5 3.2 mW 21 126 mW 37 5.0 W 6 4 mW 22 158 mW 38 6.
Ein wichtiger Punkt beim Kauf des Geräts RuggedCom RS910W (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie RuggedCom RS910W noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für RuggedCom RS910W - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von RuggedCom RS910W reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über RuggedCom RS910W erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon RuggedCom RS910W besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von RuggedCom RS910W verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit RuggedCom RS910W. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei RuggedCom RS910W gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
