Benutzeranleitung / Produktwartung m2200 des Produzenten RuggedCom
Zur Seite of 29
RuggedCom Inc. I 30 Whitmore Road, Woodbridge, Ontario, Canada L4L 7Z4 Tel : 905-856-5288 I Fax : 905-856-1995 I Toll Free: 1-888- 264 -0006 RuggedSwitch ™ M2200 MIL-STD 9-Port Modular Managed Gigabit Ethernet Switch Installation Guide www.RuggedCom.
2 © 2008 RuggedCom Inc. All rights re served Rev105 Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules.
3 © 2008 RuggedCom Inc. All rights re served Rev105 T able of Contents 1 Table of Figur es ............................................................................................................... ....... 4 2 Table of Tables ...................
4 © 2008 RuggedCom Inc. All rights re served Rev105 1 T able of Figures Figure 1: Ethernet panel LED de scription...................................................................................... .. 7 Figure 2: 1000BaseX LC connector ............
5 © 2008 RuggedCom Inc. All rights re served Rev105 3 Product Overview 3.1 Functional Overview & Feature Highlights The RuggedSwitch M2200 is a MIL-STD hardened, fully managed, modular Gigabit Ethernet switch specifically designed to operate reliabl y in harsh environments.
6 © 2008 RuggedCom Inc. All rights re served Rev105 • Fully integrated, dual-redundant (optional) power supplies • Universal high-voltage range: 88-300VDC or 85-264VAC • Popular low voltage DC .
7 © 2008 RuggedCom Inc. All rights re served Rev105 3.2 Ethernet Panel Description Each Ethernet module is equipped with two LEDs that indicate link/activity status information. The LED will be solid for ports with link, and wi ll blink for activity.
8 © 2008 RuggedCom Inc. All rights re served Rev105 3.2.1 Fiber Optical Transceive r Orientation and Connection Depending on the order code of the product, the M2000 series products can be equipped with different types of fiber optic ports.
9 © 2008 RuggedCom Inc. All rights re served Rev105 3.3 Display Panel Description The M2000 series products are equipped with a versatile display panel, shown in Figure 3, which is designed to provide quick status information for eac h port, as well as the entire device to allow for simple diagnostics and troubl eshooting.
10 © 2008 RuggedCom Inc. All rights re served Rev105 The port-based LEDs can be cycled between three display modes: Status, Duplex, and Speed. Pushing the mode button causes t he display mode to be cycled.
11 © 2008 RuggedCom Inc. All rights re served Rev105 4 Inst allation 4.1 Panel Mounting The M2000 series products can be ordered with Panel mount chassis. This option involves the use of the panel adapters to be mounted on each side of the chassis enclosure.
12 © 2008 RuggedCom Inc. All rights re served Rev105 4.2 Power Supply Wiring and Grounding Figure 5: M2000 Series Philips Screw Terminal Block The M2000 Family supports dual redundant power s upplies – “Power Supply 1 (PS1)” and “Power Supply 2 (PS2)”.
13 © 2008 RuggedCom Inc. All rights re served Rev105 Terminal # Description Usage 1 PS1 Live / + PS1 Live / + is connected to the posit ive (+) terminal if the power source is DC or to the (Live) terminal if the power source is AC. 2 PS1 Surge Ground PS1 Surge Ground is connected to the Chassis Ground via a jumper on the terminal blo ck.
14 © 2008 RuggedCom Inc. All rights re served Rev105 4.2.1 AC Power Supply Wiring Ex am ples Figure 6: AC Power supply wiring examples NOTES: 1. 100-240VAC rated equipment: A 250VAC appropria tely rated circuit breaker must be installed within 3m of unit.
15 © 2008 RuggedCom Inc. All rights re served Rev105 4.2.2 DC Power Supply Wiring Ex am ples Figure 7: DC Power supply wiring examples NOTES: 1. 88-300VDC rated equipment: A 300VDC appropria tely rated circuit breaker must be installed within 3m of unit.
16 © 2008 RuggedCom Inc. All rights re served Rev105 4.2.3 Dual Power Suppl ies – DC and AC Inputs Figure 8: DC And AC power supply wiring examples NOTES: 1. 88-300VDC rated equipment: A 300VDC appropria tely rated circuit breaker must be installed within 3m of unit.
17 © 2008 RuggedCom Inc. All rights re served Rev105 4.3 Dielectric Strength (HIPOT) Testing For dielectric strength (HIPOT) testing in the fiel d, users must remove the metal jumper located on terminal 2, 4, and 6 of the power supply terminal block.
18 © 2008 RuggedCom Inc. All rights re served Rev105 4.4 Failsafe Alarm Relay Wiring and Specifications The “Failsafe” output relay is provided to signal critical error conditions that may occur on the M2000 series products. The contacts are energi zed upon power up of the unit and remain energized until a critical error occurs.
19 © 2008 RuggedCom Inc. All rights re served Rev105 4.5 Console Port Wiring A RS232 console port for configuration and m anagement of the device is located on the LED display module shown in Figure 11.
20 © 2008 RuggedCom Inc. All rights re served Rev105 4.6 Twisted-Pair Data Ports 4.6.1 Micro-D Twisted-Pair Data Ports The M2100 may have several 10/100/1000BaseTX por ts that allow connection to standard CAT-5 UTP cable with Micro-D connectors. Figure 13 shows the Micro-D port pin configuration.
21 © 2008 RuggedCom Inc. All rights re served Rev105 4.6.2 Protection on Tw isted-Pair Data Ports RuggedCom does not recommend the use of CAT-5 c abling of any length for critical real-time substation automation applications.
22 © 2008 RuggedCom Inc. All rights re served Rev105 4.7 Gigabit Ethernet 1000Base-Tx Cabling Recommendations The IEEE 802.3ab Gigabit Ethernet standard defines 1000Mbit/s Ethernet communications over distances of up to 100 meters using 4 pairs of category 5 (or higher) balanc ed unshielded twisted- pair cabling.
23 © 2008 RuggedCom Inc. All rights re served Rev105 5 T echnical S pecifications 5.1 Power Supply Specifications Input Range Power Supply Type Min Max Fuse Rating Max.
24 © 2008 RuggedCom Inc. All rights re served Rev105 5.3 Networking Standards Supported Parameter 10Mbps Ports 100Mbps Ports 1000Mbps Ports Notes IEEE 802.3 10BaseT / 10BaseFL IEEE 802.3u 100BaseTX / 100BaseFX IEEE 802.3z 9 1000BaseSX/LX IEEE 802.3ab 9 1000BaseTx IEEE 802.
25 © 2008 RuggedCom Inc. All rights re served Rev105 5.5 Fiber Optical Specifications The following sections detail fiber optical specif ications on ports that can be ordered with the M2200 series Ethernet switch.
26 © 2008 RuggedCom Inc. All rights re served Rev105 5.6 Type Test Specifications Electrical Safety Levels Comments Dielectric Withstand 2 kV RMS for 1 minute ANSI/IEEE C37.
27 © 2008 RuggedCom Inc. All rights re served Rev105 5.7 Operating Environment Parameter Range Comments Ambient Operating Temperature -40 to 85 ° C Ambient Temperature as measured from a 30cm radius surrounding the center of the enclosure.
28 © 2008 RuggedCom Inc. All rights re served Rev105 5.8 Mechanical Specifications Parameter Value Comments Dimensions 19.00 x 14.50 x 2.02 inches (482.
29 © 2008 RuggedCom Inc. All rights re served Rev105 6 Agency Approvals Agency Standards Comments CE EN 60950, EN 61000-6-2 CE Compliance is claimed via Declaration of Self Conformity Route FCC FCC P.
Ein wichtiger Punkt beim Kauf des Geräts RuggedCom m2200 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie RuggedCom m2200 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für RuggedCom m2200 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von RuggedCom m2200 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über RuggedCom m2200 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon RuggedCom m2200 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von RuggedCom m2200 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit RuggedCom m2200. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei RuggedCom m2200 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
