Benutzeranleitung / Produktwartung GMRS9010-2 des Produzenten Audiovox
Zur Seite of 28
128-7032A 1 of 28 General Mobile Radio Service (GMRS) Model : GMRS9010-2 Owner ’s Manual Customer Service 1-800-290-6650 Released: 2-10-04 Revision A: 3/3/04 Changes to power on/off, keylock and battery charge func- tions.
128-7032A 2 of 28 2 THIS P AGE LEFT BLANK INTENTIONALL Y.
128-7032A 3 of 28 CAUTION SAFETY INFORMA TION Y our wireless hand-held portable transceiver contains a low power transmitter . When the PTT button is pushed (or the VOX mode is enabled) it sends out radio frequency (RF) signals. The device is authorized to operate at a duty factor not to exceed 50%.
128-7032A 4 of 28 W ARNINGS: Battery Care Never attempt to charge alkaline or dry cell batteries, as batteries may burst causing personal injury and damage to the product. If rechargeable batteries are used, such as Nickel Metal Hydride (NiMH), use only Audiovox- approved rechargeable batteries.
128-7032A 5 of 28 5 1. Battery Door 2. Monitor/Backlight Button 3. Detachable Carry Clip 4. Push-T o-T alk (PTT) Button 5. Antenna 6. External Speaker(SPK)/Micro- phone (MIC)/Charge (CHG) Jack 7. Built-in Speaker 8. Liquid Crystal Display (LCD) Model GMRS9010-2 (FCC License Required) 9.
128-7032A 6 of 28 6 Model GMRS9010-2 DISPLA Y 1. Beep T one Indicator: Icon appears when beep button confirmation tone is selected; icon disappears when tone is off. 2. Key Lock Indicator: Icon appears when the keypad is locked. This function disables keys such as channel up/down, SCAN and MODE.
128-7032A 7 of 28 7 12. Small Segment Display: Displays the CTCSS tone option for each main channel from 01 - 38 . 13. Dual Watch Mode Indicator: Indicator appears when dual watch mode is active. 14. V oice Activated T ransmission (VOX) Indicator: This function allows hands free conversation.
128-7032A 8 of 28 8 2 . Slide the cover down and then lift cover at bottom to open.Remove cover . 3. Insert five AAA batteries (positive (+) end toward right side begining at top and alternating positive terminals as shown). 1 . Using thumb, press down on battery cover at arrow and slide cover down to open.
128-7032A 9 of 28 9 The following guidelines will improve performance and provide longer operating times for the GMRS9010-2: 1. Do not mix old and new batteries. 2. The use of alkaline-type batteries is recommended to provide the longest operating time.
128-7032A 10 of 28 Controls: LED Flashlight Button (16) Press this button on the right side of the Transceiver to light the white LED (15) on top of the unit, thereby activating the built-in flashlight function. Power On/Off/Keylock (13) Button T o turn unit on, press the power on/off button ( ) momentarily (less than 1 second).
128-7032A 11 of 28 11 Push T o T alk (PTT) Button (4) Pressing and holding this button will allow you to speak to any transceiver that is set to the same channel and privacy code setting as yours. Hold the transceiver approximately 1 to 2 inches from your face as you speak into the built in microphone (9).
128-7032A 12 of 28 12 mode; the VOX icon will appear in the bottom right corner of the display when enabled. Operating Modes and Features GMRS Operation: - From GMRS/FRS standby mode, press and hold the ( ) button for 2 seconds to turn on power . - Press the MODE button so the Channel number flashes.
128-7032A 13 of 28 13 Before transmitting on the selected channel, press the Monitor (M) Button (2) to check the activity on that channel. If there is activity on the selected channel, change to another channel that is clear . T o change the channel: - From GMRS/FRS standby mode, press the MODE button (12) once or until the channel number flashes.
128-7032A 14 of 28 14 The CTCSS subcodes do not prevent others from hearing your transmission. This will only allow you to ignore all traffic on a given channel not using the same subcode. T ransmit Power Selection Mode This feature permits selection of the transmitting power level to high or low .
128-7032A 15 of 28 15 dual watch channel. Received signals will be played for 5 seconds, then the unit will resume scanning the two channels. Pressing the PTT button during a received transmission will set the unit to transmit on the same channel.
128-7032A 16 of 28 16 - Press the PTT button momentarily to confirm selection. When the key tone feature is on, the Bell icon appears steady on the display , and the beep tones sound in response to button activation. Roger Beep T one The Roger Beep is a tone which is automatically transmitted whenever the PTT button is released.
128-7032A 17 of 28 17 NOTE: While the scan function is active, the MODE button will be inoperative. The scan mode will reduce the overall battery life since the battery save function is overridden. T o enable the channel scan mode: - From GMRS/FRS standby mode, momentarily press the SCAN But ton; ( SCAN ) will appear on the LCD display .
128-7032A 18 of 28 18 VOX Enable Operation This option enables you to have hands-free conversation. Y our voice or nearby sound is detected and the radio transmits without the need to press the PTT button.
128-7032A 19 of 28 - Momentarily press the MODE button again to access the weather alert function; the weather icon ( ) and AL on or oF appear flashing on the display . - Use the Up or Down buttons to enable ( on )/disable ( oF ) the alert function. The weather icon will stop blinking on the display in the GMRS mode when the alert is disabled.
128-7032A 20 of 28 3. For best transmission results, always keep your mouth about 2-3 inches from the microphone (9) and speak slowly in a normal voice. 4. T o increase battery life, avoid features such as Scan and Dual W atch. These features will reduce operating time considerably .
128-7032A 21 of 28 T roubleshooting 21 Weak or no Weak batteries Charge or replace batteries signal received Channel and privacy Adjust the transceiver’s code not set the same settings to match thos.
128-7032A 22 of 28 22 General Frequency Range: Channels 1-7 (Shared with FRS Radios) Refer to frequency chart on next page Channels 8-14 (FRS only) Refer to frequency chart on next page Channels 15-22 (GMRS only) Refer to frequency chart on next page Channel Spacing 12.
128-7032A 23 of 28 23 This transceiver complies with FCC regulations for use in the United States of America. Use in other countries may be prohibited or restricted by local regulation. Please check with the local regulating agency be- fore using this device outside the United States of America.
128-7032A 24 of 28 24 WHEN USING RADIOS PRODUCED BY OTHER MANUF ACTURERS, COMP ARE CHANNEL FREQUENCIES FOR COMP A TIBILITY . NOTE CHANNELCROSS REFERENCE FOR 15 CHANNEL GMRS/FRS RADIO TO 22 CHANNEL GMR.
128-7032A 25 of 28 * oF = No T one Continuous T one Coded Squelch System T one Frequencies (in Hz) CTCSS Freq. Hz CTCSS Freq. Hz 1 67.0 2 0 131.8 2 71.9 2 1 136.5 3 74.4 2 2 141.3 4 77.0 2 3 146.2 5 79.7 2 4 151.4 6 82.5 2 5 156.7 7 85.4 2 6 162.2 8 88.
128-7032A 26 of 28 90 DAY LIMITED WARRANTY AUDIOVOX CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 1-800-290-6650 128-5385A Applies to Audiovox Family Radio and General Mobile Service Products.
128-7032A 27 of 28 THIS P AGE LEFT BLANK INTENTIONALL Y 27.
128-7032A 28 of 28 © 2004 Audiovox Electronics Corp., Hauppauge, NY 1 1788 Printed in China 128-7032A.
Ein wichtiger Punkt beim Kauf des Geräts Audiovox GMRS9010-2 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Audiovox GMRS9010-2 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Audiovox GMRS9010-2 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Audiovox GMRS9010-2 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Audiovox GMRS9010-2 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Audiovox GMRS9010-2 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Audiovox GMRS9010-2 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Audiovox GMRS9010-2. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Audiovox GMRS9010-2 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
