Benutzeranleitung / Produktwartung PC-60 des Produzenten Roland
Zur Seite of 22
Color CAMM PRO PC-60 APPLICA TION SOFTW ARE GUIDE CONTENTS Setting & Functions of Windows Driver How to Print from Adobe Illurstrator 7.01 (Basic Operation) How to Print from CorelDRA W 7 (Basic Operation) How to Print T ile Page from Illustrator 7.
Sheet Size Width x Length (mm) Printing Area (mm) A4 210 x 297 173.3 x 176.1 A3 297 x 420 260.0 x 298.0 ANSI A 215.9 x 279.4 178.8 x 157.1 ANSI B 279.4 x 431.8 243.8 x 308.8 12inch x 33inch 304.8 x 838.2 268.2 x 715.2 16inch x 33inch 406.4 x 838.2 368.
3 4 5 Roland ColorCAMM PC-60 Properties (Size) 1 2 Cutting line can be selected and cutting speed can be set. Bitmap data will be printed instead of being cut. Please create the cutting line in vector data. Resolution Resolution for the W indows Driver to generae printing data can be selected.
1 2 How to select cutting • By Color Only the vector data pointed out by specific color can be cut. Similar colors won’t be cut. Only colors matched with the numbers selected in R, G and B will be cut. Other colors will be printed. Cutting Speed Speed for cutting can be set.
Sheet Size Feeding Rate A4 174mm A3 297mm ANSI A 156.4mm ANSI B 308.8mm 12inch x 33inch 715.2mm 16inch x 33inch 715.2mm 24inch x 33inch 715.2mm User Size Length of Printing Area Roland ColorCAMM PC-60 Properties (Output Option) 1 2 3 4 1 Output Data • When only selecting [Printing] Only the printing data will be sent to PC-60.
2 Process PC-60 prints in full color using the process color . Do not select any of them when printing in Special Color . • Y .M.C.K PC-60 will print in order of Y ellow --> Magenta --> Cyan --> Black. Printing result should be better by selecting this option when printing image with red and green with resin ribbon.
Roland ColorCAMM PC-60 Properties (Image Correction) 1 1 Correction V alue • Brightness Brightness of the image can be adjusted. Image will be brighter when the value is increased. Default is 0. • Contrast Contrast of the image can be adjusted. Contrast will be stronger when the value is increased.
Left data will be used for explanation. How to Print from Adobe Illustrator 7.01 (Basic Operation) Start Illustrator7.01 and enter File --> Document Setup. Select [Use Page Setup] and click the [Page Setup] button. Select the [Size] T ab from the properties.
Select the [Output Option] T ab. Make sure [Cutting] is selected when data includes the cutting data. When completing the above settings, click the OK button and move the image inside the page. Select the object which you like to be cut and click the [Stroke].
Color % R G B Cyan 100% 0 255 255 Cyan 5 0 % 1 2 8 2 5 5 2 5 5 Cyan 2 5 % 1 9 2 2 5 5 2 5 5 Magenta 100% 255 0 255 Magenta 5 0% 2 55 1 28 2 55 Magenta 2 5% 2 55 1 92 2 55 Yellow 100% 255 255 0 Yellow .
How to Print from CorelDRA W 7 (Basic Operation) Left data will be used for explanation. Start CorelDRA W 7 and enter File --> Print Setup. Enter the [Size] T ab from the properties. Set the size so that the image can be fit. Enter the [Cutting] T ab.
Enter the [Output Option] T ab. Make sure [Cutting] is selected when data includes the cutting data. When completing the above settings, click the OK button. Enter Layout --> Page Setup in CorelDRA W 7. The page size set in the Windows Driver will be entered for the page size by clicking [Set From Printer].
Software Resolution Length ( Max ) CorelDRAW7 600dpi 1263.5mm 300dpi 2650mm 150dpi 3276.7mm Make sure that the settings of the [Outline T ool] is done correctly at the lower right corner . Open the [File] --> [Print] in CorelDRA W 7 and enter the Print Dialog.
How to Print T ile Page from Illustrator 7.01 (Advanced Operation) This section explains how to print tile page from Illustrator 7.01. Please read the section [How to Print from Illustrator 7.01 (Basic Operation) before trying this section. Data below will be used for explanation.
Make sure that the image is inside the page displayed. Open the [Document Setup] and remove the check from the [Use Print Setup] and then open the [Properties] by clicking the [PageSetup]. W e will devide the data in half so we will set the [Length] to the half of the size of the cur- rent size and press OK button.
<Notes for Printing T ile Page> 1. Because the Illustrator 7.01 is a software made by American Company , Adobe System Corporation, the concept of the unit is in inches. And the data will be sent to PC-60 in dpi (dot per inch = number of dots printed in 1 inch).
How to Print Tile Page from CorelDRA W 7 (Advanced Operation) This section explains how to print tile page from Illustrator CorelDRA W 7. Please read the section [How to Print from CorelDRAW 7 (Basic Operation) before trying this section. Left data will be used for explanation.
Click OK button after completing the above settings. Click [Preview] from the Print Dialog. After checking the image, click [Option]. Select [Print tiled page] and click [Close] button.
This guide explains the operation based on the fact that the Roland Windows Driver for Windows95/98 is used. Please be noted that the Windows Driver below the version 2.1 can not be used with Illustrator 8.0. Start Illustrator 8.0 and select [Document Setup] from [File].
Make sure to set the [Weight] in Illustrator 8.0 to 0.1pt (0.04mm) for the lines to be cut. Make sure to select [by Color] for [Cutting] in the [Output Option] tab of the [Windows Driver Properties] Before Printing Remove the check from [Silmulate print colors on display] from the [Color] under [File] of Illustrator 8.
What to do if . . . . Windows Driver • Time Out Error is displayed. This error is displayed sometimes when printing image file with a big size. Open the properties of PC-60 Windows Driver from the [Printers] folder in the [Settings] of Windows PC. Then increase the time for [T ransmission Retry] in the Detail T ab.
• PC-60 cuts but doesn’t print. When [Printing] is not selected, PC-60 doesn’t print. Make sure to select [Printing]. • Image is printed with Special Color at where it is not suppose to be printed. The color which has been print with Special Color is printed at where it is not supposed to be printed.
Ein wichtiger Punkt beim Kauf des Geräts Roland PC-60 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Roland PC-60 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Roland PC-60 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Roland PC-60 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Roland PC-60 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Roland PC-60 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Roland PC-60 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Roland PC-60. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Roland PC-60 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
