Benutzeranleitung / Produktwartung MP-70 des Produzenten Roland
Zur Seite of 52
Owner’s Manual Thank you, and congratulations on your choice of the Roland Digital Piano MP-70. Main Features Piano Sounds with Rich Resonance and Wide-Ranging Expressiveness The stereo sampling pia.
2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION : RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3 USING THE UNIT SAFELY 001 • Before using this unit, make sure to read the instruc- tions below, and the Owner’s Manual. .......................................................................................................... 002a • Do not open or perform any internal modifications on the unit.
4 015 • Do not force the unit’s power-supply cord to share an outlet with an unreasonable number of other devices. Be especially careful when using extension cords—the total power used by all devices you have connected to the extension cord’s outlet must never exceed the power rating (watts/amperes) for the extension cord.
5 IMPORTANT NOTES 291b In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 3 and 4, please read and observe the following: Power Supply 3.
6 Contents USING THE UNIT SAFELY ......................... 3 IMPORTANT NOTES ................................... 5 Panel Descriptions ..................................... 7 Front Panel..................................................................
7 Panel Descriptions Front Panel 1 [Power] switch Turns the power on/off (p. 9). 2 [VOLUME] knob Adjusts the overall volume level (p. 9). 3 [DEMO] button You can listen to a demo of the instrument’s tones (p. 13). 4 [ (Headphones)] indicator This indicator lights up when headphones are connected to the headphones jack (p.
8 Before You Start Playing Connect the Pedal Cable Insert the pedal cable into the Pedal jack on the rear panel of the MP-70. fig.00-01 Connect the Power Cord Insert the included power cord into the AC inlet on the bottom panel of the MP-70, and then plug it into an electrical outlet.
9 Before You Start Playing ■ Using the Headphones Hook Whenever you are not using the headphones, you can hang them on the headphones hook at the lower left of the MP-70. Attaching the Headphones Hook Press and twist the headphones hook included with the MP- 70 into the hole in the bottom of the MP-70 (refer to the figure below).
10 Before You Start Playing About the Pedals The pedals have the following functions, and are used mainly for piano performance. fig.00-08.e Damper pedal (right pedal) While this pedal is pressed, notes will be sustained even after you take your fingers off the keys.
11 Chapter 1. Enjoying the Internal Songs and Demo Listening to Internal Songs The MP-70 comes with 66 piano songs onboard. ■ Playing Back All Songs Continuously (All Song Play) The internal songs can be played back consecutively. fig.panel1-1 1 Hold down the [SONG/TEMPO] button, and press the [PLAY] button.
12 Chapter 1. Enjoying the Internal Songs and Demo Playing back 3 Press the [PLAY] button. The button’s indicator will light, and the selected song will play. Stopping the playback 4 Press the [PLAY] button. The button’s indicator goes out, and playback stops.
13 Chapter 1. Enjoying the Internal Songs and Demo Listening to the Demo Songs You can listen to various demo songs, including those demonstrating the piano and other tones, as well as the function applied to the piano tones. ■ Playing Back the Tone Demo Songs fig.
14 Chapter 2. Performance Performing with a Variety of Sounds The MP-70 contains 15 different internal tones. The tones are organized into five tone groups, which are assigned to the TONE SELECT buttons. fig.panel2-1 Selecting a tone group 1 Press any TONE SELECT button.
15 Chapter 2. Performance Adjusting the Keyboard Touch (Key Touch) You can adjust the touch (playing feel) of the keyboard. fig.panel2-7 1 Press the [KEY TOUCH] button.
16 Chapter 2. Performance Applying Effects to the Sound fig.panel2-5 ■ Adding Reverberation to the Sound (Reverb) By applying the reverb effect you can produce a pleasant reverberation, making it sound as though you were performing in a concert hall.
17 Chapter 2. Performance Transposing the Key of the Keyboard (Transpose) By using the “Transpose function,” you can transpose your performance without changing the notes you play. For example, even if the song is in a difficult key with numerous sharps ( ) or flats ( ), you can transpose it to a key that is easier for you to play.
18 Chapter 2. Performance Splitting the Keyboard Into Two Sections for Four-Hand Performances (Twin Piano Mode) You can divide the keyboard into two separate sections, allowing two people to perform in the same registers. 1 Press the [TWIN PIANO] button.
19 Chapter 2. Performance Playing Two Sounds Together (Dual Play) Simultaneously playing two tones when one key is pressed is called “Dual play.” 1 Simultaneously press the two TONE SELECT buttons that you want to play together. The indicator of the button you pressed will light.
20 Chapter 2. Performance Playing Different Tones with the Left and Right Hands (Split Play) Dividing the keyboard into right-hand and left-hand areas, then playing different sounds in each is called “Split play.” The boundary key is called the “split point.
21 Chapter 2. Performance ■ Changing the Keyboard’s Split Point You can change the location where the keyboard is divided (the split point) within the range of B1 through B6. 1 While continuing to hold the [SPLIT] button, press the key that you want to specify as the split point.
22 Chapter 2. Performance Changing the beat of metronome 4 Hold down the [SONG/TEMPO] button, and press the [-] or [+] button. The currently selected beat will be displayed. If you hold down the [SONG/TEMPO] button and press the [-] or [+] button, the beat will change.
23 Chapter 3. Playing Along with the Internal Songs Here’s how you can play along with the internal songs. You can slow down the playback tempo of the song, or play back each hand separately. Before you try playing the song, listen to it several times to get a general feel for the song.
24 Chapter 3. Playing Along with the Internal Songs Playing Each Hand Separately The internal songs have different parts recorded to the left-hand and right-hand performances.
25 Chapter 4. Recording Your Performance You can easily record your performances. A recorded performance can be played back to hear your own playing, or to add additional parts. The following types of recording can be done using the MP-70. • Recording just your own keyboard performance ( → “Recording a New Song” p.
26 Chapter 4. Recording Your Performance Recording a New Song Record only the keyboard performance without playing along with an internal song. fig.panel4-1 Recording settings (select “USr”) 1 Press the [SONG/TEMPO] button, getting its indicator to light in red.
27 Chapter 4. Recording Your Performance Recording Along with a Song You can record a performance that you play along with an internal song. Using the [LEFT] or [RIGHT] buttons, you can perform and record just the right- hand part of a song while listening to the left-hand playback of an internal song.
28 Chapter 4. Recording Your Performance Recording the Right-Hand and Left-Hand Parts Separately You can use the MP-70’s recorder to record the right-hand and left-hand parts separately. You can also specify individual parts to record to when you want to do a recording over again.
29 Chapter 4. Recording Your Performance Stop recording 5 Press the [PLAY] or [REC] button. Recording stops, and the indicators for the [PLAY] and [REC] buttons go out. The performance of the specified part has been recorded. To record the performance of the other part, go back to Step 2 and repeat the procedure from there.
30 Chapter 4. Recording Your Performance Erasing Recorded Performances You can erase a recorded performance. ■ Erasing a Performance from the Specified Track You can select a recorded track and erase it. 1 Hold down either the [LEFT] or [RIGHT] button and press the [ REC] button.
31 Chapter 4. Recording Your Performance Saving Recorded Songs Even with the Power Turned Off (Song Backup) Normally, any songs you have recorded are deleted when you turn off the power to the MP-70. However, if you wish, you can have such recorded songs be saved even while the power is turned off.
32 Chapter 5. Changing Various Settings Changing the Damper Pedal’s Resonance On an acoustic piano, depressing the damper pedal makes the notes you play resonate with other strings, adding rich reverberations and fatness to the sound. The damper pedal on the MP-70 recreates this resonance (damper resonance) when depressed.
33 Chapter 5. Changing Various Settings For details on each function, refer to the explanations below. 3. Press the [-] or [+] button to change the value. If you press the [-] and [+] buttons simultaneously, the value will return to the power-up default setting.
34 Chapter 5. Changing Various Settings ■ Changing the Temperament You can play classical styles such as Baroque using historic temperaments (tuning methods). Today, compositions are generally created with equal temperament in mind and are played using equal temperament.
35 Chapter 5. Changing Various Settings ■ Applying the Damper Pedal to the Left-hand Keyboard Area When you are using Split play (p. 20), you can apply the damper pedal effect to the sound played by the left-hand keyboard range. 1. Hold down the [SPLIT] button, and press the [TWIN PIANO] button.
36 Chapter 5. Changing Various Settings Getting the Master Tune Setting To Be Remembered While the Power Is Turned Off Normally, the Master Tune setting reverts to the default value when the power is turned off. However, you can set the MP-70 so that the Master Tune value is retained even while the power is turned off.
37 Chapter 6. Connecting External Devices Connecting to Audio Equipment You can connect audio devices to play the sound of the MP- 70 through the speakers of your audio system, or to record your performance on a tape recorder or other recording device.
38 Chapter 6. Connecting External Devices Connecting MIDI Devices By connecting an external MIDI device and exchanging performance data, you can control the performances on one device from the other. For instance, you can output sound from the other instrument or switch tones on the other instrument.
39 Chapter 6. Connecting External Devices ■ MIDI Send Channel Settings MIDI features sixteen MIDI channels, numbered 1–16. Simply connecting a cable is not enough for communication to take place. The connected devices must be set to use the same MIDI channels.
40 Appendices Troubleshooting If you think there’s a problem, read this first. Case Cause/Remedy The power doesn’t come on Is the power cord connected and plugged in correctly? (p. 8) The button doesn’t work Is the panel locked? (p. 35) Is the Tone locked? (p.
41 Error Messages/Other Messages In the upper range, the sound changes abruptly beyond a certain key On an acoustic piano, notes in the upper one and a half octaves of the keyboard continue to sound until they decay naturally, regardless of the damper pedal.
42 Tone List * A+B: simultaneously playing two tones You can change the volume balance between the two tones, refer to “Adjusting the Volume Balance in Dual Play (Dual Balance)” (p.
43 Internal Song List Song No. Song Name Composer Copyright S. 1 La Fille aux Cheveux de Lin C. Debussy © 2004 Roland Corporation S. 2 Late Night Chopin F. Chopin/ Arranged by John Maul © 2002 Roland Corporation S. 3 Fly Free John Maul © 1998 Roland Corporation S.
44 Internal Song List 981a * All rights reserved. Unauthorized use of this material for purposes other than private, personal enjoyment is a violation of applicable laws. * No data for the music that is played will be output from MIDI OUT. S. 42 Blumenlied G.
45 Easy Operation List 3 4 1 1 2 3 4 5 6 7 10 8 9 1 2 No. Y ou want to Buttons Page Press the [SPLIT] and [TWIN PIANO] buttons simultaneously, and press the [ ● ] button. Master T uning [SPLIT]+ [TWIN PIANO] → [PIANO] p. 33 Selecting a temperament Specifying the keynote [SPLIT]+ [TWIN PIANO] → [E.
46 MIDI Implementation Chart Function... Basic Channel Mode Note Number : Velocity After Touch Pitch Bend Control Change Prog Change System Exclusive System Common System Real Time Aux Message Notes T.
47 Main Specifications 962a * In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
48 Index Symbols - .......................................................................................... 7 + ......................................................................................... 7 A AC inlet ..................................
49 Index T Temperament ................................................................. 34 TEMPO ................................................................. 7, 21, 23 Tone ........................................................................
MP-70_e.book 50 ページ ２００６年３月２９日 水曜日 午後４時１７分.
This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC. For EU Countries For Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
As of April 1, 2006 (ROLAND) Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below.
Ein wichtiger Punkt beim Kauf des Geräts Roland MP-70 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Roland MP-70 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Roland MP-70 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Roland MP-70 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Roland MP-70 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Roland MP-70 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Roland MP-70 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Roland MP-70. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Roland MP-70 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
