Benutzeranleitung / Produktwartung JUNO-D des Produzenten Roland
Zur Seite of 132
Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. As of May 1, 2004 (Roland) ARGENTINA Instrumentos Musicales S.
2 To resize thickness, move all items on the front cover USING THE UNIT SAFELY 001 • Before using this unit, make sure to read the instructions below, and the Owner’s Manual. ........................................................................
3 011 • Do not allow any objects (e.g., flammable material, coins, pins); or liquids of any kind (water, soft drinks, etc.) to penetrate the unit. ......................................................................................................
4 IMPORTANT NOTES 291a In addition to the items listed under “USING THE UNIT SAFELY” on page 2–3, please read and observe the following: Power Supply 301 • Do not connect this unit to same ele.
5 559a • When you need to transport the unit, package it in the box (including padding) that it came in, if possible. Otherwise, you will need to use equivalent packaging materials. 561 • Use only the specified expression pedal (EV-5; sold separately).
6 Contents IMPORTANT NOTES ............................................................................... 4 Main Features .......................................................................................... 9 Panel descriptions ................
7 Contents Convenient functions for patch editing (Patch Utility)....................................................................... 49 Copying patch parameters (PATCH PRM COPY) ................................................................... 49 Initializing the parameters of a patch (PATCH INITIALIZE) .
8 Contents Performing with an external MIDI device ............................................ 92 About MIDI .............................................................................................................................................
9 Main Features A broad range of new, high-quality sounds Careful attention has been paid to refining the most important sounds for a live keyboard, such as piano, organ, strings, and brass. In addition, the latest cutting-edge sounds are also included.
10 Panel descriptions Front panel fig.04-01.l A D BEAM CONTROLLER You can apply a variety of effects to sounds simply by moving your hand (p. 31). [SOLO SYNTH] (Solo Synthesizer) button You can generate passages that sound as if you are rapidly playing the keyboard.
11 Panel descriptions fig.04-01.r [WRITE] button Saves patch/performance settings or system settings. [-/+OCT] (Octave Shift) / [-/+TRANSPOSE] (Transpose) buttons - /+OCT: These buttons adjust the pitch of the keyboard in octave steps (maximum +/-3 octaves) (p.
12 Panel descriptions PAGE/CURSOR [ ]/[ ] / JUMP [ ]/[ ] buttons PAGE/CURSOR: Use these buttons to move between pages or to move the cursor (p. 42). JUMP: In grouped pages, you can hold down [SHIFT] and use these buttons to move between groups (p. 42).
13 Panel descriptions Rear panel fig.04-02 A MIDI connectors (IN, OUT) These connectors can be connected to other MIDI devices to receive and transmit MIDI messages (p. 92). Use MIDI cables (sold separately) to make connections. IN: MIDI messages from an external device are received at this connector.
14 Getting ready Connecting the JUNO-D to external equipment The JUNO-D does not contain an amp or speaker. You’ll need to listen to it through powered monitors, a mixer and connected monitors, a stereo system, or through headphones. Connect as follows when using the JUNO-D as a stand-alone device.
15 Getting ready 3. Connect the JUNO-D and the external device as shown in the figure. Use audio cables to connect audio equipment, such as an amp or speakers. If you are using headphones, plug them into the PHONES jack. Connect pedal switches or expression pedals as necessary.
16 Getting ready Turning off the power 1. Before you turn off the power, make sure of the following points. • Are the volume controls of the JUNO-D and the other connected equipment turned to the minimum position? • Have you saved the sounds or other data you’ve created? (p.
17 Reset to default factory settings ( Factory Reset) This restores all data in the JUNO-D to the factory-set condition ( Factory Reset ). fig.q02-01 1. Press [PATCH] so it is lit and you are in Patch mode. 2. Press [UTILITY] so it is lit. 3. Use PAGE/CURSOR [ ]/[ ] to select “5:FACTORY RESET.
18 Listening to the demo songs The JUNO-D contains Demo songs. Here’s how to listen to the demo songs and experience the superb sounds and effects of the JUNO-D. fig.q03-01 1. Press [DEMO]. fig.q03-02_40 2. Use VALUE [-]/[+] to select the song that you wish to hear.
19 Quick Start JUNO-D_e.book 19 ページ ２００４年６月１１日 金曜日 午後１時２１分.
20 Try out the sounds Selecting a patch On the JUNO-D, the sounds you use for normal playing are called patches . A patch is analogous to an instrument held by a member of an orchestra. Each patch consists of two tones; an upper tone and lower tone . You can assign the two tones to their own region of the keyboard (p.
21 Try out the sounds Quick Start fig.q04-02 1. Press [PATCH] so it is lit and you are in Patch mode. 2. Use [0]–[9] to specify the category group of the patch you want to select. 3. Use VALUE [-]/[+] to select sounds within the category group. 2 1 3 The rhythm sets are included in [0] (p.
22 Try out the sounds ■ Selecting patches while listening to phrases (Patch Audition) Without playing keyboards, you can audition the sounds using phrases that have been pre-programmed to be suitable for the character of each patch. fig.q04-03 1. Press [AUDITION].
23 Try out the sounds Quick Start Playing arpeggios (Phrase/Arpeggio) An arpeggio is a “broken chord” where each note is played separately. The Phrase/ Arpeggio function lets you produce an arpeggio simply by holding down a chord, and is also a convenient way to input a performance into an external sequencer.
24 Try out the sounds 5. When you press [EXIT], the Arpeggio function will remain on and you will return to the previous screen. If you want to select an arpeggio template once again, press [PHRASE/ARPEGGIO] so it goes out, and then press [PHRASE/ARPEGGIO] once again so it is lit.
25 Try out the sounds Quick Start ■ Switching chord sets Then, try to change chord sets. fig.q04-10 3. Use VALUE [-]/[+] to select a Chord Set. The user chord set appears after the preset chord sets. 4. When you press [EXIT], the Multi-chord Memory function will remain on and you will return to the previous screen.
26 Applying various effects to the sound Changing the tone with the knobs ( Patch Modify) Using the five panel knobs, you can change the tone in real time.
27 Applying various effects to the sound Quick Start ■ Vibrato and Wah effects (LFO) The LFO, short for “low frequency oscillator,” makes changes to the sound in periodic fashion.
28 Applying various effects to the sound ■ Changing the sound’s volume (ENVELOPE) The volume continues to change from the time a key is pressed to when it is released. A: Attack Time: The time from when the keyboard is pressed until the maximum tonal change is reached.
29 Applying various effects to the sound Quick Start ■ Changing the brightness of the sound and adding special qualities (CUTOFF/RESONANCE) The sound generator section of the JUNO-D contains a filter that can cut or boost specific frequency regions of the sound.
30 Applying various effects to the sound Using a pedal to modify the sound With an external pedal, such as an expression pedal (the optional EV-5), pedal switch (the optional DP-2/8) or foot switch (the optional BOSS FS-5U) connected to the CONTROL PEDAL jack, you can then use the pedal to make changes in the tone.
31 Applying various effects to the sound Quick Start Moving the key range in half-steps ( TRANSPOSE) This function moves the key range in half-step units. This is convenient in situations like the ones below. When matching the vocalist’s register Sometimes melodies may extend outside a vocalist’s register.
32 Applying various effects to the sound 2. While playing the keyboard to produce sound, place your hand over the D Beam, and slowly move it up and down. An effect will be applied to the sound, depending on the function that is assigned to the D Beam controller.
33 Applying various effects to the sound Quick Start ASSIGNABLE Specifies a function controlled by the D Beam controller. Use VALUE [-]/[+] and select one of the following functions. In Patch mode, the effect will apply to the patch. In Performance mode, the effect will apply to the patch assigned to the current part.
34 Applying various effects to the sound ■ Adjusting the sensitivity of the D Beam controllers (D BEAM SENS) The sensitivity of the D Beam controller will change depending on the amount of light in the vicinity of the unit. If it does not function as you expect, adjust the sensitivity as appropriate for the brightness of your location.
35 Applying various effects to the sound Quick Start Using the JUNO-D effects Three separate effects are always available in the JUNO-D. You can independently edit each effect’s settings. Multi-Effects The JUNO-D contains 47 different multi-effects, including distortion and a rotary speaker simulation.
36 Using the Rhythm Guide The Rhythm Guide provides an easy way to produce full-fledged rhythm patterns as easily as using a metronome. The Rhythm Guide can be used only in Performance mode , which lets you perform on the keyboard while using drum sounds simultaneously.
37 Using the Rhythm Guide Quick Start Switching sounds fig.q06-22 1. Play the rhythm pattern. 2. Press [PART SELECT] so it is lit. 3. Press [0] so it is lit to select a rhythm set. 4. Use VALUE [-]/[+] to select the rhythm set that you want to use with the rhythm pattern.
38 Memo JUNO-D_e.book 38 ページ ２００４年６月１１日 金曜日 午後１時２１分.
39 Advanced Use JUNO-D_e.book 39 ページ ２００４年６月１１日 金曜日 午後１時２１分.
40 Overview of the JUNO-D How the instrument is organized Basic structure Broadly speaking, the JUNO-D consists of a keyboard controller section and a sound generator section. fig.r01-01.e Keyboard controller section This section consists of the keyboard, pitch bend/modulation lever, panel knobs and buttons, and D Beam controller.
41 Overview of the JUNO-D Overview Effects Effects let you apply a variety of special effects to patches or rhythm sets. You can use three effects simultaneously: chorus (which adds depth and spaciousness), reverb (which adds reverberation), multi-effects (each selectable from 47 types such as equalizer, overdrive, and delay).
42 Basic operation of the JUNO-D Switching the mode The JUNO-D has numerous functions, and these functions are organized into the following two modes. The operation of the sound generator and the screens that appear in the display will differ depending on the mode.
43 Basic operation of the JUNO-D Basic Operation Assigning a name As an exception, in pages where you can assign a name to a patch or performance, pressing PAGE/CURSOR [ ] will not immediately take you to the next page.
44 Creating a patch (Patch mode) To create a sound (patch) of your own on the JUNO-D, you will start with one of the existing patches ( preset patches ), and edit it to create the desired sound. A sound you create can be saved as one of 128 user patches.
45 Creating a patch (Patch mode) Patch Mode Selecting patch parameters fig.r03-06 Making settings that apply to the entire patch (Patch Common parameters) You can edit the following Patch Common parameters. Name (Patch Name) You can change the name of the patch.
46 Creating a patch (Patch mode) Split Arp When “Key Mode” (p. 45) is set to SPLIT, this specifies which tone will be affected by the arpeggiator. VALUE UPPER: The upper tone will be played by the arpeggiator. LOWER: The lower tone will be played by the arpeggiator.
47 Creating a patch (Patch mode) Patch Mode Fine Tune Adjusts the pitch of the tone’s sound up or down in one-cent steps (+/- 50 cents). VALUE: -50–+50 One cent is 1/100th of a semitone. • Creating smooth pitch transitions (Portamento) Portamento is an effect that creates a smooth transition in pitch between one key and the next.
48 Creating a patch (Patch mode) Resonance This boosts the region near the cutoff frequency to add a distinctive character to the sound. Raising this value excessively may cause oscillation and distortion. This is linked with the operation of the [RESONANCE] knob of the panel (p.
49 Creating a patch (Patch mode) Patch Mode Patch categories On the JUNO-D, a patch you edit can be named and saved in the desired category of sounds ( User Patch ). Saving an edited patch in the appropriate category will make it easier for you to find the patch when needed.
50 Creating a patch (Patch mode) Copying MFX, CHORUS, or REVERB effect settings 1. Press [PATCH] so it is lit and you are in Patch mode. Select the copy-destination patch. 2. Press [UTILITY]. 3. Use PAGE/CURSOR [ ]/[ ] to select “1:PATCH PRM COPY.” 4.
51 Creating a patch (Patch mode) Patch Mode Transmitting patch/rhythm set settings from the MIDI OUT connector (XFER to MIDI) You can transmit the settings of any patch from the MIDI OUT connector. This function can be used to save patch settings on an external sequencer.
52 Creating a rhythm set (Patch mode) The JUNO-D provides rhythm sets that are suitable for a variety of musical genres. You can edit a preset rhythm set to modify the pitch/volume/panning of each percussion instrument sound to your liking, and save it as a user rhythm set .
53 Creating a rhythm set (Patch mode) Patch Mode (Rhythm) • Specifying the amount of signal sent to the effect Chorus Send Lvl (Chorus Send Level) Sets the level of the signal sent to chorus for each tone. VALUE: 0–127 Reverb Send Lvl (Reverb Send Level) Sets the level of the signal sent to reverb for each tone.
54 Creating a rhythm set (Patch mode) Initializing the settings of a specific rhythm tone (RHY INITIALIZE) This operation initializes the rhythm tone parameters (p.
55 Performance Mode Playing more than one sound simultaneously (Performance mode) Choosing a part and selecting the sound A performance contains sixteen parts that let you play different sounds simultaneously. Here’s how to switch parts and assign a patch (or rhythm set) to each part.
56 Playing more than one sound simultaneously (Performance mode) Making settings that apply to the entire performance (Performance Common Parameters) Name (Performance Name) You can change the name of the performance. Here you can use PAGE/CURSOR [ ]/[ ] to move through the characters, and use VALUE [-]/[+] to finalize the desired character.
57 Playing more than one sound simultaneously (Performance mode) Performance Mode Receive Ch (Receive Channel) In Performance mode, the JUNO-D will operate as a sixteen-part MIDI multitimbral sound module. This parameter specifies the MIDI receive channel for each part.
58 Playing more than one sound simultaneously (Performance mode) Editing the scale tune settings (SCALE TUNE) The Scale Tune function lets you use a variety of tunings. For each note C–B, you can specify the pitch in units of one cent (1/100th of a semitone).
59 Playing more than one sound simultaneously (Performance mode) Performance Mode Saving a performance Use the following procedure to save a performance you’ve edited. 1. Press [WRITE]. Use VALUE [-]/[+] to specify the number (U1–U8) at which the user performance is to be saved.
60 Playing more than one sound simultaneously (Performance mode) 7. Press PAGE/CURSOR [ ]. Use VALUE [-]/[+] to specify the copy-source part. fig.r06-66_40 You can also select the part by pressing [0]–[9] or by holding down [SHIFT] and pressing [1]–[6].
61 Playing more than one sound simultaneously (Performance mode) Performance Mode Transmitting performance settings from the MIDI OUT connector (XFER to MIDI) You can transmit the settings of the current performance or user performance from the MIDI OUT connector.
62 Using the phrase/arpeggio function The JUNO-D provides arpeggio templates that use phrases suitable for each category of instrument. Some of the arpeggio templates are phrase templates , which let you produce arpeggios with a single finger, without having to hold down a chord.
63 Using the phrase/arpeggio function Phrase/arpeggio For a phrase template, this setting will be “PHRASE.” Accent Rate (Arpeggio Accent Rate) Modifies the strength of accents and the length of the notes to adjust the “groove” feel of the arpeggio.
64 Using chord memory function “Playing a chord at the touch of a finger (Multi-chord Memory)” (p. 24) 1. Press [CHORD MEMORY] so it is lit. fig.r06-30a_40 2. Select the desired chord set. When you play the keyboard, a chord of the specified structure will sound according to the key you press.
65 Effects Adding effects The JUNO-D contains three effects processors: multi-effects, chorus, and reverb. Settings can be made separately for each effects processor. There are 47 types of multi-effects, 8 types of chorus, and 8 types of reverb. You can use one of each type in a patch or part.
66 Adding effects The effect signal path The following figure shows the path followed by the effects signals. fig.r08-03.e P atch Mode (P atch) OUTPUT (R, L(MONO)) MFX Send Lev el to Cho MFX Send Lev .
67 Adding effects Effects Making effects settings Selecting effect parameters Select multi-effect, chorus, or reverb parameters as shown below. fig.r08-08.
68 Adding effects 1. Press [EFFECTS] so it is lit. The on/off state of each effect (multi-effect, chorus, reverb) will be displayed. fig.r08-04_40 2. When the cursor is located at “Rev,” press PAGE/CURSOR [ ], and the effect parameters will be displayed one after another starting with the multi-effect (MFX) parameters.
69 Adding effects Effects Send Lvl to Cho (Multi-effect send level to chorus) Sets the amount of the multi-effects sound that is sent to the chorus. Higher values result in more sound being sent. Value: 0–127 Send Lvl to Rev (Multi-effect send level to reverb) Sets the amount of the multi-effects sound that is sent to the reverb.
70 Adding effects 03: DISTORTION This effect produces a more intense distortion than Overdrive. fig.MFX-03 04: PHASER A phaser adds a phase-shifted sound to the direct sound, producing a twisting modulation that creates spaciousness and depth.
71 Adding effects Effects 07: AUTO WAH The Auto Wah cyclically controls a filter to create cyclic change in timbre. fig.MFX-07 08: ROTARY The Rotary effect simulates the sound of the rotary speakers often used with the electric organs of the past.
72 Adding effects 10: LIMITER The limiter compresses signals that exceed a specified volume level, preventing distortion from occurring. fig.MFX-10 11: HEXA-CHORUS Hexa-chorus uses a six-phase chorus (six layers of chorused sound) to give richness and spatial spread to the sound.
73 Adding effects Effects 13: SPACE-D Space-D is a multiple chorus that applies two-phase modulation in stereo. It gives no impression of modulation, but produces a transparent chorus effect. fig.MFX-13 14: St CHORUS (Stereo Chorus) This is a stereo chorus.
74 Adding effects 16: STEP FLANGER The Step Flanger effect is a flanger in which the flanger pitch changes in steps. fig.MFX-16 17: St DELAY (Stereo Delay) This is a stereo delay. When Feedback Mode is NORMAL: fig.MFX-17a When Feedback Mode is CROSS: fig.
75 Adding effects Effects 18: LONG DELAY This is useful when you want to apply a delay that is longer than 17: St DELAY. fig.MFX-18 19: MOD DELAY (Modulation Delay) This effect adds modulation to the delayed sound, producing an effect similar to a flanger.
76 Adding effects 20: 3 TAP DELAY (Triple Tap Delay) The Triple Tap Delay produces three delay sounds; center, left and right. fig.MFX-20 21: 4 TAP DELAY (Quadruple Tap Delay) The Quadruple Tap Delay has four delays. fig.MFX-21a The stereo location of each delay sound is as follows.
77 Adding effects Effects 22: TM CTRL DLY (Time Control Delay) You can change the delay time in real time. Lengthening the delay will lower the pitch, and shortening it will raise the pitch. fig.MFX-22 23: 2V PCH SHIFT (2-Voice Pitch Shifter) A Pitch Shifter shifts the pitch of the direct sound.
78 Adding effects 24: FB PCH SHIFT (Feedback Pitch Shifter) This pitch shifter allows the pitch shifted sound to be fed back into the effect. fig.MFX-24 25: REVERB The Reverb effect adds reverberation to the sound, simulating an acoustic space.
79 Adding effects Effects 26: GATED REVERB Gate Reverb is a special type of reverb in which the reverberant sound is cut off before its natural length. fig.MFX-26 27: OD>CHORUS (Overdrive → Chorus) This effect connects an overdrive and a chorus in series.
80 Adding effects 29: OD>DELAY (Overdrive → Delay) This effect connects an overdrive and a delay in series. fig.MFX-29 30: DIST>CHORUS (Distortion → Chorus) This effect connects distortion and chorus in series. The parameters are essentially the same as “27: OD>CHORUS,” with the exception of the following two.
81 Adding effects Effects 33: ENH>CHORUS (Enhancer → Chorus) This effect connects an enhancer and a chorus in series. fig.MFX-33 34: ENH>FLANGER (Enhancer → Flanger) This effect connects an enhancer and a flanger in series. fig.MFX-34 35: ENH>DELAY (Enhancer → Delay) This effect connects an enhancer and a delay in series.
82 Adding effects 36: CHORUS>DELAY This effect connects a chorus and a delay unit in series. fig.MFX-36 37: FLG>DELAY (Flanger → Delay) This effect connects a flanger and a delay in series.
83 Adding effects Effects 38: CHO>FLANGER (Chorus → Flanger) This effect connects a chorus and a flanger in series. fig.MFX-38 39: CHORUS/DELAY This effect connects a chorus and a delay in parallel. The parameters are the same as for “36: CHORUS > DELAY.
84 Adding effects 43: SLICER By applying successive cuts to the sound, this effect produces what are heard as backing phrases, even though you’ve played something much simpler. This is especially effective when applied to sustain- type sounds. fig.MFX-43 44: TREMOLO Tremolo cyclically modulates the volume to add tremolo effect to the sound.
85 Adding effects Effects 46:TUMBLING DLY (Tumbling Delay) This is a delay that first produces “tumbling” delayed repeats, and then echoes the original sound.
86 Adding effects note *1 fig.note_MFX1 note *2 fig.note_MFX2 Making chorus settings Regardless of the mode, only one type of chorus can be used simultaneously. There are eight types of chorus. You can select any one of these. After selecting the Type, you can change the values for each of the parameters.
87 Adding effects Effects Depth (Chorus Depth) Sets the depth at which the chorus sound is modulated. Higher values result in deeper modulation. Value: 0–127 Send Lvl to Rev (Chorus send level to reverb) Sets the amount of chorus sound that will be sent to the reverb.
88 Settings common to all modes (System Function) Settings that affect the entire operating environment of the JUNO-D, such as tuning and MIDI message reception, are referred to as system functions . This section explains how to make settings for the System functions and describes the functions of the different System parameters.
89 Settings common to all modes (System Function) System Function Functions of the system parameters System parameter functions are explained here according to the group in which they are found. Settings common to the entire system (GENERAL) LCD Contrast Adjusts the contrast of the display.
90 Settings common to all modes (System Function) Pedal (Pedal Control Assign) This specifies the function of the pedal connected to the CONTROL PEDAL jack. VALUE In addition to the items listed in Modulation Assign, you can use the pedal to apply the following effects.
91 Settings common to all modes (System Function) System Function Tx Edit Data (Transmit Edit Data Switch) Specify whether changes you make in the settings of a patch or performance will be transmitted as system exclusive messages (ON), or will not be transmitted (OFF).
92 Performing with an external MIDI device About MIDI MIDI (Musical Instrument Digital Interface) is a standard specification that allows music data to be exchanged among electronic musical instruments and computers.
93 Performing with an external MIDI device Performing with an external MIDI device Pitch Bend Change This message transmits whatever motion is made by the Pitch Bend lever. Aftertouch These messages indicates how strongly the keyboard was pressed after playing a note.
94 Performing with an external MIDI device * If you “daisy-chain” three or more MIDI devices using IN → THRU → IN → THRU ..., the MIDI signal may become garbled, and data errors may occur.
95 Performing with an external MIDI device Performing with an external MIDI device Setting the patch receive channel When you have finished connecting the external MIDI device, match JUNO-D’s Receive channel with the external MIDI device’s Transmit channel.
96 Performing with an external MIDI device Rhythm Set Using an external MIDI controller to change the JUNO-D’s tones Use of the Modulation lever, pedals, and control knobs to make changes to the JUNO-D’s tones in real time is explained in “Settings related to controllers (CONTROLLER)” (p.
97 Performing with an external MIDI device Performing with an external MIDI device 2. Use PAGE/CURSOR [ ]/[ ] to select “Local Control.” fig.r10-22_40 By holding down [SHIFT] and using PAGE/CURSOR [ ]/ [] you can quickly select the “SYSTEM|GENERAL” group (p.
98 Performing with an external MIDI device Set the same Device ID number used for recording (p. 91) If not set to the same Device ID number, the performance settings recorded at the beginning of the song cannot be received.
99 Performing with a computer Performing with a computer If you are using music software running on a computer, you can use the computer to operate the JUNO-D’s controls. Not only can you create and play back song data, you can also have Tones switch automatically.
100 Memo JUNO-D_e.book 100 ページ ２００４年６月１１日 金曜日 午後１時２１分.
101 Appendix JUNO-D_e.book 101 ページ ２００４年６月１１日 金曜日 午後１時２１分.
102 Troubleshooting If your system is not operating as you think it should be, first check the following points. If after checking these points the problem persists, consult your dealer or local Roland Service Station. * If any sort of message is being displayed on the screen during an operation, refer to “Error Messages/Messages” (p.
103 Troubleshooting Appendix Effects not being applied correctly Are the master effects switches set to OFF? (p. 65) Are the Chorus settings correct? Check the Chorus Level (p. 86), Chorus Depth (p. 87), and Chorus Send Level (p. 46, p. 58) settings. Are the Reverb settings correct? Check the Reverb Level (p.
104 Troubleshooting Cannot play phrase/arpeggios Is the MIDI clock not being received when Clock Source (p. 89) is set to MIDI? Set the system so that the MIDI clock is received from the external MIDI device. Certain MIDI devices you may have connected may not send the MIDI clock to the JUNO-D except during recording or playback.
105 Appendix Error Messages/Messages Message Meaning Action Checksum Error The checksum of a received System Exclusive mes- sage was incorrect. Set the correct checksum value. MIDI Buffer Full Due to an inordinate volume of MIDI messages re- ceived, the JUNO-D has failed to process them prop- erly.
106 Parameter list Patch parameters Patches Patch Common parameters (p. 45) Patch Tone parameters (p. 46) Patch Effects parameters * The same parameters are also provided for Rhythm sets. Parameters Value Name Patch Name space, A–Z, a–z, 0–9, ! “ # $ % & ‘ ( ) * + , - .
107 Parameter list Appendix Rhythm Patches Rhythm Common parameters (p. 52) Rhythm Tone parameters (p. 52) Performance parameters Performance Common parameters (p.
108 Parameter list Performance Part Setup parameters (p. 56) System parameters (p. 89) Send Lvl to Rev Chorus send level to reverb 0–127 Reverb effects group Type Reverb Type ROOM1, ROOM2, ROOM3, HA.
109 Appendix Original tone list No. Name Voice 0001 Piano 1 2 0002 Piano 1w 1 0003 European Pf 2 0004 JUNO-D Pno1 2 0005 JUNO-D Pno2 2 0006 Piano F 2 0007 LA Piano 4 0008 Piano 2 2 0009 Piano 2w 1 001.
110 Original tone list 0351 St.Orch Brs2 4 0352 St.Orch Brs3 4 0353 Henry IV 4 0354 Brass 1 2 0355 Brass 2 2 0356 Brite Brass 2 0357 BigBand 2 0358 Octave Brass 2 0359 JUNO-D Brs1 4 0360 JUNO-D Brs2 4 0361 JUNO-D Brs3 2 0362 JUNO-D Brs4 1 0363 Lo Brass 2 0364 TP&TB Sect 2 0365 Tp Sect 1 0366 Tb Sect 1 0367 TSax Sect 1 0368 St.
111 Appendix Patch list [1] PIANO [2] KBD & ORG No. Name Cate- gory Patch Select GM2 Patch Select Voice Key Mode MSB = 87 MSB = 121 LSB PC LSB PC 001 Pf01 JUNO-D Grand PNO 64 1 — — 2 SPLIT 002 Pf02 Soft Grand PNO 64 2 — — 2 SINGLE 003 Pf03 Bright Grand PNO 64 3 — — 2 SINGLE 004 Pf04 Dance Piano PNO 64 4 — — 2 SINGLE 005 Pf05 EL.
112 Patch list [3] GUITAR [4] ORCH 138 Ky84 Syn Mallet BEL 68 57 1 99 1 SINGLE 139 Ky85 Tinkle Bell BEL 68 75 0 113 3 SINGLE 140 Ky86 Steel Drums MLT 68 77 0 115 1 SINGLE No.
113 Patch list Appendix [5] WORLD [6] BRASS [7] VOCAL & PAD 271 Oc78 English Horn WND 68 17 0 70 1 SINGLE 272 Oc79 Bassoon WND 68 18 0 71 1 SINGLE 273 Oc80 Clarinet WND 68 19 0 72 1 SINGLE 274 Oc8.
114 Patch list [8] SYNTH 397 Vo17 Hollow Pad 1 SPD 65 120 — — 8 DUAL 398 Vo18 JP8 Hollow SPD 65 121 — — 4 SINGLE 399 Vo19 JP8Haunting SPD 65 122 — — 4 SINGLE 400 Vo20 OB2 Pad 1 SPD 65 123 .
115 Patch list Appendix [9] BASS [0] RHYTHM & SFX No. Name Cate- gory Patch Select GM2 Patch Select Voice Key Mode MSB = 87 MSB = 121 LSB PC LSB PC 522 Bs01 TB Dist Saw SBS 66 74 — — 1 SINGLE .
116 Rhythm set list [EXC]: Percussion sound of the same number will not be heard at the same time. PC: Program Number Rh01–Rh05: MSB=086, LSB=064 27 28 29 16 31 33 35 30 32 34 17 19 21 23 18 20 22 3.
117 Rhythm set list Appendix [EXC]: Percussion sound of the same number will not be heard at the same time. PC: Program Number Rh06–Rh10: MSB=086, LSB=064 27 28 29 16 31 33 35 30 32 34 17 19 21 23 1.
118 Rhythm set list [EXC]: Percussion sound of the same number will not be heard at the same time. PC: Program Number Rh11: MSB=086, LSB=064 Rh12–Rh15: MSB=120, LSB=000 27 28 29 16 31 33 35 30 32 34.
119 Rhythm set list Appendix [EXC]: Percussion sound of the same number will not be heard at the same time. PC: Program Number Rh16–Rh20: MSB=120, LSB=000 27 28 29 16 31 33 35 30 32 34 17 19 21 23 1.
120 Performance list No. Name 01 JUNO-D Stack 02 Big Power 03 Big Trance 04 Big Comb 05 Maj7 06 JUNO-D EP 07 Cosmos 08 JUNO-D SftLd 09 Fat TB 10 JUNO-60 Str 11 106 Brass 12 JU-2 Strings 13 JU-2 Clavi 14 Tekno Strng 15 80’s EPiano 16 Pizz Saw 17 JUNO-D AcGtr 18 Power B 19 Strings Sect 20 JUNO-D Choir No.
121 Arpeggio template list Appendix Category Button Name Orchestra [1] Orch Phr 1 [2] Orch Phr 2 [3] Orch Phr 3 [4] Orch Phr 4 [5] Orch Phr 5 [6] Orch Arp 1 [7] Orch Arp 2 [8] Orch Arp 3 [9] Orch Arp .
122 Arpeggio style list * Variations based on note values : 1/4, 1/8, 1/12, 1/16, 1/32 (Single and Dual) No. Name Variation 01 Note Values * 12 02 1/8 Basic 1 5 03 1/8 Basic 2 5 04 1/8 Basic 3 5 05 1/.
123 Multi-chord set list Appendix 7. Trad Min 1 8. Trad Min 2 9. Pop Min 1 10. Pop Min 2 11. Jazz Min 1 12. Jazz Min 2 13. Oct Stack 14. 4th Stack 15. 5th Stack 16. Scale Set * If you wish to modify the key of each chord set, use the Transpose function.
124 MIDI implementation chart 984 *A separate publication titled “MIDI Implementation” is also available. It provides complete details concerning the way MIDI has been implemented on this unit.
125 Appendix Specifications JUNO-D: Synthesizer Keyboard (conforms to General MIDI 2 System) Keyboard 61 keys (with velocity) [Sound Generator] Maximum Polyphony 64 voices Parts 16 * Two Tones can be assigned to each part (Patch), and can be split or layered.
126 Index A Accent Rate (Arpeggio Accent Rate) .......................... 63 Active Exp Sw (Active Expression Switch) ............... 46 ACTIVE EXPRESS (Active Expression) ..................... 32 Aftertouch ...........................................
127 Index L LCD Contrast ........................................................... 16, 89 Level Chorus Level ............................................................ 86 Part Level .................................................................
128 Index R Rate .................................................................................. 86 Receive Bank Sel (Receive Bank Select Switch) ........ 57 Receive Ch (Receive Channel) ..................................... 57 Receive Prg Chg (Receive Program Change Switch) .
129 Memo JUNO-D_e.book 129 ページ ２００４年６月１１日 金曜日 午後１時２１分.
130 Memo JUNO-D_e.book 130 ページ ２００４年６月１１日 金曜日 午後１時２１分.
2 To resize thickness, move all items on the front cover USING THE UNIT SAFELY 001 • Before using this unit, make sure to read the instructions below, and the Owner’s Manual. ........................................................................
Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. As of May 1, 2004 (Roland) ARGENTINA Instrumentos Musicales S.
Ein wichtiger Punkt beim Kauf des Geräts Roland JUNO-D (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Roland JUNO-D noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Roland JUNO-D - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Roland JUNO-D reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Roland JUNO-D erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Roland JUNO-D besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Roland JUNO-D verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Roland JUNO-D. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Roland JUNO-D gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
